[PATCH 1/2] git-svn.perl: consider all ranges for a given merge, instead of only tip-by-tip

[PATCH 1/2] git-svn.perl: consider all ranges for a given merge, instead of only tip-by-tip

[Steven Walter]

Consider the case where you have trunk, branchA of trunk, and branchB of
branchA.  trunk is merged back into branchB, and then branchB is
reintegrated into trunk.  The merge of branchB into trunk will have
svn:mergeinfo property references to both branchA and branchB.  When
performing the check_cherry_pick check on branchB, it is necessary to
eliminate the merged contents of branchA as well as branchB, or else the
merge will be incorrectly ignored as a cherry-pick.

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
---
 git-svn.perl                                    |    8 ++-
 t/t9163-git-svn-fetch-merge-branch-of-branch.sh |   60 +++++++++++++++++++++++
 2 files changed, 63 insertions(+), 5 deletions(-)
 create mode 100755 t/t9163-git-svn-fetch-merge-branch-of-branch.sh

diff --git a/git-svn.perl b/git-svn.perl
index ca038ec..abcec11 100755
--- a/git-svn.perl
+++ b/git-svn.perl
@@ -3657,14 +3657,14 @@ sub find_extra_svn_parents {
 	my @merge_tips;
 	my $url = $self->{url};
 	my $uuid = $self->ra_uuid;
-	my %ranges;
+	my @all_ranges;
 	for my $merge ( @merges ) {
 		my ($tip_commit, @ranges) =
 			lookup_svn_merge( $uuid, $url, $merge );
 		unless (!$tip_commit or
 				grep { $_ eq $tip_commit } @$parents ) {
 			push @merge_tips, $tip_commit;
-			$ranges{$tip_commit} = \@ranges;
+			push @all_ranges, @ranges;
 		} else {
 			push @merge_tips, undef;
 		}
@@ -3679,8 +3679,6 @@ sub find_extra_svn_parents {
 		my $spec = shift @merges;
 		next unless $merge_tip and $excluded{$merge_tip};
 
-		my $ranges = $ranges{$merge_tip};
-
 		# check out 'new' tips
 		my $merge_base;
 		eval {
@@ -3702,7 +3700,7 @@ sub find_extra_svn_parents {
 		my (@incomplete) = check_cherry_pick(
 			$merge_base, $merge_tip,
 			$parents,
-			@$ranges,
+			@all_ranges,
 		       );
 
 		if ( @incomplete ) {
diff --git a/t/t9163-git-svn-fetch-merge-branch-of-branch.sh b/t/t9163-git-svn-fetch-merge-branch-of-branch.sh
new file mode 100755
index 0000000..58c7c56
--- /dev/null
+++ b/t/t9163-git-svn-fetch-merge-branch-of-branch.sh
@@ -0,0 +1,60 @@
+#!/bin/sh
+#
+# Copyright (c) 2010 Steven Walter
+#
+
+test_description='git svn merge detection'
+. ./lib-git-svn.sh
+
+svn_ver="$(svn --version --quiet)"
+case $svn_ver in
+0.* | 1.[0-4].*)
+	skip_all="skipping git-svn test - SVN too old ($svn_ver)"
+	test_done
+	;;
+esac
+
+test_expect_success 'initialize source svn repo' '
+	svn_cmd mkdir -m x "$svnrepo"/trunk &&
+	svn_cmd mkdir -m x "$svnrepo"/branches &&
+	svn_cmd co "$svnrepo"/trunk "$SVN_TREE" &&
+	(
+		cd "$SVN_TREE" &&
+		touch foo &&
+		svn add foo &&
+		svn commit -m "initial commit" &&
+		svn cp -m branch "$svnrepo"/trunk "$svnrepo"/branches/branch1 &&
+		svn switch "$svnrepo"/branches/branch1 &&
+		touch bar &&
+		svn add bar &&
+		svn commit -m branch1 &&
+		svn cp -m branch "$svnrepo"/branches/branch1 "$svnrepo"/branches/branch2 &&
+		svn switch "$svnrepo"/branches/branch2 &&
+		touch baz &&
+		svn add baz &&
+		svn commit -m branch2 &&
+		svn switch "$svnrepo"/trunk &&
+		touch bar2 &&
+		svn add bar2 &&
+		svn commit -m trunk &&
+		svn switch "$svnrepo"/branches/branch2 &&
+		svn merge "$svnrepo"/trunk &&
+		svn commit -m "merge trunk"
+		svn switch "$svnrepo"/trunk &&
+		svn merge --reintegrate "$svnrepo"/branches/branch2 &&
+		svn commit -m "merge branch2"
+	) &&
+	rm -rf "$SVN_TREE"
+'
+
+test_expect_success 'clone svn repo' '
+	git svn init -s "$svnrepo" &&
+	git svn fetch
+'
+
+test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) &&
+	y=$(git rev-parse branch2) &&
+	[ $x == $y ]
+'
+
+test_done
-- 
1.7.9.5

[PATCH 2/2] git-svn.perl: keep processing all commits in parents_exclude

[Steven Walter]

This fixes a bug where git finds the incorrect merge parent.  Consider a
repository with trunk, branch1 of trunk, and branch2 of branch1.
Without this change, git interprets a merge of branch2 into trunk as a
merge of branch1 into trunk.

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
---
 git-svn.perl                                     |    1 -
 t/t9164-git-svn-fetch-merge-branch-of-branch2.sh |   53 ++++++++++++++++++++++
 2 files changed, 53 insertions(+), 1 deletion(-)
 create mode 100755 t/t9164-git-svn-fetch-merge-branch-of-branch2.sh

diff --git a/git-svn.perl b/git-svn.perl
index abcec11..c4678c1 100755
--- a/git-svn.perl
+++ b/git-svn.perl
@@ -3623,7 +3623,6 @@ sub parents_exclude {
 				if ( $commit eq $excluded ) {
 					push @excluded, $commit;
 					$found++;
-					last;
 				}
 				else {
 					push @new, $commit;
diff --git a/t/t9164-git-svn-fetch-merge-branch-of-branch2.sh b/t/t9164-git-svn-fetch-merge-branch-of-branch2.sh
new file mode 100755
index 0000000..fb48882
--- /dev/null
+++ b/t/t9164-git-svn-fetch-merge-branch-of-branch2.sh
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# Copyright (c) 2010 Steven Walter
+#
+
+test_description='git svn merge detection'
+. ./lib-git-svn.sh
+
+svn_ver="$(svn --version --quiet)"
+case $svn_ver in
+0.* | 1.[0-4].*)
+	skip_all="skipping git-svn test - SVN too old ($svn_ver)"
+	test_done
+	;;
+esac
+
+test_expect_success 'initialize source svn repo' '
+	svn_cmd mkdir -m x "$svnrepo"/trunk &&
+	svn_cmd mkdir -m x "$svnrepo"/branches &&
+	svn_cmd co "$svnrepo"/trunk "$SVN_TREE" &&
+	(
+		cd "$SVN_TREE" &&
+		touch foo &&
+		svn add foo &&
+		svn commit -m "initial commit" &&
+		svn cp -m branch "$svnrepo"/trunk "$svnrepo"/branches/branch1 &&
+		svn switch "$svnrepo"/branches/branch1 &&
+		touch bar &&
+		svn add bar &&
+		svn commit -m branch1 &&
+		svn cp -m branch "$svnrepo"/branches/branch1 "$svnrepo"/branches/branch2 &&
+		svn switch "$svnrepo"/branches/branch2 &&
+		touch baz &&
+		svn add baz &&
+		svn commit -m branch2 &&
+		svn switch "$svnrepo"/trunk &&
+		svn merge --reintegrate "$svnrepo"/branches/branch2 &&
+		svn commit -m "merge branch2"
+	) &&
+	rm -rf "$SVN_TREE"
+'
+
+test_expect_success 'clone svn repo' '
+	git svn init -s "$svnrepo" &&
+	git svn fetch
+'
+
+test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) &&
+	y=$(git rev-parse branch2) &&
+	[ $x == $y ]
+'
+
+test_done
-- 
1.7.9.5

Re: [PATCH 1/2] git-svn.perl: consider all ranges for a given merge, instead of only tip-by-tip

[Eric Wong]

Steven Walter <stevenrwalter@gmail.com> wrote:

I'll wait for input on others who understand mergeinfo better than
I do to chime in on the actual changes.  Some nits on the tests:

> +# Copyright (c) 2010 Steven Walter

2010?

> +test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) &&
> +	y=$(git rev-parse branch2) &&
> +	[ $x == $y ]

== is a bash-ism, and we prefer 'test'.  A single '=' works fine here,
but it's probably better to prefix and quote if you're paranoid:

	test "x$x" = "x$y"

Re: [PATCH v3 2/2] git-svn.perl: keep processing all commits in parents_exclude

[Eric Wong]

Steven Walter <stevenrwalter@gmail.com> wrote:
> On Sat, Aug 18, 2012 at 3:51 PM, Sam Vilain <sam@vilain.net> wrote:
> > On 08/11/2012 10:14 AM, Steven Walter wrote:
> >> ---
> >>   git-svn.perl                                     |    1 -
> >>   t/t9164-git-svn-fetch-merge-branch-of-branch2.sh |   53
> >> ++++++++++++++++++++++

Thanks all.

Steven: This doesn't apply cleanly to master since git-svn.perl is
split into separate files (git-svn.perl -> perl/Git/SVN*)

Can you rebase against Junio's current master?  Thanks again.

[PATCH 1/2] git-svn.perl: consider all ranges for a given merge, instead of only tip-by-tip

[Steven Walter]

Consider the case where you have trunk, branch1 of trunk, and branch2 of
branch1.  trunk is merged back into branch2, and then branch2 is
reintegrated into trunk.  The merge of branch2 into trunk will have
svn:mergeinfo property references to both branch1 and branch2.  When
git-svn fetches the commit that merges branch2 (check_cherry_pick),
it is necessary to eliminate the merged contents of branch1 as well as
branch2, or else the merge will be incorrectly ignored as a cherry-pick.

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
---
 perl/Git/SVN.pm                                 |    8 ++-
 t/t9165-git-svn-fetch-merge-branch-of-branch.sh |   60 +++++++++++++++++++++++
 2 files changed, 63 insertions(+), 5 deletions(-)
 create mode 100755 t/t9165-git-svn-fetch-merge-branch-of-branch.sh

diff --git a/perl/Git/SVN.pm b/perl/Git/SVN.pm
index 8478d0c..2707003 100644
--- a/perl/Git/SVN.pm
+++ b/perl/Git/SVN.pm
@@ -1695,14 +1695,14 @@ sub find_extra_svn_parents {
 	my @merge_tips;
 	my $url = $self->{url};
 	my $uuid = $self->ra_uuid;
-	my %ranges;
+	my @all_ranges;
 	for my $merge ( @merges ) {
 		my ($tip_commit, @ranges) =
 			lookup_svn_merge( $uuid, $url, $merge );
 		unless (!$tip_commit or
 				grep { $_ eq $tip_commit } @$parents ) {
 			push @merge_tips, $tip_commit;
-			$ranges{$tip_commit} = \@ranges;
+			push @all_ranges, @ranges;
 		} else {
 			push @merge_tips, undef;
 		}
@@ -1717,8 +1717,6 @@ sub find_extra_svn_parents {
 		my $spec = shift @merges;
 		next unless $merge_tip and $excluded{$merge_tip};
 
-		my $ranges = $ranges{$merge_tip};
-
 		# check out 'new' tips
 		my $merge_base;
 		eval {
@@ -1740,7 +1738,7 @@ sub find_extra_svn_parents {
 		my (@incomplete) = check_cherry_pick(
 			$merge_base, $merge_tip,
 			$parents,
-			@$ranges,
+			@all_ranges,
 		       );
 
 		if ( @incomplete ) {
diff --git a/t/t9165-git-svn-fetch-merge-branch-of-branch.sh b/t/t9165-git-svn-fetch-merge-branch-of-branch.sh
new file mode 100755
index 0000000..13ae7e3
--- /dev/null
+++ b/t/t9165-git-svn-fetch-merge-branch-of-branch.sh
@@ -0,0 +1,60 @@
+#!/bin/sh
+#
+# Copyright (c) 2012 Steven Walter
+#
+
+test_description='git svn merge detection'
+. ./lib-git-svn.sh
+
+svn_ver="$(svn --version --quiet)"
+case $svn_ver in
+0.* | 1.[0-4].*)
+	skip_all="skipping git-svn test - SVN too old ($svn_ver)"
+	test_done
+	;;
+esac
+
+test_expect_success 'initialize source svn repo' '
+	svn_cmd mkdir -m x "$svnrepo"/trunk &&
+	svn_cmd mkdir -m x "$svnrepo"/branches &&
+	svn_cmd co "$svnrepo"/trunk "$SVN_TREE" &&
+	(
+		cd "$SVN_TREE" &&
+		touch foo &&
+		svn_cmd add foo &&
+		svn_cmd commit -m "initial commit" &&
+		svn_cmd cp -m branch "$svnrepo"/trunk "$svnrepo"/branches/branch1 &&
+		svn_cmd switch "$svnrepo"/branches/branch1 &&
+		touch bar &&
+		svn_cmd add bar &&
+		svn_cmd commit -m branch1 &&
+		svn_cmd cp -m branch "$svnrepo"/branches/branch1 "$svnrepo"/branches/branch2 &&
+		svn_cmd switch "$svnrepo"/branches/branch2 &&
+		touch baz &&
+		svn_cmd add baz &&
+		svn_cmd commit -m branch2 &&
+		svn_cmd switch "$svnrepo"/trunk &&
+		touch bar2 &&
+		svn_cmd add bar2 &&
+		svn_cmd commit -m trunk &&
+		svn_cmd switch "$svnrepo"/branches/branch2 &&
+		svn_cmd merge "$svnrepo"/trunk &&
+		svn_cmd commit -m "merge trunk"
+		svn_cmd switch "$svnrepo"/trunk &&
+		svn_cmd merge --reintegrate "$svnrepo"/branches/branch2 &&
+		svn_cmd commit -m "merge branch2"
+	) &&
+	rm -rf "$SVN_TREE"
+'
+
+test_expect_success 'clone svn repo' '
+	git svn init -s "$svnrepo" &&
+	git svn fetch
+'
+
+test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) &&
+	y=$(git rev-parse branch2) &&
+	test "x$x" = "x$y"
+'
+
+test_done
-- 
1.7.9.5

[PATCH 2/2] git-svn.perl: keep processing all commits in parents_exclude

[Steven Walter]

This fixes a bug where git finds the incorrect merge parent.  Consider a
repository with trunk, branch1 of trunk, and branch2 of branch1.
Without this change, git interprets a merge of branch2 into trunk as a
merge of branch1 into trunk.

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
---
 perl/Git/SVN.pm                                  |    1 -
 t/t9166-git-svn-fetch-merge-branch-of-branch2.sh |   53 ++++++++++++++++++++++
 2 files changed, 53 insertions(+), 1 deletion(-)
 create mode 100755 t/t9166-git-svn-fetch-merge-branch-of-branch2.sh

diff --git a/perl/Git/SVN.pm b/perl/Git/SVN.pm
index 2707003..e48ba46 100644
--- a/perl/Git/SVN.pm
+++ b/perl/Git/SVN.pm
@@ -1661,7 +1661,6 @@ sub parents_exclude {
 				if ( $commit eq $excluded ) {
 					push @excluded, $commit;
 					$found++;
-					last;
 				}
 				else {
 					push @new, $commit;
diff --git a/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh b/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh
new file mode 100755
index 0000000..af0ec0e
--- /dev/null
+++ b/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# Copyright (c) 2012 Steven Walter
+#
+
+test_description='git svn merge detection'
+. ./lib-git-svn.sh
+
+svn_ver="$(svn --version --quiet)"
+case $svn_ver in
+0.* | 1.[0-4].*)
+	skip_all="skipping git-svn test - SVN too old ($svn_ver)"
+	test_done
+	;;
+esac
+
+test_expect_success 'initialize source svn repo' '
+	svn_cmd mkdir -m x "$svnrepo"/trunk &&
+	svn_cmd mkdir -m x "$svnrepo"/branches &&
+	svn_cmd co "$svnrepo"/trunk "$SVN_TREE" &&
+	(
+		cd "$SVN_TREE" &&
+		touch foo &&
+		svn_cmd add foo &&
+		svn_cmd commit -m "initial commit" &&
+		svn_cmd cp -m branch "$svnrepo"/trunk "$svnrepo"/branches/branch1 &&
+		svn_cmd switch "$svnrepo"/branches/branch1 &&
+		touch bar &&
+		svn_cmd add bar &&
+		svn_cmd commit -m branch1 &&
+		svn_cmd cp -m branch "$svnrepo"/branches/branch1 "$svnrepo"/branches/branch2 &&
+		svn_cmd switch "$svnrepo"/branches/branch2 &&
+		touch baz &&
+		svn_cmd add baz &&
+		svn_cmd commit -m branch2 &&
+		svn_cmd switch "$svnrepo"/trunk &&
+		svn_cmd merge --reintegrate "$svnrepo"/branches/branch2 &&
+		svn_cmd commit -m "merge branch2"
+	) &&
+	rm -rf "$SVN_TREE"
+'
+
+test_expect_success 'clone svn repo' '
+	git svn init -s "$svnrepo" &&
+	git svn fetch
+'
+
+test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) &&
+	y=$(git rev-parse branch2) &&
+	test "x$x" = "x$y"
+'
+
+test_done
-- 
1.7.9.5