git.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Nguyễn Thái Ngọc Duy" <pclouds@gmail.com>
To: git@vger.kernel.org
Cc: "Junio C Hamano" <gitster@pobox.com>,
	"Nguyễn Thái Ngọc Duy" <pclouds@gmail.com>
Subject: [PATCH v1 23/45] check-ignore: convert to use parse_pathspec
Date: Fri, 15 Mar 2013 13:06:38 +0700	[thread overview]
Message-ID: <1363327620-29017-24-git-send-email-pclouds@gmail.com> (raw)
In-Reply-To: <1363327620-29017-1-git-send-email-pclouds@gmail.com>

check-ignore (at least the test suite) seems to rely on the pattern
order. PATHSPEC_KEEP_ORDER is introduced to explictly express this.
The lack of PATHSPEC_MAXDEPTH_VALID is sufficient because it's the
only flag that reorders pathspecs, but it's less obvious that way.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
---
 builtin/check-ignore.c | 34 +++++++++++++++++++++-------------
 pathspec.c             |  6 +++++-
 pathspec.h             |  1 +
 t/t0008-ignores.sh     |  8 ++++----
 4 files changed, 31 insertions(+), 18 deletions(-)

diff --git a/builtin/check-ignore.c b/builtin/check-ignore.c
index 0240f99..6e55f06 100644
--- a/builtin/check-ignore.c
+++ b/builtin/check-ignore.c
@@ -53,14 +53,14 @@ static void output_exclude(const char *path, struct exclude *exclude)
 	}
 }
 
-static int check_ignore(const char *prefix, const char **pathspec)
+static int check_ignore(int argc, const char **argv, const char *prefix)
 {
 	struct dir_struct dir;
-	const char *path, *full_path;
 	char *seen;
 	int num_ignored = 0, dtype = DT_UNKNOWN, i;
 	struct path_exclude_check check;
 	struct exclude *exclude;
+	struct pathspec pathspec;
 
 	/* read_cache() is only necessary so we can watch out for submodules. */
 	if (read_cache() < 0)
@@ -70,31 +70,39 @@ static int check_ignore(const char *prefix, const char **pathspec)
 	dir.flags |= DIR_COLLECT_IGNORED;
 	setup_standard_excludes(&dir);
 
-	if (!pathspec || !*pathspec) {
+	if (!argc) {
 		if (!quiet)
 			fprintf(stderr, "no pathspec given.\n");
 		return 0;
 	}
 
+	/*
+	 * check-ignore just needs paths. Magic beyond :/ is really
+	 * irrelevant.
+	 */
+	parse_pathspec(&pathspec,
+		       PATHSPEC_ALL_MAGIC & ~PATHSPEC_FROMTOP,
+		       PATHSPEC_SYMLINK_LEADING_PATH |
+		       PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE |
+		       PATHSPEC_KEEP_ORDER,
+		       prefix, argv);
+
 	path_exclude_check_init(&check, &dir);
 	/*
 	 * look for pathspecs matching entries in the index, since these
 	 * should not be ignored, in order to be consistent with
 	 * 'git status', 'git add' etc.
 	 */
-	seen = find_pathspecs_matching_against_index(pathspec);
-	for (i = 0; pathspec[i]; i++) {
-		path = pathspec[i];
-		full_path = prefix_path(prefix, prefix
-					? strlen(prefix) : 0, path);
-		full_path = check_path_for_gitlink(full_path);
-		die_if_path_beyond_symlink(full_path, prefix);
+	seen = find_pathspecs_matching_against_index(pathspec.raw);
+	for (i = 0; i < pathspec.nr; i++) {
+		const char *full_path = pathspec.raw[i];
 		if (!seen[i]) {
 			exclude = last_exclude_matching_path(&check, full_path,
 							     -1, &dtype);
 			if (exclude) {
 				if (!quiet)
-					output_exclude(path, exclude);
+					output_exclude(pathspec.items[i].original,
+						       exclude);
 				num_ignored++;
 			}
 		}
@@ -129,7 +137,7 @@ static int check_ignore_stdin_paths(const char *prefix)
 	}
 	ALLOC_GROW(pathspec, nr + 1, alloc);
 	pathspec[nr] = NULL;
-	num_ignored = check_ignore(prefix, (const char **)pathspec);
+	num_ignored = check_ignore(nr, (const char **)pathspec, prefix);
 	maybe_flush_or_die(stdout, "attribute to stdout");
 	strbuf_release(&buf);
 	strbuf_release(&nbuf);
@@ -165,7 +173,7 @@ int cmd_check_ignore(int argc, const char **argv, const char *prefix)
 	if (stdin_paths) {
 		num_ignored = check_ignore_stdin_paths(prefix);
 	} else {
-		num_ignored = check_ignore(prefix, argv);
+		num_ignored = check_ignore(argc, argv, prefix);
 		maybe_flush_or_die(stdout, "ignore to stdout");
 	}
 
diff --git a/pathspec.c b/pathspec.c
index 9a57c0c..f531038 100644
--- a/pathspec.c
+++ b/pathspec.c
@@ -368,9 +368,13 @@ void parse_pathspec(struct pathspec *pathspec,
 		pathspec->magic |= item[i].magic;
 	}
 
-	if (pathspec->magic & PATHSPEC_MAXDEPTH)
+
+	if (pathspec->magic & PATHSPEC_MAXDEPTH) {
+		if (flags & PATHSPEC_KEEP_ORDER)
+			die("BUG: PATHSPEC_MAXDEPTH_VALID and PATHSPEC_KEEP_ORDER are incompatible");
 		qsort(pathspec->items, pathspec->nr,
 		      sizeof(struct pathspec_item), pathspec_item_cmp);
+	}
 }
 
 /*
diff --git a/pathspec.h b/pathspec.h
index ed5d3a6..44253c8 100644
--- a/pathspec.h
+++ b/pathspec.h
@@ -42,6 +42,7 @@ struct pathspec {
 #define PATHSPEC_SYMLINK_LEADING_PATH (1<<4)
 #define PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE (1<<5)
 #define PATHSPEC_PREFIX_ORIGIN (1<<6)
+#define PATHSPEC_KEEP_ORDER (1<<7)
 
 extern int init_pathspec(struct pathspec *, const char **);
 extern void parse_pathspec(struct pathspec *pathspec,
diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh
index 9c1bde1..c41f60b 100755
--- a/t/t0008-ignores.sh
+++ b/t/t0008-ignores.sh
@@ -397,7 +397,7 @@ test_expect_success_multi SYMLINKS 'symlink' '' '
 
 test_expect_success_multi SYMLINKS 'beyond a symlink' '' '
 	test_check_ignore "a/symlink/foo" 128 &&
-	test_stderr "fatal: '\''a/symlink/foo'\'' is beyond a symbolic link"
+	test_stderr "fatal: pathspec '\''a/symlink/foo'\'' is beyond a symbolic link"
 '
 
 test_expect_success_multi SYMLINKS 'beyond a symlink from subdirectory' '' '
@@ -405,7 +405,7 @@ test_expect_success_multi SYMLINKS 'beyond a symlink from subdirectory' '' '
 		cd a &&
 		test_check_ignore "symlink/foo" 128
 	) &&
-	test_stderr "fatal: '\''symlink/foo'\'' is beyond a symbolic link"
+	test_stderr "fatal: pathspec '\''symlink/foo'\'' is beyond a symbolic link"
 '
 
 ############################################################################
@@ -414,7 +414,7 @@ test_expect_success_multi SYMLINKS 'beyond a symlink from subdirectory' '' '
 
 test_expect_success_multi 'submodule' '' '
 	test_check_ignore "a/submodule/one" 128 &&
-	test_stderr "fatal: Path '\''a/submodule/one'\'' is in submodule '\''a/submodule'\''"
+	test_stderr "fatal: Pathspec '\''a/submodule/one'\'' is in submodule '\''a/submodule'\''"
 '
 
 test_expect_success_multi 'submodule from subdirectory' '' '
@@ -422,7 +422,7 @@ test_expect_success_multi 'submodule from subdirectory' '' '
 		cd a &&
 		test_check_ignore "submodule/one" 128
 	) &&
-	test_stderr "fatal: Path '\''a/submodule/one'\'' is in submodule '\''a/submodule'\''"
+	test_stderr "fatal: Pathspec '\''submodule/one'\'' is in submodule '\''a/submodule'\''"
 '
 
 ############################################################################
-- 
1.8.0.rc0.19.g7bbb31d

  parent reply	other threads:[~2013-03-15  6:27 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-15  6:06 [PATCH v1 00/45] nd/parse-pathspec and :(glob) pathspec magic Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 01/45] setup.c: check that the pathspec magic ends with ")" Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 02/45] clean: remove unused variable "seen" Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 03/45] Move struct pathspec and related functions to pathspec.[ch] Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 04/45] pathspec: i18n-ize error strings in pathspec parsing code Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 05/45] pathspec: add copy_pathspec Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 06/45] Add parse_pathspec() that converts cmdline args to struct pathspec Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 07/45] parse_pathspec: save original pathspec for reporting Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 08/45] parse_pathspec: add PATHSPEC_PREFER_{CWD,FULL} Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 09/45] Convert some get_pathspec() calls to parse_pathspec() Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 10/45] parse_pathspec: a special flag for max_depth feature Nguyễn Thái Ngọc Duy
2013-03-15 21:28   ` Eric Sunshine
2013-03-15  6:06 ` [PATCH v1 11/45] parse_pathspec: support stripping submodule trailing slashes Nguyễn Thái Ngọc Duy
2013-03-17 21:55   ` Junio C Hamano
2013-03-18  0:53     ` Duy Nguyen
2013-03-15  6:06 ` [PATCH v1 12/45] parse_pathspec: support stripping/checking submodule paths Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 13/45] parse_pathspec: support prefixing original patterns Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 14/45] Guard against new pathspec magic in pathspec matching code Nguyễn Thái Ngọc Duy
2013-03-17 22:00   ` Junio C Hamano
2013-03-15  6:06 ` [PATCH v1 15/45] clean: convert to use parse_pathspec Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 16/45] commit: " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 17/45] status: " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 18/45] rerere: " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 19/45] checkout: " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 20/45] rm: " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 21/45] ls-files: " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 22/45] archive: " Nguyễn Thái Ngọc Duy
2013-03-15 17:56   ` Junio C Hamano
2013-03-16  1:08     ` Duy Nguyen
2013-03-17  5:00       ` Junio C Hamano
2013-03-17  5:31         ` Duy Nguyen
2013-03-17  6:22           ` Junio C Hamano
2013-03-15  6:06 ` Nguyễn Thái Ngọc Duy [this message]
2013-04-12 15:03   ` [PATCH v1 23/45] check-ignore: " Adam Spiers
2013-04-12 23:09     ` Duy Nguyen
2013-04-14 23:25       ` Adam Spiers
2013-04-14 23:48         ` Duy Nguyen
2013-04-15 16:17           ` Adam Spiers
2013-03-15  6:06 ` [PATCH v1 24/45] add: " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 25/45] reset: " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 26/45] Convert read_cache_preload() to take struct pathspec Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 27/45] Convert run_add_interactive to use " Nguyễn Thái Ngọc Duy
2013-03-18 18:26   ` John Keeping
2013-03-19  1:58     ` Duy Nguyen
2013-03-19 10:58       ` John Keeping
2013-03-15  6:06 ` [PATCH v1 28/45] Convert unmerge_cache to take " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 29/45] checkout: convert read_tree_some " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 30/45] Convert report_path_error " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 31/45] Convert refresh_index " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 32/45] Convert {read,fill}_directory " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 33/45] Convert add_files_to_cache " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 34/45] Convert common_prefix() to use " Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 35/45] Remove diff_tree_{setup,release}_paths Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 36/45] Remove init_pathspec() in favor of parse_pathspec() Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 37/45] Remove match_pathspec() in favor of match_pathspec_depth() Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 38/45] tree-diff: remove the use of pathspec's raw[] in follow-rename codepath Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 39/45] parse_pathspec: make sure the prefix part is wildcard-free Nguyễn Thái Ngọc Duy
2013-03-19 18:34   ` Junio C Hamano
2013-03-20  1:32     ` Duy Nguyen
2013-03-20 10:54       ` Duy Nguyen
2013-03-15  6:06 ` [PATCH v1 40/45] parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN Nguyễn Thái Ngọc Duy
2013-03-15 22:00   ` Eric Sunshine
2013-03-15  6:06 ` [PATCH v1 41/45] Kill limit_pathspec_to_literal() as it's only used by parse_pathspec() Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 42/45] pathspec: support :(literal) syntax for noglob pathspec Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 43/45] pathspec: make --literal-pathspecs disable pathspec magic Nguyễn Thái Ngọc Duy
2013-03-15  6:06 ` [PATCH v1 44/45] pathspec: support :(glob) syntax Nguyễn Thái Ngọc Duy
2013-03-15 22:11   ` Eric Sunshine
2013-03-15  6:07 ` [PATCH v1 45/45] Rename field "raw" to "_raw" in struct pathspec Nguyễn Thái Ngọc Duy
2013-03-15 17:48 ` [PATCH v1 00/45] nd/parse-pathspec and :(glob) pathspec magic Junio C Hamano
2013-03-20 12:16 ` [PATCH v2 00/45] parse_pathspec and :(glob) magic Nguyễn Thái Ngọc Duy
2013-03-20 12:16   ` [PATCH v2 06/45] Add parse_pathspec() that converts cmdline args to struct pathspec Nguyễn Thái Ngọc Duy
2013-03-20 19:40     ` Eric Sunshine
2013-03-22 21:55     ` Junio C Hamano
2013-03-20 12:16   ` [PATCH v2 11/45] parse_pathspec: support stripping submodule trailing slashes Nguyễn Thái Ngọc Duy
2013-03-20 12:16   ` [PATCH v2 12/45] parse_pathspec: support stripping/checking submodule paths Nguyễn Thái Ngọc Duy
2013-03-20 12:16   ` [PATCH v2 14/45] Guard against new pathspec magic in pathspec matching code Nguyễn Thái Ngọc Duy
2013-03-20 19:45     ` Eric Sunshine
2013-03-20 12:16   ` [PATCH v2 27/45] Convert run_add_interactive to use struct pathspec Nguyễn Thái Ngọc Duy
2013-03-20 12:16   ` [PATCH v2 39/45] parse_pathspec: make sure the prefix part is wildcard-free Nguyễn Thái Ngọc Duy
2013-03-20 18:02   ` [PATCH v2 00/45] parse_pathspec and :(glob) magic Junio C Hamano
2013-03-21  5:33     ` Duy Nguyen
2013-03-21  5:43       ` Duy Nguyen
2013-03-21 17:28         ` Junio C Hamano
2013-03-21 17:50           ` Junio C Hamano
2013-03-23  3:13             ` Duy Nguyen
2013-03-23  3:15               ` Duy Nguyen
2013-03-27 15:39                 ` Junio C Hamano
2013-03-24  0:57               ` Eric Sunshine

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1363327620-29017-24-git-send-email-pclouds@gmail.com \
    --to=pclouds@gmail.com \
    --cc=git@vger.kernel.org \
    --cc=gitster@pobox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).