public inbox for fstests@vger.kernel.org
 help / color / mirror / Atom feed
From: Eric Sandeen <sandeen@sandeen.net>
To: Zorro Lang <zlang@redhat.com>, fstests@vger.kernel.org
Cc: eguan@redhat.com, sandeen@redhat.com
Subject: Re: [PATCH 1/2] xfs/133: test project quota name beginning with digits
Date: Thu, 10 Dec 2015 11:47:31 -0600	[thread overview]
Message-ID: <5669BAB3.7040507@sandeen.net> (raw)
In-Reply-To: <1449681026-4469-1-git-send-email-zlang@redhat.com>



On 12/9/15 11:10 AM, Zorro Lang wrote:
> There's a known bug of xfsprogs, when a project name beinning with
> digits, it can't be found by run xfs_quota 'quota -p -v ...' command.
> 
> Signed-off-by: Zorro Lang <zlang@redhat.com>

Looks fine to me; however I get a failure that I didn't expect:

Query project=123456-project Failed
_check_xfs_filesystem: filesystem on /dev/sdb2 is inconsistent
...
disconnected inode 132, would move to lost+found
Phase 7 - verify link counts...

Is that failure expected?

> ---
>  tests/xfs/133     | 101 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/xfs/133.out |   1 +
>  tests/xfs/group   |   1 +
>  3 files changed, 103 insertions(+)
>  create mode 100755 tests/xfs/133
>  create mode 100644 tests/xfs/133.out
> 
> diff --git a/tests/xfs/133 b/tests/xfs/133
> new file mode 100755
> index 0000000..330221f
> --- /dev/null
> +++ b/tests/xfs/133
> @@ -0,0 +1,101 @@
> +#! /bin/bash
> +# FS QA Test 133
> +#
> +# Test xfs_quota when project names beginning with digits.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2015 Red Hat Inc.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +qa_user=""
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/quota
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs xfs
> +_supported_os Linux
> +_require_scratch
> +_require_xfs_quota
> +
> +_scratch_mkfs_xfs >/dev/null 2>&1
> +
> +do_project_test()
> +{
> +	local qa_project=123456-project
> +	local dir=$SCRATCH_MNT/project
> +
> +	mkdir $dir 2>/dev/null
> +
> +	#project quota files
> +	cat >$tmp.projects <<EOF
> +10:$dir
> +EOF
> +
> +	cat >$tmp.projid <<EOF
> +$qa_project:10
> +EOF
> +
> +	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> +		-c "project -s $qa_project" $SCRATCH_MNT >>$seqres.full 2>&1
> +	[ $? -ne 0 ] && _fail "Initalize project=$qa_project Failed"
> +
> +	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> +		-c "limit -p bsoft=100m bhard=200m $qa_project" $SCRATCH_MNT >>$seqres.full 2>&1
> +	[ $? -ne 0 ] && _fail "Create limit for project=$qa_project Failed"
> +
> +	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> +		-c "quota -p -v $qa_project" $SCRATCH_MNT 2>>$seqres.full | grep -qw $qa_project
> +	[ $? -ne 0 ] && _fail "Query project=$qa_project Failed"
> +
> +	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> +		-c "report -p" $SCRATCH_MNT 2>>$seqres.full | grep -qw $qa_project
> +	[ $? -ne 0 ] && _fail "Report project=$qa_project Failed"
> +
> +	return 0
> +}
> +
> +# Test project
> +_qmount_option "uquota,pquota"
> +_qmount
> +_require_prjquota $SCRATCH_DEV
> +do_project_test
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/133.out b/tests/xfs/133.out
> new file mode 100644
> index 0000000..189cb69
> --- /dev/null
> +++ b/tests/xfs/133.out
> @@ -0,0 +1 @@
> +QA output created by 133
> diff --git a/tests/xfs/group b/tests/xfs/group
> index 9884329..bae09de 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -130,6 +130,7 @@
>  130 fuzzers
>  131 auto quick clone
>  132 auto quick clone
> +133 auto quick quota
>  134 quota auto quick
>  136 attr2
>  142 dmapi
> 

  parent reply	other threads:[~2015-12-10 17:47 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09 17:10 [PATCH 1/2] xfs/133: test project quota name beginning with digits Zorro Lang
2015-12-09 17:10 ` [PATCH 2/2] xfs/135: test user and group quota names " Zorro Lang
2015-12-10 17:47   ` Eric Sandeen
2015-12-10 17:47 ` Eric Sandeen [this message]
2015-12-11  1:57   ` [PATCH 1/2] xfs/133: test project quota name " Zirong Lang
2015-12-11  2:44 ` Eric Sandeen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5669BAB3.7040507@sandeen.net \
    --to=sandeen@sandeen.net \
    --cc=eguan@redhat.com \
    --cc=fstests@vger.kernel.org \
    --cc=sandeen@redhat.com \
    --cc=zlang@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox