[PATCH v2 11/16] power: sequencing: pcie-m2: Add usb and sdio targets for E-key connector

[Chen-Yu Tsai <wenst@chromium.org>]

The M.2 E-key connector allows either PCIe or SDIO for WiFi and USB or
UART for BT. Currently the driver only supports PCIe and UART.

Add power sequencing targets for SDIO and USB. To avoid adding a
complicated dependency tree, rename the existing power sequencing units
"pcie" and "uart" to "wifi" and "bt". The existing target names are left
untouched. The new "sdio" and "usb" targets just point to the renamed
"wifi" and "bt" units.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
 drivers/power/sequencing/pwrseq-pcie-m2.c | 41 +++++++++++++++--------
 1 file changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/power/sequencing/pwrseq-pcie-m2.c b/drivers/power/sequencing/pwrseq-pcie-m2.c
index 49293376956b..a21a3dbe8a5d 100644
--- a/drivers/power/sequencing/pwrseq-pcie-m2.c
+++ b/drivers/power/sequencing/pwrseq-pcie-m2.c
@@ -70,46 +70,46 @@ static const struct pwrseq_unit_data *pwrseq_pcie_m2_unit_deps[] = {
 	NULL
 };
 
-static int pwrseq_pci_m2_e_uart_enable(struct pwrseq_device *pwrseq)
+static int pwrseq_pci_m2_e_bt_enable(struct pwrseq_device *pwrseq)
 {
 	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
 
 	return gpiod_set_value_cansleep(ctx->w_disable2_gpio, 0);
 }
 
-static int pwrseq_pci_m2_e_uart_disable(struct pwrseq_device *pwrseq)
+static int pwrseq_pci_m2_e_bt_disable(struct pwrseq_device *pwrseq)
 {
 	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
 
 	return gpiod_set_value_cansleep(ctx->w_disable2_gpio, 1);
 }
 
-static const struct pwrseq_unit_data pwrseq_pcie_m2_e_uart_unit_data = {
-	.name = "uart-enable",
+static const struct pwrseq_unit_data pwrseq_pcie_m2_e_bt_unit_data = {
+	.name = "bt-enable",
 	.deps = pwrseq_pcie_m2_unit_deps,
-	.enable = pwrseq_pci_m2_e_uart_enable,
-	.disable = pwrseq_pci_m2_e_uart_disable,
+	.enable = pwrseq_pci_m2_e_bt_enable,
+	.disable = pwrseq_pci_m2_e_bt_disable,
 };
 
-static int pwrseq_pci_m2_e_pcie_enable(struct pwrseq_device *pwrseq)
+static int pwrseq_pci_m2_e_wifi_enable(struct pwrseq_device *pwrseq)
 {
 	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
 
 	return gpiod_set_value_cansleep(ctx->w_disable1_gpio, 0);
 }
 
-static int pwrseq_pci_m2_e_pcie_disable(struct pwrseq_device *pwrseq)
+static int pwrseq_pci_m2_e_wifi_disable(struct pwrseq_device *pwrseq)
 {
 	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
 
 	return gpiod_set_value_cansleep(ctx->w_disable1_gpio, 1);
 }
 
-static const struct pwrseq_unit_data pwrseq_pcie_m2_e_pcie_unit_data = {
-	.name = "pcie-enable",
+static const struct pwrseq_unit_data pwrseq_pcie_m2_e_wifi_unit_data = {
+	.name = "wifi-enable",
 	.deps = pwrseq_pcie_m2_unit_deps,
-	.enable = pwrseq_pci_m2_e_pcie_enable,
-	.disable = pwrseq_pci_m2_e_pcie_disable,
+	.enable = pwrseq_pci_m2_e_wifi_enable,
+	.disable = pwrseq_pci_m2_e_wifi_disable,
 };
 
 static const struct pwrseq_unit_data pwrseq_pcie_m2_m_pcie_unit_data = {
@@ -131,13 +131,24 @@ static int pwrseq_pcie_m2_e_pwup_delay(struct pwrseq_device *pwrseq)
 
 static const struct pwrseq_target_data pwrseq_pcie_m2_e_uart_target_data = {
 	.name = "uart",
-	.unit = &pwrseq_pcie_m2_e_uart_unit_data,
+	.unit = &pwrseq_pcie_m2_e_bt_unit_data,
 	.post_enable = pwrseq_pcie_m2_e_pwup_delay,
 };
 
+static const struct pwrseq_target_data pwrseq_pcie_m2_e_usb_target_data = {
+	.name = "usb",
+	.unit = &pwrseq_pcie_m2_e_bt_unit_data,
+};
+
 static const struct pwrseq_target_data pwrseq_pcie_m2_e_pcie_target_data = {
 	.name = "pcie",
-	.unit = &pwrseq_pcie_m2_e_pcie_unit_data,
+	.unit = &pwrseq_pcie_m2_e_wifi_unit_data,
+	.post_enable = pwrseq_pcie_m2_e_pwup_delay,
+};
+
+static const struct pwrseq_target_data pwrseq_pcie_m2_e_sdio_target_data = {
+	.name = "sdio",
+	.unit = &pwrseq_pcie_m2_e_wifi_unit_data,
 	.post_enable = pwrseq_pcie_m2_e_pwup_delay,
 };
 
@@ -148,7 +159,9 @@ static const struct pwrseq_target_data pwrseq_pcie_m2_m_pcie_target_data = {
 
 static const struct pwrseq_target_data *pwrseq_pcie_m2_e_targets[] = {
 	&pwrseq_pcie_m2_e_pcie_target_data,
+	&pwrseq_pcie_m2_e_sdio_target_data,
 	&pwrseq_pcie_m2_e_uart_target_data,
+	&pwrseq_pcie_m2_e_usb_target_data,
 	NULL
 };
 
-- 
2.54.0.1099.g489fc7bff1-goog