From: Stepan Kasal <kasal@ucw.cz>
To: GIT Mailing-list <git@vger.kernel.org>
Cc: msysGit <msysgit@googlegroups.com>, Karsten Blees <blees@dcon.de>,
Erik Faye-Lund <kusmabite@gmail.com>, Stepan Kasal <kasal@ucw.cz>
Subject: [PATCH 5/5] Win32 dirent: improve dirent implementation
Date: Fri, 6 Jun 2014 15:43:21 +0200 [thread overview]
Message-ID: <1402062201-9709-6-git-send-email-kasal@ucw.cz> (raw)
In-Reply-To: <1402062201-9709-1-git-send-email-kasal@ucw.cz>
From: Karsten Blees <blees@dcon.de>
Improve the dirent implementation by removing the relics that were once
necessary to plug into the now unused MinGW runtime, in preparation for
Unicode file name support.
Move FindFirstFile to opendir, and FindClose to closedir, with the
following implications:
- DIR.dd_name is no longer needed
- chdir(one); opendir(relative); chdir(two); readdir() works as expected
(i.e. lists one/relative instead of two/relative)
- DIR.dd_handle is a valid handle for the entire lifetime of the DIR struct
- thus, all checks for dd_handle == INVALID_HANDLE_VALUE and dd_handle == 0
have been removed
- the special case that the directory has been fully read (which was
previously explicitly tracked with dd_handle == INVALID_HANDLE_VALUE &&
dd_stat != 0) is now handled implicitly by the FindNextFile error
handling code (if a client continues to call readdir after receiving
NULL, FindNextFile will continue to fail with ERROR_NO_MORE_FILES, to
the same effect)
- extracting dirent data from WIN32_FIND_DATA is needed in two places, so
moved to its own method
- GetFileAttributes is no longer needed. The same information can be
obtained from the FindFirstFile error code, which is ERROR_DIRECTORY if
the name is NOT a directory (-> ENOTDIR), otherwise we can use
err_win_to_posix (e.g. ERROR_PATH_NOT_FOUND -> ENOENT). The
ERROR_DIRECTORY case could be fixed in err_win_to_posix, but this
probably breaks other functionality.
Removes the ERROR_NO_MORE_FILES check after FindFirstFile (this was
fortunately a NOOP (searching for '*' always finds '.' and '..'),
otherwise the subsequent code would have copied data from an uninitialized
buffer).
Changes malloc to git support function xmalloc, so opendir will die() if
out of memory, rather than failing with ENOMEM and letting git work on
incomplete directory listings (error handling in dir.c is quite sparse).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
---
compat/win32/dirent.c | 113 ++++++++++++++++++++++++--------------------------
1 file changed, 54 insertions(+), 59 deletions(-)
diff --git a/compat/win32/dirent.c b/compat/win32/dirent.c
index fac7f25..82a515c 100644
--- a/compat/win32/dirent.c
+++ b/compat/win32/dirent.c
@@ -4,92 +4,88 @@ struct DIR {
struct dirent dd_dir; /* includes d_type */
HANDLE dd_handle; /* FindFirstFile handle */
int dd_stat; /* 0-based index */
- char dd_name[1]; /* extend struct */
};
+static inline void finddata2dirent(struct dirent *ent, WIN32_FIND_DATAA *fdata)
+{
+ /* copy file name from WIN32_FIND_DATA to dirent */
+ memcpy(ent->d_name, fdata->cFileName, sizeof(ent->d_name));
+
+ /* Set file type, based on WIN32_FIND_DATA */
+ if (fdata->dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY)
+ ent->d_type = DT_DIR;
+ else
+ ent->d_type = DT_REG;
+}
+
DIR *opendir(const char *name)
{
- DWORD attrs = GetFileAttributesA(name);
+ char pattern[MAX_PATH];
+ WIN32_FIND_DATAA fdata;
+ HANDLE h;
int len;
- DIR *p;
+ DIR *dir;
- /* check for valid path */
- if (attrs == INVALID_FILE_ATTRIBUTES) {
- errno = ENOENT;
+ /* check that name is not NULL */
+ if (!name) {
+ errno = EINVAL;
return NULL;
}
-
- /* check if it's a directory */
- if (!(attrs & FILE_ATTRIBUTE_DIRECTORY)) {
- errno = ENOTDIR;
- return NULL;
- }
-
/* check that the pattern won't be too long for FindFirstFileA */
len = strlen(name);
- if (is_dir_sep(name[len - 1]))
- len--;
if (len + 2 >= MAX_PATH) {
errno = ENAMETOOLONG;
return NULL;
}
-
- p = malloc(sizeof(DIR) + len + 2);
- if (!p)
+ /* copy name to temp buffer */
+ memcpy(pattern, name, len + 1);
+
+ /* append optional '/' and wildcard '*' */
+ if (len && !is_dir_sep(pattern[len - 1]))
+ pattern[len++] = '/';
+ pattern[len++] = '*';
+ pattern[len] = 0;
+
+ /* open find handle */
+ h = FindFirstFileA(pattern, &fdata);
+ if (h == INVALID_HANDLE_VALUE) {
+ DWORD err = GetLastError();
+ errno = (err == ERROR_DIRECTORY) ? ENOTDIR : err_win_to_posix(err);
return NULL;
+ }
- memset(p, 0, sizeof(DIR) + len + 2);
- strcpy(p->dd_name, name);
- p->dd_name[len] = '/';
- p->dd_name[len+1] = '*';
-
- p->dd_handle = INVALID_HANDLE_VALUE;
- return p;
+ /* initialize DIR structure and copy first dir entry */
+ dir = xmalloc(sizeof(DIR));
+ dir->dd_handle = h;
+ dir->dd_stat = 0;
+ finddata2dirent(&dir->dd_dir, &fdata);
+ return dir;
}
struct dirent *readdir(DIR *dir)
{
- WIN32_FIND_DATAA buf;
- HANDLE handle;
-
- if (!dir || !dir->dd_handle) {
+ if (!dir) {
errno = EBADF; /* No set_errno for mingw */
return NULL;
}
- if (dir->dd_handle == INVALID_HANDLE_VALUE && dir->dd_stat == 0) {
- DWORD lasterr;
- handle = FindFirstFileA(dir->dd_name, &buf);
- lasterr = GetLastError();
- dir->dd_handle = handle;
- if (handle == INVALID_HANDLE_VALUE && (lasterr != ERROR_NO_MORE_FILES)) {
- errno = err_win_to_posix(lasterr);
+ /* if first entry, dirent has already been set up by opendir */
+ if (dir->dd_stat) {
+ /* get next entry and convert from WIN32_FIND_DATA to dirent */
+ WIN32_FIND_DATAA fdata;
+ if (FindNextFileA(dir->dd_handle, &fdata)) {
+ finddata2dirent(&dir->dd_dir, &fdata);
+ } else {
+ DWORD lasterr = GetLastError();
+ /* POSIX says you shouldn't set errno when readdir can't
+ find any more files; so, if another error we leave it set. */
+ if (lasterr != ERROR_NO_MORE_FILES)
+ errno = err_win_to_posix(lasterr);
return NULL;
}
- } else if (dir->dd_handle == INVALID_HANDLE_VALUE) {
- return NULL;
- } else if (!FindNextFileA(dir->dd_handle, &buf)) {
- DWORD lasterr = GetLastError();
- FindClose(dir->dd_handle);
- dir->dd_handle = INVALID_HANDLE_VALUE;
- /* POSIX says you shouldn't set errno when readdir can't
- find any more files; so, if another error we leave it set. */
- if (lasterr != ERROR_NO_MORE_FILES)
- errno = err_win_to_posix(lasterr);
- return NULL;
}
- /* We get here if `buf' contains valid data. */
- strcpy(dir->dd_dir.d_name, buf.cFileName);
++dir->dd_stat;
-
- /* Set file type, based on WIN32_FIND_DATA */
- dir->dd_dir.d_type = 0;
- if (buf.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY)
- dir->dd_dir.d_type |= DT_DIR;
- else
- dir->dd_dir.d_type |= DT_REG;
-
return &dir->dd_dir;
}
@@ -100,8 +96,7 @@ int closedir(DIR *dir)
return -1;
}
- if (dir->dd_handle != INVALID_HANDLE_VALUE)
- FindClose(dir->dd_handle);
+ FindClose(dir->dd_handle);
free(dir);
return 0;
}
--
2.0.0.9635.g0be03cb
--
--
*** Please reply-to-all at all times ***
*** (do not pretend to know who is subscribed and who is not) ***
*** Please avoid top-posting. ***
The msysGit Wiki is here: https://github.com/msysgit/msysgit/wiki - Github accounts are free.
You received this message because you are subscribed to the Google
Groups "msysGit" group.
To post to this group, send email to msysgit@googlegroups.com
To unsubscribe from this group, send email to
msysgit+unsubscribe@googlegroups.com
For more options, and view previous threads, visit this group at
http://groups.google.com/group/msysgit?hl=en_US?hl=en
---
You received this message because you are subscribed to the Google Groups "msysGit" group.
To unsubscribe from this group and stop receiving emails from it, send an email to msysgit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2014-06-06 13:43 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-06 13:43 [PATCH 0/5] Windows dirent patches Stepan Kasal
2014-06-06 13:43 ` [PATCH 1/5] Win32 dirent: remove unused dirent.d_ino member Stepan Kasal
2014-06-06 13:43 ` [PATCH 2/5] Win32 dirent: remove unused dirent.d_reclen member Stepan Kasal
2014-06-06 13:43 ` [PATCH 3/5] Win32 dirent: change FILENAME_MAX to MAX_PATH Stepan Kasal
2014-06-06 13:43 ` [PATCH 4/5] Win32 dirent: clarify #include directives Stepan Kasal
2014-06-06 13:43 ` Stepan Kasal [this message]
2014-06-06 16:33 ` [PATCH 0/5] Windows dirent patches Karsten Blees
2014-06-06 20:15 ` Stepan Kasal
2014-06-06 20:15 ` [PATCH 1/5] Win32 dirent: remove unused dirent.d_ino member Stepan Kasal
2014-06-06 20:15 ` [PATCH 2/5] Win32 dirent: remove unused dirent.d_reclen member Stepan Kasal
2014-06-06 20:15 ` [PATCH 3/5] Win32 dirent: change FILENAME_MAX to MAX_PATH Stepan Kasal
2014-06-06 20:15 ` [PATCH 4/5] Win32 dirent: clarify #include directives Stepan Kasal
2014-06-06 20:15 ` [PATCH 5/5] Win32 dirent: improve dirent implementation Stepan Kasal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402062201-9709-6-git-send-email-kasal@ucw.cz \
--to=kasal@ucw.cz \
--cc=blees@dcon.de \
--cc=git@vger.kernel.org \
--cc=kusmabite@gmail.com \
--cc=msysgit@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).