From: "Nguyễn Thái Ngọc Duy" <pclouds@gmail.com>
To: git@vger.kernel.org
Cc: "Junio C Hamano" <gitster@pobox.com>,
"Jonathan Niedier" <jrnieder@gmail.com>,
dturner@twopensource.com,
"Nguyễn Thái Ngọc Duy" <pclouds@gmail.com>
Subject: [PATCH] Fix "t0001: test git init when run via an alias"
Date: Sun, 8 Jun 2014 16:37:10 +0700 [thread overview]
Message-ID: <1402220230-799-1-git-send-email-pclouds@gmail.com> (raw)
In-Reply-To: <20140606110935.GA14446@lanh>
Commit 4ad8332 (t0001: test git init when run via an alias -
2010-11-26) noted breakages when running init via alias. The problem
is for alias to be used, $GIT_DIR must be searched, but 'init' and
'clone' are not happy with that. So we start a new process like an
external command, with clean environment in this case. Env variables
that are set by command line (e.g. "git --git-dir=.. ") are kept.
This should also fix autocorrecting a command typo to "init" because
it's the same problem: aliases are read, then "init" is unhappy with
$GIT_DIR already set up because of that.
Reminded-by: David Turner <dturner@twopensource.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
---
git.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++----
t/t0001-init.sh | 4 ++--
2 files changed, 50 insertions(+), 6 deletions(-)
diff --git a/git.c b/git.c
index 7780572..d1e49da 100644
--- a/git.c
+++ b/git.c
@@ -20,6 +20,42 @@ const char git_more_info_string[] =
static struct startup_info git_startup_info;
static int use_pager = -1;
+static char orig_cwd[PATH_MAX];
+static const char *env_names[] = {
+ GIT_DIR_ENVIRONMENT,
+ GIT_WORK_TREE_ENVIRONMENT,
+ GIT_IMPLICIT_WORK_TREE_ENVIRONMENT,
+ GIT_PREFIX_ENVIRONMENT
+};
+static char *orig_env[4];
+static int saved_environment;
+
+static void save_env(void)
+{
+ int i;
+ if (saved_environment)
+ return;
+ saved_environment = 1;
+ getcwd(orig_cwd, sizeof(orig_cwd));
+ for (i = 0; i < ARRAY_SIZE(env_names); i++) {
+ orig_env[i] = getenv(env_names[i]);
+ if (orig_env[i])
+ orig_env[i] = xstrdup(orig_env[i]);
+ }
+}
+
+static void restore_env(void)
+{
+ int i;
+ if (*orig_cwd && chdir(orig_cwd))
+ die_errno("could not move to %s", orig_cwd);
+ for (i = 0; i < ARRAY_SIZE(env_names); i++) {
+ if (orig_env[i])
+ setenv(env_names[i], orig_env[i], 1);
+ else
+ unsetenv(env_names[i]);
+ }
+}
static void commit_pager_choice(void) {
switch (use_pager) {
@@ -272,6 +308,7 @@ static int handle_alias(int *argcp, const char ***argv)
* RUN_SETUP for reading from the configuration file.
*/
#define NEED_WORK_TREE (1<<3)
+#define NO_SETUP (1<<4)
struct cmd_struct {
const char *cmd;
@@ -352,7 +389,7 @@ static struct cmd_struct commands[] = {
{ "cherry", cmd_cherry, RUN_SETUP },
{ "cherry-pick", cmd_cherry_pick, RUN_SETUP | NEED_WORK_TREE },
{ "clean", cmd_clean, RUN_SETUP | NEED_WORK_TREE },
- { "clone", cmd_clone },
+ { "clone", cmd_clone, NO_SETUP },
{ "column", cmd_column, RUN_SETUP_GENTLY },
{ "commit", cmd_commit, RUN_SETUP | NEED_WORK_TREE },
{ "commit-tree", cmd_commit_tree, RUN_SETUP },
@@ -378,8 +415,8 @@ static struct cmd_struct commands[] = {
{ "hash-object", cmd_hash_object },
{ "help", cmd_help },
{ "index-pack", cmd_index_pack, RUN_SETUP_GENTLY },
- { "init", cmd_init_db },
- { "init-db", cmd_init_db },
+ { "init", cmd_init_db, NO_SETUP },
+ { "init-db", cmd_init_db, NO_SETUP },
{ "log", cmd_log, RUN_SETUP },
{ "ls-files", cmd_ls_files, RUN_SETUP },
{ "ls-remote", cmd_ls_remote, RUN_SETUP_GENTLY },
@@ -484,6 +521,10 @@ static void handle_builtin(int argc, const char **argv)
struct cmd_struct *p = commands+i;
if (strcmp(p->cmd, cmd))
continue;
+ if (saved_environment && (p->option & NO_SETUP)) {
+ restore_env();
+ break;
+ }
exit(run_builtin(p, argc, argv));
}
}
@@ -539,7 +580,10 @@ static int run_argv(int *argcp, const char ***argv)
* of overriding "git log" with "git show" by having
* alias.log = show
*/
- if (done_alias || !handle_alias(argcp, argv))
+ if (done_alias)
+ break;
+ save_env();
+ if (!handle_alias(argcp, argv))
break;
done_alias = 1;
}
diff --git a/t/t0001-init.sh b/t/t0001-init.sh
index 2f30203..e62c0ff 100755
--- a/t/t0001-init.sh
+++ b/t/t0001-init.sh
@@ -56,7 +56,7 @@ test_expect_success 'plain through aliased command, outside any git repo' '
check_config plain-aliased/.git false unset
'
-test_expect_failure 'plain nested through aliased command' '
+test_expect_success 'plain nested through aliased command' '
(
git init plain-ancestor-aliased &&
cd plain-ancestor-aliased &&
@@ -68,7 +68,7 @@ test_expect_failure 'plain nested through aliased command' '
check_config plain-ancestor-aliased/plain-nested/.git false unset
'
-test_expect_failure 'plain nested in bare through aliased command' '
+test_expect_success 'plain nested in bare through aliased command' '
(
git init --bare bare-ancestor-aliased.git &&
cd bare-ancestor-aliased.git &&
--
1.9.1.346.ga2b5940
next prev parent reply other threads:[~2014-06-08 9:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-05 3:49 Git autocorrect bug David Turner
2014-06-05 6:06 ` Øystein Walle
2014-06-05 6:10 ` Øystein Walle
2014-06-05 6:29 ` Duy Nguyen
2014-06-05 8:28 ` David Turner
2014-06-06 11:09 ` Duy Nguyen
2014-06-08 9:37 ` Nguyễn Thái Ngọc Duy [this message]
2014-06-10 18:48 ` [PATCH] Fix "t0001: test git init when run via an alias" Junio C Hamano
2014-06-11 10:57 ` Duy Nguyen
2014-06-12 17:11 ` Junio C Hamano
2014-06-10 18:53 ` Junio C Hamano
2014-06-10 19:09 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402220230-799-1-git-send-email-pclouds@gmail.com \
--to=pclouds@gmail.com \
--cc=dturner@twopensource.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=jrnieder@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).