From: Harvey Harrison <harvey.harrison@gmail.com>
To: Jon Smirl <jonsmirl@gmail.com>
Cc: Jakub Narebski <jnareb@gmail.com>, Jan Holesovsky <kendy@suse.cz>,
git@vger.kernel.org, gitster@pobox.com
Subject: Re: [PATCH] RFC: git lazy clone proof-of-concept
Date: Fri, 08 Feb 2008 12:19:39 -0800 [thread overview]
Message-ID: <1202502007.12966.30.camel@brick> (raw)
In-Reply-To: <9e4733910802081126r5bf19c95rec817a1b6648ee4d@mail.gmail.com>
On Fri, 2008-02-08 at 14:26 -0500, Jon Smirl wrote:
> On 2/8/08, Jakub Narebski <jnareb@gmail.com> wrote:
> > Jan Holesovsky <kendy@suse.cz> writes:
> > One of the reasons why 'lazy clone' was not implemented was the fact
> > that by using large enough window, and larger than default delta
> > length you can repack "archive pack" (and keep it from trying to
> > repack using .keep files, see git-config(1)) much tighter than with
> > default (time and CPU conserving) options, and much, much tighter than
> > pack which is result of fast-import driven import.
> >
> > Both Mozilla import, and GCC import were packed below 0.5 GB. Warning:
> > you would need machine with large amount of memory to repack it
> > tightly in sensible time!
>
> A lot of memory is 2-4GB. Without this much memory you will trigger
> swapping and the pack process will finish in about a month.
Well, my modest little Celeron M laptop w/ 1GB of ram did the full
repack overnight on the gcc repo, so a month is a bit of an
exaggeration.
Cheers,
Harvey
next prev parent reply other threads:[~2008-02-08 20:20 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-08 17:28 [PATCH] RFC: git lazy clone proof-of-concept Jan Holesovsky
2008-02-08 18:03 ` Nicolas Pitre
2008-02-09 14:25 ` Jan Holesovsky
2008-02-09 22:05 ` Mike Hommey
2008-02-09 23:38 ` Nicolas Pitre
2008-02-10 7:23 ` Marco Costalba
2008-02-10 12:08 ` Johannes Schindelin
2008-02-10 16:46 ` David Symonds
2008-02-10 17:45 ` Johannes Schindelin
2008-02-10 19:45 ` Nicolas Pitre
2008-02-10 20:32 ` Johannes Schindelin
2008-02-08 18:14 ` Harvey Harrison
2008-02-09 14:27 ` Jan Holesovsky
2008-02-08 18:20 ` Johannes Schindelin
2008-02-08 18:49 ` Mike Hommey
2008-02-08 19:04 ` Johannes Schindelin
2008-02-09 15:06 ` Jan Holesovsky
2008-02-08 19:00 ` Jakub Narebski
2008-02-08 19:26 ` Jon Smirl
2008-02-08 20:09 ` Nicolas Pitre
2008-02-11 10:13 ` Andreas Ericsson
2008-02-12 2:55 ` [PATCH 1/2] pack-objects: Allow setting the #threads equal to #cpus automatically Brandon Casey
2008-02-12 5:53 ` Andreas Ericsson
[not found] ` <1202784078-23700-1-git-send-email-casey@nrlssc.navy.mil>
2008-02-12 2:59 ` [PATCH 2/2] pack-objects: Default to zero threads, meaning auto-assign to #cpus Brandon Casey
2008-02-12 4:57 ` Nicolas Pitre
2008-02-08 20:19 ` Harvey Harrison [this message]
2008-02-08 20:24 ` [PATCH] RFC: git lazy clone proof-of-concept Jon Smirl
2008-02-08 20:25 ` Harvey Harrison
2008-02-08 20:41 ` Jon Smirl
2008-02-09 15:27 ` Jan Holesovsky
2008-02-10 3:10 ` Nicolas Pitre
2008-02-10 4:59 ` Sean
2008-02-10 5:22 ` Nicolas Pitre
2008-02-10 5:35 ` Sean
2008-02-11 1:42 ` Jakub Narebski
2008-02-11 2:04 ` Nicolas Pitre
2008-02-11 10:11 ` Jakub Narebski
2008-02-10 9:34 ` Joachim B Haga
2008-02-10 16:43 ` Johannes Schindelin
2008-02-10 17:01 ` Jon Smirl
2008-02-10 17:36 ` Johannes Schindelin
2008-02-10 18:47 ` Johannes Schindelin
2008-02-10 19:42 ` Nicolas Pitre
2008-02-10 20:11 ` Jon Smirl
2008-02-12 20:37 ` Johannes Schindelin
2008-02-12 21:05 ` Nicolas Pitre
2008-02-12 21:08 ` Linus Torvalds
2008-02-12 21:36 ` Jon Smirl
2008-02-12 21:59 ` Linus Torvalds
2008-02-12 22:25 ` Linus Torvalds
2008-02-12 22:43 ` Jon Smirl
2008-02-12 23:39 ` Linus Torvalds
2008-02-12 21:25 ` Jon Smirl
2008-02-14 19:20 ` Johannes Schindelin
2008-02-14 20:05 ` Jakub Narebski
2008-02-14 20:16 ` Nicolas Pitre
2008-02-14 21:04 ` Johannes Schindelin
2008-02-14 21:59 ` Jakub Narebski
2008-02-14 23:38 ` Johannes Schindelin
2008-02-14 23:51 ` Brian Downing
2008-02-14 23:57 ` Brian Downing
2008-02-15 0:08 ` Johannes Schindelin
2008-02-15 1:41 ` Nicolas Pitre
2008-02-17 8:18 ` Shawn O. Pearce
2008-02-17 9:05 ` Junio C Hamano
2008-02-17 18:44 ` Nicolas Pitre
2008-02-15 1:07 ` Jakub Narebski
2008-02-15 9:43 ` Jan Holesovsky
2008-02-14 21:08 ` Brandon Casey
2008-02-15 9:34 ` Jan Holesovsky
2008-02-10 19:50 ` Nicolas Pitre
2008-02-14 19:41 ` Brandon Casey
2008-02-14 19:58 ` Johannes Schindelin
2008-02-14 20:11 ` Nicolas Pitre
2008-02-11 1:20 ` Jakub Narebski
2008-02-08 20:16 ` Johannes Schindelin
2008-02-08 21:35 ` Jakub Narebski
2008-02-08 21:52 ` Johannes Schindelin
2008-02-08 22:03 ` Mike Hommey
2008-02-08 22:34 ` Johannes Schindelin
2008-02-08 22:50 ` Mike Hommey
2008-02-08 23:14 ` Johannes Schindelin
2008-02-08 23:38 ` Mike Hommey
2008-02-09 21:20 ` Jan Hudec
2008-02-09 15:54 ` Jan Holesovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1202502007.12966.30.camel@brick \
--to=harvey.harrison@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=jnareb@gmail.com \
--cc=jonsmirl@gmail.com \
--cc=kendy@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).