* [PATCH v3] stash: handle specifying stashes with spaces
@ 2014-01-07 8:22 Øystein Walle
2014-01-07 18:42 ` Junio C Hamano
0 siblings, 1 reply; 6+ messages in thread
From: Øystein Walle @ 2014-01-07 8:22 UTC (permalink / raw)
To: git; +Cc: Thomas Rast, Øystein Walle
When trying to pop/apply a stash specified with an argument containing
spaces git-stash will throw an error:
$ git stash pop 'stash@{two hours ago}'
Too many revisions specified: stash@{two hours ago}
This happens because word splitting is used to count non-option
arguments. Make use of rev-parse's --sq option to quote the arguments
for us to ensure a correct count. Add quotes where necessary.
Also add a test that verifies correct behaviour.
Helped-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Øystein Walle <oystwa@gmail.com>
---
v3 uses the same eval/--sq technique as v2, suggested by Thomas Rast.
This is basically a resend except that I added a missing '&&' in the
test that Eric Sunshine noticed when reading v1.
git-stash.sh | 14 +++++++-------
t/t3903-stash.sh | 11 +++++++++++
2 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/git-stash.sh b/git-stash.sh
index 1e541a2..f0a94ab 100755
--- a/git-stash.sh
+++ b/git-stash.sh
@@ -358,7 +358,7 @@ parse_flags_and_rev()
i_tree=
u_tree=
- REV=$(git rev-parse --no-flags --symbolic "$@") || exit 1
+ REV=$(git rev-parse --no-flags --symbolic --sq "$@") || exit 1
FLAGS=
for opt
@@ -376,7 +376,7 @@ parse_flags_and_rev()
esac
done
- set -- $REV
+ eval set -- $REV
case $# in
0)
@@ -391,13 +391,13 @@ parse_flags_and_rev()
;;
esac
- REV=$(git rev-parse --quiet --symbolic --verify $1 2>/dev/null) || {
+ REV=$(git rev-parse --quiet --symbolic --verify "$1" 2>/dev/null) || {
reference="$1"
die "$(eval_gettext "\$reference is not valid reference")"
}
- i_commit=$(git rev-parse --quiet --verify $REV^2 2>/dev/null) &&
- set -- $(git rev-parse $REV $REV^1 $REV: $REV^1: $REV^2: 2>/dev/null) &&
+ i_commit=$(git rev-parse --quiet --verify "$REV^2" 2>/dev/null) &&
+ set -- $(git rev-parse "$REV" "$REV^1" "$REV:" "$REV^1:" "$REV^2:" 2>/dev/null) &&
s=$1 &&
w_commit=$1 &&
b_commit=$2 &&
@@ -408,8 +408,8 @@ parse_flags_and_rev()
test "$ref_stash" = "$(git rev-parse --symbolic-full-name "${REV%@*}")" &&
IS_STASH_REF=t
- u_commit=$(git rev-parse --quiet --verify $REV^3 2>/dev/null) &&
- u_tree=$(git rev-parse $REV^3: 2>/dev/null)
+ u_commit=$(git rev-parse --quiet --verify "$REV^3" 2>/dev/null) &&
+ u_tree=$(git rev-parse "$REV^3:" 2>/dev/null)
}
is_stash_like()
diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh
index debda7a..7eb011c 100755
--- a/t/t3903-stash.sh
+++ b/t/t3903-stash.sh
@@ -673,4 +673,15 @@ test_expect_success 'store updates stash ref and reflog' '
grep quux bazzy
'
+test_expect_success 'handle stash specification with spaces' '
+ git stash clear &&
+ echo pig > file &&
+ git stash &&
+ test_tick &&
+ echo cow > file &&
+ git stash &&
+ git stash apply "stash@{Thu Apr 7 15:17:13 2005 -0700}" &&
+ grep pig file
+'
+
test_done
--
1.8.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3] stash: handle specifying stashes with spaces
2014-01-07 8:22 [PATCH v3] stash: handle specifying stashes with spaces Øystein Walle
@ 2014-01-07 18:42 ` Junio C Hamano
2014-01-07 22:17 ` Thomas Rast
0 siblings, 1 reply; 6+ messages in thread
From: Junio C Hamano @ 2014-01-07 18:42 UTC (permalink / raw)
To: Øystein Walle; +Cc: git, Thomas Rast
Øystein Walle <oystwa@gmail.com> writes:
> When trying to pop/apply a stash specified with an argument containing
> spaces git-stash will throw an error:
>
> $ git stash pop 'stash@{two hours ago}'
> Too many revisions specified: stash@{two hours ago}
>
> This happens because word splitting is used to count non-option
> arguments. Make use of rev-parse's --sq option to quote the arguments
> for us to ensure a correct count. Add quotes where necessary.
>
> Also add a test that verifies correct behaviour.
>
> Helped-by: Thomas Rast <tr@thomasrast.ch>
> Signed-off-by: Øystein Walle <oystwa@gmail.com>
> ---
> v3 uses the same eval/--sq technique as v2, suggested by Thomas Rast.
> This is basically a resend except that I added a missing '&&' in the
> test that Eric Sunshine noticed when reading v1.
The change looks good.
An unrelated tangent, but here is a tip-of-the-day for the
approximate parser. You could have just said
git stash pop stash@{2.hours}
and it would have been interpreted just the same ;-)
> diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh
> index debda7a..7eb011c 100755
> --- a/t/t3903-stash.sh
> +++ b/t/t3903-stash.sh
> @@ -673,4 +673,15 @@ test_expect_success 'store updates stash ref and reflog' '
> grep quux bazzy
> '
>
> +test_expect_success 'handle stash specification with spaces' '
> + git stash clear &&
> + echo pig > file &&
Style: no SP between redirection operator and its target, i.e.
echo pig >file &&
> + git stash &&
> + test_tick &&
> + echo cow > file &&
> + git stash &&
> + git stash apply "stash@{Thu Apr 7 15:17:13 2005 -0700}" &&
This is brittle. If new tests are added before this, the test_tick
will give you different timestamp and this test will start failing.
Perhaps grab the timestamp out of the stash that was created, e.g.
...
test_tick &&
git stash &&
stamp=$(git log -g --format="%cd" -1 refs/stash) &&
test_tick &&
echo cow >file &&
git stash &&
git stash apply "stash@{$stamp}" &&
or something?
> + grep pig file
> +'
> +
> test_done
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] stash: handle specifying stashes with spaces
2014-01-07 18:42 ` Junio C Hamano
@ 2014-01-07 22:17 ` Thomas Rast
2014-01-07 22:29 ` Junio C Hamano
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Rast @ 2014-01-07 22:17 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Øystein Walle, git
Junio C Hamano <gitster@pobox.com> writes:
> Øystein Walle <oystwa@gmail.com> writes:
>
>> + git stash &&
>> + test_tick &&
>> + echo cow > file &&
>> + git stash &&
>> + git stash apply "stash@{Thu Apr 7 15:17:13 2005 -0700}" &&
>
> This is brittle. If new tests are added before this, the test_tick
> will give you different timestamp and this test will start failing.
>
> Perhaps grab the timestamp out of the stash that was created [...]
Hmm, now that I stare at this, why not simply use something like
git stash apply "stash@{ 0 }"
It seems to refer to the same as stash@{0} as one would expect, while
still triggering the bug with unpatched git-stash.
--
Thomas Rast
tr@thomasrast.ch
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] stash: handle specifying stashes with spaces
2014-01-07 22:17 ` Thomas Rast
@ 2014-01-07 22:29 ` Junio C Hamano
2014-01-08 0:03 ` Øystein Walle
0 siblings, 1 reply; 6+ messages in thread
From: Junio C Hamano @ 2014-01-07 22:29 UTC (permalink / raw)
To: Thomas Rast; +Cc: Øystein Walle, git
Thomas Rast <tr@thomasrast.ch> writes:
> Junio C Hamano <gitster@pobox.com> writes:
>
>> Øystein Walle <oystwa@gmail.com> writes:
>>
>>> + git stash &&
>>> + test_tick &&
>>> + echo cow > file &&
>>> + git stash &&
>>> + git stash apply "stash@{Thu Apr 7 15:17:13 2005 -0700}" &&
>>
>> This is brittle. If new tests are added before this, the test_tick
>> will give you different timestamp and this test will start failing.
>>
>> Perhaps grab the timestamp out of the stash that was created [...]
>
> Hmm, now that I stare at this, why not simply use something like
>
> git stash apply "stash@{ 0 }"
>
> It seems to refer to the same as stash@{0} as one would expect, while
> still triggering the bug with unpatched git-stash.
Yeah, that is fine as well. For the record, here is what I
tentatively queued.
-- >8 --
From: Øystein Walle <oystwa@gmail.com>
Date: Tue, 7 Jan 2014 09:22:15 +0100
Subject: [PATCH] stash: handle specifying stashes with $IFS
When trying to pop/apply a stash specified with an argument
containing IFS whitespace, git-stash will throw an error:
$ git stash pop 'stash@{two hours ago}'
Too many revisions specified: stash@{two hours ago}
This happens because word splitting is used to count non-option
arguments. Make use of rev-parse's --sq option to quote the arguments
for us to ensure a correct count. Add quotes where necessary.
Also add a test that verifies correct behaviour.
Helped-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
git-stash.sh | 14 +++++++-------
t/t3903-stash.sh | 12 ++++++++++++
2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/git-stash.sh b/git-stash.sh
index 1e541a2..f0a94ab 100755
--- a/git-stash.sh
+++ b/git-stash.sh
@@ -358,7 +358,7 @@ parse_flags_and_rev()
i_tree=
u_tree=
- REV=$(git rev-parse --no-flags --symbolic "$@") || exit 1
+ REV=$(git rev-parse --no-flags --symbolic --sq "$@") || exit 1
FLAGS=
for opt
@@ -376,7 +376,7 @@ parse_flags_and_rev()
esac
done
- set -- $REV
+ eval set -- $REV
case $# in
0)
@@ -391,13 +391,13 @@ parse_flags_and_rev()
;;
esac
- REV=$(git rev-parse --quiet --symbolic --verify $1 2>/dev/null) || {
+ REV=$(git rev-parse --quiet --symbolic --verify "$1" 2>/dev/null) || {
reference="$1"
die "$(eval_gettext "\$reference is not valid reference")"
}
- i_commit=$(git rev-parse --quiet --verify $REV^2 2>/dev/null) &&
- set -- $(git rev-parse $REV $REV^1 $REV: $REV^1: $REV^2: 2>/dev/null) &&
+ i_commit=$(git rev-parse --quiet --verify "$REV^2" 2>/dev/null) &&
+ set -- $(git rev-parse "$REV" "$REV^1" "$REV:" "$REV^1:" "$REV^2:" 2>/dev/null) &&
s=$1 &&
w_commit=$1 &&
b_commit=$2 &&
@@ -408,8 +408,8 @@ parse_flags_and_rev()
test "$ref_stash" = "$(git rev-parse --symbolic-full-name "${REV%@*}")" &&
IS_STASH_REF=t
- u_commit=$(git rev-parse --quiet --verify $REV^3 2>/dev/null) &&
- u_tree=$(git rev-parse $REV^3: 2>/dev/null)
+ u_commit=$(git rev-parse --quiet --verify "$REV^3" 2>/dev/null) &&
+ u_tree=$(git rev-parse "$REV^3:" 2>/dev/null)
}
is_stash_like()
diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh
index debda7a..5b79b21 100755
--- a/t/t3903-stash.sh
+++ b/t/t3903-stash.sh
@@ -673,4 +673,16 @@ test_expect_success 'store updates stash ref and reflog' '
grep quux bazzy
'
+test_expect_success 'handle stash specification with spaces' '
+ git stash clear &&
+ echo pig >file &&
+ git stash &&
+ stamp=$(git log -g --format="%cd" -1 refs/stash) &&
+ test_tick &&
+ echo cow >file &&
+ git stash &&
+ git stash apply "stash@{$stamp}" &&
+ grep pig file
+'
+
test_done
--
1.8.5.2-419-g5ca323a
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3] stash: handle specifying stashes with spaces
2014-01-07 22:29 ` Junio C Hamano
@ 2014-01-08 0:03 ` Øystein Walle
2014-01-09 18:42 ` Junio C Hamano
0 siblings, 1 reply; 6+ messages in thread
From: Øystein Walle @ 2014-01-08 0:03 UTC (permalink / raw)
To: git
Junio C Hamano <gitster <at> pobox.com> writes:
>
> Thomas Rast <tr <at> thomasrast.ch> writes:
>
> > Junio C Hamano <gitster <at> pobox.com> writes:
> >
> >>
> >> This is brittle. If new tests are added before this, the test_tick
> >> will give you different timestamp and this test will start failing.
> >>
> >> Perhaps grab the timestamp out of the stash that was created [...]
> >
> > Hmm, now that I stare at this, why not simply use something like
> >
> > git stash apply "stash <at> { 0 }"
> >
> > It seems to refer to the same as stash <at> {0} as one would expect, while
> > still triggering the bug with unpatched git-stash.
>
> Yeah, that is fine as well. For the record, here is what I
> tentatively queued.
>
I completely agree that it's brittle. I mentioned it when I submitted v1
but at the time it didn't occur to me that new tests might be added
before it. And of course I agree with your proposed changes to the test.
I must say I like Thomas' solution because of its simplicity and the
whole test could be made much shorter: just create stash and try to pop
it.
But it's seems the spaces trigger some other way of interpreting the
selector. In my git.git, git rev-parse HEAD{0} gives me the same result
as HEAD@{ 0 } but HEAD@{1} and HEAD@{ 1 } are different. Is this
intentional? If not, can this impact the reliability of the test if we
use HEAD@{ 0 } ?
Thanks for queuing!
Regards,
Øsse
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] stash: handle specifying stashes with spaces
2014-01-08 0:03 ` Øystein Walle
@ 2014-01-09 18:42 ` Junio C Hamano
0 siblings, 0 replies; 6+ messages in thread
From: Junio C Hamano @ 2014-01-09 18:42 UTC (permalink / raw)
To: Øystein Walle; +Cc: git
Øystein Walle <oystwa@gmail.com> writes:
> But it's seems the spaces trigger some other way of interpreting the
> selector. In my git.git, git rev-parse HEAD{0} gives me the same result
> as HEAD@{ 0 } but HEAD@{1} and HEAD@{ 1 } are different.
The integer to specify the nth reflog entry (or nth prior checkout)
are never spelled with any SP stuffing. HEAD@{1} is the prior state,
HEAD@{-1} is the previous branch; HEAD@{ 1 } nor HEAD@{ -1 } do not
mean these things.
Any string inside @{...} that is _not_ a valid nth reflog entry
specifier is interpreted as a human-readable timestamp via the
approxidate logic (and used only when it makes sense). " 1" happens
to mean "the first day of the month".
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-01-09 18:42 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-07 8:22 [PATCH v3] stash: handle specifying stashes with spaces Øystein Walle
2014-01-07 18:42 ` Junio C Hamano
2014-01-07 22:17 ` Thomas Rast
2014-01-07 22:29 ` Junio C Hamano
2014-01-08 0:03 ` Øystein Walle
2014-01-09 18:42 ` Junio C Hamano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).