public inbox for fstests@vger.kernel.org
 help / color / mirror / Atom feed
From: Ross Zwisler <ross.zwisler@linux.intel.com>
To: Xiong Zhou <xzhou@redhat.com>
Cc: fstests@vger.kernel.org, ross.zwisler@linux.intel.com,
	dan.j.williams@intel.com, jmoyer@redhat.com, eguan@redhat.com
Subject: Re: [PATCH v4 4/4] generic: mmap write readonly DAX file
Date: Tue, 18 Apr 2017 11:05:06 -0600	[thread overview]
Message-ID: <20170418170506.GD25618@linux.intel.com> (raw)
In-Reply-To: <1492413255-11146-5-git-send-email-xzhou@redhat.com>

On Mon, Apr 17, 2017 at 03:14:15PM +0800, Xiong Zhou wrote:
> Regression case that one can write to read-only
> file in a DAX mountpoint.
> 
> Signed-off-by: Xiong Zhou <xzhou@redhat.com>

Yep, this test works fine in my setup.  It fails for me, as expected, with
v4.10.0, and passes as expected with v4.10.3. I've added a few small comments
below, but with those addressed you can add:

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>

> +int
> +main(int argc, char **argv)
> +{
> +	int fd, pfd, ret;
> +	char *buf;
> +	/* gcc -O2 will optimize foo's storage, preventing
> +	 * reproduce this issue.
> +	 * foo is never actually used after fault in value stored.
> +	 */
> +	volatile char foo __attribute__((__unused__));
> +	int pagesize = getpagesize();
> +
> +	if (argc < 2) {
> +		printf("Usage: %s <file> <pmem file>\n", basename(argv[0]));
> +		exit(0);
> +	}
> +
> +	fd = open(argv[1], O_RDONLY|O_DIRECT);
> +	if (fd < 0)
> +		err_exit("open");
> +
> +	pfd = open(argv[2], O_RDONLY);
> +	if (pfd < 0)
> +		err_exit("pmem open");
> +
> +	buf = mmap(NULL, pagesize, PROT_READ, MAP_SHARED, pfd, 0);
> +	if (buf == MAP_FAILED)
> +		err_exit("mmap");
> +
> +	/*
> +	 * Read from the DAX mmap to populate the first page in the
> +	 * address_space with a read-only mapping.
> +	 */
> +	foo = *buf;
> +
> +	/*
> +	 * Now write to the DAX mmap.  This *should* fail, but if the bug is
> +	 * present in __get_user_pages_fast(), it will succeed.
> +	 */
> +	ret = read(fd, buf, pagesize);
> +	if (ret != pagesize)
> +		err_exit("read");
> +
> +	ret = msync(buf, pagesize, MS_SYNC);
> +	if (ret != 0)
> +		err_exit("msync");
> +
> +	ret = munmap(buf, pagesize);
> +	if (ret < 0)
> +		err_exit("munmap");
> +
> +	ret = close(fd);
> +	if (ret < 0)
> +		err_exit("clsoe fd");
			  close

> diff --git a/tests/generic/424 b/tests/generic/424
> new file mode 100755
> index 0000000..f73e08a
> --- /dev/null
> +++ b/tests/generic/424
> @@ -0,0 +1,92 @@
> +#! /bin/bash
> +# FS QA Test 424
> +#
> +# This is a regression test for kernel commit
> +#  ef947b2 x86, mm: fix gup_pte_range() vs DAX mappings
> +# created by Jeffrey Moyer <jmoyer@redhat.com>
> +#
> +# This is reproducible only when testing on pmem device
> +# which is configured in "memory mode", not in "raw mode".
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Red Hat.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -rf $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# Modify as appropriate.
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch_dax
> +_require_test_program "t_mmap_write_ro"
> +_require_user

Could also maybe benefit from "_require_test", which makes sure your TEST_DEV
is a block device?  I don't think you get this explicitly tested with
_test_cycle_mount?

I think you're also missing a:
	_require_pmem_key_value $SCRATCH_DEV "mode" "memory"

  reply	other threads:[~2017-04-18 17:05 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-07  7:56 [PATCH 1/3] common: helper to get value from ndctl list by key Xiong Zhou
2017-04-07  7:56 ` [PATCH 2/3] DAX-DIO: skip DAX to non-DAX if unsupported Xiong Zhou
2017-04-12  3:30   ` Ross Zwisler
2017-04-07  7:56 ` [PATCH 3/3] DAX: mmap write readonly file Xiong Zhou
2017-04-07 17:16 ` [PATCH 1/3] common: helper to get value from ndctl list by key Ross Zwisler
2017-04-10  6:05   ` [PATCH v2 " Xiong Zhou
2017-04-10  6:05     ` [PATCH v2 2/3] DAX-DIO: skip DAX to non-DAX if unsupported Xiong Zhou
2017-04-11 11:44       ` Eryu Guan
2017-04-11 13:54         ` Jeff Moyer
2017-04-11 14:26         ` Xiong Zhou
2017-04-10  6:05     ` [PATCH v2 3/3] DAX: mmap write readonly file Xiong Zhou
2017-04-11 11:46       ` Eryu Guan
2017-04-11 13:56         ` Jeff Moyer
2017-04-11 18:52           ` Ross Zwisler
2017-04-11 22:45             ` Ross Zwisler
2017-04-12  2:52               ` Xiong Zhou
2017-04-12  4:03       ` Ross Zwisler
2017-04-12  6:26         ` Xiong Zhou
2017-04-12 14:46           ` [PATCH v3 0/4] split DAX mmap DIO cases Xiong Zhou
2017-04-12 14:46             ` [PATCH v3 1/4] DAX-DIO: make dax_to_non_dax dio test solo Xiong Zhou
2017-04-12 14:46             ` [PATCH v3 2/4] generic: test mmap io fom DAX to non-DAX Xiong Zhou
2017-04-13  4:11               ` Xiong Zhou
2017-04-13 13:36                 ` Dan Williams
2017-04-14 10:01                   ` Xiong Zhou
2017-04-14 14:49                     ` Dan Williams
2017-04-14 15:22                       ` Ross Zwisler
2017-04-14 15:33                         ` Dan Williams
2017-04-14 15:51                           ` Ross Zwisler
2017-04-12 14:46             ` [PATCH v3 3/4] xfs: test per-inode DAX flag " Xiong Zhou
2017-04-12 14:46             ` [PATCH v3 4/4] generic: mmap write readonly DAX file Xiong Zhou
2017-04-17  7:14             ` [PATCH v4 0/4] split DAX mmap DIO cases Xiong Zhou
2017-04-17  7:14               ` [PATCH v4 1/4] DAX-DIO: make dax_to_non_dax dio test solo Xiong Zhou
2017-04-18 16:31                 ` Ross Zwisler
2017-04-17  7:14               ` [PATCH v4 2/4] generic: test mmap io fom DAX to non-DAX Xiong Zhou
2017-04-17 14:14                 ` Dan Williams
2017-04-17 22:54                   ` Dan Williams
2017-04-17 23:39                     ` Ross Zwisler
2017-04-17 23:47                       ` Dan Williams
2017-04-19  8:40                   ` Xiong Zhou
2017-04-19 15:53                     ` Dan Williams
2017-04-18 10:12                 ` Christoph Hellwig
2017-04-18 14:49                   ` Xiong Zhou
2017-07-28 14:55                   ` Jeff Moyer
2017-04-18 16:32                 ` Ross Zwisler
2017-04-17  7:14               ` [PATCH v4 3/4] xfs: test per-inode DAX flag " Xiong Zhou
2017-04-18 16:36                 ` Ross Zwisler
2017-04-17  7:14               ` [PATCH v4 4/4] generic: mmap write readonly DAX file Xiong Zhou
2017-04-18 17:05                 ` Ross Zwisler [this message]
2017-04-19  2:54                   ` Xiong Zhou
2017-04-24 16:34                 ` Ross Zwisler
2017-09-25  8:40               ` [PATCH v5 0/3] fix dax to nondax dio fake failures Xiong Zhou
2017-09-25  8:40                 ` [PATCH v5 1/3] generic: mmap write readonly DAX file Xiong Zhou
2017-09-27  9:57                   ` Eryu Guan
2017-09-25  8:40                 ` [PATCH v5 2/3] generic/413: skip dax to nondax dio test if needed Xiong Zhou
2017-09-27  9:50                   ` Eryu Guan
2017-09-27 15:01                     ` Jeff Moyer
2017-09-25  8:40                 ` [PATCH v5 3/3] xfs/260: remove per-inode DAX flag test Xiong Zhou
2017-09-25 16:59                   ` Ross Zwisler
2017-09-26  0:51                     ` Xiong Zhou
2017-09-28  7:41                 ` [PATCH v6 0/4] fix dax to nondax dio fake failures Xiong Zhou
2017-09-28  7:41                   ` [PATCH v6 1/4] tests: add new group dax Xiong Zhou
2017-09-28  7:41                   ` [PATCH v6 2/4] gitignore: sort src/ binaries name Xiong Zhou
2017-09-28 11:10                     ` Dave Chinner
2017-09-28 12:28                       ` Xiong Zhou
2017-09-28 21:43                         ` Dave Chinner
2017-09-28  7:41                   ` [PATCH v6 3/4] generic: mmap write readonly DAX file Xiong Zhou
2017-09-28  7:41                   ` [PATCH v6 4/4] generic/413: skip dax to nondax dio test if needed Xiong Zhou
2017-09-29  2:16                   ` [PATCH v7] " Xiong Zhou
2017-09-29 16:24                     ` Ross Zwisler
2017-09-30  2:30                       ` Xiong Zhou
2017-04-11 11:40     ` [PATCH v2 1/3] common: helper to get value from ndctl list by key Eryu Guan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170418170506.GD25618@linux.intel.com \
    --to=ross.zwisler@linux.intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=eguan@redhat.com \
    --cc=fstests@vger.kernel.org \
    --cc=jmoyer@redhat.com \
    --cc=xzhou@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox