From: sashiko-bot@kernel.org
To: "Maíra Canal" <mcanal@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v2 2/3] drm/vc4: Complete async page flips from an ordered workqueue
Date: Sat, 14 Nov 2026 19:40:45 +0000 [thread overview]
Message-ID: <sashiko-outbox-214979@kernel.org> (raw)
In-Reply-To: <20261114-vc4-async-flip-fixes-v2-2-d33cbe99ed5d@igalia.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [High] drm/vc4: inline flip in vc4_async_set_fence_cb() races with
pending flips
--
commit 6426f110104db1e4dcc5dd10cee848879c7ef9a8
Author: Maíra Canal <mcanal@igalia.com>
drm/vc4: Complete async page flips from an ordered workqueue
This commit defers async page flip completion from the dma_fence callback
to a per-CRTC ordered workqueue so completion work that may sleep does not
run in interrupt context.
> diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
> index c558b527c7e60..177ee27ab6d15 100644
> --- a/drivers/gpu/drm/vc4/vc4_crtc.c
> +++ b/drivers/gpu/drm/vc4/vc4_crtc.c
[ ... ]
> @@ -930,17 +933,19 @@ vc4_async_page_flip_complete(struct vc4_async_flip_state *flip_state)
> drm_framebuffer_put(flip_state->old_fb);
> }
>
> + dma_fence_put(flip_state->fence);
> kfree(flip_state);
> }
>
> -static void vc4_async_page_flip_fence_complete(struct dma_fence *fence,
> - struct dma_fence_cb *cb)
> +static void vc4_async_page_flip_fence_cb(struct dma_fence *fence,
> + struct dma_fence_cb *cb)
> {
> struct vc4_async_flip_state *flip_state =
> container_of(cb, struct vc4_async_flip_state, cb);
> + struct vc4_crtc *vc4_crtc = to_vc4_crtc(flip_state->crtc);
>
> - vc4_async_page_flip_complete(flip_state);
> - dma_fence_put(fence);
> + /* Completing the flip may sleep, so defer it to a worker. */
> + queue_work(vc4_crtc->async_flip_wq, &flip_state->work);
> }
>
> static int vc4_async_set_fence_cb(struct drm_device *dev,
> @@ -948,23 +953,26 @@ static int vc4_async_set_fence_cb(struct drm_device *dev,
> {
> struct drm_framebuffer *fb = flip_state->fb;
> struct drm_gem_dma_object *dma_bo = drm_fb_dma_get_gem_obj(fb, 0);
> - struct dma_fence *fence;
> + struct vc4_crtc *vc4_crtc = to_vc4_crtc(flip_state->crtc);
> int ret;
>
> - ret = dma_resv_get_singleton(dma_bo->base.resv, DMA_RESV_USAGE_READ, &fence);
> + INIT_WORK(&flip_state->work, vc4_async_page_flip_work);
> +
> + ret = dma_resv_get_singleton(dma_bo->base.resv, DMA_RESV_USAGE_READ,
> + &flip_state->fence);
> if (ret)
> return ret;
>
> - /* If there's no fence, complete the page flip immediately */
> - if (!fence) {
> - vc4_async_page_flip_fence_complete(fence, &flip_state->cb);
> + if (flip_state->fence &&
> + !dma_fence_add_callback(flip_state->fence, &flip_state->cb,
> + vc4_async_page_flip_fence_cb))
> return 0;
> - }
>
> - /* If the fence has already been completed, complete the page flip */
> - if (dma_fence_add_callback(fence, &flip_state->cb,
> - vc4_async_page_flip_fence_complete))
> - vc4_async_page_flip_fence_complete(fence, &flip_state->cb);
> + /* No fence or the fence has already signaled. Complete the flip
> + * immediately, after earlier queued flips.
> + */
> + flush_workqueue(vc4_crtc->async_flip_wq);
> + vc4_async_page_flip_work(&flip_state->work);
[Severity: High]
Can an inline vc4_async_page_flip_work() call here race with or overtake
an earlier async flip on the same CRTC?
flush_workqueue() only waits for work items already queued on
vc4_crtc->async_flip_wq. If an earlier flip (flip1, to fb1) registered
vc4_async_page_flip_fence_cb() on an unsignaled fence, flip1->work is not
queued until that fence signals. If a second async flip (flip2, to fb2)
on the same CRTC has no fence or an already-signaled fence:
CPU0 CPU1 (irq / kworker)
vc4_async_page_flip_common() [flip1]
flip1->old_fb = fb0
plane->state->fb = fb1
dma_fence_add_callback(fence1, ...)
vc4_async_page_flip_common() [flip2]
flip2->old_fb = fb1
plane->state->fb = fb2
flush_workqueue(async_flip_wq)
vc4_async_page_flip_work(&flip2->work)
vc4_plane_async_set_fb(plane, fb2)
vc4_bo_dec_usecnt(fb1)
drm_framebuffer_put(fb1)
dma_fence_signal(fence1)
queue_work(..., &flip1->work)
vc4_async_page_flip_work(&flip1->work)
vc4_plane_async_set_fb(plane, fb1)
drm_framebuffer_put(fb1)
<-- HVS scans out unreferenced fb1
flip2 completes before flip1 and drops the old_fb reference and BO usecnt
for fb1. When flip1->work later runs, it overwrites the HVS scanout
address back to fb1 and drops flip1->fb, leaving the HVS scanning out fb1
after its flip references and BO usecnt have been released.
If fence1 signals while flip2 is past flush_workqueue(), both
vc4_async_page_flip_work() instances also run concurrently on the same
plane and update vc4_state->hw_dlist and vc4_state->dlist in
vc4_plane_async_set_fb() without locking.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261114-vc4-async-flip-fixes-v2-0-d33cbe99ed5d@igalia.com?part=2
next prev parent reply other threads:[~2026-11-14 19:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-14 19:16 [PATCH v2 0/3] drm/vc4: Fix async page flip completion Maíra Canal
2026-11-14 19:16 ` [PATCH v2 1/3] drm/vc4: Drop BO usecnt before releasing the old FB Maíra Canal
2026-11-14 19:16 ` [PATCH v2 2/3] drm/vc4: Complete async page flips from an ordered workqueue Maíra Canal
2026-11-14 19:40 ` sashiko-bot [this message]
2026-11-14 19:16 ` [PATCH v2 3/3] drm/vc4: Look up the async page flip fence before committing the flip Maíra Canal
2026-11-16 11:01 ` [PATCH v2 0/3] drm/vc4: Fix async page flip completion Iago Toral
2026-11-17 21:21 ` Maíra Canal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-214979@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=mcanal@igalia.com \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox