From: sashiko-bot@kernel.org
To: "Maíra Canal" <mcanal@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH RFC 03/12] drm/shmem: Add a drm_gem_shmem_sync() helper
Date: Fri, 30 Oct 2026 21:11:44 +0000 [thread overview]
Message-ID: <sashiko-outbox-191514@kernel.org> (raw)
In-Reply-To: <20261030-v3d-cached-maps-v1-3-0a6a6b363382@igalia.com>
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [Critical] drm/shmem: use-after-free in drm_gem_shmem_sync() due to unlocked sgt walk
- [Critical] drm/shmem: drm_gem_shmem_sync() calls dma_sync_single_* on coalesced IOVA sgl
- [High] drm/shmem: drm_gem_shmem_sync() allocates pages on unbacked or purged BOs
--
commit d4e8dcdfcd9df9ada386f6de7bfd50169a8e2266
Author: Faith Ekstrand <faith.ekstrand@collabora.com>
drm/shmem: Add a drm_gem_shmem_sync() helper
This commit adds a drm_gem_shmem_sync() helper to synchronize CPU-mapped
shmem GEM objects between the CPU and GPU via dma_sync_single_for_device()
and dma_sync_single_for_cpu().
> diff --git a/drivers/gpu/drm/drm_gem_shmem_helper.c b/drivers/gpu/drm/drm_gem_shmem_helper.c
> index 13c4a68fdde0e..9bf727fc1c197 100644
> --- a/drivers/gpu/drm/drm_gem_shmem_helper.c
> +++ b/drivers/gpu/drm/drm_gem_shmem_helper.c
> @@ -790,6 +790,99 @@ int drm_gem_shmem_mmap(struct drm_gem_shmem_object *shmem, struct vm_area_struct
> }
> EXPORT_SYMBOL_GPL(drm_gem_shmem_mmap);
>
> +/**
> + * drm_gem_shmem_sync - Sync CPU-mapped data
> + * @shmem: shmem GEM object
> + * @offset: Offset into the GEM object
> + * @size: Size of the area to sync
> + * @type: Type of synchronization
> + *
> + * Returns:
> + * 0 on success or a negative error code on failure.
> + */
> +int drm_gem_shmem_sync(struct drm_gem_shmem_object *shmem, size_t offset,
> + size_t size, enum drm_gem_shmem_sync_type type)
> +{
> + const struct drm_device *dev = shmem->base.dev;
> + struct sg_table *sgt;
> + struct scatterlist *sgl;
> + unsigned int count;
> +
> + /* Make sure the range is in bounds. */
> + if (offset + size < offset || offset + size > shmem->base.size)
> + return -EINVAL;
> +
> + /* Disallow CPU-cache maintenance on imported buffers. */
> + if (drm_gem_is_imported(&shmem->base))
> + return -EINVAL;
> +
> + switch (type) {
> + case DRM_GEM_SHMEM_SYNC_CPU_CACHE_FLUSH:
> + case DRM_GEM_SHMEM_SYNC_CPU_CACHE_FLUSH_AND_INVALIDATE:
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + /* Don't bother if it's WC-mapped */
> + if (shmem->map_wc)
> + return 0;
> +
> + /* Nothing to do if the size is zero. */
> + if (size == 0)
> + return 0;
> +
> + sgt = drm_gem_shmem_get_pages_sgt(shmem);
> + if (IS_ERR(sgt))
> + return PTR_ERR(sgt);
[Severity: High]
Won't calling drm_gem_shmem_get_pages_sgt() here allocate backing pages and
create a DMA mapping even when the object has no backing pages yet
(!shmem->pages) or has already been purged (shmem->madv < 0)?
In drivers/gpu/drm/drm_gem_shmem_helper.c, drm_gem_shmem_get_pages_sgt()
calls drm_gem_shmem_get_pages_sgt_locked():
if (shmem->sgt)
return shmem->sgt;
drm_WARN_ON(obj->dev, drm_gem_is_imported(obj));
ret = drm_gem_shmem_get_pages_locked(shmem);
If drm_gem_shmem_sync() is called on an unbacked object, this populates
shmem->pages and shmem->sgt even though no CPU-mapped pages exist to sync.
More importantly, if the object was already purged via
drm_gem_shmem_purge_locked(), shmem->madv is -1 and shmem->sgt is NULL.
Calling drm_gem_shmem_get_pages_sgt() allocates fresh backing pages (or
increments pages_use_count on truncated pages if a VMA is still open) and
creates a new shmem->sgt while shmem->madv remains -1. Because
drm_gem_shmem_is_purgeable() in include/drm/drm_gem_shmem_helper.h checks
for shmem->madv > 0:
return (shmem->madv > 0) &&
!refcount_read(&shmem->pages_pin_count) && shmem->sgt &&
!shmem->base.dma_buf && !drm_gem_is_imported(&shmem->base);
and drm_gem_shmem_madvise_locked() ignores updates when shmem->madv < 0,
those newly allocated pages and sg_table cannot be faulted in by userspace
and can never be reclaimed by the shrinker until the GEM object is
destroyed.
Should drm_gem_shmem_sync() check under shmem->base.resv whether the object
is purged or has no pages before attempting to sync?
> +
> + for_each_sgtable_dma_sg(sgt, sgl, count) {
[Severity: Critical]
Can traversing sgt here race with drm_gem_shmem_purge_locked() and cause a
use-after-free?
In drivers/gpu/drm/drm_gem_shmem_helper.c, drm_gem_shmem_get_pages_sgt()
unlocks shmem->base.resv before returning sgt, and only increments
shmem->pages_use_count while leaving shmem->pages_pin_count at zero:
ret = dma_resv_lock_interruptible(shmem->base.resv, NULL);
if (ret)
return ERR_PTR(ret);
sgt = drm_gem_shmem_get_pages_sgt_locked(shmem);
dma_resv_unlock(shmem->base.resv);
return sgt;
For non-imported shmem objects, shmem->sgt and shmem->pages are protected by
shmem->base.resv. If userspace marks the buffer purgeable (shmem->madv > 0)
while shmem->pages_pin_count is zero, a concurrent shrinker thread calling
drm_gem_shmem_purge_locked() (or a caller invoking
__drm_gem_shmem_free_sgt_locked()) can acquire shmem->base.resv right after
drm_gem_shmem_get_pages_sgt() unlocks it:
dma_unmap_sgtable(dev->dev, shmem->sgt, DMA_BIDIRECTIONAL, 0);
sg_free_table(shmem->sgt);
kfree(shmem->sgt);
shmem->sgt = NULL;
drm_gem_shmem_put_pages_locked(shmem);
That unmaps and frees shmem->sgt and releases the backing pages while
drm_gem_shmem_sync() is walking sgt and running DMA cache maintenance in
for_each_sgtable_dma_sg().
Should drm_gem_shmem_sync() hold shmem->base.resv (using
drm_gem_shmem_get_pages_sgt_locked()) across the sg_table walk?
> + if (size == 0)
> + break;
> +
> + dma_addr_t paddr = sg_dma_address(sgl);
> + size_t len = sg_dma_len(sgl);
> +
> + if (len <= offset) {
> + offset -= len;
> + continue;
> + }
> +
> + paddr += offset;
> + len -= offset;
> + len = min_t(size_t, len, size);
> + size -= len;
> + offset = 0;
> +
> + /* It's unclear whether dma_sync_xxx() is the right API to do CPU
> + * cache maintenance given an IOMMU can register their own
> + * implementation doing more than just CPU cache flushes/invalidation,
> + * and what we really care about here is CPU caches only, but that's
> + * the best we have that is both arch-agnostic and does at least the
> + * CPU cache maintenance on a <page,offset,size> tuple.
> + *
> + * Also, I wish we could do a single
> + *
> + * dma_sync_single_for_device(BIDIR)
> + *
> + * and get a flush+invalidate, but that's not how it's implemented
> + * in practice (at least on arm64), so we have to make it
> + *
> + * dma_sync_single_for_device(TO_DEVICE)
> + * dma_sync_single_for_cpu(FROM_DEVICE)
> + *
> + * for the flush+invalidate case.
> + */
> + dma_sync_single_for_device(dev->dev, paddr, len, DMA_TO_DEVICE);
> + if (type == DRM_GEM_SHMEM_SYNC_CPU_CACHE_FLUSH_AND_INVALIDATE)
> + dma_sync_single_for_cpu(dev->dev, paddr, len, DMA_FROM_DEVICE);
[Severity: Critical]
Is it safe to pass coalesced scatterlist DMA segments (sg_dma_address(sgl)
and sg_dma_len(sgl)) to dma_sync_single_for_device() and
dma_sync_single_for_cpu() when the device is behind an IOMMU?
In drm_gem_shmem_get_pages_sgt_locked(), shmem->sgt is mapped with
dma_map_sgtable(). When dev->dev uses an IOMMU DMA domain, iommu_dma_map_sg()
coalesces physically discontiguous scatterlist entries (sgt->orig_nents) into
virtually contiguous IOVA segments (sgt->nents), so a single sg_dma_len(sgl)
entry can span multiple discontiguous physical pages.
However, in drivers/iommu/dma-iommu.c, iommu_dma_sync_single_for_cpu() and
iommu_dma_sync_single_for_device() expect a physically contiguous buffer (as
mapped by dma_map_single() or dma_map_page()) and only translate the starting
IOVA:
phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
if (!dev_is_dma_coherent(dev)) {
arch_sync_dma_for_cpu(phys, size, dir);
arch_sync_dma_flush();
}
On a non-coherent device with an IOMMU, calling dma_sync_single_for_device()
and dma_sync_single_for_cpu() across a coalesced sg_dma_len(sgl) range will
perform CPU cache maintenance on [phys, phys + len) starting from the first
page's physical address, leaving the subsequent pages of the GEM object
unsynced while flushing or invalidating unrelated physical memory adjacent
to the first page.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261030-v3d-cached-maps-v1-0-0a6a6b363382@igalia.com?part=3
next prev parent reply other threads:[~2026-10-30 21:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-30 20:50 [PATCH RFC 00/12] drm/v3d: Add support for write-back cacheable BOs Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 01/12] drm/prime: Allow custom dma_buf_ops in PRIME helpers Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 02/12] drm/shmem: Provide a generic {begin, end}_cpu_access() implementation Maíra Canal
2026-10-30 21:04 ` sashiko-bot
2026-10-30 20:50 ` [PATCH RFC 03/12] drm/shmem: Add a drm_gem_shmem_sync() helper Maíra Canal
2026-10-30 21:11 ` sashiko-bot [this message]
2026-10-30 20:50 ` [PATCH RFC 04/12] drm/panfrost: Use PRIME helpers with custom dma_buf_ops Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 05/12] drm/panfrost: Use common shmem helpers for dma_buf CPU access Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 06/12] drm/panfrost: Use drm_gem_shmem_sync() Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 07/12] drm/panthor: Use PRIME helpers with custom dma_buf_ops Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 08/12] drm/amdgpu: Use drm_gem_prime_export_with_ops() Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 09/12] drm/v3d: Provide a custom dma_buf implementation Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 10/12] drm/v3d: Add flag to map BOs write-back cacheable Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 11/12] drm/v3d: Add a DRM_IOCTL_V3D_SYNC_BO ioctl Maíra Canal
2026-10-30 20:50 ` [PATCH RFC 12/12] drm/v3d: Advertise support for write-back cacheable BOs Maíra Canal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-191514@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=mcanal@igalia.com \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox