[SECURITY PATCH v2] git-prompt.sh: don't put unsanitized branch names in $PS1

[Richard Hansen <rhansen@bbn.com>]

Both bash and zsh subject the value of PS1 to parameter expansion,
command substitution, and arithmetic expansion.  Rather than include
the raw, unescaped branch name in PS1 when running in two- or
three-argument mode, construct PS1 to reference a variable that holds
the branch name.  Because the shells do not recursively expand, this
avoids arbitrary code execution by specially-crafted branch names such
as '$(IFS=_;cmd=sudo_rm_-rf_/;$cmd)'.

Signed-off-by: Richard Hansen <rhansen@bbn.com>
---
Changes since v1:  update t/t9903-bash-prompt.sh

 contrib/completion/git-prompt.sh | 34 +++++++++++++++++++++++++++++--
 t/t9903-bash-prompt.sh           | 44 ++++++++++++++++++++--------------------
 2 files changed, 54 insertions(+), 24 deletions(-)

diff --git a/contrib/completion/git-prompt.sh b/contrib/completion/git-prompt.sh
index 7b732d2..bd7ff29 100644
--- a/contrib/completion/git-prompt.sh
+++ b/contrib/completion/git-prompt.sh
@@ -207,7 +207,18 @@ __git_ps1_show_upstream ()
 			p=" u+${count#*	}-${count%	*}" ;;
 		esac
 		if [[ -n "$count" && -n "$name" ]]; then
-			p="$p $(git rev-parse --abbrev-ref "$upstream" 2>/dev/null)"
+			__git_ps1_upstream_name=$(git rev-parse \
+				--abbrev-ref "$upstream" 2>/dev/null)
+			if [ $pcmode = yes ]; then
+				# see the comments around the
+				# __git_ps1_branch_name variable below
+				p="$p \${__git_ps1_upstream_name}"
+			else
+				p="$p ${__git_ps1_upstream_name}"
+				# not needed anymore; keep user's
+				# environment clean
+				unset __git_ps1_upstream_name
+			fi
 		fi
 	fi
 
@@ -438,8 +449,27 @@ __git_ps1 ()
 		__git_ps1_colorize_gitstring
 	fi
 
+	b=${b##refs/heads/}
+	if [ $pcmode = yes ]; then
+		# In pcmode (and only pcmode) the contents of
+		# $gitstring are subject to expansion by the shell.
+		# Avoid putting the raw ref name in the prompt to
+		# protect the user from arbitrary code execution via
+		# specially crafted ref names (e.g., a ref named
+		# '$(IFS=_;cmd=sudo_rm_-rf_/;$cmd)' would execute
+		# 'sudo rm -rf /' when the prompt is drawn).  Instead,
+		# put the ref name in a new global variable (in the
+		# __git_ps1_* namespace to avoid colliding with the
+		# user's environment) and reference that variable from
+		# PS1.
+		__git_ps1_branch_name=$b
+		# note that the $ is escaped -- the variable will be
+		# expanded later (when it's time to draw the prompt)
+		b="\${__git_ps1_branch_name}"
+	fi
+
 	local f="$w$i$s$u"
-	local gitstring="$c${b##refs/heads/}${f:+$z$f}$r$p"
+	local gitstring="$c$b${f:+$z$f}$r$p"
 
 	if [ $pcmode = yes ]; then
 		if [ "${__git_printf_supports_v-}" != yes ]; then
diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh
index 59f875e..6efd0d9 100755
--- a/t/t9903-bash-prompt.sh
+++ b/t/t9903-bash-prompt.sh
@@ -452,53 +452,53 @@ test_expect_success 'prompt - format string starting with dash' '
 '
 
 test_expect_success 'prompt - pc mode' '
-	printf "BEFORE: (master):AFTER" >expected &&
+	printf "BEFORE: (\${__git_ps1_branch_name}):AFTER\\nmaster" >expected &&
 	printf "" >expected_output &&
 	(
 		__git_ps1 "BEFORE:" ":AFTER" >"$actual" &&
 		test_cmp expected_output "$actual" &&
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - bash color pc mode - branch name' '
-	printf "BEFORE: (${c_green}master${c_clear}):AFTER" >expected &&
+	printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear}):AFTER\\nmaster" >expected &&
 	(
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		__git_ps1 "BEFORE:" ":AFTER" >"$actual"
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - bash color pc mode - detached head' '
-	printf "BEFORE: (${c_red}(%s...)${c_clear}):AFTER" $(git log -1 --format="%h" b1^) >expected &&
+	printf "BEFORE: (${c_red}\${__git_ps1_branch_name}${c_clear}):AFTER\\n(%s...)" $(git log -1 --format="%h" b1^) >expected &&
 	git checkout b1^ &&
 	test_when_finished "git checkout master" &&
 	(
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		__git_ps1 "BEFORE:" ":AFTER" &&
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirty worktree' '
-	printf "BEFORE: (${c_green}master${c_clear} ${c_red}*${c_clear}):AFTER" >expected &&
+	printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_red}*${c_clear}):AFTER\\nmaster" >expected &&
 	echo "dirty" >file &&
 	test_when_finished "git reset --hard" &&
 	(
 		GIT_PS1_SHOWDIRTYSTATE=y &&
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		__git_ps1 "BEFORE:" ":AFTER" &&
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirty index' '
-	printf "BEFORE: (${c_green}master${c_clear} ${c_green}+${c_clear}):AFTER" >expected &&
+	printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_green}+${c_clear}):AFTER\\nmaster" >expected &&
 	echo "dirty" >file &&
 	test_when_finished "git reset --hard" &&
 	git add -u &&
@@ -506,13 +506,13 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirt
 		GIT_PS1_SHOWDIRTYSTATE=y &&
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		__git_ps1 "BEFORE:" ":AFTER" &&
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirty index and worktree' '
-	printf "BEFORE: (${c_green}master${c_clear} ${c_red}*${c_green}+${c_clear}):AFTER" >expected &&
+	printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_red}*${c_green}+${c_clear}):AFTER\\nmaster" >expected &&
 	echo "dirty index" >file &&
 	test_when_finished "git reset --hard" &&
 	git add -u &&
@@ -521,25 +521,25 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirt
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		GIT_PS1_SHOWDIRTYSTATE=y &&
 		__git_ps1 "BEFORE:" ":AFTER" &&
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - bash color pc mode - dirty status indicator - before root commit' '
-	printf "BEFORE: (${c_green}master${c_clear} ${c_green}#${c_clear}):AFTER" >expected &&
+	printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_green}#${c_clear}):AFTER\\nmaster" >expected &&
 	(
 		GIT_PS1_SHOWDIRTYSTATE=y &&
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		cd otherrepo &&
 		__git_ps1 "BEFORE:" ":AFTER" &&
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - bash color pc mode - inside .git directory' '
-	printf "BEFORE: (${c_green}GIT_DIR!${c_clear}):AFTER" >expected &&
+	printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear}):AFTER\\nGIT_DIR!" >expected &&
 	echo "dirty" >file &&
 	test_when_finished "git reset --hard" &&
 	(
@@ -547,13 +547,13 @@ test_expect_success 'prompt - bash color pc mode - inside .git directory' '
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		cd .git &&
 		__git_ps1 "BEFORE:" ":AFTER" &&
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - bash color pc mode - stash status indicator' '
-	printf "BEFORE: (${c_green}master${c_clear} ${c_lblue}\$${c_clear}):AFTER" >expected &&
+	printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_lblue}\$${c_clear}):AFTER\\nmaster" >expected &&
 	echo 2 >file &&
 	git stash &&
 	test_when_finished "git stash drop" &&
@@ -561,29 +561,29 @@ test_expect_success 'prompt - bash color pc mode - stash status indicator' '
 		GIT_PS1_SHOWSTASHSTATE=y &&
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		__git_ps1 "BEFORE:" ":AFTER" &&
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - bash color pc mode - untracked files status indicator' '
-	printf "BEFORE: (${c_green}master${c_clear} ${c_red}%%${c_clear}):AFTER" >expected &&
+	printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_red}%%${c_clear}):AFTER\\nmaster" >expected &&
 	(
 		GIT_PS1_SHOWUNTRACKEDFILES=y &&
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		__git_ps1 "BEFORE:" ":AFTER" &&
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
 
 test_expect_success 'prompt - zsh color pc mode' '
-	printf "BEFORE: (%%F{green}master%%f):AFTER" >expected &&
+	printf "BEFORE: (%%F{green}\${__git_ps1_branch_name}%%f):AFTER\\nmaster" >expected &&
 	(
 		ZSH_VERSION=5.0.0 &&
 		GIT_PS1_SHOWCOLORHINTS=y &&
 		__git_ps1 "BEFORE:" ":AFTER" >"$actual"
-		printf "%s" "$PS1" >"$actual"
+		printf "%s\\n%s" "$PS1" "${__git_ps1_branch_name}" >"$actual"
 	) &&
 	test_cmp expected "$actual"
 '
-- 
1.9.2