* [PATCH 01/11] rename git-p4 tests
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 02/11] git-p4: introduce asciidoc documentation Pete Wyckoff
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
Use consistent naming for all tests: "t98<num>-git-p4-<topic>.sh"
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/{t9800-git-p4.sh => t9800-git-p4-basic.sh} | 0
...etachars.sh => t9803-git-p4-shell-metachars.sh} | 0
...it-edit.sh => t9805-git-p4-skip-submit-edit.sh} | 0
t/{t9807-submit.sh => t9807-git-p4-submit.sh} | 0
t/{t9808-chdir.sh => t9808-git-p4-chdir.sh} | 0
5 files changed, 0 insertions(+), 0 deletions(-)
rename t/{t9800-git-p4.sh => t9800-git-p4-basic.sh} (100%)
rename t/{t9803-git-shell-metachars.sh => t9803-git-p4-shell-metachars.sh} (100%)
rename t/{t9805-skip-submit-edit.sh => t9805-git-p4-skip-submit-edit.sh} (100%)
rename t/{t9807-submit.sh => t9807-git-p4-submit.sh} (100%)
rename t/{t9808-chdir.sh => t9808-git-p4-chdir.sh} (100%)
diff --git a/t/t9800-git-p4.sh b/t/t9800-git-p4-basic.sh
similarity index 100%
rename from t/t9800-git-p4.sh
rename to t/t9800-git-p4-basic.sh
diff --git a/t/t9803-git-shell-metachars.sh b/t/t9803-git-p4-shell-metachars.sh
similarity index 100%
rename from t/t9803-git-shell-metachars.sh
rename to t/t9803-git-p4-shell-metachars.sh
diff --git a/t/t9805-skip-submit-edit.sh b/t/t9805-git-p4-skip-submit-edit.sh
similarity index 100%
rename from t/t9805-skip-submit-edit.sh
rename to t/t9805-git-p4-skip-submit-edit.sh
diff --git a/t/t9807-submit.sh b/t/t9807-git-p4-submit.sh
similarity index 100%
rename from t/t9807-submit.sh
rename to t/t9807-git-p4-submit.sh
diff --git a/t/t9808-chdir.sh b/t/t9808-git-p4-chdir.sh
similarity index 100%
rename from t/t9808-chdir.sh
rename to t/t9808-git-p4-chdir.sh
--
1.7.8.534.g03ab.dirty
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 02/11] git-p4: introduce asciidoc documentation
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
2011-12-25 2:07 ` [PATCH 01/11] rename git-p4 tests Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 03/11] git-p4: clone does not use --git-dir Pete Wyckoff
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git; +Cc: Frans Klaver, Luke Diamand
Add proper documentation for git-p4. Delete the old .txt
documentation from contrib/fast-import.
Cc: Frans Klaver <fransklaver@gmail.com>
Cc: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
Documentation/git-p4.txt | 456 ++++++++++++++++++++++++++++++++++++++++
contrib/fast-import/git-p4.txt | 302 --------------------------
2 files changed, 456 insertions(+), 302 deletions(-)
create mode 100644 Documentation/git-p4.txt
delete mode 100644 contrib/fast-import/git-p4.txt
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
new file mode 100644
index 0000000..c981407
--- /dev/null
+++ b/Documentation/git-p4.txt
@@ -0,0 +1,456 @@
+git-p4(1)
+=========
+
+NAME
+----
+git-p4 - Import from and submit to Perforce repositories
+
+
+SYNOPSIS
+--------
+[verse]
+'git p4 clone' [<sync options>] [<clone options>] <p4 depot path>...
+'git p4 sync' [<sync options>] [<p4 depot path>...]
+'git p4 rebase'
+'git p4 submit' [<submit options>] [<master branch name>]
+
+
+DESCRIPTION
+-----------
+This command provides a way to interact with p4 repositories
+using git.
+
+Create a new git repository from an existing p4 repository using
+'git p4 clone', giving it one or more p4 depot paths. Incorporate
+new commits from p4 changes with 'git p4 sync'. The 'sync' command
+is also used to include new branches from other p4 depot paths.
+Submit git changes back to p4 using 'git p4 submit'. The command
+'git p4 rebase' does a sync plus rebases the current branch onto
+the updated p4 remote branch.
+
+
+EXAMPLE
+-------
+* Create an alias for 'git p4', using the full path to the 'git-p4'
+ script if needed:
++
+------------
+$ git config --global alias.p4 '!git-p4'
+------------
+
+* Clone a repository:
++
+------------
+$ git p4 clone //depot/path/project
+------------
+
+* Do some work in the newly created git repository:
++
+------------
+$ cd project
+$ vi foo.h
+$ git commit -a -m "edited foo.h"
+------------
+
+* Update the git repository with recent changes from p4, rebasing your
+ work on top:
++
+------------
+$ git p4 rebase
+------------
+
+* Submit your commits back to p4:
++
+------------
+$ git p4 submit
+------------
+
+
+COMMANDS
+--------
+
+Clone
+~~~~~
+Generally, 'git p4 clone' is used to create a new git directory
+from an existing p4 repository:
+------------
+$ git p4 clone //depot/path/project
+------------
+This:
+
+1. Creates an empty git repository in a subdirectory called 'project'.
++
+2. Imports the full contents of the head revision from the given p4
+depot path into a single commit in the git branch 'refs/remotes/p4/master'.
++
+3. Creates a local branch, 'master' from this remote and checks it out.
+
+To reproduce the entire p4 history in git, use the '@all' modifier on
+the depot path:
+------------
+$ git p4 clone //depot/path/project@all
+------------
+
+
+Sync
+~~~~
+As development continues in the p4 repository, those changes can
+be included in the git repository using:
+------------
+$ git p4 sync
+------------
+This command finds new changes in p4 and imports them as git commits.
+
+P4 repositories can be added to an existing git repository using
+'git p4 sync' too:
+------------
+$ mkdir repo-git
+$ cd repo-git
+$ git init
+$ git p4 sync //path/in/your/perforce/depot
+------------
+This imports the specified depot into
+'refs/remotes/p4/master' in an existing git repository. The
+'--branch' option can be used to specify a different branch to
+be used for the p4 content.
+
+If a git repository includes branches 'refs/remotes/origin/p4', these
+will be fetched and consulted first during a 'git p4 sync'. Since
+importing directly from p4 is considerably slower than pulling changes
+from a git remote, this can be useful in a multi-developer environment.
+
+
+Rebase
+~~~~~~
+A common working pattern is to fetch the latest changes from the p4 depot
+and merge them with local uncommitted changes. Often, the p4 repository
+is the ultimate location for all code, thus a rebase workflow makes
+sense. This command does 'git p4 sync' followed by 'git rebase' to move
+local commits on top of updated p4 changes.
+------------
+$ git p4 rebase
+------------
+
+
+Submit
+~~~~~~
+Submitting changes from a git repository back to the p4 repository
+requires a separate p4 client workspace. This should be specified
+using the 'P4CLIENT' environment variable or the git configuration
+variable 'git-p4.client'. The p4 client must exist, but the client root
+will be created and populated if it does not already exist.
+
+To submit all changes that are in the current git branch but not in
+the 'p4/master' branch, use:
+------------
+$ git p4 submit
+------------
+
+To specify a branch other than the current one, use:
+------------
+$ git p4 submit topicbranch
+------------
+
+The upstream reference is generally 'refs/remotes/p4/master', but can
+be overridden using the '--origin=' command-line option.
+
+The p4 changes will be created as the user invoking 'git p4 submit'. The
+'--preserve-user' option will cause ownership to be modified
+according to the author of the git commit. This option requires admin
+privileges in p4, which can be granted using 'p4 protect'.
+
+
+OPTIONS
+-------
+
+General options
+~~~~~~~~~~~~~~~
+All commands except clone accept this option.
+
+--git-dir <dir>::
+ Set the 'GIT_DIR' environment variable. See linkgit:git[1].
+
+Sync options
+~~~~~~~~~~~~
+These options can be used in the initial 'clone' as well as in
+subsequent 'sync' operations.
+
+--branch <branch>::
+ Import changes into given branch. If the branch starts with
+ 'refs/', it will be used as is, otherwise the path 'refs/heads/'
+ will be prepended. The default branch is 'master'.
+
+--detect-branches::
+ Use the branch detection algorithm to find new paths in p4. It is
+ documented below in "BRANCH DETECTION".
+
+--changesfile <file>::
+ Import exactly the p4 change numbers listed in 'file', one per
+ line. Normally, 'git p4' inspects the current p4 repository
+ state and detects the changes it should import.
+
+--silent::
+ Do not print any progress information.
+
+--verbose::
+ Provide more progress information.
+
+--detect-labels::
+ Query p4 for labels associated with the depot paths, and add
+ them as tags in git.
+
+--import-local::
+ By default, p4 branches are stored in 'refs/remotes/p4/',
+ where they will be treated as remote-tracking branches by
+ linkgit:git-branch[1] and other commands. This option instead
+ puts p4 branches in 'refs/heads/p4/'.
+
+--max-changes <n>::
+ Limit the number of imported changes to 'n'. Useful to
+ limit the amount of history when using the '@all' p4 revision
+ specifier.
+
+--keep-path::
+ The mapping of file names from the p4 depot path to git, by
+ default, involves removing the entire depot path. With this
+ option, the full p4 depot path is retained in git. For example,
+ path '//depot/main/foo/bar.c', when imported from
+ '//depot/main/', becomes 'foo/bar.c'. With '--keep-path', the
+ git path is instead 'depot/main/foo/bar.c'.
+
+--use-client-spec::
+ Use a client spec to find the list of interesting files in p4.
+ The client spec is discovered using 'p4 client -o' which checks
+ the 'P4CLIENT' environment variable and returns a mapping of
+ depot files to workspace files.
+
+Clone options
+~~~~~~~~~~~~~
+These options can be used in an initial 'clone', along with the 'sync'
+options described above.
+
+--destination <directory>::
+ Where to create the git repository. If not provided, the last
+ component in the p4 depot path is used to create a new
+ directory.
+
+--bare::
+ Perform a bare clone. See linkgit:git-clone[1].
+
+-/ <path>::
+ Exclude selected depot paths when cloning.
+
+Submit options
+~~~~~~~~~~~~~~
+These options can be used to modify 'git p4 submit' behavior.
+
+--verbose::
+ Provide more progress information.
+
+--origin <commit>::
+ Upstream location from which commits are identified to submit to
+ p4. By default, this is the most recent p4 commit reachable
+ from 'HEAD'.
+
+-M[<n>]::
+ Detect renames. See linkgit:git-diff[1]. Renames will be
+ represented in p4 using explicit 'move' operations.
+
+--preserve-user::
+ Re-author p4 changes before submitting to p4. This option
+ requires p4 admin privileges.
+
+
+DEPOT PATH SYNTAX
+-----------------
+The p4 depot path argument to 'git p4 sync' and 'git p4 clone' can
+be one or more space-separated p4 depot paths, with an optional
+p4 revision specifier on the end:
+
+"//depot/my/project"::
+ Import one commit with all files in the '#head' change under that tree.
+
+"//depot/my/project@all"::
+ Import one commit for each change in the history of that depot path.
+
+"//depot/my/project@1,6"::
+ Import only changes 1 through 6.
+
+"//depot/proj1 //depot/proj2@all"::
+ Import all changes from both named depot paths.
+
+See 'p4 help revisions' for the full syntax of p4 revision specifiers.
+
+
+BRANCH DETECTION
+----------------
+P4 does not have the same concept of a branch as git. Instead,
+p4 organizes its content as a directory tree, where by convention
+different logical branches are in different locations in the tree.
+The 'p4 branch' command is used to maintain mappings between
+different areas in the tree, and indicate related content. 'git p4'
+can use these mappings to determine branch relationships.
+
+If you have a repository where all the branches of interest exist as
+subdirectories of a single depot path, you can use '--detect-branches'
+when cloning or syncing to have 'git p4' automatically find
+subdirectories in p4, and to generate these as branches in git.
+
+For example, if the P4 repository structure is:
+----
+//depot/main/...
+//depot/branch1/...
+----
+
+And "p4 branch -o branch1" shows a View line that looks like:
+----
+//depot/main/... //depot/branch1/...
+----
+
+Then this 'git p4 clone' command:
+----
+git p4 clone --detect-branches //depot@all
+----
+produces a separate branch in 'refs/remotes/p4/' for //depot/main,
+called 'master', and one for //depot/branch1 called 'depot/branch1'.
+
+However, it is not necessary to create branches in p4 to be able to use
+them like branches. Because it is difficult to infer branch
+relationships automatically, a git configuration setting
+'git-p4.branchList' can be used to explicitly identify branch
+relationships. It is a list of "source:destination" pairs, like a
+simple p4 branch specification, where the "source" and "destination" are
+the path elements in the p4 repository. The example above relied on the
+presence of the p4 branch. Without p4 branches, the same result will
+occur with:
+----
+git config git-p4.branchList main:branch1
+git p4 clone --detect-branches //depot@all
+----
+
+
+PERFORMANCE
+-----------
+The fast-import mechanism used by 'git p4' creates one pack file for
+each invocation of 'git p4 sync'. Normally, git garbage compression
+(linkgit:git-gc[1]) automatically compresses these to fewer pack files,
+but explicit invocation of 'git repack -adf' may improve performance.
+
+
+CONFIGURATION VARIABLES
+-----------------------
+The following config settings can be used to modify 'git p4' behavior.
+They all are in the 'git-p4' section.
+
+General variables
+~~~~~~~~~~~~~~~~~
+git-p4.user::
+ User specified as an option to all p4 commands, with '-u <user>'.
+ The environment variable 'P4USER' can be used instead.
+
+git-p4.password::
+ Password specified as an option to all p4 commands, with
+ '-P <password>'.
+ The environment variable 'P4PASS' can be used instead.
+
+git-p4.port::
+ Port specified as an option to all p4 commands, with
+ '-p <port>'.
+ The environment variable 'P4PORT' can be used instead.
+
+git-p4.host::
+ Host specified as an option to all p4 commands, with
+ '-h <host>'.
+ The environment variable 'P4HOST' can be used instead.
+
+git-p4.client::
+ Client specified as an option to all p4 commands, with
+ '-c <client>'. This can also be used as a way to find
+ the client spec for the 'useClientSpec' option.
+ The environment variable 'P4CLIENT' can be used instead.
+
+Clone and sync variables
+~~~~~~~~~~~~~~~~~~~~~~~~
+git-p4.syncFromOrigin::
+ Because importing commits from other git repositories is much faster
+ than importing them from p4, a mechanism exists to find p4 changes
+ first in git remotes. If branches exist under 'refs/remote/origin/p4',
+ those will be fetched and used when syncing from p4. This
+ variable can be set to 'false' to disable this behavior.
+
+git-p4.branchUser::
+ One phase in branch detection involves looking at p4 branches
+ to find new ones to import. By default, all branches are
+ inspected. This option limits the search to just those owned
+ by the single user named in the variable.
+
+git-p4.branchList::
+ List of branches to be imported when branch detection is
+ enabled. Each entry should be a pair of branch names separated
+ by a colon (:). This example declares that both branchA and
+ branchB were created from main:
+-------------
+git config git-p4.branchList main:branchA
+git config --add git-p4.branchList main:branchB
+-------------
+
+git-p4.useClientSpec::
+ Specify that the p4 client spec to be used to identify p4 depot
+ paths of interest. This is equivalent to specifying the option
+ '--use-client-spec'. The variable 'git-p4.client' can be used
+ to specify the name of the client.
+
+Submit variables
+~~~~~~~~~~~~~~~~
+git-p4.detectRenames::
+ Detect renames. See linkgit:git-diff[1].
+
+git-p4.detectCopies::
+ Detect copies. See linkgit:git-diff[1].
+
+git-p4.detectCopiesHarder::
+ Detect copies harder. See linkgit:git-diff[1].
+
+git-p4.preserveUser::
+ On submit, re-author changes to reflect the git author,
+ regardless of who invokes 'git p4 submit'.
+
+git-p4.allowMissingP4Users::
+ When 'preserveUser' is true, 'git p4' normally dies if it
+ cannot find an author in the p4 user map. This setting
+ submits the change regardless.
+
+git-p4.skipSubmitEdit::
+ The submit process invokes the editor before each p4 change
+ is submitted. If this setting is true, though, the editing
+ step is skipped.
+
+git-p4.skipSubmitEditCheck::
+ After editing the p4 change message, 'git p4' makes sure that
+ the description really was changed by looking at the file
+ modification time. This option disables that test.
+
+git-p4.allowSubmit::
+ By default, any branch can be used as the source for a 'git p4
+ submit' operation. This configuration variable, if set, permits only
+ the named branches to be used as submit sources.
+
+git-p4.skipUserNameCheck::
+ If the user running 'git p4 submit' does not exist in the p4
+ user map, 'git p4' exits. This option can be used to force
+ submission regardless.
+
+
+IMPLEMENTATION DETAILS
+----------------------
+* Changesets from p4 are imported using git fast-import.
+* Cloning or syncing does not require a p4 client; file contents are
+ collected using 'p4 print'.
+* Submitting requires a p4 client, which is not in the same location
+ as the git repository. Patches are applied, one at a time, to
+ this p4 client and submitted from there.
+* Each commit imported by 'git p4' has a line at the end of the log
+ message indicating the p4 depot location and change number. This
+ line is used by later 'git p4 sync' operations to know which p4
+ changes are new.
+
diff --git a/contrib/fast-import/git-p4.txt b/contrib/fast-import/git-p4.txt
deleted file mode 100644
index 5044a12..0000000
--- a/contrib/fast-import/git-p4.txt
+++ /dev/null
@@ -1,302 +0,0 @@
-git-p4 - Perforce <-> Git converter using git-fast-import
-
-Usage
-=====
-
-git-p4 can be used in two different ways:
-
-1) To import changes from Perforce to a Git repository, using "git-p4 sync".
-
-2) To submit changes from Git back to Perforce, using "git-p4 submit".
-
-Importing
-=========
-
-Simply start with
-
- git-p4 clone //depot/path/project
-
-or
-
- git-p4 clone //depot/path/project myproject
-
-This will:
-
-1) Create an empty git repository in a subdirectory called "project" (or
-"myproject" with the second command)
-
-2) Import the head revision from the given Perforce path into a git branch
-called "p4" (remotes/p4 actually)
-
-3) Create a master branch based on it and check it out.
-
-If you want the entire history (not just the head revision) then you can simply
-append a "@all" to the depot path:
-
- git-p4 clone //depot/project/main@all myproject
-
-
-
-If you want more control you can also use the git-p4 sync command directly:
-
- mkdir repo-git
- cd repo-git
- git init
- git-p4 sync //path/in/your/perforce/depot
-
-This will import the current head revision of the specified depot path into a
-"remotes/p4/master" branch of your git repository. You can use the
---branch=mybranch option to import into a different branch.
-
-If you want to import the entire history of a given depot path simply use:
-
- git-p4 sync //path/in/depot@all
-
-
-Note:
-
-To achieve optimal compression you may want to run 'git repack -a -d -f' after
-a big import. This may take a while.
-
-Incremental Imports
-===================
-
-After an initial import you can continue to synchronize your git repository
-with newer changes from the Perforce depot by just calling
-
- git-p4 sync
-
-in your git repository. By default the "remotes/p4/master" branch is updated.
-
-Advanced Setup
-==============
-
-Suppose you have a periodically updated git repository somewhere, containing a
-complete import of a Perforce project. This repository can be cloned and used
-with git-p4. When updating the cloned repository with the "sync" command,
-git-p4 will try to fetch changes from the original repository first. The git
-protocol used with this is usually faster than importing from Perforce
-directly.
-
-This behaviour can be disabled by setting the "git-p4.syncFromOrigin" git
-configuration variable to "false".
-
-Updating
-========
-
-A common working pattern is to fetch the latest changes from the Perforce depot
-and merge them with local uncommitted changes. The recommended way is to use
-git's rebase mechanism to preserve linear history. git-p4 provides a convenient
-
- git-p4 rebase
-
-command that calls git-p4 sync followed by git rebase to rebase the current
-working branch.
-
-Submitting
-==========
-
-git-p4 has support for submitting changes from a git repository back to the
-Perforce depot. This requires a Perforce checkout separate from your git
-repository. To submit all changes that are in the current git branch but not in
-the "p4" branch (or "origin" if "p4" doesn't exist) simply call
-
- git-p4 submit
-
-in your git repository. If you want to submit changes in a specific branch that
-is not your current git branch you can also pass that as an argument:
-
- git-p4 submit mytopicbranch
-
-You can override the reference branch with the --origin=mysourcebranch option.
-
-The Perforce changelists will be created with the user who ran git-p4. If you
-use --preserve-user then git-p4 will attempt to create Perforce changelists
-with the Perforce user corresponding to the git commit author. You need to
-have sufficient permissions within Perforce, and the git users need to have
-Perforce accounts. Permissions can be granted using 'p4 protect'.
-
-If a submit fails you may have to "p4 resolve" and submit manually. You can
-continue importing the remaining changes with
-
- git-p4 submit --continue
-
-Example
-=======
-
-# Clone a repository
- git-p4 clone //depot/path/project
-# Enter the newly cloned directory
- cd project
-# Do some work...
- vi foo.h
-# ... and commit locally to gi
- git commit foo.h
-# In the meantime somebody submitted changes to the Perforce depot. Rebase your latest
-# changes against the latest changes in Perforce:
- git-p4 rebase
-# Submit your locally committed changes back to Perforce
- git-p4 submit
-# ... and synchronize with Perforce
- git-p4 rebase
-
-
-Configuration parameters
-========================
-
-git-p4.user ($P4USER)
-
-Allows you to specify the username to use to connect to the Perforce repository.
-
- git config [--global] git-p4.user public
-
-git-p4.password ($P4PASS)
-
-Allows you to specify the password to use to connect to the Perforce repository.
-Warning this password will be visible on the command-line invocation of the p4 binary.
-
- git config [--global] git-p4.password public1234
-
-git-p4.port ($P4PORT)
-
-Specify the port to be used to contact the Perforce server. As this will be passed
-directly to the p4 binary, it may be in the format host:port as well.
-
- git config [--global] git-p4.port codes.zimbra.com:2666
-
-git-p4.host ($P4HOST)
-
-Specify the host to contact for a Perforce repository.
-
- git config [--global] git-p4.host perforce.example.com
-
-git-p4.client ($P4CLIENT)
-
-Specify the client name to use
-
- git config [--global] git-p4.client public-view
-
-git-p4.allowSubmit
-
- git config [--global] git-p4.allowSubmit false
-
-git-p4.syncFromOrigin
-
-A useful setup may be that you have a periodically updated git repository
-somewhere that contains a complete import of a Perforce project. That git
-repository can be used to clone the working repository from and one would
-import from Perforce directly after cloning using git-p4. If the connection to
-the Perforce server is slow and the working repository hasn't been synced for a
-while it may be desirable to fetch changes from the origin git repository using
-the efficient git protocol. git-p4 supports this setup by calling "git fetch origin"
-by default if there is an origin branch. You can disable this using:
-
- git config [--global] git-p4.syncFromOrigin false
-
-git-p4.useclientspec
-
- git config [--global] git-p4.useclientspec false
-
-The P4CLIENT environment variable should be correctly set for p4 to be
-able to find the relevant client. This client spec will be used to
-both filter the files cloned by git and set the directory layout as
-specified in the client (this implies --keep-path style semantics).
-
-git-p4.skipSubmitEdit
-
- git config [--global] git-p4.skipSubmitEdit false
-
-Normally, git-p4 invokes an editor after each commit is applied so
-that you can make changes to the submit message. Setting this
-variable to true will skip the editing step, submitting the change as is.
-
-git-p4.skipSubmitEditCheck
-
- git config [--global] git-p4.skipSubmitEditCheck false
-
-After the editor is invoked, git-p4 normally makes sure you saved the
-change description, as an indication that you did indeed read it over
-and edit it. You can quit without saving to abort the submit (or skip
-this change and continue). Setting this variable to true will cause
-git-p4 not to check if you saved the change description. This variable
-only matters if git-p4.skipSubmitEdit has not been set to true.
-
-git-p4.preserveUser
-
- git config [--global] git-p4.preserveUser false
-
-If true, attempt to preserve user names by modifying the p4 changelists. See
-the "--preserve-user" submit option.
-
-git-p4.allowMissingPerforceUsers
-
- git config [--global] git-p4.allowMissingP4Users false
-
-If git-p4 is setting the perforce user for a commit (--preserve-user) then
-if there is no perforce user corresponding to the git author, git-p4 will
-stop. With allowMissingPerforceUsers set to true, git-p4 will use the
-current user (i.e. the behavior without --preserve-user) and carry on with
-the perforce commit.
-
-git-p4.skipUserNameCheck
-
- git config [--global] git-p4.skipUserNameCheck false
-
-When submitting, git-p4 checks that the git commits are authored by the current
-p4 user, and warns if they are not. This disables the check.
-
-git-p4.detectRenames
-
-Detect renames when submitting changes to Perforce server. Will enable -M git
-argument. Can be optionally set to a number representing the threshold
-percentage value of the rename detection.
-
- git config [--global] git-p4.detectRenames true
- git config [--global] git-p4.detectRenames 50
-
-git-p4.detectCopies
-
-Detect copies when submitting changes to Perforce server. Will enable -C git
-argument. Can be optionally set to a number representing the threshold
-percentage value of the copy detection.
-
- git config [--global] git-p4.detectCopies true
- git config [--global] git-p4.detectCopies 80
-
-git-p4.detectCopiesHarder
-
-Detect copies even between files that did not change when submitting changes to
-Perforce server. Will enable --find-copies-harder git argument.
-
- git config [--global] git-p4.detectCopies true
-
-git-p4.branchUser
-
-Only use branch specifications defined by the selected username.
-
- git config [--global] git-p4.branchUser username
-
-git-p4.branchList
-
-List of branches to be imported when branch detection is enabled.
-
- git config [--global] git-p4.branchList main:branchA
- git config [--global] --add git-p4.branchList main:branchB
-
-Implementation Details...
-=========================
-
-* Changesets from Perforce are imported using git fast-import.
-* The import does not require anything from the Perforce client view as it just uses
- "p4 print //depot/path/file#revision" to get the actual file contents.
-* Every imported changeset has a special [git-p4...] line at the
- end of the log message that gives information about the corresponding
- Perforce change number and is also used by git-p4 itself to find out
- where to continue importing when doing incremental imports.
- Basically when syncing it extracts the perforce change number of the
- latest commit in the "p4" branch and uses "p4 changes //depot/path/...@changenum,#head"
- to find out which changes need to be imported.
-* git-p4 submit uses "git rev-list" to pick the commits between the "p4" branch
- and the current branch.
- The commits themselves are applied using git diff/format-patch ... | git apply
-
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 03/11] git-p4: clone does not use --git-dir
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
2011-12-25 2:07 ` [PATCH 01/11] rename git-p4 tests Pete Wyckoff
2011-12-25 2:07 ` [PATCH 02/11] git-p4: introduce asciidoc documentation Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 04/11] git-p4: test cloning with two dirs, clarify doc Pete Wyckoff
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
Complain if --git-dir is given during a clone. It has no
effect. Only --destination and --bare can change where the newly
cloned git dir will be.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
contrib/fast-import/git-p4 | 3 ++-
t/t9806-git-p4-options.sh | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 36 insertions(+), 1 deletions(-)
create mode 100755 t/t9806-git-p4-options.sh
diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4
index 5949803..dafc4a2 100755
--- a/contrib/fast-import/git-p4
+++ b/contrib/fast-import/git-p4
@@ -2335,7 +2335,8 @@ def main():
args = sys.argv[2:]
if len(options) > 0:
- options.append(optparse.make_option("--git-dir", dest="gitdir"))
+ if cmd.needsGit:
+ options.append(optparse.make_option("--git-dir", dest="gitdir"))
parser = optparse.OptionParser(cmd.usage.replace("%prog", "%prog " + cmdName),
options,
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
new file mode 100755
index 0000000..8044fb0
--- /dev/null
+++ b/t/t9806-git-p4-options.sh
@@ -0,0 +1,34 @@
+#!/bin/sh
+
+test_description='git-p4 options'
+
+. ./lib-git-p4.sh
+
+test_expect_success 'start p4d' '
+ start_p4d
+'
+
+test_expect_success 'init depot' '
+ (
+ cd "$cli" &&
+ echo file1 >file1 &&
+ p4 add file1 &&
+ p4 submit -d "change 1" &&
+ echo file2 >file2 &&
+ p4 add file2 &&
+ p4 submit -d "change 2" &&
+ echo file3 >file3 &&
+ p4 add file3 &&
+ p4 submit -d "change 3"
+ )
+'
+
+test_expect_success 'clone no --git-dir' '
+ test_must_fail "$GITP4" clone --git-dir=xx //depot
+'
+
+test_expect_success 'kill p4d' '
+ kill_p4d
+'
+
+test_done
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 04/11] git-p4: test cloning with two dirs, clarify doc
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
` (2 preceding siblings ...)
2011-12-25 2:07 ` [PATCH 03/11] git-p4: clone does not use --git-dir Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 05/11] git-p4: document and test clone --branch Pete Wyckoff
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
Document how git-p4 currently works when specifying multiple
depot paths:
1. No branches or directories are named.
2. Conflicting files are silently ignored---the last change
wins.
2. Option --destination is required, else the last path is construed
to be a directory.
3. Revision specifiers must be the same on all paths for them to
take effect.
Test this behavior.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
Documentation/git-p4.txt | 11 +++++++-
t/t9800-git-p4-basic.sh | 60 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 69 insertions(+), 2 deletions(-)
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
index c981407..c15b3b7 100644
--- a/Documentation/git-p4.txt
+++ b/Documentation/git-p4.txt
@@ -276,8 +276,15 @@ p4 revision specifier on the end:
"//depot/my/project@1,6"::
Import only changes 1 through 6.
-"//depot/proj1 //depot/proj2@all"::
- Import all changes from both named depot paths.
+"//depot/proj1@all //depot/proj2@all"::
+ Import all changes from both named depot paths into a single
+ repository. Only files below these directories are included.
+ There is not a subdirectory in git for each "proj1" and "proj2".
+ You must use the '--destination' option when specifying more
+ than one depot path. The revision specifier must be specified
+ identically on each depot path. If there are files in the
+ depot paths with the same name, the path with the most recently
+ updated version of the file is the one that appears in git.
See 'p4 help revisions' for the full syntax of p4 revision specifiers.
diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh
index 272de3f..04ee20e 100755
--- a/t/t9800-git-p4-basic.sh
+++ b/t/t9800-git-p4-basic.sh
@@ -65,6 +65,66 @@ test_expect_success 'git-p4 sync new branch' '
)
'
+test_expect_success 'clone two dirs' '
+ (
+ cd "$cli" &&
+ mkdir sub1 sub2 &&
+ echo sub1/f1 >sub1/f1 &&
+ echo sub2/f2 >sub2/f2 &&
+ p4 add sub1/f1 &&
+ p4 submit -d "sub1/f1" &&
+ p4 add sub2/f2 &&
+ p4 submit -d "sub2/f2"
+ ) &&
+ "$GITP4" clone --dest="$git" //depot/sub1 //depot/sub2 &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git ls-files >lines &&
+ test_line_count = 2 lines &&
+ git log --oneline p4/master >lines &&
+ test_line_count = 1 lines
+ )
+'
+
+test_expect_success 'clone two dirs, @all' '
+ (
+ cd "$cli" &&
+ echo sub1/f3 >sub1/f3 &&
+ p4 add sub1/f3 &&
+ p4 submit -d "sub1/f3"
+ ) &&
+ "$GITP4" clone --dest="$git" //depot/sub1@all //depot/sub2@all &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git ls-files >lines &&
+ test_line_count = 3 lines &&
+ git log --oneline p4/master >lines &&
+ test_line_count = 3 lines
+ )
+'
+
+test_expect_success 'clone two dirs, @all, conflicting files' '
+ (
+ cd "$cli" &&
+ echo sub2/f3 >sub2/f3 &&
+ p4 add sub2/f3 &&
+ p4 submit -d "sub2/f3"
+ ) &&
+ "$GITP4" clone --dest="$git" //depot/sub1@all //depot/sub2@all &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git ls-files >lines &&
+ test_line_count = 3 lines &&
+ git log --oneline p4/master >lines &&
+ test_line_count = 4 lines &&
+ echo sub2/f3 >expected &&
+ test_cmp expected f3
+ )
+'
+
test_expect_success 'exit when p4 fails to produce marshaled output' '
badp4dir="$TRASH_DIRECTORY/badp4dir" &&
mkdir "$badp4dir" &&
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 05/11] git-p4: document and test clone --branch
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
` (3 preceding siblings ...)
2011-12-25 2:07 ` [PATCH 04/11] git-p4: test cloning with two dirs, clarify doc Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 06/11] git-p4: honor --changesfile option and test Pete Wyckoff
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
Clone with --branch will not checkout HEAD, unless the branch
happens to be called the default refs/remotes/p4/master. The
--branch option is most useful with sync; give an example of
that.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
Documentation/git-p4.txt | 10 +++++++++-
t/t9806-git-p4-options.sh | 11 +++++++++++
2 files changed, 20 insertions(+), 1 deletions(-)
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
index c15b3b7..a5d3d81 100644
--- a/Documentation/git-p4.txt
+++ b/Documentation/git-p4.txt
@@ -178,7 +178,15 @@ subsequent 'sync' operations.
--branch <branch>::
Import changes into given branch. If the branch starts with
'refs/', it will be used as is, otherwise the path 'refs/heads/'
- will be prepended. The default branch is 'master'.
+ will be prepended. The default branch is 'master'. If used
+ with an initial clone, no HEAD will be checked out.
++
+This example imports a new remote "p4/proj2" into an existing
+git repository:
+----
+ $ git init
+ $ git p4 sync --branch=refs/remotes/p4/proj2 //depot/proj2
+----
--detect-branches::
Use the branch detection algorithm to find new paths in p4. It is
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
index 8044fb0..7e2e45a 100755
--- a/t/t9806-git-p4-options.sh
+++ b/t/t9806-git-p4-options.sh
@@ -27,6 +27,17 @@ test_expect_success 'clone no --git-dir' '
test_must_fail "$GITP4" clone --git-dir=xx //depot
'
+test_expect_success 'clone --branch' '
+ "$GITP4" clone --branch=refs/remotes/p4/sb --dest="$git" //depot &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git ls-files >files &&
+ test_line_count = 0 files &&
+ test_path_is_file .git/refs/remotes/p4/sb
+ )
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 06/11] git-p4: honor --changesfile option and test
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
` (4 preceding siblings ...)
2011-12-25 2:07 ` [PATCH 05/11] git-p4: document and test clone --branch Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 07/11] git-p4: document and test --import-local Pete Wyckoff
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
When an explicit list of changes is given, it makes no sense to
use @all or @3,5 or any of the other p4 revision specifiers.
Make the code notice when this happens, instead of just ignoring
--changesfile. Test it.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
contrib/fast-import/git-p4 | 16 +++++++++++++++-
t/t9806-git-p4-options.sh | 23 +++++++++++++++++++++++
2 files changed, 38 insertions(+), 1 deletions(-)
diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4
index dafc4a2..d0a9b0d 100755
--- a/contrib/fast-import/git-p4
+++ b/contrib/fast-import/git-p4
@@ -2024,6 +2024,17 @@ class P4Sync(Command, P4UserMap):
revision = ""
self.users = {}
+ # Make sure no revision specifiers are used when --changesfile
+ # is specified.
+ bad_changesfile = False
+ if len(self.changesFile) > 0:
+ for p in self.depotPaths:
+ if p.find("@") >= 0 or p.find("#") >= 0:
+ bad_changesfile = True
+ break
+ if bad_changesfile:
+ die("Option --changesfile is incompatible with revision specifiers")
+
newPaths = []
for p in self.depotPaths:
if p.find("@") != -1:
@@ -2040,7 +2051,10 @@ class P4Sync(Command, P4UserMap):
revision = p[hashIdx:]
p = p[:hashIdx]
elif self.previousDepotPaths == []:
- revision = "#head"
+ # pay attention to changesfile, if given, else import
+ # the entire p4 tree at the head revision
+ if len(self.changesFile) == 0:
+ revision = "#head"
p = re.sub ("\.\.\.$", "", p)
if not p.endswith("/"):
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
index 7e2e45a..7a1dba6 100755
--- a/t/t9806-git-p4-options.sh
+++ b/t/t9806-git-p4-options.sh
@@ -38,6 +38,29 @@ test_expect_success 'clone --branch' '
)
'
+test_expect_success 'clone --changesfile' '
+ cf="$TRASH_DIRECTORY/cf" &&
+ test_when_finished "rm \"$cf\"" &&
+ printf "1\n3\n" >"$cf" &&
+ "$GITP4" clone --changesfile="$cf" --dest="$git" //depot &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git log --oneline p4/master >lines &&
+ test_line_count = 2 lines
+ test_path_is_file file1 &&
+ test_path_is_missing file2 &&
+ test_path_is_file file3
+ )
+'
+
+test_expect_success 'clone --changesfile, @all' '
+ cf="$TRASH_DIRECTORY/cf" &&
+ test_when_finished "rm \"$cf\"" &&
+ printf "1\n3\n" >"$cf" &&
+ test_must_fail "$GITP4" clone --changesfile="$cf" --dest="$git" //depot@all
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 07/11] git-p4: document and test --import-local
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
` (5 preceding siblings ...)
2011-12-25 2:07 ` [PATCH 06/11] git-p4: honor --changesfile option and test Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 08/11] git-p4: test --max-changes Pete Wyckoff
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
Explain that it is needed on future syncs to find p4 branches
in refs/heads. Test this behavior.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
Documentation/git-p4.txt | 4 +++-
t/t9806-git-p4-options.sh | 22 ++++++++++++++++++++++
2 files changed, 25 insertions(+), 1 deletions(-)
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
index a5d3d81..2885b82 100644
--- a/Documentation/git-p4.txt
+++ b/Documentation/git-p4.txt
@@ -211,7 +211,9 @@ git repository:
By default, p4 branches are stored in 'refs/remotes/p4/',
where they will be treated as remote-tracking branches by
linkgit:git-branch[1] and other commands. This option instead
- puts p4 branches in 'refs/heads/p4/'.
+ puts p4 branches in 'refs/heads/p4/'. Note that future
+ sync operations must specify '--import-local' as well so that
+ they can find the p4 branches in refs/heads.
--max-changes <n>::
Limit the number of imported changes to 'n'. Useful to
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
index 7a1dba6..6770326 100755
--- a/t/t9806-git-p4-options.sh
+++ b/t/t9806-git-p4-options.sh
@@ -61,6 +61,28 @@ test_expect_success 'clone --changesfile, @all' '
test_must_fail "$GITP4" clone --changesfile="$cf" --dest="$git" //depot@all
'
+# imports both master and p4/master in refs/heads
+# requires --import-local on sync to find p4 refs/heads
+# does not update master on sync, just p4/master
+test_expect_success 'clone/sync --import-local' '
+ "$GITP4" clone --import-local --dest="$git" //depot@1,2 &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git log --oneline refs/heads/master >lines &&
+ test_line_count = 2 lines &&
+ git log --oneline refs/heads/p4/master >lines &&
+ test_line_count = 2 lines &&
+ test_must_fail "$GITP4" sync &&
+
+ "$GITP4" sync --import-local &&
+ git log --oneline refs/heads/master >lines &&
+ test_line_count = 2 lines &&
+ git log --oneline refs/heads/p4/master >lines &&
+ test_line_count = 3 lines
+ )
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 08/11] git-p4: test --max-changes
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
` (6 preceding siblings ...)
2011-12-25 2:07 ` [PATCH 07/11] git-p4: document and test --import-local Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 09/11] git-p4: test --keep-path Pete Wyckoff
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/t9806-git-p4-options.sh | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
index 6770326..cc0fd26 100755
--- a/t/t9806-git-p4-options.sh
+++ b/t/t9806-git-p4-options.sh
@@ -83,6 +83,16 @@ test_expect_success 'clone/sync --import-local' '
)
'
+test_expect_success 'clone --max-changes' '
+ "$GITP4" clone --dest="$git" --max-changes 2 //depot@all &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git log --oneline refs/heads/master >lines &&
+ test_line_count = 2 lines
+ )
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 09/11] git-p4: test --keep-path
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
` (7 preceding siblings ...)
2011-12-25 2:07 ` [PATCH 08/11] git-p4: test --max-changes Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 10/11] git-p4: test and document --use-client-spec Pete Wyckoff
2011-12-25 2:07 ` [PATCH 11/11] git-p4: document and test submit options Pete Wyckoff
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
Make sure it leaves the path, below //depot, in git.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/t9806-git-p4-options.sh | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
index cc0fd26..6b288ac 100755
--- a/t/t9806-git-p4-options.sh
+++ b/t/t9806-git-p4-options.sh
@@ -93,6 +93,30 @@ test_expect_success 'clone --max-changes' '
)
'
+test_expect_success 'clone --keep-path' '
+ (
+ cd "$cli" &&
+ mkdir -p sub/dir &&
+ echo f4 >sub/dir/f4 &&
+ p4 add sub/dir/f4 &&
+ p4 submit -d "change 4"
+ ) &&
+ "$GITP4" clone --dest="$git" --keep-path //depot/sub/dir@all &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ test_path_is_missing f4 &&
+ test_path_is_file sub/dir/f4
+ ) &&
+ cleanup_git &&
+ "$GITP4" clone --dest="$git" //depot/sub/dir@all &&
+ (
+ cd "$git" &&
+ test_path_is_file f4 &&
+ test_path_is_missing sub/dir/f4
+ )
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 10/11] git-p4: test and document --use-client-spec
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
` (8 preceding siblings ...)
2011-12-25 2:07 ` [PATCH 09/11] git-p4: test --keep-path Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
2011-12-25 2:07 ` [PATCH 11/11] git-p4: document and test submit options Pete Wyckoff
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
The depot path is required, even with this option. Make sure
git-p4 fails and exits with non-zero.
Contents in the specified depot path will be rearranged according
to the client spec. Test this and add a note in the docs.
Leave an XXX suggesting that this is somewhat confusing behavior
that might be good to fix later.
Function stripRepoPath() looks at self.useClientSpec. Make sure
this is set both for command-line option --use-client-spec and
for configuration variable git-p4.useClientSpec. Test this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
Documentation/git-p4.txt | 5 +++-
contrib/fast-import/git-p4 | 6 ++++-
t/t9806-git-p4-options.sh | 46 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 55 insertions(+), 2 deletions(-)
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
index 2885b82..3092571 100644
--- a/Documentation/git-p4.txt
+++ b/Documentation/git-p4.txt
@@ -232,7 +232,10 @@ git repository:
Use a client spec to find the list of interesting files in p4.
The client spec is discovered using 'p4 client -o' which checks
the 'P4CLIENT' environment variable and returns a mapping of
- depot files to workspace files.
+ depot files to workspace files. Note that a depot path is
+ still required, but files found in the path that match in
+ the client spec view will be laid out according to the client
+ spec.
Clone options
~~~~~~~~~~~~~
diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4
index d0a9b0d..5420bf1 100755
--- a/contrib/fast-import/git-p4
+++ b/contrib/fast-import/git-p4
@@ -1951,7 +1951,10 @@ class P4Sync(Command, P4UserMap):
if not gitBranchExists(self.refPrefix + "HEAD") and self.importIntoRemotes and gitBranchExists(self.branch):
system("git symbolic-ref %sHEAD %s" % (self.refPrefix, self.branch))
- if self.useClientSpec or gitConfig("git-p4.useclientspec") == "true":
+ if not self.useClientSpec:
+ if gitConfig("git-p4.useclientspec", "--bool") == "true":
+ self.useClientSpec = True
+ if self.useClientSpec:
self.getClientSpec()
# TODO: should always look at previous commits,
@@ -2380,6 +2383,7 @@ def main():
if not cmd.run(args):
parser.print_help()
+ sys.exit(2)
if __name__ == '__main__':
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
index 6b288ac..1f1952a 100755
--- a/t/t9806-git-p4-options.sh
+++ b/t/t9806-git-p4-options.sh
@@ -117,6 +117,52 @@ test_expect_success 'clone --keep-path' '
)
'
+# clone --use-client-spec must still specify a depot path
+# if given, it should rearrange files according to client spec
+# when it has view lines that match the depot path
+# XXX: should clone/sync just use the client spec exactly, rather
+# than needing depot paths?
+test_expect_success 'clone --use-client-spec' '
+ (
+ # big usage message
+ exec >/dev/null &&
+ test_must_fail "$GITP4" clone --dest="$git" --use-client-spec
+ ) &&
+ cli2="$TRASH_DIRECTORY/cli2" &&
+ mkdir -p "$cli2" &&
+ test_when_finished "rmdir \"$cli2\"" &&
+ (
+ cd "$cli2" &&
+ p4 client -i <<-EOF
+ Client: client2
+ Description: client2
+ Root: $cli2
+ View: //depot/sub/... //client2/bus/...
+ EOF
+ ) &&
+ P4CLIENT=client2 &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --dest="$git" --use-client-spec //depot/... &&
+ (
+ cd "$git" &&
+ test_path_is_file bus/dir/f4 &&
+ test_path_is_file file1
+ ) &&
+ cleanup_git &&
+
+ # same thing again, this time with variable instead of option
+ mkdir "$git" &&
+ (
+ cd "$git" &&
+ git init &&
+ git config git-p4.useClientSpec true &&
+ "$GITP4" sync //depot/... &&
+ git checkout -b master p4/master &&
+ test_path_is_file bus/dir/f4 &&
+ test_path_is_file file1
+ )
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 11/11] git-p4: document and test submit options
2011-12-25 2:07 [PATCHv3 00/11] git-p4: asciidoc documentation and fixes Pete Wyckoff
` (9 preceding siblings ...)
2011-12-25 2:07 ` [PATCH 10/11] git-p4: test and document --use-client-spec Pete Wyckoff
@ 2011-12-25 2:07 ` Pete Wyckoff
10 siblings, 0 replies; 12+ messages in thread
From: Pete Wyckoff @ 2011-12-25 2:07 UTC (permalink / raw)
To: git
Clarify there is a -M option, but no -C. These are both
configurable through variables.
Explain that the allowSubmit variable takes a comma-separated
list of branch names.
Catch earlier an invalid branch name given as an argument to
"git p4 clone".
Test option --origin, variable allowSubmit, and explicit master
branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
Documentation/git-p4.txt | 8 +++++-
contrib/fast-import/git-p4 | 7 +++++
t/t9807-git-p4-submit.sh | 54 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 67 insertions(+), 2 deletions(-)
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
index 3092571..f97b1c5 100644
--- a/Documentation/git-p4.txt
+++ b/Documentation/git-p4.txt
@@ -267,7 +267,9 @@ These options can be used to modify 'git p4 submit' behavior.
-M[<n>]::
Detect renames. See linkgit:git-diff[1]. Renames will be
- represented in p4 using explicit 'move' operations.
+ represented in p4 using explicit 'move' operations. There
+ is no corresponding option to detect copies, but there are
+ variables for both moves and copies.
--preserve-user::
Re-author p4 changes before submitting to p4. This option
@@ -453,7 +455,9 @@ git-p4.skipSubmitEditCheck::
git-p4.allowSubmit::
By default, any branch can be used as the source for a 'git p4
submit' operation. This configuration variable, if set, permits only
- the named branches to be used as submit sources.
+ the named branches to be used as submit sources. Branch names
+ must be the short names (no "refs/heads/"), and should be
+ separated by commas (","), with no spaces.
git-p4.skipUserNameCheck::
If the user running 'git p4 submit' does not exist in the p4
diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4
index 5420bf1..d3c3ad8 100755
--- a/contrib/fast-import/git-p4
+++ b/contrib/fast-import/git-p4
@@ -362,6 +362,11 @@ def isValidGitDir(path):
def parseRevision(ref):
return read_pipe("git rev-parse %s" % ref).strip()
+def branchExists(ref):
+ rev = read_pipe(["git", "rev-parse", "-q", "--verify", ref],
+ ignore_error=True)
+ return len(rev) > 0
+
def extractLogMessageFromGitCommit(commit):
logMessage = ""
@@ -1089,6 +1094,8 @@ class P4Submit(Command, P4UserMap):
die("Detecting current git branch failed!")
elif len(args) == 1:
self.master = args[0]
+ if not branchExists(self.master):
+ die("Branch %s does not exist" % self.master)
else:
return False
diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh
index 2cb724e..b1f61e3 100755
--- a/t/t9807-git-p4-submit.sh
+++ b/t/t9807-git-p4-submit.sh
@@ -31,6 +31,60 @@ test_expect_success 'submit with no client dir' '
)
'
+# make two commits, but tell it to apply only from HEAD^
+test_expect_success 'submit --origin' '
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --dest="$git" //depot &&
+ (
+ cd "$git" &&
+ test_commit "file3" &&
+ test_commit "file4" &&
+ git config git-p4.skipSubmitEdit true &&
+ "$GITP4" submit --origin=HEAD^
+ ) &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ test_path_is_missing "file3.t" &&
+ test_path_is_file "file4.t"
+ )
+'
+
+test_expect_success 'submit with allowSubmit' '
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --dest="$git" //depot &&
+ (
+ cd "$git" &&
+ test_commit "file5" &&
+ git config git-p4.skipSubmitEdit true &&
+ git config git-p4.allowSubmit "nobranch" &&
+ test_must_fail "$GITP4" submit &&
+ git config git-p4.allowSubmit "nobranch,master" &&
+ "$GITP4" submit
+ )
+'
+
+test_expect_success 'submit with master branch name from argv' '
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --dest="$git" //depot &&
+ (
+ cd "$git" &&
+ test_commit "file6" &&
+ git config git-p4.skipSubmitEdit true &&
+ test_must_fail "$GITP4" submit nobranch &&
+ git branch otherbranch &&
+ git reset --hard HEAD^ &&
+ test_commit "file7" &&
+ "$GITP4" submit otherbranch
+ ) &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ test_path_is_file "file6.t" &&
+ test_path_is_missing "file7.t"
+ )
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'
--
1.7.8.534.g03ab.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread