From: Dave Chinner <david@fromorbit.com>
To: fstests@vger.kernel.org
Cc: zlang@kernel.org
Subject: [PATCH 24/28] open-by-handle.c: use syncfs() rather than sync()
Date: Thu, 17 Apr 2025 13:01:05 +1000 [thread overview]
Message-ID: <20250417031208.1852171-25-david@fromorbit.com> (raw)
In-Reply-To: <20250417031208.1852171-1-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
xfs/183 runs bulkstat_unlink_test to create 100 inodes, unlink on
and bulkstat them. It takes a ridiculously long time to run under
check-parallel because it runs sync() multiple times per iteration:
Ten slowest tests - runtime in seconds:
.....
xfs/183 328
When running check-parallel, sync() can take a -long- time to
run as there can be dozens of filesystems that need to be synced,
not to mention sync getting hung up behind all the mount and
unmounts that are also being run.
Convert the sync() calls to syncfs() so that they only try to sync
the filesystem under test and not the entire system. This avoids
interactions and delays with other tests and mount/unmount
operations, hence allowing both the test and the overall
check-parallel operation to run faster:
xfs/183 4s
Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
src/bulkstat_unlink_test.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/src/bulkstat_unlink_test.c b/src/bulkstat_unlink_test.c
index d78cc2ac2..62e5bb978 100644
--- a/src/bulkstat_unlink_test.c
+++ b/src/bulkstat_unlink_test.c
@@ -88,7 +88,7 @@ main(int argc, char *argv[])
}
if (chknb) { /* Get the original number of inodes (lazy) */
- sync();
+ syncfs(fd[nfiles]);
if (xfsctl(dirname, fd[nfiles], XFS_IOC_FSBULKSTAT, &a) != 0) {
printf("Warning (%s:%d), xfsctl(XFS_IOC_FSBULKSTAT) FAILED.\n", __FILE__, __LINE__);
}
@@ -118,7 +118,7 @@ main(int argc, char *argv[])
*The files are still opened (but unlink()ed) ,
* we should have more inodes than before
*/
- sync();
+ syncfs(fd[nfiles]);
last_inode = 0;
if (xfsctl(dirname, fd[nfiles], XFS_IOC_FSBULKSTAT, &a) != 0) {
printf("Warning (%s:%d), xfsctl(XFS_IOC_FSBULKSTAT) FAILED.\n", __FILE__, __LINE__);
@@ -139,7 +139,7 @@ main(int argc, char *argv[])
* The files are now closed, we should be back to our,
* previous inode count
*/
- sync();
+ syncfs(fd[nfiles]);
last_inode = 0;
if (xfsctl(dirname, fd[nfiles], XFS_IOC_FSBULKSTAT, &a) != 0) {
printf("Warning (%s:%d), xfsctl(XFS_IOC_FSBULKSTAT) FAILED.\n", __FILE__, __LINE__);
@@ -150,7 +150,7 @@ main(int argc, char *argv[])
}
}
- sync();
+ syncfs(fd[nfiles]);
last_inode = 0;
for (;;) {
if ((e = xfsctl(dirname, fd[nfiles], XFS_IOC_FSBULKSTAT, &a)) < 0) {
@@ -173,11 +173,11 @@ main(int argc, char *argv[])
}
}
- close(fd[nfiles]);
sprintf(fname, "rm -rf %s\n", dirname);
system(fname);
- sync();
+ syncfs(fd[nfiles]);
+ close(fd[nfiles]);
sleep(2);
printf("passed\n");
}
--
2.45.2
next prev parent reply other threads:[~2025-04-17 3:29 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-17 3:00 [PATCH 00/28] check-parallel: Running tests without check Dave Chinner
2025-04-17 3:00 ` [PATCH 01/28] fstests: remove support for non-numeric test names Dave Chinner
2025-04-30 9:17 ` Nirjhar Roy (IBM)
2025-05-21 2:39 ` Dave Chinner
2025-05-26 5:14 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 02/28] _scratch_mkfs_sized: obey USE_EXTERNAL for XFS filesystems Dave Chinner
2025-05-05 6:14 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 03/28] fstests: move test exit functions to common/exit Dave Chinner
2025-04-17 3:00 ` [PATCH 04/28] check-parallel: report how many tests were _notrun Dave Chinner
2025-05-05 9:58 ` Nirjhar Roy (IBM)
2025-05-21 2:53 ` Dave Chinner
2025-05-26 6:09 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 05/28] check: factor out test list building code Dave Chinner
2025-05-06 11:32 ` Nirjhar Roy (IBM)
2025-05-21 3:55 ` Dave Chinner
2025-05-26 6:48 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 06/28] check-parallel: use common group list parsing code Dave Chinner
2025-05-06 15:56 ` Nirjhar Roy (IBM)
2025-05-21 4:13 ` Dave Chinner
2025-05-26 6:58 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 07/28] check-parallel: adjust concurrency according to CPU count Dave Chinner
2025-05-07 6:45 ` Nirjhar Roy (IBM)
2025-05-21 4:32 ` Dave Chinner
2025-05-26 8:50 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 08/28] check-parallel: add logwrite device support Dave Chinner
2025-05-07 8:18 ` Nirjhar Roy (IBM)
2025-05-21 10:07 ` Dave Chinner
2025-05-26 8:59 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 09/28] check-parallel: allow FSTYP selection from the CLI Dave Chinner
2025-05-07 8:49 ` Nirjhar Roy (IBM)
2025-05-21 10:17 ` Dave Chinner
2025-05-26 9:00 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 10/28] check-parallel: use PID namespaces for runner process isolation Dave Chinner
2025-05-07 9:02 ` Nirjhar Roy (IBM)
2025-05-21 10:19 ` Dave Chinner
2025-05-26 9:04 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 11/28] check-parallel: initial support for specifying device sizes Dave Chinner
2025-05-07 10:05 ` Nirjhar Roy (IBM)
2025-05-21 11:11 ` Dave Chinner
2025-04-17 3:00 ` [PATCH 12/28] config: move config section code to it's own file Dave Chinner
2025-05-09 6:09 ` Nirjhar Roy
2025-05-21 11:28 ` Dave Chinner
2025-04-17 3:00 ` [PATCH 13/28] check-parallel: introduce config file support Dave Chinner
2025-05-09 12:01 ` Nirjhar Roy
2025-05-21 12:23 ` Dave Chinner
2025-04-17 3:00 ` [PATCH 14/28] fstests: further separate sourcing common/rc and common/config from initialisation Dave Chinner
2025-05-10 14:08 ` Nirjhar Roy (IBM)
2025-04-17 3:00 ` [PATCH 15/28] check-parallel: de-batch test execution Dave Chinner
2025-05-09 13:16 ` Nirjhar Roy
2025-04-17 3:00 ` [PATCH 16/28] check-parallel: run sections directly Dave Chinner
2025-05-09 14:03 ` Nirjhar Roy
2025-04-17 3:00 ` [PATCH 17/28] check-parallel: rebuild test list when FSTYP changes Dave Chinner
2025-05-09 16:00 ` Nirjhar Roy
2025-04-17 3:00 ` [PATCH 18/28] check-parallel: create a "results-latest" symlink Dave Chinner
2025-05-10 13:12 ` Nirjhar Roy (IBM)
2025-04-17 3:01 ` [PATCH 19/28] check: factor test running Dave Chinner
2025-05-12 13:57 ` Nirjhar Roy (IBM)
2025-04-17 3:01 ` [PATCH 20/28] [RFC] check-parallel: run tests directly without using check Dave Chinner
2025-05-13 14:48 ` Nirjhar Roy (IBM)
2025-04-17 3:01 ` [PATCH 21/28] generic/531: limit max files per CPU Dave Chinner
2025-05-10 13:15 ` Nirjhar Roy (IBM)
2025-04-17 3:01 ` [PATCH 22/28] fsync-tester.c: use syncfs() rather than sync() Dave Chinner
2025-04-30 9:08 ` Nirjhar Roy (IBM)
2025-04-17 3:01 ` [PATCH 23/28] open-by-handle.c: " Dave Chinner
2025-04-30 9:02 ` Nirjhar Roy (IBM)
2025-05-21 2:32 ` Dave Chinner
2025-05-26 5:11 ` Nirjhar Roy (IBM)
2025-04-17 3:01 ` Dave Chinner [this message]
2025-04-30 8:56 ` [PATCH 24/28] " Nirjhar Roy (IBM)
2025-05-21 2:30 ` Dave Chinner
2025-05-26 4:56 ` Nirjhar Roy (IBM)
2025-04-17 3:01 ` [PATCH 25/28] bulkstat_unlink_test_modified.c: remove unused test code Dave Chinner
2025-04-30 8:47 ` Nirjhar Roy (IBM)
2025-04-17 3:01 ` [PATCH 26/28] stale-handle.c: use syncfs() rather than sync() Dave Chinner
2025-04-30 8:34 ` Nirjhar Roy (IBM)
2025-05-21 2:24 ` Dave Chinner
2025-04-17 3:01 ` [PATCH 27/28] scaleread: remove dead test code Dave Chinner
2025-04-30 8:10 ` Nirjhar Roy (IBM)
2025-04-17 3:01 ` [PATCH 28/28] xfs/259: no need to call sync Dave Chinner
2025-04-30 7:56 ` Nirjhar Roy (IBM)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250417031208.1852171-25-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=fstests@vger.kernel.org \
--cc=zlang@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox