From: eugene.loh@oracle.com
To: dtrace@lists.linux.dev, dtrace-devel@oss.oracle.com
Subject: [PATCH 15/22] test: Clean up the specsize tests
Date: Thu, 29 Aug 2024 01:22:12 -0400 [thread overview]
Message-ID: <20240829052219.3234-15-eugene.loh@oracle.com> (raw)
In-Reply-To: <20240829052219.3234-1-eugene.loh@oracle.com>
From: Eugene Loh <eugene.loh@oracle.com>
The tests had actions like
printf("%lld: Lots of data\n", x);
printf("%lld: Has to be crammed into this buffer\n", x);
printf("%lld: Until it overflows\n", x);
printf("%lld: And causes flops\n", x);
suggesting that these strings were crowding the buffer, but these
strings are not passed from producer to consumer at all.
The tests also only tested one clause per speculation. It would be
nice also to test multiple clauses per speculation.
There is much replicated code from one of the tests to the other, a
shortcoming that is amplified if we want to test more specsize values,
which is the case when we test multiple clauses per speculation.
Therefore, replace the multiple tests with a single test that checks
multiple clauses per speculation and more values of specsize.
Signed-off-by: Eugene Loh <eugene.loh@oracle.com>
---
.../speculation/tst.SpecSizeVariations.r | 68 +++++++++++++++++
.../speculation/tst.SpecSizeVariations.sh | 74 +++++++++++++++++++
.../speculation/tst.SpecSizeVariations4.d | 66 -----------------
.../speculation/tst.SpecSizeVariations4.r | 5 --
.../speculation/tst.SpecSizeVariations5.d | 61 ---------------
.../speculation/tst.SpecSizeVariations5.r | 7 --
6 files changed, 142 insertions(+), 139 deletions(-)
create mode 100644 test/unittest/speculation/tst.SpecSizeVariations.r
create mode 100755 test/unittest/speculation/tst.SpecSizeVariations.sh
delete mode 100644 test/unittest/speculation/tst.SpecSizeVariations4.d
delete mode 100644 test/unittest/speculation/tst.SpecSizeVariations4.r
delete mode 100644 test/unittest/speculation/tst.SpecSizeVariations5.d
delete mode 100644 test/unittest/speculation/tst.SpecSizeVariations5.r
diff --git a/test/unittest/speculation/tst.SpecSizeVariations.r b/test/unittest/speculation/tst.SpecSizeVariations.r
new file mode 100644
index 00000000..51f0596c
--- /dev/null
+++ b/test/unittest/speculation/tst.SpecSizeVariations.r
@@ -0,0 +1,68 @@
+Speculative buffer ID: 1
+counts: 0 1
+
+Speculative buffer ID: 1
+123456700
+123456701
+123456702
+123456703
+123456704
+123456705
+123456706
+counts: 1 1
+
+Speculative buffer ID: 1
+123456700
+123456701
+123456702
+123456703
+123456704
+123456705
+123456706
+counts: 1 1
+
+Speculative buffer ID: 1
+123456700
+123456701
+123456702
+123456703
+123456704
+123456705
+123456706
+counts: 2 1
+
+Speculative buffer ID: 1
+123456700
+123456701
+123456702
+123456703
+123456704
+123456705
+123456706
+counts: 2 1
+
+Speculative buffer ID: 1
+123456700
+123456701
+123456702
+123456703
+123456704
+123456705
+123456706
+123456800
+123456801
+123456802
+123456803
+123456804
+123456805
+123456806
+123456807
+123456808
+counts: 2 1
+
+-- @@stderr --
+dtrace: 2 speculative drops
+dtrace: 1 speculative drop
+dtrace: 1 speculative drop
+dtrace: 1 speculative drop
+dtrace: 1 speculative drop
diff --git a/test/unittest/speculation/tst.SpecSizeVariations.sh b/test/unittest/speculation/tst.SpecSizeVariations.sh
new file mode 100755
index 00000000..75e527d9
--- /dev/null
+++ b/test/unittest/speculation/tst.SpecSizeVariations.sh
@@ -0,0 +1,74 @@
+#!/bin/bash
+
+#
+# Oracle Linux DTrace.
+# Copyright (c) 2024, Oracle and/or its affiliates. All rights reserved.
+# Licensed under the Universal Permissive License v 1.0 as shown at
+# http://oss.oracle.com/licenses/upl.
+#
+
+dtrace=$1
+
+for x in 63 64 79 80 143 144; do
+ $dtrace $dt_flags -xspecsize=$x -qn '
+ BEGIN
+ {
+ x = 123456700ll;
+ self->nspeculate = 0;
+ self->ncommit = 0;
+ self->spec = speculation();
+ printf("Speculative buffer ID: %d\n", self->spec);
+ }
+
+ /* 16 + 7 * 8 = 72 bytes */
+ BEGIN
+ {
+ speculate(self->spec);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ self->nspeculate++;
+ }
+
+ BEGIN
+ {
+ x = 123456800ll;
+ }
+
+ /* 16 + 9 * 8 = 88 bytes */
+ BEGIN
+ {
+ speculate(self->spec);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ printf("%lld\n", x++);
+ self->nspeculate++;
+ }
+
+ BEGIN
+ {
+ commit(self->spec);
+ self->ncommit++;
+ }
+
+ BEGIN
+ {
+ printf("counts: %d %d\n", self->nspeculate, self->ncommit);
+ exit(0);
+ }
+
+ ERROR
+ {
+ exit(1);
+ }'
+done
diff --git a/test/unittest/speculation/tst.SpecSizeVariations4.d b/test/unittest/speculation/tst.SpecSizeVariations4.d
deleted file mode 100644
index 4221c89e..00000000
--- a/test/unittest/speculation/tst.SpecSizeVariations4.d
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Oracle Linux DTrace.
- * Copyright (c) 2006, 2023, Oracle and/or its affiliates. All rights reserved.
- * Licensed under the Universal Permissive License v 1.0 as shown at
- * http://oss.oracle.com/licenses/upl.
- */
-
-/*
- * ASSERTION:
- * Verify the behavior of speculations with changes in specsize.
- *
- * SECTION: Speculative Tracing/Options and Tuning;
- * Options and Tunables/specsize
- *
- */
-
-#pragma D option quiet
-#pragma D option specsize=39
-
-long long x;
-
-BEGIN
-{
- x = 123456789;
- self->speculateFlag = 0;
- self->commitFlag = 0;
- self->spec = speculation();
- printf("Speculative buffer ID: %d\n", self->spec);
-}
-
-BEGIN
-{
- speculate(self->spec);
- printf("%lld: Lots of data\n", x);
- printf("%lld: Has to be crammed into this buffer\n", x);
- printf("%lld: Until it overflows\n", x);
- printf("%lld: And causes flops\n", x);
- self->speculateFlag++;
-
-}
-
-BEGIN
-/1 <= self->speculateFlag/
-{
- commit(self->spec);
- self->commitFlag++;
-}
-
-BEGIN
-/1 <= self->commitFlag/
-{
- printf("Statement was executed\n");
- exit(1);
-}
-
-BEGIN
-/1 > self->commitFlag/
-{
- printf("Statement wasn't executed\n");
- exit(0);
-}
-
-ERROR
-{
- exit(1);
-}
diff --git a/test/unittest/speculation/tst.SpecSizeVariations4.r b/test/unittest/speculation/tst.SpecSizeVariations4.r
deleted file mode 100644
index 7c4bb3b7..00000000
--- a/test/unittest/speculation/tst.SpecSizeVariations4.r
+++ /dev/null
@@ -1,5 +0,0 @@
-Speculative buffer ID: 1
-Statement wasn't executed
-
--- @@stderr --
-dtrace: 1 speculative drop
diff --git a/test/unittest/speculation/tst.SpecSizeVariations5.d b/test/unittest/speculation/tst.SpecSizeVariations5.d
deleted file mode 100644
index fb71dfed..00000000
--- a/test/unittest/speculation/tst.SpecSizeVariations5.d
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Oracle Linux DTrace.
- * Copyright (c) 2006, 2021, Oracle and/or its affiliates. All rights reserved.
- * Licensed under the Universal Permissive License v 1.0 as shown at
- * http://oss.oracle.com/licenses/upl.
- */
-
-/*
- * ASSERTION:
- * Verify the behavior of speculations with changes in specsize.
- *
- * SECTION: Speculative Tracing/Options and Tuning;
- * Options and Tunables/specsize
- *
- */
-
-#pragma D option quiet
-#pragma D option specsize=40
-
-long long x;
-
-BEGIN
-{
- x = 123456789;
- self->speculateFlag = 0;
- self->commitFlag = 0;
- self->spec = speculation();
- printf("Speculative buffer ID: %d\n", self->spec);
-}
-
-BEGIN
-{
- speculate(self->spec);
- printf("%lld: Lots of data\n", x);
- printf("%lld: Has to be crammed into this buffer\n", x);
- printf("%lld: Until it overflows\n", x);
- printf("%lld: And causes flops\n", x);
- self->speculateFlag++;
-
-}
-
-BEGIN
-/1 <= self->speculateFlag/
-{
- commit(self->spec);
- self->commitFlag++;
-}
-
-BEGIN
-/1 <= self->commitFlag/
-{
- printf("Statement was executed\n");
- exit(0);
-}
-
-BEGIN
-/1 > self->commitFlag/
-{
- printf("Statement wasn't executed\n");
- exit(1);
-}
diff --git a/test/unittest/speculation/tst.SpecSizeVariations5.r b/test/unittest/speculation/tst.SpecSizeVariations5.r
deleted file mode 100644
index d09013a2..00000000
--- a/test/unittest/speculation/tst.SpecSizeVariations5.r
+++ /dev/null
@@ -1,7 +0,0 @@
-Speculative buffer ID: 1
-123456789: Lots of data
-123456789: Has to be crammed into this buffer
-123456789: Until it overflows
-123456789: And causes flops
-Statement was executed
-
--
2.43.5
next prev parent reply other threads:[~2024-08-29 5:22 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-29 5:21 [PATCH 01/22] test: Handle dtrace:::ERROR arg3 specially eugene.loh
2024-08-29 5:21 ` [PATCH 02/22] test: Clean up tests still expecting obsolete "at DIF offset NN" eugene.loh
2024-08-29 5:22 ` [PATCH 03/22] Action clear() should clear only one aggregation eugene.loh
2024-09-06 21:43 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 04/22] Remove unused "next" arg from dt_flowindent() eugene.loh
2024-09-06 22:01 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 05/22] Set the ERROR PRID in BPF code eugene.loh
2024-09-07 0:20 ` Kris Van Hees
2024-09-07 1:25 ` Eugene Loh
2024-09-07 2:03 ` Kris Van Hees
2024-09-12 20:33 ` Kris Van Hees
2024-09-13 17:21 ` Eugene Loh
2024-08-29 5:22 ` [PATCH 06/22] Fix provider lookup to use prv not prb eugene.loh
2024-09-13 20:01 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 07/22] Supply a default probe_info() eugene.loh
2024-09-14 0:31 ` Kris Van Hees
2024-09-14 1:59 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 08/22] dtprobed: Fix comment typo eugene.loh
2024-09-14 15:41 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 09/22] Clean up dtsd_* members eugene.loh
2024-09-14 15:40 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 10/22] Simplify dtrace_stmt_create() attr init eugene.loh
2024-09-14 16:25 ` Kris Van Hees
2024-09-14 16:32 ` [DTrace-devel] " Kris Van Hees
2024-09-19 17:38 ` Eugene Loh
2024-09-19 17:42 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 11/22] DTPPT_POST_OFFSETS is unused eugene.loh
2024-09-14 16:35 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 12/22] Remove apparently redundant assignment eugene.loh
2024-09-14 16:37 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 13/22] Eliminate unused args to dt_spec_buf_add_data() eugene.loh
2024-09-14 17:06 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 14/22] Both dted_uarg and dofe_uarg are unused eugene.loh
2024-09-14 17:08 ` Kris Van Hees
2024-08-29 5:22 ` eugene.loh [this message]
2024-09-14 17:57 ` [PATCH 15/22] test: Clean up the specsize tests Kris Van Hees
2024-08-29 5:22 ` [PATCH 16/22] test: Fix the speculative tests that checked bufsize eugene.loh
2024-09-14 18:00 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 17/22] test: Tweak spec sizes to bracket size jumps more narrowly eugene.loh
2024-09-14 18:07 ` Kris Van Hees
2024-09-17 18:05 ` Eugene Loh
2024-08-29 5:22 ` [PATCH 18/22] test: Remove tst.DTRACEFLT_BADADDR2.d dependency on specific PC eugene.loh
2024-09-14 18:10 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 19/22] test: Fix tst.probestar.d trigger eugene.loh
2024-09-14 18:13 ` Kris Van Hees
2024-10-17 22:53 ` Eugene Loh
2024-08-29 5:22 ` [PATCH 20/22] test: Annotate some XFAILs eugene.loh
2024-09-14 18:29 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 21/22] test: Fix DIRNAME eugene.loh
2024-08-29 20:25 ` [DTrace-devel] " Sam James
2024-09-14 18:43 ` Kris Van Hees
2024-08-29 5:22 ` [PATCH 22/22] test: Update tst.newprobes.sh xfail message eugene.loh
2024-09-14 18:45 ` Kris Van Hees
2024-08-29 15:57 ` [PATCH 01/22] test: Handle dtrace:::ERROR arg3 specially Kris Van Hees
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240829052219.3234-15-eugene.loh@oracle.com \
--to=eugene.loh@oracle.com \
--cc=dtrace-devel@oss.oracle.com \
--cc=dtrace@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox