From: sashiko-bot@kernel.org
To: "Adil Hüsrev Tepe" <tadilhusrev@gmail.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v1 2/2] drm/panel: add Novatek NT36525 panel driver
Date: Mon, 16 Nov 2026 07:22:30 +0000 [thread overview]
Message-ID: <sashiko-outbox-216407@kernel.org> (raw)
In-Reply-To: <20261116070212.314228-3-tadilhusrev@gmail.com>
Thank you for your contribution! Sashiko AI review found 4 potential
issues to consider:
- [High] drm/panel: missing prepare_prev_first = true in nt36525_probe()
- [Medium] drm/panel: vpos, vneg, and backlight in nt36525_probe()
mismatch DT binding
- [Medium] drm/panel: inverted gpiod logical polarity for reset_gpio in
nt36525
- [Low] drm/panel: negative return and open-coded helper in
nt36525_get_modes()
--
commit bba87e5acae9fff577a4366212e7273dead1f8e4
Author: Adil Hüsrev Tepe <tadilhusrev@gmail.com>
drm/panel: add Novatek NT36525 panel driver
This commit adds a DRM panel driver for Novatek NT36525-based MIPI-DSI
video-mode panels used in the Samsung Galaxy XCover5.
> diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36525.c b/drivers/gpu/drm/panel/panel-novatek-nt36525.c
> new file mode 100644
> index 0000000000000..246476af49b15
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-novatek-nt36525.c
[ ... ]
> +static int nt36525_prepare(struct drm_panel *panel)
> +{
> + struct nt36525 *p = panel_to_nt36525(panel);
> + int ret;
> +
> + /* Power-up sequence from Samsung decon_board_nt36525 panel_power_enable */
> + ret = regulator_enable(p->vdd);
> + if (ret)
> + return ret;
> + usleep_range(1000, 1500);
> + ret = regulator_enable(p->vpos);
> + if (ret)
> + goto disable_vdd;
> + usleep_range(1000, 1500);
> + ret = regulator_enable(p->vneg);
> + if (ret)
> + goto disable_vpos;
> + usleep_range(1000, 1500);
> +
> + /* Reset pulse, Samsung sequence from panel_reset */
> + usleep_range(10000, 11000);
> + gpiod_set_value_cansleep(p->reset_gpio, 1);
> + usleep_range(1000, 1500);
> + gpiod_set_value_cansleep(p->reset_gpio, 0);
> + usleep_range(3500, 4000);
> + gpiod_set_value_cansleep(p->reset_gpio, 1);
> + usleep_range(10000, 11000);
> +
> + ret = nt36525_on(p);
> + if (ret)
> + goto fail;
> +
> + return 0;
> +
> +fail:
> + gpiod_set_value_cansleep(p->reset_gpio, 0);
> + regulator_disable(p->vneg);
> + usleep_range(1000, 1500);
> +disable_vpos:
> + regulator_disable(p->vpos);
> + usleep_range(5000, 5500);
> +disable_vdd:
> + regulator_disable(p->vdd);
> + return ret;
> +}
> +
> +static int nt36525_unprepare(struct drm_panel *panel)
> +{
> + struct nt36525 *p = panel_to_nt36525(panel);
> + struct mipi_dsi_multi_context ctx = { .dsi = p->dsi };
> +
> + mipi_dsi_dcs_set_display_off_multi(&ctx);
> + mipi_dsi_msleep(&ctx, 20);
> + mipi_dsi_dcs_enter_sleep_mode_multi(&ctx);
> + mipi_dsi_msleep(&ctx, 60);
> +
> + usleep_range(3000, 3500);
> + regulator_disable(p->vneg);
> + usleep_range(1000, 1500);
> + regulator_disable(p->vpos);
> + usleep_range(5000, 5500);
> + regulator_disable(p->vdd);
> + msleep(30);
> + gpiod_set_value_cansleep(p->reset_gpio, 0);
> + return 0;
> +}
[Severity: Medium]
Are the gpiod logical states for p->reset_gpio inverted across
nt36525_prepare(), nt36525_unprepare(), and nt36525_probe()?
As noted in the comment in nt36525_probe() ("Request RESX released (high)
rather than asserting it here"), the hardware RESX pin is active-low
(physical 0 asserts reset, physical 1 releases it). Under the gpiod API
and panel-common.yaml, logical 1 (GPIOD_OUT_HIGH) means reset asserted and
logical 0 (GPIOD_OUT_LOW) means reset deasserted, with the physical
inversion described via GPIO_ACTIVE_LOW in Device Tree.
Passing physical levels directly means a Device Tree using standard
GPIO_ACTIVE_LOW polarity holds the panel in reset during nt36525_on() and
releases reset when powering off, or else has to misdeclare the active-low
pin as GPIO_ACTIVE_HIGH.
> +static int nt36525_get_modes(struct drm_panel *panel, struct drm_connector *conn)
> +{
> + struct drm_display_mode *m;
> +
> + m = drm_mode_duplicate(conn->dev, &nt36525_xcover5_mode);
> + if (!m)
> + return -ENOMEM;
> + drm_mode_set_name(m);
> + drm_mode_probed_add(conn, m);
> + conn->display_info.width_mm = m->width_mm;
> + conn->display_info.height_mm = m->height_mm;
> + return 1;
> +}
[Severity: Low]
Can nt36525_get_modes() use drm_connector_helper_get_modes_fixed(conn,
&nt36525_xcover5_mode) instead of open-coding mode duplication?
drm_helper_probe_get_modes() expects .get_modes() callbacks to return the
number of modes (0 on failure) and logs a drm_err() if a negative error
code such as -ENOMEM is returned. drm_connector_helper_get_modes_fixed()
handles duplicating the mode, setting its name, updating display_info
dimensions, and returning 0 on failure.
[ ... ]
> +static int nt36525_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct nt36525 *p;
> + int ret;
> +
> + p = devm_drm_panel_alloc(dev, struct nt36525, panel, &nt36525_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> + if (IS_ERR(p))
> + return PTR_ERR(p);
> +
> + p->dsi = dsi;
> + ret = drm_panel_of_backlight(&p->panel);
> + if (ret)
> + return ret;
> +
> + p->vdd = devm_regulator_get(dev, "vdd");
> + if (IS_ERR(p->vdd))
> + return dev_err_probe(dev, PTR_ERR(p->vdd), "vdd supply\n");
> +
> + p->vpos = devm_regulator_get(dev, "vpos");
> + if (IS_ERR(p->vpos))
> + return dev_err_probe(dev, PTR_ERR(p->vpos), "vpos supply\n");
> +
> + p->vneg = devm_regulator_get(dev, "vneg");
> + if (IS_ERR(p->vneg))
> + return dev_err_probe(dev, PTR_ERR(p->vneg), "vneg supply\n");
[Severity: Medium]
Do the vpos, vneg, and backlight properties requested here match the DT
binding in Documentation/devicetree/bindings/display/panel/novatek,nt36525.yaml?
The binding schema only defines compatible, reg, reset-gpios, vdd-supply,
and port with additionalProperties: false. A Device Tree conforming to
that schema will lack vpos-supply, vneg-supply, and backlight, causing
devm_regulator_get() to fall back to dummy regulators with a warning
(leaving the positive and negative LCD bias supplies unswitched) and
drm_panel_of_backlight() to find no backlight, while a Device Tree that
includes them will fail dtbs_check.
[ ... ]
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO /* video (non-burst) */
> + | MIPI_DSI_MODE_VIDEO_SYNC_PULSE
> + | MIPI_DSI_MODE_LPM /* force LP for all transfers */
> + | MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> + drm_panel_add(&p->panel);
[Severity: High]
Should p->panel.prepare_prev_first = true be set before calling
drm_panel_add(&p->panel)?
drm_panel_add() copies panel->prepare_prev_first into
panel->bridge.pre_enable_prev_first. Because it is left false,
drm_atomic_bridge_chain_pre_enable() calls nt36525_prepare() ->
nt36525_on() before the upstream DSI host bridge's atomic_pre_enable()
callback, and drm_atomic_bridge_chain_post_disable() disables the upstream
DSI host bridge before nt36525_unprepare() sends display-off and sleep-in
commands. On bridge-based DSI hosts such as samsung-dsim, transfers sent
while DSIM_STATE_ENABLED is cleared are rejected by
samsung_dsim_host_transfer() with -EINVAL, causing panel bring-up and
power-down to fail.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261116070212.314228-1-tadilhusrev@gmail.com?part=2
prev parent reply other threads:[~2026-11-16 7:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 7:02 [PATCH v1 0/2] drm/panel: add Novatek NT36525 (Samsung Galaxy XCover5) Adil Hüsrev Tepe
2026-11-16 7:02 ` [PATCH v1 1/2] dt-bindings: display: panel: add Novatek NT36525 Adil Hüsrev Tepe
2026-11-16 7:14 ` sashiko-bot
2026-11-16 7:02 ` [PATCH v1 2/2] drm/panel: add Novatek NT36525 panel driver Adil Hüsrev Tepe
2026-11-16 7:22 ` sashiko-bot [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-216407@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=tadilhusrev@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox