[PATCH] btrfs: add test case to verify the behavior with large RAID0 data chunks

[Qu Wenruo <wqu@suse.com>]

There is a recent regression during v6.4 merge window, that a u32 left
shift overflow can cause problems with large data chunks (over 4G
sized).

This is the regression test case for it.

The test case itself would:

- Create a RAID0 chunk with a single 6G data chunk
  This requires at least 6 devices from SCRATCH_DEV_POOL, and each
  should be larger than 2G.

- Fill the fs with 5G data

- Make sure everything is fine
  Including the data csums.

- Delete half of the data

- Do a fstrim
  This would lead to out-of-boundary trim if the kernel is not patched.

- Make sure everything is fine again
  If not patched, we may have corrupted data due to the bad fstrim
  above.

For now, this test case only checks the behavior for RAID0.
As for RAID10, we need 12 devices, which is out-of-reach for a lot of
test envionrments.

For RAID56, they would have a different test case, as they don't support
discard inside the RAID56 chunks.

Signed-off-by: Qu Wenruo <wqu@suse.com>
---
 tests/btrfs/292     | 83 +++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/292.out |  2 ++
 2 files changed, 85 insertions(+)
 create mode 100755 tests/btrfs/292
 create mode 100644 tests/btrfs/292.out

diff --git a/tests/btrfs/292 b/tests/btrfs/292
new file mode 100755
index 00000000..d1e31603
--- /dev/null
+++ b/tests/btrfs/292
@@ -0,0 +1,83 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2023 SUSE Linux Products GmbH. All Rights Reserved.
+#
+# FS QA Test 292
+#
+# Test btrfs behavior with large chunks (size beyond 4G) for basic read-write
+# and discard.
+# This test focus on RAID0.
+#
+. ./common/preamble
+_begin_fstest auto raid volume trim
+
+. ./common/filter
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_require_scratch_dev_pool 6
+_fixed_by_kernel_commit xxxxxxxxxxxx \
+	"btrfs: fix u32 overflows when left shifting @stripe_nr"
+
+_scratch_dev_pool_get 6
+
+
+datasize=$((5 * 1024 * 1024 * 1024))
+filesize=$((8 * 1024 * 1024))
+nr_files=$(($datasize / $filesize))
+
+# Make sure each device has at least 2G.
+# Btrfs has a limits on per-device stripe length of 1G.
+# Double that so that we can ensure a data chunk with 6G size.
+
+for i in $SCRATCH_DEV_POOL; do
+	devsize=$(blockdev --getsize64 "$i")
+	if [ $devsize -lt $((2 * 1024 * 1024 * 1024)) ]; then
+		_notrun "device $i is too small, need at least 2G"
+	fi
+done
+
+_scratch_pool_mkfs -m raid1 -d raid0 >> $seqres.full 2>&1
+_scratch_mount
+
+# Fill the data chunk with 5G data.
+for (( i = 0; i < $nr_files; i++ )); do
+	xfs_io -f -c "pwrite -i /dev/urandom 0 $filesize" $SCRATCH_MNT/file_$i > /dev/null
+done
+sync
+echo "=== With initial 5G data written ===" >> $seqres.full
+$BTRFS_UTIL_PROG filesystem df $SCRATCH_MNT >> $seqres.full
+
+_scratch_unmount
+
+# Make sure we haven't corrupted anything.
+$BTRFS_UTIL_PROG check --check-data-csum $SCRATCH_DEV >> $seqres.full 2>&1
+if [ $? -ne 0 ]; then
+	_fail "data corruption detected after initial data filling"
+fi
+
+_scratch_mount
+# Delete half of the data, and do discard
+rm -rf - "$SCRATCH_MNT/*[02468]"
+sync
+$FSTRIM_PROG $SCRATCH_MNT
+
+echo "=== With 2.5G data trimmed ===" >> $seqres.full
+$BTRFS_UTIL_PROG filesystem df $SCRATCH_MNT >> $seqres.full
+_scratch_unmount
+
+# Make sure fstrim didn't corrupte anything.
+$BTRFS_UTIL_PROG check --check-data-csum $SCRATCH_DEV >> $seqres.full 2>&1
+if [ $? -ne 0 ]; then
+	_fail "data corruption detected after initial data filling"
+fi
+
+_scratch_dev_pool_put
+
+echo "Silence is golden"
+
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/292.out b/tests/btrfs/292.out
new file mode 100644
index 00000000..627309d3
--- /dev/null
+++ b/tests/btrfs/292.out
@@ -0,0 +1,2 @@
+QA output created by 292
+Silence is golden
-- 
2.39.0