From: Zorro Lang <zlang@redhat.com>
To: "Darrick J. Wong" <djwong@kernel.org>
Cc: fstests@vger.kernel.org, riteshh@linux.ibm.com
Subject: Re: [PATCH v2] generic: test small swapfile without page-aligned contiguous blocks
Date: Thu, 17 Jun 2021 10:27:32 +0800 [thread overview]
Message-ID: <20210617022732.GK2978781@localhost.localdomain> (raw)
In-Reply-To: <20210617001748.GA158186@locust>
On Wed, Jun 16, 2021 at 05:17:48PM -0700, Darrick J. Wong wrote:
> On Wed, Jun 16, 2021 at 12:11:28AM +0800, Zorro Lang wrote:
> > If a swapfile doesn't contain even a single page-aligned contiguous
> > range of blocks, it's an invalid swapfile, and might cause kernel
> > issue. This case covered commit 5808fecc5723 ("iomap: Fix negative
> > assignment to unsigned sis->pages in iomap_swapfile_activate").
> >
> > Signed-off-by: Zorro Lang <zlang@redhat.com>
> > ---
> >
> > Hi,
> >
> > Sorry for the late V2, I just back from a longtime sick leave. V2 accord
>
> :( I hope you're doing better!
Thanks, feel better now, trying to catch what I missed :)
>
> > to the review points from djwong:
> > https://lore.kernel.org/fstests/20210525160907.GB202095@locust/
> > But I didn't change the _scratch_mkfs_blocksized() helper in this patch.
> >
> > CC Ritesh Harjani who's the original author of commit 5808fecc5723, and
> > looks like he sent another test case.
> >
> > Thanks,
> > Zorro
> >
> > tests/generic/639 | 82 +++++++++++++++++++++++++++++++++++++++++++
> > tests/generic/639.out | 2 ++
> > tests/generic/group | 1 +
> > 3 files changed, 85 insertions(+)
> > create mode 100755 tests/generic/639
> > create mode 100644 tests/generic/639.out
> >
> > diff --git a/tests/generic/639 b/tests/generic/639
> > new file mode 100755
> > index 00000000..b371a6e9
> > --- /dev/null
> > +++ b/tests/generic/639
> > @@ -0,0 +1,82 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2021 Red Hat Inc. All Rights Reserved.
> > +#
> > +# FS QA Test No. 639
> > +#
> > +# Test small swapfile which doesn't contain even a single page-aligned contiguous
> > +# range of blocks. This case covered commit 5808fecc5723 ("iomap: Fix negative
> > +# assignment to unsigned sis->pages in iomap_swapfile_activate").
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +_supported_fs generic
> > +_require_scratch
> > +_require_scratch_swapfile
> > +_require_test_program mkswap
> > +_require_test_program swapon
> > +
> > +make_unaligned_swapfile()
> > +{
> > + local fname=$1
> > + local n=$((psize / bsize - 1))
> > +
> > + # Make sure the swapfile doesn't contain even a single page-aligned
> > + # contiguous range of blocks. This's necessary to cover the bug
> > + $XFS_IO_PROG -f -t -c "pwrite 0 $(((psize + bsize) * n))" $fname >> $seqres.full 2>&1
> > + for((i=1; i<=n; i++));do
> > + $XFS_IO_PROG -c "fcollapse $(((psize - bsize) * i)) $bsize" $fname
> > + done
>
> _require_xfs_io_command fcollapse
Sure,
>
> is needed above.
>
> > + chmod 0600 $fname
> > + $CHATTR_PROG +C $fname > /dev/null 2>&1
> > + $here/src/mkswap $fname
> > +}
> > +
> > +_scratch_mkfs >> $seqres.full 2>&1
> > +_scratch_mount
> > +psize=`get_page_size`
> > +bsize=`_get_file_block_size $SCRATCH_MNT`
> > +# Due to we need page-unaligned blocks, so blocksize < pagesize is necessary.
> > +# If not, try to make a smaller enough block size
> > +if [ $bsize -ge $psize ];then
> > + _scratch_unmount
> > + _scratch_mkfs_blocksized 1024 >> $seqres.full 2>&1
> > + if [ $? -ne 0 ];then
> > + _notrun "Can't make filesystem block size < page size"
> > + fi
> > + _scratch_mount
> > + bsize=`_get_file_block_size $SCRATCH_MNT`
> > + if [ $bsize -ne 1024 ];then
> > + _notrun "1024 block size is necessary"
>
> This error message probably should have a little more context.
>
> _notrun "Could not force 1024-byte file block size."
Sure. If I don't need to wait your patchset (about new grouplist), I'll change
this case now.
Thanks,
Zorro
>
> The logic in the test looks good to me now.
>
> --D
>
> > + fi
> > +fi
> > +swapfile=$SCRATCH_MNT/$seq.swapfile
> > +make_unaligned_swapfile $swapfile
> > +$here/src/swapon $swapfile
> > +swapoff $swapfile
> > +
> > +echo "Silence is golden"
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/generic/639.out b/tests/generic/639.out
> > new file mode 100644
> > index 00000000..62c66537
> > --- /dev/null
> > +++ b/tests/generic/639.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 639
> > +Silence is golden
> > diff --git a/tests/generic/group b/tests/generic/group
> > index 9a636b23..48ffa3c7 100644
> > --- a/tests/generic/group
> > +++ b/tests/generic/group
> > @@ -641,3 +641,4 @@
> > 636 auto quick swap
> > 637 auto quick dir
> > 638 auto quick rw
> > +639 auto quick swap
> > --
> > 2.31.1
> >
>
next prev parent reply other threads:[~2021-06-17 2:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 16:11 [PATCH v2] generic: test small swapfile without page-aligned contiguous blocks Zorro Lang
2021-06-17 0:17 ` Darrick J. Wong
2021-06-17 2:27 ` Zorro Lang [this message]
2021-06-17 3:06 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210617022732.GK2978781@localhost.localdomain \
--to=zlang@redhat.com \
--cc=djwong@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=riteshh@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox