fstests.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "xuyang2018.jy@fujitsu.com" <xuyang2018.jy@fujitsu.com>
To: "Darrick J. Wong" <djwong@kernel.org>
Cc: "guaneryu@gmail.com" <guaneryu@gmail.com>,
	"linux-xfs@vger.kernel.org" <linux-xfs@vger.kernel.org>,
	"fstests@vger.kernel.org" <fstests@vger.kernel.org>,
	"guan@eryu.me" <guan@eryu.me>
Subject: Re: [PATCH 3/8] xfs/220: fix quotarm syscall test
Date: Fri, 14 Jan 2022 03:23:50 +0000	[thread overview]
Message-ID: <61E0ECFE.9080300@fujitsu.com> (raw)
In-Reply-To: <61DE2BAF.3000001@fujitsu.com>

on 2022/1/12 9:14, xuyang2018.jy@fujitsu.com wrote:
> on 2022/1/12 5:50, Darrick J. Wong wrote:
>> From: Darrick J. Wong<djwong@kernel.org>
>>
>> In commit 6ba125c9, we tried to adjust this fstest to deal with the
>> removal of the ability to turn off quota accounting via the Q_XQUOTAOFF
>> system call.
>>
>> Unfortunately, the changes made to this test make it nonfunctional on
>> those newer kernels, since the Q_XQUOTARM command returns EINVAL if
>> quota accounting is turned on, and the changes filter out the EINVAL
>> error string.
>>
>> Doing this wasn't /incorrect/, because, very narrowly speaking, the
>> intent of this test is to guard against Q_XQUOTARM returning ENOSYS when
>> quota has been enabled.  However, this also means that we no longer test
>> Q_XQUOTARM's ability to truncate the quota files at all.
>>
>> So, fix this test to deal with the loss of quotaoff in the same way that
>> the others do -- if accounting is still enabled after the 'off' command,
>> cycle the mount so that Q_XQUOTARM actually truncates the files.
>>
>> While we're at it, enhance the test to check that XQUOTARM actually
>> truncated the quota files.
> Looks good to me,
> Reviewed-by:Yang Xu<xuyang2018.jy@fujitsu.com>
>
> Best Regards
> Yang Xu
>
>>
>> Fixes: 6ba125c9 ("xfs/220: avoid failure when disabling quota accounting is not supported")
>> Cc: xuyang2018.jy@fujitsu.com
>> Signed-off-by: Darrick J. Wong<djwong@kernel.org>
>> ---
>>    tests/xfs/220 |   30 +++++++++++++++++++++++-------
>>    1 file changed, 23 insertions(+), 7 deletions(-)
>>
>>
>> diff --git a/tests/xfs/220 b/tests/xfs/220
>> index 241a7abd..88eedf51 100755
>> --- a/tests/xfs/220
>> +++ b/tests/xfs/220
>> @@ -52,14 +52,30 @@ _scratch_mkfs_xfs>/dev/null 2>&1
>>    # mount  with quotas enabled
>>    _scratch_mount -o uquota
>>
>> -# turn off quota and remove space allocated to the quota files
>> +# turn off quota accounting...
>> +$XFS_QUOTA_PROG -x -c off $SCRATCH_DEV
>> +
>> +# ...but if the kernel doesn't support turning off accounting, remount with
>> +# noquota option to turn it off...
I used MS_REMOUNT flag with mount syscall in ltp quotactl07.c, so this 
is the expected behaviour?

https://patchwork.ozlabs.org/project/ltp/patch/1641973691-22981-2-git-send-email-xuyang2018.jy@fujitsu.com/

Best Regards
Yang Xu
>> +if $XFS_QUOTA_PROG -x -c 'state -u' $SCRATCH_DEV | grep -q 'Accounting: ON'; then
>> +	_scratch_unmount
>> +	_scratch_mount -o noquota
>> +fi
>> +
>> +before_freesp=$(_get_available_space $SCRATCH_MNT)
>> +
>> +# ...and remove space allocated to the quota files
>>    # (this used to give wrong ENOSYS returns in 2.6.31)
>> -#
>> -# The sed expression below replaces a notrun to cater for kernels that have
>> -# removed the ability to disable quota accounting at runtime.  On those
>> -# kernel this test is rather useless, and in a few years we can drop it.
>> -$XFS_QUOTA_PROG -x -c off -c remove $SCRATCH_DEV 2>&1 | \
>> -	sed -e '/XFS_QUOTARM: Invalid argument/d'
>> +$XFS_QUOTA_PROG -x -c remove $SCRATCH_DEV
>> +
>> +# Make sure we actually freed the space used by dquot 0
>> +after_freesp=$(_get_available_space $SCRATCH_MNT)
>> +delta=$((after_freesp - before_freesp))
>> +
>> +echo "freesp $before_freesp ->   $after_freesp ($delta)">>   $seqres.full
>> +if [ $before_freesp -ge $after_freesp ]; then
>> +	echo "expected Q_XQUOTARM to free space"
>> +fi
>>
>>    # and unmount again
>>    _scratch_unmount
>>

  reply	other threads:[~2022-01-14  3:23 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-11 21:50 [PATCHSET 0/8] fstests: random fixes Darrick J. Wong
2022-01-11 21:50 ` [PATCH 1/8] common/rc: fix _check_xfs_scrub_does_unicode on newer versions of libc-bin Darrick J. Wong
2022-01-11 21:50 ` [PATCH 2/8] common/rc: fix unicode checker detection in xfs_scrub Darrick J. Wong
2022-01-11 21:50 ` [PATCH 3/8] xfs/220: fix quotarm syscall test Darrick J. Wong
2022-01-12  1:14   ` xuyang2018.jy
2022-01-14  3:23     ` xuyang2018.jy [this message]
2022-01-14 17:08       ` Darrick J. Wong
2022-01-17  1:06         ` xuyang2018.jy
2022-01-11 21:50 ` [PATCH 4/8] xfs: test fixes for new 5.17 behaviors Darrick J. Wong
2022-01-11 21:50 ` [PATCH 5/8] xfs: regression test for allocsp handing out stale disk contents Darrick J. Wong
2022-01-16  7:12   ` Eryu Guan
2022-01-18  3:37   ` Zorro Lang
2022-01-18 18:09     ` Darrick J. Wong
2022-01-19  4:07       ` Zorro Lang
2022-01-19  4:52         ` Darrick J. Wong
2022-01-11 21:50 ` [PATCH 6/8] fsx: add support for XFS_IOC_ALLOCSP Darrick J. Wong
2022-01-11 21:50 ` [PATCH 7/8] iogen: upgrade to fallocate Darrick J. Wong
2022-01-16  7:01   ` Eryu Guan
2022-01-17 17:15     ` Darrick J. Wong
2022-01-11 21:50 ` [PATCH 8/8] alloc: " Darrick J. Wong
2022-01-16  7:16 ` [PATCHSET 0/8] fstests: random fixes Eryu Guan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=61E0ECFE.9080300@fujitsu.com \
    --to=xuyang2018.jy@fujitsu.com \
    --cc=djwong@kernel.org \
    --cc=fstests@vger.kernel.org \
    --cc=guan@eryu.me \
    --cc=guaneryu@gmail.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).