Re: [PATCH v4 1/5] generic/392: Add copy to new file test

[Eryu Guan <eguan@redhat.com>]

Hi Anna,

On Thu, Dec 08, 2016 at 01:49:04PM -0500, Anna Schumaker wrote:
> This test copies data from various points in a source file to a new
> file.  This is useful for testing the basics of copy_file_range().
> 
> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Sorry for the late review. I tested this patchset on 4.9 kernel and
xfs_io with your return code fix applied.

I met some common failures/behaviors in these tests, so I only comment
on this patch.

> ---
>  common/rc             |   6 +++
>  tests/generic/392     | 102 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/generic/392.out |  26 +++++++++++++
>  tests/generic/group   |   1 +
>  4 files changed, 135 insertions(+)
>  create mode 100755 tests/generic/392
>  create mode 100644 tests/generic/392.out
> 
> diff --git a/common/rc b/common/rc
> index 8c99306..7c5d2a8 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -2054,6 +2054,12 @@ _require_xfs_io_command()
>  	"chproj")
>  		testio=`$XFS_IO_PROG -F -f -c "chproj 0" $testfile 2>&1`
>  		;;
> +	"copy_range")
> +		testcopy=$TEST_DIR/$$.copy.xfs_io
> +		$XFS_IO_PROG -F -f -c "pwrite 0 4k" $testfile 2>&1 > /dev/null
> +		testio=`$XFS_IO_PROG -F -f -c "copy_range $testfile" $testcopy 2>&1`
> +		rm -f $testcopy 2>&1 > /dev/null
> +		;;
>  	"falloc" )
>  		testio=`$XFS_IO_PROG -F -f -c "falloc 0 1m" $testfile 2>&1`
>  		;;

This is not able to _notrun as expect on a kernel without
copy_file_range syscall support, e.g. 4.4 kernel, xfs_io reports
"+copy_range: Function not implemented"

I think we need a new check on $testio after the case switch, e.g.

echo $testio | grep -q "not implemented" \
	&& _notrun "xfs_io $command is not implemented in kernel"

> diff --git a/tests/generic/392 b/tests/generic/392
> new file mode 100755
> index 0000000..466643a
> --- /dev/null
> +++ b/tests/generic/392
> @@ -0,0 +1,102 @@
> +#!/bin/bash
> +# FS QA Test No. 392
> +#
> +# Tests vfs_copy_file_range():
> +#   - Copy a file
> +#   - Copy beginning of original to new file
> +#   - Copy middle of original to a new file
> +#   - Copy end of original to new file
> +#   - Copy middle of original to a new file, creating a hole
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2016 Netapp, Inc. All rights reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -rf $tmp.*
> +}
> +
> +# get standard environment
> +. common/rc
> +. common/filter
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +
> +_require_xfs_io_command "copy_range"
> +_require_test
> +
> +testdir=$TEST_DIR/test-$seq
> +rm -rf $testdir
> +mkdir $testdir
> +rm -f $seqres.full
> +
> +echo "Create the original file and then copy"
> +$XFS_IO_PROG -f -c 'pwrite -S 0x61 0    1000' $testdir/file >> $seqres.full 2>&1
> +$XFS_IO_PROG -f -c 'pwrite -S 0x62 1000 1000' $testdir/file >> $seqres.full 2>&1
> +$XFS_IO_PROG -f -c 'pwrite -S 0x63 2000 1000' $testdir/file >> $seqres.full 2>&1
> +$XFS_IO_PROG -f -c 'pwrite -S 0x64 3000 1000' $testdir/file >> $seqres.full 2>&1
> +$XFS_IO_PROG -f -c 'pwrite -S 0x65 4000 1000' $testdir/file >> $seqres.full 2>&1
> +$XFS_IO_PROG -f -c "copy_range $testdir/file" "$testdir/copy"
> +cmp $testdir/file $testdir/copy
> +echo "Original md5sums:"
> +md5sum $testdir/{file,copy} | _filter_test_dir
> +
> +echo "Copy beginning of original file"
> +$XFS_IO_PROG -f -c "copy_range -l 1000 $testdir/file" "$testdir/beginning"
> +cmp -n 1000 $testdir/file $testdir/beginning
> +echo "md5sums after copying beginning:"
> +md5sum $testdir/{file,beginning} | _filter_test_dir
> +
> +echo "Copy middle of original file"
> +$XFS_IO_PROG -f -c "copy_range -s 1000 -l 3000 $testdir/file" "$testdir/middle"
> +cmp -n 3000 $testdir/file $testdir/middle 1000
> +echo "md5sums after copying middle:"
> +md5sum $testdir/{file,middle} | _filter_test_dir
> +
> +echo "Copy end of original file"
> +$XFS_IO_PROG -f -c "copy_range -s 4000 -l 1000 $testdir/file" "$testdir/end"
> +cmp -n 1000 $testdir/file $testdir/end 4000
> +echo "md5sums after copying end:"
> +md5sum $testdir/{file,end} | _filter_test_dir
> +
> +echo "Copy beyond end of original file"
> +$XFS_IO_PROG -f -c "copy_range -s 4000 -l 2000 $testdir/file" "$testdir/beyond"

This didn't return EINVAL for me on xfs, ext4 and NFS, btrfs reported
EINVAL but it failed cmp and md5sum test at many other places. What is
the expected behavior?

generic/393 and generic/396 failed in a similar way, missing
"copy_range: Invalid argument" in the test output.

And seems copy_range -l option doesn't work well with xfs reflink
enabled? I saw many EINVALs when testing reflink enabled xfs, all these
5 tests failed. Kernel bug or xfs_io bug or we just want to _notrun on
reflink xfs?

Thanks,
Eryu