* [PATCH 000/144] Use the $( ... ) construct for command substitution instead of using the back-quotes
@ 2014-03-24 16:56 Elia Pinto
2014-03-25 16:20 ` Junio C Hamano
0 siblings, 1 reply; 3+ messages in thread
From: Elia Pinto @ 2014-03-24 16:56 UTC (permalink / raw)
To: git; +Cc: Elia Pinto
This patch series changes everywhere the back-quotes construct for command
substitution with the $( ... ). The Git CodingGuidelines prefer
the $( ... ) construct for command substitution instead of using the back-quotes
, or grave accents (`..`).
The backquoted form is the historical method for command substitution,
and is supported by POSIX. However,all but the simplest uses become
complicated quickly. In particular,embedded command substitutions
and/or the use of double quotes require careful escaping with the backslash
character. Because of this the POSIX shell adopted the $(…) feature from
the Korn shell. Because this construct uses distinct
opening and closing delimiters, it is much easier to follow.
Also now the embedded double quotes no longer need escaping.
The patch is simple but involves a large number of files with different authors.
Being simple I think it is wasteful to cc a large number of different people
for doing a review.
Elia Pinto (144):
check-builtins.sh: use the $( ... ) construct for command
substitution
git-am.sh: use the $( ... ) construct for command substitution
git-pull.sh: use the $( ... ) construct for command substitution
git-rebase--merge.sh: use the $( ... ) construct for command
substitution
git-rebase.sh: use the $( ... ) construct for command substitution
git-stash.sh: use the $( ... ) construct for command substitution
git-web--browse.sh: use the $( ... ) construct for command
substitution
unimplemented.sh: use the $( ... ) construct for command substitution
t0001-init.sh: use the $( ... ) construct for command substitution
t0010-racy-git.sh: use the $( ... ) construct for command
substitution
t0020-crlf.sh: use the $( ... ) construct for command substitution
t0025-crlf-auto.sh: use the $( ... ) construct for command
substitution
t0026-eol-config.sh: use the $( ... ) construct for command
substitution
t0030-stripspace.sh: use the $( ... ) construct for command
substitution
t0204-gettext-reencode-sanity.sh: use the $( ... ) construct for
command substitution
t0300-credentials.sh: use the $( ... ) construct for command
substitution
t1000-read-tree-m-3way.sh: use the $( ... ) construct for command
substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command
substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command
substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command
substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command
substitution
t1020-subdirectory.sh: use the $( ... ) construct for command
substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1100-commit-tree-options.sh: use the $( ... ) construct for command
substitution
t1401-symbolic-ref.sh: use the $( ... ) construct for command
substitution
t1410-reflog.sh: use the $( ... ) construct for command substitution
t1511-rev-parse-caret.sh: use the $( ... ) construct for command
substitution
t1512-rev-parse-disambiguation.sh: use the $( ... ) construct for
command substitution
t2102-update-index-symlinks.sh: use the $( ... ) construct for
command substitution
t3030-merge-recursive.sh: use the $( ... ) construct for command
substitution
t3100-ls-tree-restrict.sh: use the $( ... ) construct for command
substitution
t3101-ls-tree-dirname.sh: use the $( ... ) construct for command
substitution
t3210-pack-refs.sh: use the $( ... ) construct for command
substitution
t3403-rebase-skip.sh: use the $( ... ) construct for command
substitution
t3511-cherry-pick-x.sh: use the $( ... ) construct for command
substitution
t3600-rm.sh: use the $( ... ) construct for command substitution
t3700-add.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for
command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command
substitution
t4006-diff-mode.sh: use the $( ... ) construct for command
substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command
substitution
t4012-diff-binary.sh: use the $( ... ) construct for command
substitution
t4013-diff-various.sh: use the $( ... ) construct for command
substitution
t4014-format-patch.sh: use the $( ... ) construct for command
substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for
command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command
substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command
substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command
substitution
t4119-apply-config.sh: use the $( ... ) construct for command
substitution
t4204-patch-id.sh: use the $( ... ) construct for command
substitution
t5000-tar-tree.sh: use the $( ... ) construct for command
substitution
t5003-archive-zip.sh: use the $( ... ) construct for command
substitution
t5100-mailinfo.sh: use the $( ... ) construct for command
substitution
t5300-pack-object.sh: use the $( ... ) construct for command
substitution
t5301-sliding-window.sh: use the $( ... ) construct for command
substitution
t5302-pack-index.sh: use the $( ... ) construct for command
substitution
t5303-pack-corruption-resilience.sh: use the $( ... ) construct for
command substitution
t5304-prune.sh: use the $( ... ) construct for command substitution
t5305-include-tag.sh: use the $( ... ) construct for command
substitution
t5500-fetch-pack.sh: use the $( ... ) construct for command
substitution
t5505-remote.sh: use the $( ... ) construct for command substitution
t5506-remote-groups.sh: use the $( ... ) construct for command
substitution
t5510-fetch.sh: use the $( ... ) construct for command substitution
t5515-fetch-merge-logic.sh: use the $( ... ) construct for command
substitution
t5516-fetch-push.sh: use the $( ... ) construct for command
substitution
t5517-push-mirror.sh: use the $( ... ) construct for command
substitution
t5520-pull.sh: use the $( ... ) construct for command substitution
t5522-pull-symlink.sh: use the $( ... ) construct for command
substitution
t5530-upload-pack-error.sh: use the $( ... ) construct for command
substitution
t5537-fetch-shallow.sh: use the $( ... ) construct for command
substitution
t5538-push-shallow.sh: use the $( ... ) construct for command
substitution
t5550-http-fetch-dumb.sh: use the $( ... ) construct for command
substitution
t5551-http-fetch-smart.sh: use the $( ... ) construct for command
substitution
t5570-git-daemon.sh: use the $( ... ) construct for command
substitution
t5601-clone.sh: use the $( ... ) construct for command substitution
t5700-clone-reference.sh: use the $( ... ) construct for command
substitution
t5710-info-alternate.sh: use the $( ... ) construct for command
substitution
t5900-repo-selection.sh: use the $( ... ) construct for command
substitution
t6001-rev-list-graft.sh: use the $( ... ) construct for command
substitution
t6002-rev-list-bisect.sh: use the $( ... ) construct for command
substitution
t6015-rev-list-show-all-parents.sh: use the $( ... ) construct for
command substitution
t6032-merge-large-rename.sh: use the $( ... ) construct for command
substitution
t6034-merge-rename-nocruft.sh: use the $( ... ) construct for command
substitution
t6111-rev-list-treesame.sh: use the $( ... ) construct for command
substitution
t6132-pathspec-exclude.sh: use the $( ... ) construct for command
substitution
t7001-mv.sh: use the $( ... ) construct for command substitution
t7003-filter-branch.sh: use the $( ... ) construct for command
substitution
t7004-tag.sh: use the $( ... ) construct for command substitution
t7006-pager.sh: use the $( ... ) construct for command substitution
t7103-reset-bare.sh: use the $( ... ) construct for command
substitution
t7406-submodule-update.sh: use the $( ... ) construct for command
substitution
t7408-submodule-reference.sh: use the $( ... ) construct for command
substitution
t7504-commit-msg-hook.sh: use the $( ... ) construct for command
substitution
t7505-prepare-commit-msg-hook.sh: use the $( ... ) construct for
command substitution
t7602-merge-octopus-many.sh: use the $( ... ) construct for command
substitution
t7700-repack.sh: use the $( ... ) construct for command substitution
t8003-blame-corner-cases.sh: use the $( ... ) construct for command
substitution
t9001-send-email.sh: use the $( ... ) construct for command
substitution
t9101-git-svn-props.sh: use the $( ... ) construct for command
substitution
t9104-git-svn-follow-parent.sh: use the $( ... ) construct for
command substitution
t9105-git-svn-commit-diff.sh: use the $( ... ) construct for command
substitution
t9107-git-svn-migrate.sh: use the $( ... ) construct for command
substitution
t9108-git-svn-glob.sh: use the $( ... ) construct for command
substitution
t9109-git-svn-multi-glob.sh: use the $( ... ) construct for command
substitution
t9110-git-svn-use-svm-props.sh: use the $( ... ) construct for
command substitution
t9114-git-svn-dcommit-merge.sh: use the $( ... ) construct for
command substitution
t9118-git-svn-funky-branch-names.sh: use the $( ... ) construct for
command substitution
t9119-git-svn-info.sh: use the $( ... ) construct for command
substitution
t9129-git-svn-i18n-commitencoding.sh: use the $( ... ) construct for
command substitution
t9130-git-svn-authors-file.sh: use the $( ... ) construct for command
substitution
t9132-git-svn-broken-symlink.sh: use the $( ... ) construct for
command substitution
t9137-git-svn-dcommit-clobber-series.sh: use the $( ... ) construct
for command substitution
t9138-git-svn-authors-prog.sh: use the $( ... ) construct for command
substitution
t9145-git-svn-master-branch.sh: use the $( ... ) construct for
command substitution
t9150-svk-mergetickets.sh: use the $( ... ) construct for command
substitution
t9300-fast-import.sh: use the $( ... ) construct for command
substitution
t9350-fast-export.sh: use the $( ... ) construct for command
substitution
t9501-gitweb-standalone-http-status.sh: use the $( ... ) construct
for command substitution
t9901-git-web--browse.sh: use the $( ... ) construct for command
substitution
test-lib-functions.sh: use the $( ... ) construct for command
substitution
lib-credential.sh: use the $( ... ) construct for command
substitution
lib-cvs.sh: use the $( ... ) construct for command substitution
lib-gpg.sh: use the $( ... ) construct for command substitution
p5302-pack-index.sh: use the $( ... ) construct for command
substitution
howto-index.sh: use the $( ... ) construct for command substitution
install-webdoc.sh: use the $( ... ) construct for command
substitution
git-checkout.sh: use the $( ... ) construct for command substitution
git-clone.sh: use the $( ... ) construct for command substitution
git-commit.sh: use the $( ... ) construct for command substitution
git-fetch.sh: use the $( ... ) construct for command substitution
git-ls-remote.sh: use the $( ... ) construct for command substitution
git-merge.sh: use the $( ... ) construct for command substitution
git-repack.sh: use the $( ... ) construct for command substitution
git-resolve.sh: use the $( ... ) construct for command substitution
git-revert.sh: use the $( ... ) construct for command substitution
git-tag.sh: use the $( ... ) construct for command substitution
t9360-mw-to-git-clone.sh: use the $( ... ) construct for command
substitution
t9362-mw-to-git-utf8.sh: use the $( ... ) construct for command
substitution
t9365-continuing-queries.sh: use the $( ... ) construct for command
substitution
test-gitmw-lib.sh: use the $( ... ) construct for command
substitution
t7900-subtree.sh: use the $( ... ) construct for command substitution
appp.sh: use the $( ... ) construct for command substitution
txt-to-pot.sh: use the $( ... ) construct for command substitution
t9100-git-svn-basic.sh: use the $( ... ) construct for command
substitution
Documentation/howto-index.sh | 12 ++--
Documentation/install-webdoc.sh | 6 +-
check-builtins.sh | 4 +-
contrib/examples/git-checkout.sh | 8 +--
contrib/examples/git-clone.sh | 20 +++----
contrib/examples/git-commit.sh | 10 ++--
contrib/examples/git-fetch.sh | 6 +-
contrib/examples/git-ls-remote.sh | 4 +-
contrib/examples/git-merge.sh | 4 +-
contrib/examples/git-repack.sh | 2 +-
contrib/examples/git-resolve.sh | 2 +-
contrib/examples/git-revert.sh | 2 +-
contrib/examples/git-tag.sh | 2 +-
contrib/mw-to-git/t/t9360-mw-to-git-clone.sh | 14 ++---
contrib/mw-to-git/t/t9362-mw-to-git-utf8.sh | 4 +-
contrib/mw-to-git/t/t9365-continuing-queries.sh | 2 +-
contrib/mw-to-git/t/test-gitmw-lib.sh | 6 +-
contrib/subtree/t/t7900-subtree.sh | 2 +-
contrib/thunderbird-patch-inline/appp.sh | 14 ++---
git-am.sh | 30 +++++-----
git-gui/po/glossary/txt-to-pot.sh | 4 +-
git-pull.sh | 2 +-
git-rebase--merge.sh | 4 +-
git-rebase.sh | 8 +--
git-stash.sh | 2 +-
git-web--browse.sh | 6 +-
t/lib-credential.sh | 2 +-
t/lib-cvs.sh | 2 +-
t/lib-gpg.sh | 2 +-
t/perf/p5302-pack-index.sh | 2 +-
t/t0001-init.sh | 12 ++--
t/t0010-racy-git.sh | 4 +-
t/t0020-crlf.sh | 42 +++++++-------
t/t0025-crlf-auto.sh | 38 ++++++-------
t/t0026-eol-config.sh | 20 +++----
t/t0030-stripspace.sh | 20 +++----
t/t0204-gettext-reencode-sanity.sh | 2 +-
t/t0300-credentials.sh | 2 +-
t/t1000-read-tree-m-3way.sh | 4 +-
t/t1001-read-tree-m-2way.sh | 18 +++---
t/t1002-read-tree-m-u-2way.sh | 10 ++--
t/t1003-read-tree-prefix.sh | 2 +-
t/t1004-read-tree-m-u-wf.sh | 8 +--
t/t1020-subdirectory.sh | 22 ++++----
t/t1050-large.sh | 4 +-
t/t1100-commit-tree-options.sh | 4 +-
t/t1401-symbolic-ref.sh | 2 +-
t/t1410-reflog.sh | 24 ++++----
t/t1511-rev-parse-caret.sh | 4 +-
t/t1512-rev-parse-disambiguation.sh | 8 +--
t/t2102-update-index-symlinks.sh | 2 +-
t/t3030-merge-recursive.sh | 2 +-
t/t3100-ls-tree-restrict.sh | 2 +-
t/t3101-ls-tree-dirname.sh | 2 +-
t/t3210-pack-refs.sh | 2 +-
t/t3403-rebase-skip.sh | 2 +-
t/t3511-cherry-pick-x.sh | 14 ++---
t/t3600-rm.sh | 4 +-
t/t3700-add.sh | 16 +++---
t/t3905-stash-include-untracked.sh | 4 +-
t/t3910-mac-os-precompose.sh | 16 +++---
t/t4006-diff-mode.sh | 2 +-
t/t4010-diff-pathspec.sh | 4 +-
t/t4012-diff-binary.sh | 16 +++---
t/t4013-diff-various.sh | 6 +-
t/t4014-format-patch.sh | 10 ++--
t/t4036-format-patch-signer-mime.sh | 2 +-
t/t4038-diff-combined.sh | 2 +-
t/t4057-diff-combined-paths.sh | 2 +-
t/t4116-apply-reverse.sh | 12 ++--
t/t4119-apply-config.sh | 2 +-
t/t4204-patch-id.sh | 4 +-
t/t5000-tar-tree.sh | 6 +-
t/t5003-archive-zip.sh | 2 +-
t/t5100-mailinfo.sh | 12 ++--
t/t5300-pack-object.sh | 18 +++---
t/t5301-sliding-window.sh | 14 ++---
t/t5302-pack-index.sh | 34 ++++++------
t/t5303-pack-corruption-resilience.sh | 8 +--
t/t5304-prune.sh | 2 +-
t/t5305-include-tag.sh | 8 +--
t/t5500-fetch-pack.sh | 16 +++---
t/t5505-remote.sh | 2 +-
t/t5506-remote-groups.sh | 2 +-
t/t5510-fetch.sh | 10 ++--
t/t5515-fetch-merge-logic.sh | 4 +-
t/t5516-fetch-push.sh | 4 +-
t/t5517-push-mirror.sh | 2 +-
t/t5520-pull.sh | 10 ++--
t/t5522-pull-symlink.sh | 2 +-
t/t5530-upload-pack-error.sh | 2 +-
t/t5537-fetch-shallow.sh | 4 +-
t/t5538-push-shallow.sh | 4 +-
t/t5550-http-fetch-dumb.sh | 8 +--
t/t5551-http-fetch-smart.sh | 2 +-
t/t5570-git-daemon.sh | 8 +--
t/t5601-clone.sh | 2 +-
t/t5700-clone-reference.sh | 2 +-
t/t5710-info-alternate.sh | 2 +-
t/t5900-repo-selection.sh | 2 +-
t/t6001-rev-list-graft.sh | 12 ++--
t/t6002-rev-list-bisect.sh | 6 +-
t/t6015-rev-list-show-all-parents.sh | 6 +-
t/t6032-merge-large-rename.sh | 2 +-
t/t6034-merge-rename-nocruft.sh | 2 +-
t/t6111-rev-list-treesame.sh | 2 +-
t/t6132-pathspec-exclude.sh | 2 +-
t/t7001-mv.sh | 4 +-
t/t7003-filter-branch.sh | 6 +-
t/t7004-tag.sh | 16 +++---
t/t7006-pager.sh | 2 +-
t/t7103-reset-bare.sh | 2 +-
t/t7406-submodule-update.sh | 4 +-
t/t7408-submodule-reference.sh | 2 +-
t/t7504-commit-msg-hook.sh | 2 +-
t/t7505-prepare-commit-msg-hook.sh | 32 +++++------
t/t7602-merge-octopus-many.sh | 8 +--
t/t7700-repack.sh | 4 +-
t/t8003-blame-corner-cases.sh | 4 +-
t/t9001-send-email.sh | 10 ++--
t/t9100-git-svn-basic.sh | 24 ++++----
t/t9101-git-svn-props.sh | 30 +++++-----
t/t9104-git-svn-follow-parent.sh | 48 ++++++++--------
t/t9105-git-svn-commit-diff.sh | 4 +-
t/t9107-git-svn-migrate.sh | 16 +++---
t/t9108-git-svn-glob.sh | 20 +++----
t/t9109-git-svn-multi-glob.sh | 32 +++++------
t/t9110-git-svn-use-svm-props.sh | 2 +-
t/t9114-git-svn-dcommit-merge.sh | 12 ++--
t/t9118-git-svn-funky-branch-names.sh | 2 +-
t/t9119-git-svn-info.sh | 2 +-
t/t9129-git-svn-i18n-commitencoding.sh | 4 +-
t/t9130-git-svn-authors-file.sh | 12 ++--
t/t9132-git-svn-broken-symlink.sh | 4 +-
t/t9137-git-svn-dcommit-clobber-series.sh | 24 ++++----
t/t9138-git-svn-authors-prog.sh | 2 +-
t/t9145-git-svn-master-branch.sh | 4 +-
t/t9150-svk-mergetickets.sh | 2 +-
t/t9300-fast-import.sh | 68 +++++++++++------------
t/t9350-fast-export.sh | 6 +-
t/t9501-gitweb-standalone-http-status.sh | 6 +-
t/t9901-git-web--browse.sh | 2 +-
t/test-lib-functions.sh | 8 +--
unimplemented.sh | 2 +-
144 files changed, 611 insertions(+), 611 deletions(-)
--
1.7.10.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 000/144] Use the $( ... ) construct for command substitution instead of using the back-quotes
@ 2014-03-25 8:24 Elia Pinto
0 siblings, 0 replies; 3+ messages in thread
From: Elia Pinto @ 2014-03-25 8:24 UTC (permalink / raw)
To: git; +Cc: Elia Pinto
This patch series changes everywhere the back-quotes construct for command
substitution with the $( ... ). The Git CodingGuidelines prefer
the $( ... ) construct for command substitution instead of using the back-quotes
, or grave accents (`..`).
The backquoted form is the historical method for command substitution,
and is supported by POSIX. However,all but the simplest uses become
complicated quickly. In particular,embedded command substitutions
and/or the use of double quotes require careful escaping with the backslash
character. Because of this the POSIX shell adopted the $(…) feature from
the Korn shell. Because this construct uses distinct
opening and closing delimiters, it is much easier to follow.
Also now the embedded double quotes no longer need escaping.
The patch is simple but involves a large number of files with different authors.
Being simple I think it is wasteful to cc a large number of different people
for doing a review.
Elia Pinto (144):
check-builtins.sh: use the $( ... ) construct for command
substitution
git-am.sh: use the $( ... ) construct for command substitution
git-pull.sh: use the $( ... ) construct for command substitution
git-rebase--merge.sh: use the $( ... ) construct for command
substitution
git-rebase.sh: use the $( ... ) construct for command substitution
git-stash.sh: use the $( ... ) construct for command substitution
git-web--browse.sh: use the $( ... ) construct for command
substitution
unimplemented.sh: use the $( ... ) construct for command substitution
t0001-init.sh: use the $( ... ) construct for command substitution
t0010-racy-git.sh: use the $( ... ) construct for command
substitution
t0020-crlf.sh: use the $( ... ) construct for command substitution
t0025-crlf-auto.sh: use the $( ... ) construct for command
substitution
t0026-eol-config.sh: use the $( ... ) construct for command
substitution
t0030-stripspace.sh: use the $( ... ) construct for command
substitution
t0204-gettext-reencode-sanity.sh: use the $( ... ) construct for
command substitution
t0300-credentials.sh: use the $( ... ) construct for command
substitution
t1000-read-tree-m-3way.sh: use the $( ... ) construct for command
substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command
substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command
substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command
substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command
substitution
t1020-subdirectory.sh: use the $( ... ) construct for command
substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1100-commit-tree-options.sh: use the $( ... ) construct for command
substitution
t1401-symbolic-ref.sh: use the $( ... ) construct for command
substitution
t1410-reflog.sh: use the $( ... ) construct for command substitution
t1511-rev-parse-caret.sh: use the $( ... ) construct for command
substitution
t1512-rev-parse-disambiguation.sh: use the $( ... ) construct for
command substitution
t2102-update-index-symlinks.sh: use the $( ... ) construct for
command substitution
t3030-merge-recursive.sh: use the $( ... ) construct for command
substitution
t3100-ls-tree-restrict.sh: use the $( ... ) construct for command
substitution
t3101-ls-tree-dirname.sh: use the $( ... ) construct for command
substitution
t3210-pack-refs.sh: use the $( ... ) construct for command
substitution
t3403-rebase-skip.sh: use the $( ... ) construct for command
substitution
t3511-cherry-pick-x.sh: use the $( ... ) construct for command
substitution
t3600-rm.sh: use the $( ... ) construct for command substitution
t3700-add.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for
command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command
substitution
t4006-diff-mode.sh: use the $( ... ) construct for command
substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command
substitution
t4012-diff-binary.sh: use the $( ... ) construct for command
substitution
t4013-diff-various.sh: use the $( ... ) construct for command
substitution
t4014-format-patch.sh: use the $( ... ) construct for command
substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for
command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command
substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command
substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command
substitution
t4119-apply-config.sh: use the $( ... ) construct for command
substitution
t4204-patch-id.sh: use the $( ... ) construct for command
substitution
t5000-tar-tree.sh: use the $( ... ) construct for command
substitution
t5003-archive-zip.sh: use the $( ... ) construct for command
substitution
t5100-mailinfo.sh: use the $( ... ) construct for command
substitution
t5300-pack-object.sh: use the $( ... ) construct for command
substitution
t5301-sliding-window.sh: use the $( ... ) construct for command
substitution
t5302-pack-index.sh: use the $( ... ) construct for command
substitution
t5303-pack-corruption-resilience.sh: use the $( ... ) construct for
command substitution
t5304-prune.sh: use the $( ... ) construct for command substitution
t5305-include-tag.sh: use the $( ... ) construct for command
substitution
t5500-fetch-pack.sh: use the $( ... ) construct for command
substitution
t5505-remote.sh: use the $( ... ) construct for command substitution
t5506-remote-groups.sh: use the $( ... ) construct for command
substitution
t5510-fetch.sh: use the $( ... ) construct for command substitution
t5515-fetch-merge-logic.sh: use the $( ... ) construct for command
substitution
t5516-fetch-push.sh: use the $( ... ) construct for command
substitution
t5517-push-mirror.sh: use the $( ... ) construct for command
substitution
t5520-pull.sh: use the $( ... ) construct for command substitution
t5522-pull-symlink.sh: use the $( ... ) construct for command
substitution
t5530-upload-pack-error.sh: use the $( ... ) construct for command
substitution
t5537-fetch-shallow.sh: use the $( ... ) construct for command
substitution
t5538-push-shallow.sh: use the $( ... ) construct for command
substitution
t5550-http-fetch-dumb.sh: use the $( ... ) construct for command
substitution
t5551-http-fetch-smart.sh: use the $( ... ) construct for command
substitution
t5570-git-daemon.sh: use the $( ... ) construct for command
substitution
t5601-clone.sh: use the $( ... ) construct for command substitution
t5700-clone-reference.sh: use the $( ... ) construct for command
substitution
t5710-info-alternate.sh: use the $( ... ) construct for command
substitution
t5900-repo-selection.sh: use the $( ... ) construct for command
substitution
t6001-rev-list-graft.sh: use the $( ... ) construct for command
substitution
t6002-rev-list-bisect.sh: use the $( ... ) construct for command
substitution
t6015-rev-list-show-all-parents.sh: use the $( ... ) construct for
command substitution
t6032-merge-large-rename.sh: use the $( ... ) construct for command
substitution
t6034-merge-rename-nocruft.sh: use the $( ... ) construct for command
substitution
t6111-rev-list-treesame.sh: use the $( ... ) construct for command
substitution
t6132-pathspec-exclude.sh: use the $( ... ) construct for command
substitution
t7001-mv.sh: use the $( ... ) construct for command substitution
t7003-filter-branch.sh: use the $( ... ) construct for command
substitution
t7004-tag.sh: use the $( ... ) construct for command substitution
t7006-pager.sh: use the $( ... ) construct for command substitution
t7103-reset-bare.sh: use the $( ... ) construct for command
substitution
t7406-submodule-update.sh: use the $( ... ) construct for command
substitution
t7408-submodule-reference.sh: use the $( ... ) construct for command
substitution
t7504-commit-msg-hook.sh: use the $( ... ) construct for command
substitution
t7505-prepare-commit-msg-hook.sh: use the $( ... ) construct for
command substitution
t7602-merge-octopus-many.sh: use the $( ... ) construct for command
substitution
t7700-repack.sh: use the $( ... ) construct for command substitution
t8003-blame-corner-cases.sh: use the $( ... ) construct for command
substitution
t9001-send-email.sh: use the $( ... ) construct for command
substitution
t9101-git-svn-props.sh: use the $( ... ) construct for command
substitution
t9104-git-svn-follow-parent.sh: use the $( ... ) construct for
command substitution
t9105-git-svn-commit-diff.sh: use the $( ... ) construct for command
substitution
t9107-git-svn-migrate.sh: use the $( ... ) construct for command
substitution
t9108-git-svn-glob.sh: use the $( ... ) construct for command
substitution
t9109-git-svn-multi-glob.sh: use the $( ... ) construct for command
substitution
t9110-git-svn-use-svm-props.sh: use the $( ... ) construct for
command substitution
t9114-git-svn-dcommit-merge.sh: use the $( ... ) construct for
command substitution
t9118-git-svn-funky-branch-names.sh: use the $( ... ) construct for
command substitution
t9119-git-svn-info.sh: use the $( ... ) construct for command
substitution
t9129-git-svn-i18n-commitencoding.sh: use the $( ... ) construct for
command substitution
t9130-git-svn-authors-file.sh: use the $( ... ) construct for command
substitution
t9132-git-svn-broken-symlink.sh: use the $( ... ) construct for
command substitution
t9137-git-svn-dcommit-clobber-series.sh: use the $( ... ) construct
for command substitution
t9138-git-svn-authors-prog.sh: use the $( ... ) construct for command
substitution
t9145-git-svn-master-branch.sh: use the $( ... ) construct for
command substitution
t9150-svk-mergetickets.sh: use the $( ... ) construct for command
substitution
t9300-fast-import.sh: use the $( ... ) construct for command
substitution
t9350-fast-export.sh: use the $( ... ) construct for command
substitution
t9501-gitweb-standalone-http-status.sh: use the $( ... ) construct
for command substitution
t9901-git-web--browse.sh: use the $( ... ) construct for command
substitution
test-lib-functions.sh: use the $( ... ) construct for command
substitution
lib-credential.sh: use the $( ... ) construct for command
substitution
lib-cvs.sh: use the $( ... ) construct for command substitution
lib-gpg.sh: use the $( ... ) construct for command substitution
p5302-pack-index.sh: use the $( ... ) construct for command
substitution
howto-index.sh: use the $( ... ) construct for command substitution
install-webdoc.sh: use the $( ... ) construct for command
substitution
git-checkout.sh: use the $( ... ) construct for command substitution
git-clone.sh: use the $( ... ) construct for command substitution
git-commit.sh: use the $( ... ) construct for command substitution
git-fetch.sh: use the $( ... ) construct for command substitution
git-ls-remote.sh: use the $( ... ) construct for command substitution
git-merge.sh: use the $( ... ) construct for command substitution
git-repack.sh: use the $( ... ) construct for command substitution
git-resolve.sh: use the $( ... ) construct for command substitution
git-revert.sh: use the $( ... ) construct for command substitution
git-tag.sh: use the $( ... ) construct for command substitution
t9360-mw-to-git-clone.sh: use the $( ... ) construct for command
substitution
t9362-mw-to-git-utf8.sh: use the $( ... ) construct for command
substitution
t9365-continuing-queries.sh: use the $( ... ) construct for command
substitution
test-gitmw-lib.sh: use the $( ... ) construct for command
substitution
t7900-subtree.sh: use the $( ... ) construct for command substitution
appp.sh: use the $( ... ) construct for command substitution
txt-to-pot.sh: use the $( ... ) construct for command substitution
t9100-git-svn-basic.sh: use the $( ... ) construct for command
substitution
Documentation/howto-index.sh | 12 ++--
Documentation/install-webdoc.sh | 6 +-
check-builtins.sh | 4 +-
contrib/examples/git-checkout.sh | 8 +--
contrib/examples/git-clone.sh | 20 +++----
contrib/examples/git-commit.sh | 10 ++--
contrib/examples/git-fetch.sh | 6 +-
contrib/examples/git-ls-remote.sh | 4 +-
contrib/examples/git-merge.sh | 4 +-
contrib/examples/git-repack.sh | 2 +-
contrib/examples/git-resolve.sh | 2 +-
contrib/examples/git-revert.sh | 2 +-
contrib/examples/git-tag.sh | 2 +-
contrib/mw-to-git/t/t9360-mw-to-git-clone.sh | 14 ++---
contrib/mw-to-git/t/t9362-mw-to-git-utf8.sh | 4 +-
contrib/mw-to-git/t/t9365-continuing-queries.sh | 2 +-
contrib/mw-to-git/t/test-gitmw-lib.sh | 6 +-
contrib/subtree/t/t7900-subtree.sh | 2 +-
contrib/thunderbird-patch-inline/appp.sh | 14 ++---
git-am.sh | 30 +++++-----
git-gui/po/glossary/txt-to-pot.sh | 4 +-
git-pull.sh | 2 +-
git-rebase--merge.sh | 4 +-
git-rebase.sh | 8 +--
git-stash.sh | 2 +-
git-web--browse.sh | 6 +-
t/lib-credential.sh | 2 +-
t/lib-cvs.sh | 2 +-
t/lib-gpg.sh | 2 +-
t/perf/p5302-pack-index.sh | 2 +-
t/t0001-init.sh | 12 ++--
t/t0010-racy-git.sh | 4 +-
t/t0020-crlf.sh | 42 +++++++-------
t/t0025-crlf-auto.sh | 38 ++++++-------
t/t0026-eol-config.sh | 20 +++----
t/t0030-stripspace.sh | 20 +++----
t/t0204-gettext-reencode-sanity.sh | 2 +-
t/t0300-credentials.sh | 2 +-
t/t1000-read-tree-m-3way.sh | 4 +-
t/t1001-read-tree-m-2way.sh | 18 +++---
t/t1002-read-tree-m-u-2way.sh | 10 ++--
t/t1003-read-tree-prefix.sh | 2 +-
t/t1004-read-tree-m-u-wf.sh | 8 +--
t/t1020-subdirectory.sh | 22 ++++----
t/t1050-large.sh | 4 +-
t/t1100-commit-tree-options.sh | 4 +-
t/t1401-symbolic-ref.sh | 2 +-
t/t1410-reflog.sh | 24 ++++----
t/t1511-rev-parse-caret.sh | 4 +-
t/t1512-rev-parse-disambiguation.sh | 8 +--
t/t2102-update-index-symlinks.sh | 2 +-
t/t3030-merge-recursive.sh | 2 +-
t/t3100-ls-tree-restrict.sh | 2 +-
t/t3101-ls-tree-dirname.sh | 2 +-
t/t3210-pack-refs.sh | 2 +-
t/t3403-rebase-skip.sh | 2 +-
t/t3511-cherry-pick-x.sh | 14 ++---
t/t3600-rm.sh | 4 +-
t/t3700-add.sh | 16 +++---
t/t3905-stash-include-untracked.sh | 4 +-
t/t3910-mac-os-precompose.sh | 16 +++---
t/t4006-diff-mode.sh | 2 +-
t/t4010-diff-pathspec.sh | 4 +-
t/t4012-diff-binary.sh | 16 +++---
t/t4013-diff-various.sh | 6 +-
t/t4014-format-patch.sh | 10 ++--
t/t4036-format-patch-signer-mime.sh | 2 +-
t/t4038-diff-combined.sh | 2 +-
t/t4057-diff-combined-paths.sh | 2 +-
t/t4116-apply-reverse.sh | 12 ++--
t/t4119-apply-config.sh | 2 +-
t/t4204-patch-id.sh | 4 +-
t/t5000-tar-tree.sh | 6 +-
t/t5003-archive-zip.sh | 2 +-
t/t5100-mailinfo.sh | 12 ++--
t/t5300-pack-object.sh | 18 +++---
t/t5301-sliding-window.sh | 14 ++---
t/t5302-pack-index.sh | 34 ++++++------
t/t5303-pack-corruption-resilience.sh | 8 +--
t/t5304-prune.sh | 2 +-
t/t5305-include-tag.sh | 8 +--
t/t5500-fetch-pack.sh | 16 +++---
t/t5505-remote.sh | 2 +-
t/t5506-remote-groups.sh | 2 +-
t/t5510-fetch.sh | 10 ++--
t/t5515-fetch-merge-logic.sh | 4 +-
t/t5516-fetch-push.sh | 4 +-
t/t5517-push-mirror.sh | 2 +-
t/t5520-pull.sh | 10 ++--
t/t5522-pull-symlink.sh | 2 +-
t/t5530-upload-pack-error.sh | 2 +-
t/t5537-fetch-shallow.sh | 4 +-
t/t5538-push-shallow.sh | 4 +-
t/t5550-http-fetch-dumb.sh | 8 +--
t/t5551-http-fetch-smart.sh | 2 +-
t/t5570-git-daemon.sh | 8 +--
t/t5601-clone.sh | 2 +-
t/t5700-clone-reference.sh | 2 +-
t/t5710-info-alternate.sh | 2 +-
t/t5900-repo-selection.sh | 2 +-
t/t6001-rev-list-graft.sh | 12 ++--
t/t6002-rev-list-bisect.sh | 6 +-
t/t6015-rev-list-show-all-parents.sh | 6 +-
t/t6032-merge-large-rename.sh | 2 +-
t/t6034-merge-rename-nocruft.sh | 2 +-
t/t6111-rev-list-treesame.sh | 2 +-
t/t6132-pathspec-exclude.sh | 2 +-
t/t7001-mv.sh | 4 +-
t/t7003-filter-branch.sh | 6 +-
t/t7004-tag.sh | 16 +++---
t/t7006-pager.sh | 2 +-
t/t7103-reset-bare.sh | 2 +-
t/t7406-submodule-update.sh | 4 +-
t/t7408-submodule-reference.sh | 2 +-
t/t7504-commit-msg-hook.sh | 2 +-
t/t7505-prepare-commit-msg-hook.sh | 32 +++++------
t/t7602-merge-octopus-many.sh | 8 +--
t/t7700-repack.sh | 4 +-
t/t8003-blame-corner-cases.sh | 4 +-
t/t9001-send-email.sh | 10 ++--
t/t9100-git-svn-basic.sh | 24 ++++----
t/t9101-git-svn-props.sh | 30 +++++-----
t/t9104-git-svn-follow-parent.sh | 48 ++++++++--------
t/t9105-git-svn-commit-diff.sh | 4 +-
t/t9107-git-svn-migrate.sh | 16 +++---
t/t9108-git-svn-glob.sh | 20 +++----
t/t9109-git-svn-multi-glob.sh | 32 +++++------
t/t9110-git-svn-use-svm-props.sh | 2 +-
t/t9114-git-svn-dcommit-merge.sh | 12 ++--
t/t9118-git-svn-funky-branch-names.sh | 2 +-
t/t9119-git-svn-info.sh | 2 +-
t/t9129-git-svn-i18n-commitencoding.sh | 4 +-
t/t9130-git-svn-authors-file.sh | 12 ++--
t/t9132-git-svn-broken-symlink.sh | 4 +-
t/t9137-git-svn-dcommit-clobber-series.sh | 24 ++++----
t/t9138-git-svn-authors-prog.sh | 2 +-
t/t9145-git-svn-master-branch.sh | 4 +-
t/t9150-svk-mergetickets.sh | 2 +-
t/t9300-fast-import.sh | 68 +++++++++++------------
t/t9350-fast-export.sh | 6 +-
t/t9501-gitweb-standalone-http-status.sh | 6 +-
t/t9901-git-web--browse.sh | 2 +-
t/test-lib-functions.sh | 8 +--
unimplemented.sh | 2 +-
144 files changed, 611 insertions(+), 611 deletions(-)
--
1.7.10.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 000/144] Use the $( ... ) construct for command substitution instead of using the back-quotes
2014-03-24 16:56 [PATCH 000/144] Use the $( ... ) construct for command substitution instead of using the back-quotes Elia Pinto
@ 2014-03-25 16:20 ` Junio C Hamano
0 siblings, 0 replies; 3+ messages in thread
From: Junio C Hamano @ 2014-03-25 16:20 UTC (permalink / raw)
To: Elia Pinto; +Cc: git
Elia Pinto <gitter.spiros@gmail.com> writes:
> The patch is simple but involves a large number of files with different authors.
> Being simple I think it is wasteful to cc a large number of different people
> for doing a review.
We'd somehow need a way to parallelize the reviews, though. Being
simple is never an indication that the series is less likely to
contain bugs, and it often is an opposite. It is easier to slip
bugs in to a simple, repetitive and long patch.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-03-25 16:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-24 16:56 [PATCH 000/144] Use the $( ... ) construct for command substitution instead of using the back-quotes Elia Pinto
2014-03-25 16:20 ` Junio C Hamano
-- strict thread matches above, loose matches on Subject: below --
2014-03-25 8:24 Elia Pinto
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).