[PATCH v3 1/3] build dashless "bin-wrappers" directory similar to installed bindir

[Matthew Ogilvie <mmogilvi_git@miniinfo.net>]

The new bin-wrappers directory contains wrapper scripts
for executables that will be installed into the standard
bindir.  It explicitly does not contain most dashed-commands.
The scripts automatically set environment variables to run out
of the source tree, not the installed directory.

This will allow running the test suite without dashed commands in
the PATH.  It also provides a simplified way to test run custom
built git executables without installing them first.

bin-wrappers also contains wrappers for some test suite support
executables, where the test suite will soon make use of them.

Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
---
 .gitignore      |    1 +
 Makefile        |   49 ++++++++++++++++++++++++++++++++++++-------------
 wrap-for-bin.sh |   15 +++++++++++++++
 3 files changed, 52 insertions(+), 13 deletions(-)
 create mode 100644 wrap-for-bin.sh

diff --git a/.gitignore b/.gitignore
index ac02a58..5d32289 100644
--- a/.gitignore
+++ b/.gitignore
@@ -2,6 +2,7 @@
 /GIT-CFLAGS
 /GIT-GUI-VARS
 /GIT-VERSION-FILE
+/bin-wrappers/
 /git
 /git-add
 /git-add--interactive
diff --git a/Makefile b/Makefile
index 4a1e5bc..378962e 100644
--- a/Makefile
+++ b/Makefile
@@ -427,6 +427,15 @@ ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
 # what 'all' will build but not install in gitexecdir
 OTHER_PROGRAMS = git$X
 
+# what test wrappers are needed and 'install' will install, in bindir
+BINDIR_PROGRAMS_NEED_X += git
+BINDIR_PROGRAMS_NEED_X += git-upload-pack
+BINDIR_PROGRAMS_NEED_X += git-receive-pack
+BINDIR_PROGRAMS_NEED_X += git-upload-archive
+BINDIR_PROGRAMS_NEED_X += git-shell
+
+BINDIR_PROGRAMS_NO_X += git-cvsserver
+
 # Set paths to tools early so that they can be used for version tests.
 ifndef SHELL_PATH
 	SHELL_PATH = /bin/sh
@@ -1714,19 +1723,30 @@ endif
 
 ### Testing rules
 
-TEST_PROGRAMS += test-chmtime$X
-TEST_PROGRAMS += test-ctype$X
-TEST_PROGRAMS += test-date$X
-TEST_PROGRAMS += test-delta$X
-TEST_PROGRAMS += test-dump-cache-tree$X
-TEST_PROGRAMS += test-genrandom$X
-TEST_PROGRAMS += test-match-trees$X
-TEST_PROGRAMS += test-parse-options$X
-TEST_PROGRAMS += test-path-utils$X
-TEST_PROGRAMS += test-sha1$X
-TEST_PROGRAMS += test-sigchain$X
+TEST_PROGRAMS_NEED_X += test-chmtime
+TEST_PROGRAMS_NEED_X += test-ctype
+TEST_PROGRAMS_NEED_X += test-date
+TEST_PROGRAMS_NEED_X += test-delta
+TEST_PROGRAMS_NEED_X += test-dump-cache-tree
+TEST_PROGRAMS_NEED_X += test-genrandom
+TEST_PROGRAMS_NEED_X += test-match-trees
+TEST_PROGRAMS_NEED_X += test-parse-options
+TEST_PROGRAMS_NEED_X += test-path-utils
+TEST_PROGRAMS_NEED_X += test-sha1
+TEST_PROGRAMS_NEED_X += test-sigchain
+
+TEST_PROGRAMS = $(patsubst %,%$X,$(TEST_PROGRAMS_NEED_X))
 
-all:: $(TEST_PROGRAMS)
+test_bindir_programs := $(patsubst %,bin-wrappers/%,$(BINDIR_PROGRAMS_NEED_X) $(BINDIR_PROGRAMS_NO_X) $(TEST_PROGRAMS_NEED_X))
+
+all:: $(TEST_PROGRAMS) $(test_bindir_programs)
+
+bin-wrappers/%: wrap-for-bin.sh
+	@mkdir -p bin-wrappers
+	$(QUIET_GEN)sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
+	     -e 's|@@BUILD_DIR@@|$(shell pwd)|' \
+	     -e 's|@@PROG@@|$(@F)|' < $< > $@ && \
+	chmod +x $@
 
 # GNU make supports exporting all variables by "export" without parameters.
 # However, the environment gets quite big, and some programs have problems
@@ -1787,11 +1807,13 @@ endif
 gitexec_instdir_SQ = $(subst ','\'',$(gitexec_instdir))
 export gitexec_instdir
 
+install_bindir_programs := $(patsubst %,%$X,$(BINDIR_PROGRAMS_NEED_X)) $(BINDIR_PROGRAMS_NO_X)
+
 install: all
 	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
 	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
 	$(INSTALL) $(ALL_PROGRAMS) '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
-	$(INSTALL) git$X git-upload-pack$X git-receive-pack$X git-upload-archive$X git-shell$X git-cvsserver '$(DESTDIR_SQ)$(bindir_SQ)'
+	$(INSTALL) $(install_bindir_programs) '$(DESTDIR_SQ)$(bindir_SQ)'
 	$(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install
 ifndef NO_PERL
 	$(MAKE) -C perl prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install
@@ -1902,6 +1924,7 @@ clean:
 		$(LIB_FILE) $(XDIFF_LIB)
 	$(RM) $(ALL_PROGRAMS) $(BUILT_INS) git$X
 	$(RM) $(TEST_PROGRAMS)
+	$(RM) -r bin-wrappers
 	$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope*
 	$(RM) -r autom4te.cache
 	$(RM) config.log config.mak.autogen config.mak.append config.status config.cache
diff --git a/wrap-for-bin.sh b/wrap-for-bin.sh
new file mode 100644
index 0000000..c5075c9
--- /dev/null
+++ b/wrap-for-bin.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+# wrap-for-bin.sh: Template for git executable wrapper scripts
+# to run test suite against sandbox, but with only bindir-installed
+# executables in PATH.  The Makefile copies this into various
+# files in bin-wrappers, substituting
+# @@BUILD_DIR@@ and @@PROG@@.
+
+GIT_EXEC_PATH='@@BUILD_DIR@@'
+GIT_TEMPLATE_DIR='@@BUILD_DIR@@/templates/blt'
+GITPERLLIB='@@BUILD_DIR@@/perl/blib/lib'
+PATH='@@BUILD_DIR@@/bin-wrappers:'"$PATH"
+export GIT_EXEC_PATH GIT_TEMPLATE_DIR GITPERLLIB PATH
+
+exec "${GIT_EXEC_PATH}/@@PROG@@" "$@"
-- 
1.6.6.rc1