[PATCH v4] tests: use "env" to run commands with temporary env-var settings

git.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH v4] tests: use "env" to run commands with temporary env-var settings
@ 2014-03-20 10:51 David Tran
  2014-03-20 19:25 ` Junio C Hamano
  0 siblings, 1 reply; 2+ messages in thread
From: David Tran @ 2014-03-20 10:51 UTC (permalink / raw)
  To: git; +Cc: David Tran

Ordinarily, we would say "VAR=VAL command" to execute a tested command with
environment variable(s) set only for that command. This however does not work
if 'command' is a shell function (most notably 'test_must_fail'); the result
of the assignment is retained and affects later commands.

To avoid this, we assigned and exported the environment variables and run such
test(s) in a subshell like this,

	(
		VAR=VAL &&
		export VAR &&
		test_must_fail git command to be tested
	)

Using the "env" utility, we should be able to say

	test_must_fail git command to be tested

which is much shorter and easier to read.

Signed-off-by: David Tran <unsignedzero@gmail.com>

---

Revision update: v1[1] and v2[2] fixed broken &&-chains and removed subshells
that are no longer needed. v3[3] fixed typos and mistakes in the commit
message itself.

>>>Let's see if I replied correctly with send-email. Retrying this again.
>>>How do I 'reply' to a thread using send-email?
>>Look for --in-reply-to option in "man git-send-email".
>Git prompts me for this but I don't know what to type. I tried typing just
>the id, like 244379 and that didn't work. I guess I'll try
>244379 <at> gmane.comp.version-control.git? Google didn't bring many results on
>how to use it but many results of what it is and its goal.
I see 'Followup' on the upper right. Should do the right job.

>Much better. I didn't spot any errors in the patch this time around.
Good.

>One final note for future submissions: As a courtesy to reviewers,
>explain (below the "---" line) what changed in the current version,
>and provide a reference to the previous attempt, like this [1].
Added above.

>Looks familiar ;-) but it seems the changes from the original you
>took it from all look worsening, not improvements, to me.
I learn more from rewriting than copying and pasting but I'll change most of it
back then.

>Seems to be well done.  Thanks.
You're welcome.

I am David Tran a graduating CS/Math senior from Sonoma State University,
United States. I would like to work with git for GSoC'14, specifically the line
options for git rebase --interactive [4][5]. I have used git for a few years and
know how destructive but important rebase is to git. I have created a few shell
scripts here and there to make life using bash/zsh easier. I would like to
apply these skills and work with the best.

Github: unsignedzero

[1]: http://thread.gmane.org/gmane.comp.version-control.git/244256
[2]: http://thread.gmane.org/gmane.comp.version-control.git/244379
[3]: http://thread.gmane.org/gmane.comp.version-control.git/244406

[4]: http://thread.gmane.org/gmane.comp.version-control.git/243933/focus=243967
[5]: http://thread.gmane.org/gmane.comp.version-control.git/242701

Signed-off-by: David Tran <unsignedzero@gmail.com>
---
 t/t1300-repo-config.sh        |   17 ++--------
 t/t1510-repo-setup.sh         |    4 +--
 t/t3200-branch.sh             |   12 +------
 t/t3301-notes.sh              |   22 +++---------
 t/t3404-rebase-interactive.sh |   69 ++++++++---------------------------------
 t/t3413-rebase-hook.sh        |    6 +---
 t/t4014-format-patch.sh       |   14 ++------
 t/t5305-include-tag.sh        |    4 +--
 t/t5602-clone-remote-exec.sh  |   13 ++------
 t/t5801-remote-helpers.sh     |    6 +--
 t/t6006-rev-list-format.sh    |    9 ++---
 t/t7006-pager.sh              |   18 ++---------
 12 files changed, 42 insertions(+), 152 deletions(-)

diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh
index c9c426c..3e3f77b 100755
--- a/t/t1300-repo-config.sh
+++ b/t/t1300-repo-config.sh
@@ -974,24 +974,15 @@ test_expect_success SYMLINKS 'symlinked configuration' '
 '

 test_expect_success 'nonexistent configuration' '
-	(
-		GIT_CONFIG=doesnotexist &&
-		export GIT_CONFIG &&
-		test_must_fail git config --list &&
-		test_must_fail git config test.xyzzy
-	)
+	test_must_fail env GIT_CONFIG=doesnotexist git config --list &&
+	test_must_fail env GIT_CONFIG=doesnotexist git config test.xyzzy
 '

 test_expect_success SYMLINKS 'symlink to nonexistent configuration' '
 	ln -s doesnotexist linktonada &&
 	ln -s linktonada linktolinktonada &&
-	(
-		GIT_CONFIG=linktonada &&
-		export GIT_CONFIG &&
-		test_must_fail git config --list &&
-		GIT_CONFIG=linktolinktonada &&
-		test_must_fail git config --list
-	)
+	test_must_fail env GIT_CONFIG=linktonada git config --list &&
+	test_must_fail env GIT_CONFIG=linktolinktonada git config --list
 '

 test_expect_success 'check split_cmdline return' "
diff --git a/t/t1510-repo-setup.sh b/t/t1510-repo-setup.sh
index cf2ee78..e1b2a99 100755
--- a/t/t1510-repo-setup.sh
+++ b/t/t1510-repo-setup.sh
@@ -777,9 +777,7 @@ test_expect_success '#30: core.worktree and core.bare conflict (gitfile version)
 	setup_repo 30 "$here/30" gitfile true &&
 	(
 		cd 30 &&
-		GIT_DIR=.git &&
-		export GIT_DIR &&
-		test_must_fail git symbolic-ref HEAD 2>result
+		test_must_fail env GIT_DIR=.git git symbolic-ref HEAD 2>result
 	) &&
 	grep "core.bare and core.worktree" 30/result
 '
diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh
index fcdb867..d45e95c 100755
--- a/t/t3200-branch.sh
+++ b/t/t3200-branch.sh
@@ -849,11 +849,7 @@ test_expect_success 'detect typo in branch name when using --edit-description' '
 	write_script editor <<-\EOF &&
 		echo "New contents" >"$1"
 	EOF
-	(
-		EDITOR=./editor &&
-		export EDITOR &&
-		test_must_fail git branch --edit-description no-such-branch
-	)
+	test_must_fail env EDITOR=./editor git branch --edit-description no-such-branch
 '

 test_expect_success 'refuse --edit-description on unborn branch for now' '
@@ -861,11 +857,7 @@ test_expect_success 'refuse --edit-description on unborn branch for now' '
 		echo "New contents" >"$1"
 	EOF
 	git checkout --orphan unborn &&
-	(
-		EDITOR=./editor &&
-		export EDITOR &&
-		test_must_fail git branch --edit-description
-	)
+	test_must_fail env EDITOR=./editor git branch --edit-description
 '

 test_expect_success '--merged catches invalid object names' '
diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh
index 3bb79a4..cfd67ff 100755
--- a/t/t3301-notes.sh
+++ b/t/t3301-notes.sh
@@ -17,7 +17,7 @@ GIT_EDITOR=./fake_editor.sh
 export GIT_EDITOR

 test_expect_success 'cannot annotate non-existing HEAD' '
-	(MSG=3 && export MSG && test_must_fail git notes add)
+	test_must_fail env MSG=3 git notes add
 '

 test_expect_success setup '
@@ -32,22 +32,16 @@ test_expect_success setup '
 '

 test_expect_success 'need valid notes ref' '
-	(MSG=1 GIT_NOTES_REF=/ && export MSG GIT_NOTES_REF &&
-	 test_must_fail git notes add) &&
-	(MSG=2 GIT_NOTES_REF=/ && export MSG GIT_NOTES_REF &&
-	 test_must_fail git notes show)
+	test_must_fail env MSG=1 GIT_NOTES_REF=/ git notes show &&
+	test_must_fail env MSG=2 GIT_NOTES_REF=/ git notes show
 '

 test_expect_success 'refusing to add notes in refs/heads/' '
-	(MSG=1 GIT_NOTES_REF=refs/heads/bogus &&
-	 export MSG GIT_NOTES_REF &&
-	 test_must_fail git notes add)
+	test_must_fail env MSG=1 GIT_NOTES_REF=refs/heads/bogus git notes add
 '

 test_expect_success 'refusing to edit notes in refs/remotes/' '
-	(MSG=1 GIT_NOTES_REF=refs/remotes/bogus &&
-	 export MSG GIT_NOTES_REF &&
-	 test_must_fail git notes edit)
+	test_must_fail env MSG=1 GIT_NOTES_REF=refs/heads/bogus git notes edit
 '

 # 1 indicates caught gracefully by die, 128 means git-show barked
@@ -865,11 +859,7 @@ test_expect_success 'create note from non-existing note with "git notes add -c"
 	git add a10 &&
 	test_tick &&
 	git commit -m 10th &&
-	(
-		MSG="yet another note" &&
-		export MSG &&
-		test_must_fail git notes add -c deadbeef
-	) &&
+	test_must_fail env MSG="yet another note" git notes add -c deadbeef &&
 	test_must_fail git notes list HEAD
 '

diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh
index 50e22b1..c0023a5 100755
--- a/t/t3404-rebase-interactive.sh
+++ b/t/t3404-rebase-interactive.sh
@@ -102,12 +102,8 @@ test_expect_success 'rebase -i with the exec command runs from tree root' '

 test_expect_success 'rebase -i with the exec command checks tree cleanness' '
 	git checkout master &&
-	(
 	set_fake_editor &&
-	FAKE_LINES="exec_echo_foo_>file1 1" &&
-	export FAKE_LINES &&
-	test_must_fail git rebase -i HEAD^
-	) &&
+	test_must_fail env FAKE_LINES="exec_echo_foo_>file1 1" git rebase -i HEAD^ &&
 	test_cmp_rev master^ HEAD &&
 	git reset --hard &&
 	git rebase --continue
@@ -116,12 +112,9 @@ test_expect_success 'rebase -i with the exec command checks tree cleanness' '
 test_expect_success 'rebase -i with exec of inexistent command' '
 	git checkout master &&
 	test_when_finished "git rebase --abort" &&
-	(
 	set_fake_editor &&
-	FAKE_LINES="exec_this-command-does-not-exist 1" &&
-	export FAKE_LINES &&
-	test_must_fail git rebase -i HEAD^ >actual 2>&1
-	) &&
+	test_must_fail env FAKE_LINES="exec_this-command-does-not-exist 1" \
+	git rebase -i HEAD^ >actual 2>&1 &&
 	! grep "Maybe git-rebase is broken" actual
 '

@@ -375,11 +368,7 @@ test_expect_success 'commit message used after conflict' '
 	git checkout -b conflict-fixup conflict-branch &&
 	base=$(git rev-parse HEAD~4) &&
 	set_fake_editor &&
-	(
-		FAKE_LINES="1 fixup 3 fixup 4" &&
-		export FAKE_LINES &&
-		test_must_fail git rebase -i $base
-	) &&
+	test_must_fail env FAKE_LINES="1 fixup 3 fixup 4" git rebase -i $base &&
 	echo three > conflict &&
 	git add conflict &&
 	FAKE_COMMIT_AMEND="ONCE" EXPECT_HEADER_COUNT=2 \
@@ -394,11 +383,7 @@ test_expect_success 'commit message retained after conflict' '
 	git checkout -b conflict-squash conflict-branch &&
 	base=$(git rev-parse HEAD~4) &&
 	set_fake_editor &&
-	(
-		FAKE_LINES="1 fixup 3 squash 4" &&
-		export FAKE_LINES &&
-		test_must_fail git rebase -i $base
-	) &&
+	test_must_fail env FAKE_LINES="1 fixup 3 squash 4" git rebase -i $base &&
 	echo three > conflict &&
 	git add conflict &&
 	FAKE_COMMIT_AMEND="TWICE" EXPECT_HEADER_COUNT=2 \
@@ -469,11 +454,7 @@ test_expect_success 'interrupted squash works as expected' '
 	git checkout -b interrupted-squash conflict-branch &&
 	one=$(git rev-parse HEAD~3) &&
 	set_fake_editor &&
-	(
-		FAKE_LINES="1 squash 3 2" &&
-		export FAKE_LINES &&
-		test_must_fail git rebase -i HEAD~3
-	) &&
+	test_must_fail env FAKE_LINES="1 squash 3 2" git rebase -i HEAD~3 &&
 	(echo one; echo two; echo four) > conflict &&
 	git add conflict &&
 	test_must_fail git rebase --continue &&
@@ -487,11 +468,7 @@ test_expect_success 'interrupted squash works as expected (case 2)' '
 	git checkout -b interrupted-squash2 conflict-branch &&
 	one=$(git rev-parse HEAD~3) &&
 	set_fake_editor &&
-	(
-		FAKE_LINES="3 squash 1 2" &&
-		export FAKE_LINES &&
-		test_must_fail git rebase -i HEAD~3
-	) &&
+	test_must_fail env FAKE_LINES="3 squash 1 2" git rebase -i HEAD~3 &&
 	(echo one; echo four) > conflict &&
 	git add conflict &&
 	test_must_fail git rebase --continue &&
@@ -528,11 +505,7 @@ test_expect_success 'aborted --continue does not squash commits after "edit"' '
 	FAKE_LINES="edit 1" git rebase -i HEAD^ &&
 	echo "edited again" > file7 &&
 	git add file7 &&
-	(
-		FAKE_COMMIT_MESSAGE=" " &&
-		export FAKE_COMMIT_MESSAGE &&
-		test_must_fail git rebase --continue
-	) &&
+	test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue &&
 	test $old = $(git rev-parse HEAD) &&
 	git rebase --abort
 '
@@ -547,11 +520,7 @@ test_expect_success 'auto-amend only edited commits after "edit"' '
 	echo "and again" > file7 &&
 	git add file7 &&
 	test_tick &&
-	(
-		FAKE_COMMIT_MESSAGE="and again" &&
-		export FAKE_COMMIT_MESSAGE &&
-		test_must_fail git rebase --continue
-	) &&
+	test_must_fail env FAKE_COMMIT_MESSAGE="and again" git rebase --continue &&
 	git rebase --abort
 '

@@ -559,11 +528,7 @@ test_expect_success 'clean error after failed "exec"' '
 	test_tick &&
 	test_when_finished "git rebase --abort || :" &&
 	set_fake_editor &&
-	(
-		FAKE_LINES="1 exec_false" &&
-		export FAKE_LINES &&
-		test_must_fail git rebase -i HEAD^
-	) &&
+	test_must_fail env FAKE_LINES="1 exec_false" git rebase -i HEAD^ &&
 	echo "edited again" > file7 &&
 	git add file7 &&
 	test_must_fail git rebase --continue 2>error &&
@@ -947,12 +912,8 @@ test_expect_success 'rebase -i --root retain root commit author and message' '

 test_expect_success 'rebase -i --root temporary sentinel commit' '
 	git checkout B &&
-	(
-		set_fake_editor &&
-		FAKE_LINES="2" &&
-		export FAKE_LINES &&
-		test_must_fail git rebase -i --root
-	) &&
+	set_fake_editor &&
+	test_must_fail env FAKE_LINES="2" git rebase -i --root &&
 	git cat-file commit HEAD | grep "^tree 4b825dc642cb" &&
 	git rebase --abort
 '
@@ -1042,11 +1003,7 @@ test_expect_success 'rebase -i error on commits with \ in message' '
 	test_when_finished "git rebase --abort; git reset --hard $current_head; rm -f error" &&
 	test_commit TO-REMOVE will-conflict old-content &&
 	test_commit "\temp" will-conflict new-content dummy &&
-	(
-	EDITOR=true &&
-	export EDITOR &&
-	test_must_fail git rebase -i HEAD^ --onto HEAD^^ 2>error
-	) &&
+	test_must_fail env EDITOR=true git rebase -i HEAD^ --onto HEAD^^ 2>error &&
 	test_expect_code 1 grep  "	emp" error
 '

diff --git a/t/t3413-rebase-hook.sh b/t/t3413-rebase-hook.sh
index 098b755..b6833e9 100755
--- a/t/t3413-rebase-hook.sh
+++ b/t/t3413-rebase-hook.sh
@@ -118,11 +118,7 @@ test_expect_success 'pre-rebase hook stops rebase (1)' '
 test_expect_success 'pre-rebase hook stops rebase (2)' '
 	git checkout test &&
 	git reset --hard side &&
-	(
-		EDITOR=:
-		export EDITOR
-		test_must_fail git rebase -i master
-	) &&
+	test_must_fail env EDITOR=: git rebase -i master &&
 	test "z$(git symbolic-ref HEAD)" = zrefs/heads/test &&
 	test 0 = $(git rev-list HEAD...side | wc -l)
 '
diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh
index 73194b2..9c80633 100755
--- a/t/t4014-format-patch.sh
+++ b/t/t4014-format-patch.sh
@@ -764,22 +764,14 @@ test_expect_success 'format-patch --signature="" suppresses signatures' '

 test_expect_success TTY 'format-patch --stdout paginates' '
 	rm -f pager_used &&
-	(
-		GIT_PAGER="wc >pager_used" &&
-		export GIT_PAGER &&
-		test_terminal git format-patch --stdout --all
-	) &&
+	test_terminal env GIT_PAGER="wc >pager_used" git format-patch --stdout --all &&
 	test_path_is_file pager_used
 '

  test_expect_success TTY 'format-patch --stdout pagination can be disabled' '
 	rm -f pager_used &&
-	(
-		GIT_PAGER="wc >pager_used" &&
-		export GIT_PAGER &&
-		test_terminal git --no-pager format-patch --stdout --all &&
-		test_terminal git -c "pager.format-patch=false" format-patch --stdout --all
-	) &&
+	test_terminal env GIT_PAGER="wc >pager_used" git --no-pager format-patch --stdout --all &&
+	test_terminal env GIT_PAGER="wc >pager_used" git -c "pager.format-patch=false" format-patch --stdout --all &&
 	test_path_is_missing pager_used &&
 	test_path_is_missing .git/pager_used
 '
diff --git a/t/t5305-include-tag.sh b/t/t5305-include-tag.sh
index b061864..21517c7 100755
--- a/t/t5305-include-tag.sh
+++ b/t/t5305-include-tag.sh
@@ -45,9 +45,7 @@ test_expect_success 'unpack objects' '
 test_expect_success 'check unpacked result (have commit, no tag)' '
 	git rev-list --objects $commit >list.expect &&
 	(
-		GIT_DIR=clone.git &&
-		export GIT_DIR &&
-		test_must_fail git cat-file -e $tag &&
+		test_must_fail env GIT_DIR=clone.git git cat-file -e $tag &&
 		git rev-list --objects $commit
 	) >list.actual &&
 	test_cmp list.expect list.actual
diff --git a/t/t5602-clone-remote-exec.sh b/t/t5602-clone-remote-exec.sh
index 3f353d9..cbcceab 100755
--- a/t/t5602-clone-remote-exec.sh
+++ b/t/t5602-clone-remote-exec.sh
@@ -12,21 +12,14 @@ test_expect_success setup '
 '

 test_expect_success 'clone calls git upload-pack unqualified with no -u option' '
-	(
-		GIT_SSH=./not_ssh &&
-		export GIT_SSH &&
-		test_must_fail git clone localhost:/path/to/repo junk
-	) &&
+	test_must_fail env GIT_SSH=./not_ssh git clone localhost:/path/to/repo junk &&
 	echo "localhost git-upload-pack '\''/path/to/repo'\''" >expected &&
 	test_cmp expected not_ssh_output
 '

 test_expect_success 'clone calls specified git upload-pack with -u option' '
-	(
-		GIT_SSH=./not_ssh &&
-		export GIT_SSH &&
-		test_must_fail git clone -u ./something/bin/git-upload-pack localhost:/path/to/repo junk
-	) &&
+	test_must_fail env GIT_SSH=./not_ssh \
+		git clone -u ./something/bin/git-upload-pack localhost:/path/to/repo junk &&
 	echo "localhost ./something/bin/git-upload-pack '\''/path/to/repo'\''" >expected &&
 	test_cmp expected not_ssh_output
 '
diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh
index 613f69a..ca19838 100755
--- a/t/t5801-remote-helpers.sh
+++ b/t/t5801-remote-helpers.sh
@@ -218,10 +218,8 @@ test_expect_success 'proper failure checks for fetching' '
 '

 test_expect_success 'proper failure checks for pushing' '
-	(GIT_REMOTE_TESTGIT_FAILURE=1 &&
-	export GIT_REMOTE_TESTGIT_FAILURE &&
-	cd local &&
-	test_must_fail git push --all
+	(cd local &&
+	test_must_fail env GIT_REMOTE_TESTGIT_FAILURE=1 git push --all
 	)
 '

diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh
index 9874403..9d9d9de 100755
--- a/t/t6006-rev-list-format.sh
+++ b/t/t6006-rev-list-format.sh
@@ -190,12 +190,9 @@ test_expect_success '%C(auto) respects --no-color' '
 '

 test_expect_success TTY '%C(auto) respects --color=auto (stdout is tty)' '
-	(
-		TERM=vt100 && export TERM &&
-		test_terminal \
-			git log --format=$AUTO_COLOR -1 --color=auto >actual &&
-		has_color actual
-	)
+	test_terminal env TERM=vt100 \
+		git log --format=$AUTO_COLOR -1 --color=auto >actual &&
+	has_color actual
 '

 test_expect_success '%C(auto) respects --color=auto (stdout not tty)' '
diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh
index b9365b4..da958a8 100755
--- a/t/t7006-pager.sh
+++ b/t/t7006-pager.sh
@@ -146,11 +146,7 @@ test_expect_success 'no color when stdout is a regular file' '
 test_expect_success TTY 'color when writing to a pager' '
 	rm -f paginated.out &&
 	test_config color.ui auto &&
-	(
-		TERM=vt100 &&
-		export TERM &&
-		test_terminal git log
-	) &&
+	test_terminal env TERM=vt100 git log &&
 	colorful paginated.out
 '

@@ -158,11 +154,7 @@ test_expect_success TTY 'colors are suppressed by color.pager' '
 	rm -f paginated.out &&
 	test_config color.ui auto &&
 	test_config color.pager false &&
-	(
-		TERM=vt100 &&
-		export TERM &&
-		test_terminal git log
-	) &&
+	test_terminal env TERM=vt100 git log &&
 	! colorful paginated.out
 '

@@ -181,11 +173,7 @@ test_expect_success 'color when writing to a file intended for a pager' '
 test_expect_success TTY 'colors are sent to pager for external commands' '
 	test_config alias.externallog "!git log" &&
 	test_config color.ui auto &&
-	(
-		TERM=vt100 &&
-		export TERM &&
-		test_terminal git -p externallog
-	) &&
+	test_terminal env TERM=vt100 git -p externallog &&
 	colorful paginated.out
 '

--
1.7.9

^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH v4] tests: use "env" to run commands with temporary env-var settings
  2014-03-20 10:51 [PATCH v4] tests: use "env" to run commands with temporary env-var settings David Tran
@ 2014-03-20 19:25 ` Junio C Hamano
  0 siblings, 0 replies; 2+ messages in thread
From: Junio C Hamano @ 2014-03-20 19:25 UTC (permalink / raw)
  To: David Tran; +Cc: git

David Tran <unsignedzero@gmail.com> writes:

> Ordinarily, we would say "VAR=VAL command" to execute a tested command with
> environment variable(s) set only for that command. This however does not work
> if 'command' is a shell function (most notably 'test_must_fail'); the result
> of the assignment is retained and affects later commands.
>
> To avoid this, we assigned and exported the environment variables and run such
> test(s) in a subshell like this,
>
> 	(
> 		VAR=VAL &&
> 		export VAR &&
> 		test_must_fail git command to be tested
> 	)
>
> Using the "env" utility, we should be able to say
>
> 	test_must_fail git command to be tested
>
> which is much shorter and easier to read.
>
> Signed-off-by: David Tran <unsignedzero@gmail.com>
>
> ---
> ...
>>Looks familiar ;-) but it seems the changes from the original you
>>took it from all look worsening, not improvements, to me.
> I learn more from rewriting than copying and pasting but I'll change most of it
> back then.

Sigh.  Your edits again butchered the correctness.

Re-read your "this is a new and better way to write test_must_fail"
example above, and compare it with what was queued on 'pu'.

I think we are hitting the point of diminishing or negative returns
at this point.  Let's keep 512477b1 (tests: use "env" to run
commands with temporary env-var settings, 2014-03-18) and go forward
with it.

Thanks.

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2014-03-20 19:26 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-20 10:51 [PATCH v4] tests: use "env" to run commands with temporary env-var settings David Tran
2014-03-20 19:25 ` Junio C Hamano

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).