From: Paul Tan <pyokagan@gmail.com>
To: git@vger.kernel.org
Cc: Johannes Schindelin <johannes.schindelin@gmx.de>,
Stefan Beller <sbeller@google.com>, Paul Tan <pyokagan@gmail.com>
Subject: [PATCH v6 20/45] builtin-am: implement --3way, am.threeWay
Date: Mon, 20 Jul 2015 00:10:12 +0800 [thread overview]
Message-ID: <1437322237-29863-21-git-send-email-pyokagan@gmail.com> (raw)
In-Reply-To: <1437322237-29863-1-git-send-email-pyokagan@gmail.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh supported the --3way option, and if set, would attempt to do a
3-way merge if the initial patch application fails.
Since d96a275 (git-am: add am.threeWay config variable, 2015-06-04), the
setting am.threeWay configures if the --3way option is set by default.
Since 5d86861 (am -3: list the paths that needed 3-way fallback,
2012-03-28), in a 3-way merge git-am.sh would list the paths that needed
3-way fallback, so that the user can review them more carefully to spot
mismerges.
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
---
builtin/am.c | 156 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 152 insertions(+), 4 deletions(-)
diff --git a/builtin/am.c b/builtin/am.c
index 7c0f604..7237fff 100644
--- a/builtin/am.c
+++ b/builtin/am.c
@@ -19,6 +19,8 @@
#include "unpack-trees.h"
#include "branch.h"
#include "sequencer.h"
+#include "revision.h"
+#include "merge-recursive.h"
/**
* Returns 1 if the file is empty or does not exist, 0 otherwise.
@@ -83,6 +85,7 @@ struct am_state {
int prec;
/* various operating modes and command line options */
+ int threeway;
int quiet;
int append_signoff;
const char *resolvemsg;
@@ -100,6 +103,8 @@ static void am_state_init(struct am_state *state, const char *dir)
state->dir = xstrdup(dir);
state->prec = 4;
+
+ git_config_get_bool("am.threeway", &state->threeway);
}
/**
@@ -352,6 +357,9 @@ static void am_load(struct am_state *state)
read_commit_msg(state);
+ read_state_file(&sb, state, "threeway", 1);
+ state->threeway = !strcmp(sb.buf, "t");
+
read_state_file(&sb, state, "quiet", 1);
state->quiet = !strcmp(sb.buf, "t");
@@ -536,6 +544,8 @@ static void am_setup(struct am_state *state, enum patch_format patch_format,
die(_("Failed to split patches."));
}
+ write_file(am_path(state, "threeway"), 1, state->threeway ? "t" : "f");
+
write_file(am_path(state, "quiet"), 1, state->quiet ? "t" : "f");
write_file(am_path(state, "sign"), 1, state->append_signoff ? "t" : "f");
@@ -766,16 +776,34 @@ finish:
}
/**
- * Applies current patch with git-apply. Returns 0 on success, -1 otherwise.
+ * Applies current patch with git-apply. Returns 0 on success, -1 otherwise. If
+ * `index_file` is not NULL, the patch will be applied to that index.
*/
-static int run_apply(const struct am_state *state)
+static int run_apply(const struct am_state *state, const char *index_file)
{
struct child_process cp = CHILD_PROCESS_INIT;
cp.git_cmd = 1;
+ if (index_file)
+ argv_array_pushf(&cp.env_array, "GIT_INDEX_FILE=%s", index_file);
+
+ /*
+ * If we are allowed to fall back on 3-way merge, don't give false
+ * errors during the initial attempt.
+ */
+ if (state->threeway && !index_file) {
+ cp.no_stdout = 1;
+ cp.no_stderr = 1;
+ }
+
argv_array_push(&cp.args, "apply");
- argv_array_push(&cp.args, "--index");
+
+ if (index_file)
+ argv_array_push(&cp.args, "--cached");
+ else
+ argv_array_push(&cp.args, "--index");
+
argv_array_push(&cp.args, am_path(state, "patch"));
if (run_command(&cp))
@@ -783,8 +811,106 @@ static int run_apply(const struct am_state *state)
/* Reload index as git-apply will have modified it. */
discard_cache();
+ read_cache_from(index_file ? index_file : get_index_file());
+
+ return 0;
+}
+
+/**
+ * Builds an index that contains just the blobs needed for a 3way merge.
+ */
+static int build_fake_ancestor(const struct am_state *state, const char *index_file)
+{
+ struct child_process cp = CHILD_PROCESS_INIT;
+
+ cp.git_cmd = 1;
+ argv_array_push(&cp.args, "apply");
+ argv_array_pushf(&cp.args, "--build-fake-ancestor=%s", index_file);
+ argv_array_push(&cp.args, am_path(state, "patch"));
+
+ if (run_command(&cp))
+ return -1;
+
+ return 0;
+}
+
+/**
+ * Attempt a threeway merge, using index_path as the temporary index.
+ */
+static int fall_back_threeway(const struct am_state *state, const char *index_path)
+{
+ unsigned char orig_tree[GIT_SHA1_RAWSZ], his_tree[GIT_SHA1_RAWSZ],
+ our_tree[GIT_SHA1_RAWSZ];
+ const unsigned char *bases[1] = {orig_tree};
+ struct merge_options o;
+ struct commit *result;
+ char *his_tree_name;
+
+ if (get_sha1("HEAD", our_tree) < 0)
+ hashcpy(our_tree, EMPTY_TREE_SHA1_BIN);
+
+ if (build_fake_ancestor(state, index_path))
+ return error("could not build fake ancestor");
+
+ discard_cache();
+ read_cache_from(index_path);
+
+ if (write_index_as_tree(orig_tree, &the_index, index_path, 0, NULL))
+ return error(_("Repository lacks necessary blobs to fall back on 3-way merge."));
+
+ say(state, stdout, _("Using index info to reconstruct a base tree..."));
+
+ if (!state->quiet) {
+ /*
+ * List paths that needed 3-way fallback, so that the user can
+ * review them with extra care to spot mismerges.
+ */
+ struct rev_info rev_info;
+ const char *diff_filter_str = "--diff-filter=AM";
+
+ init_revisions(&rev_info, NULL);
+ rev_info.diffopt.output_format = DIFF_FORMAT_NAME_STATUS;
+ diff_opt_parse(&rev_info.diffopt, &diff_filter_str, 1);
+ add_pending_sha1(&rev_info, "HEAD", our_tree, 0);
+ diff_setup_done(&rev_info.diffopt);
+ run_diff_index(&rev_info, 1);
+ }
+
+ if (run_apply(state, index_path))
+ return error(_("Did you hand edit your patch?\n"
+ "It does not apply to blobs recorded in its index."));
+
+ if (write_index_as_tree(his_tree, &the_index, index_path, 0, NULL))
+ return error("could not write tree");
+
+ say(state, stdout, _("Falling back to patching base and 3-way merge..."));
+
+ discard_cache();
read_cache();
+ /*
+ * This is not so wrong. Depending on which base we picked, orig_tree
+ * may be wildly different from ours, but his_tree has the same set of
+ * wildly different changes in parts the patch did not touch, so
+ * recursive ends up canceling them, saying that we reverted all those
+ * changes.
+ */
+
+ init_merge_options(&o);
+
+ o.branch1 = "HEAD";
+ his_tree_name = xstrfmt("%.*s", linelen(state->msg), state->msg);
+ o.branch2 = his_tree_name;
+
+ if (state->quiet)
+ o.verbosity = 0;
+
+ if (merge_recursive_generic(&o, our_tree, his_tree, 1, bases, &result)) {
+ free(his_tree_name);
+ return error(_("Failed to merge in the changes."));
+ }
+
+ free(his_tree_name);
return 0;
}
@@ -872,6 +998,7 @@ static void am_run(struct am_state *state, int resume)
while (state->cur <= state->last) {
const char *mail = am_path(state, msgnum(state));
+ int apply_status;
if (!file_exists(mail))
goto next;
@@ -889,7 +1016,26 @@ static void am_run(struct am_state *state, int resume)
say(state, stdout, _("Applying: %.*s"), linelen(state->msg), state->msg);
- if (run_apply(state) < 0) {
+ apply_status = run_apply(state, NULL);
+
+ if (apply_status && state->threeway) {
+ struct strbuf sb = STRBUF_INIT;
+
+ strbuf_addstr(&sb, am_path(state, "patch-merge-index"));
+ apply_status = fall_back_threeway(state, sb.buf);
+ strbuf_release(&sb);
+
+ /*
+ * Applying the patch to an earlier tree and merging
+ * the result may have produced the same tree as ours.
+ */
+ if (!apply_status && !index_has_changes(NULL)) {
+ say(state, stdout, _("No changes -- Patch already applied."));
+ goto next;
+ }
+ }
+
+ if (apply_status) {
int advice_amworkdir = 1;
printf_ln(_("Patch failed at %s %.*s"), msgnum(state),
@@ -1158,6 +1304,8 @@ int cmd_am(int argc, const char **argv, const char *prefix)
};
struct option options[] = {
+ OPT_BOOL('3', "3way", &state.threeway,
+ N_("allow fall back on 3way merging if needed")),
OPT__QUIET(&state.quiet, N_("be quiet")),
OPT_BOOL('s', "signoff", &state.append_signoff,
N_("add a Signed-off-by line to the commit message")),
--
2.5.0.rc2.110.gb39b692
next prev parent reply other threads:[~2015-07-19 16:11 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-19 16:09 [PATCH v6 00/45] Make git-am a builtin Paul Tan
2015-07-19 16:09 ` [PATCH v6 01/45] wrapper: implement xopen() Paul Tan
2015-07-19 16:09 ` [PATCH v6 02/45] wrapper: implement xfopen() Paul Tan
2015-07-19 16:09 ` [PATCH v6 03/45] builtin-am: implement skeletal builtin am Paul Tan
2015-07-19 16:09 ` [PATCH v6 04/45] builtin-am: implement patch queue mechanism Paul Tan
2015-07-19 16:09 ` [PATCH v6 05/45] builtin-am: split out mbox/maildir patches with git-mailsplit Paul Tan
2015-07-19 16:09 ` [PATCH v6 06/45] builtin-am: auto-detect mbox patches Paul Tan
2015-07-19 16:09 ` [PATCH v6 07/45] builtin-am: extract patch and commit info with git-mailinfo Paul Tan
2015-07-19 16:10 ` [PATCH v6 08/45] builtin-am: apply patch with git-apply Paul Tan
2015-07-19 16:10 ` [PATCH v6 09/45] builtin-am: implement committing applied patch Paul Tan
2015-07-19 16:10 ` [PATCH v6 10/45] builtin-am: refuse to apply patches if index is dirty Paul Tan
2015-07-19 16:10 ` [PATCH v6 11/45] builtin-am: implement --resolved/--continue Paul Tan
2015-07-19 16:10 ` [PATCH v6 12/45] builtin-am: don't parse mail when resuming Paul Tan
2015-07-19 16:10 ` [PATCH v6 13/45] builtin-am: implement --skip Paul Tan
2015-07-19 16:10 ` [PATCH v6 14/45] builtin-am: implement --abort Paul Tan
2015-07-31 23:42 ` Stefan Beller
2015-07-19 16:10 ` [PATCH v6 15/45] builtin-am: reject patches when there's a session in progress Paul Tan
2015-07-19 16:10 ` [PATCH v6 16/45] builtin-am: implement -q/--quiet Paul Tan
2015-07-19 16:10 ` [PATCH v6 17/45] builtin-am: exit with user friendly message on failure Paul Tan
2015-07-19 16:10 ` [PATCH v6 18/45] builtin-am: implement -s/--signoff Paul Tan
2015-07-19 16:10 ` [PATCH v6 19/45] cache-tree: introduce write_index_as_tree() Paul Tan
2015-07-19 16:10 ` Paul Tan [this message]
2015-07-19 16:10 ` [PATCH v6 21/45] builtin-am: implement --rebasing mode Paul Tan
2015-07-19 16:10 ` [PATCH v6 22/45] builtin-am: bypass git-mailinfo when --rebasing Paul Tan
2015-07-19 16:10 ` [PATCH v6 23/45] builtin-am: handle stray state directory Paul Tan
2015-07-19 16:10 ` [PATCH v6 24/45] builtin-am: implement -u/--utf8 Paul Tan
2015-07-19 16:10 ` [PATCH v6 25/45] builtin-am: implement -k/--keep, --keep-non-patch Paul Tan
2015-07-19 16:10 ` [PATCH v6 26/45] builtin-am: implement --[no-]message-id, am.messageid Paul Tan
2015-07-19 16:10 ` [PATCH v6 27/45] builtin-am: support --keep-cr, am.keepcr Paul Tan
2015-07-19 16:10 ` [PATCH v6 28/45] builtin-am: implement --[no-]scissors Paul Tan
2015-07-19 16:10 ` [PATCH v6 29/45] builtin-am: pass git-apply's options to git-apply Paul Tan
2015-07-19 16:10 ` [PATCH v6 30/45] builtin-am: implement --ignore-date Paul Tan
2015-07-19 16:10 ` [PATCH v6 31/45] builtin-am: implement --committer-date-is-author-date Paul Tan
2015-07-19 16:10 ` [PATCH v6 32/45] builtin-am: implement -S/--gpg-sign, commit.gpgsign Paul Tan
2015-07-19 16:10 ` [PATCH v6 33/45] builtin-am: invoke post-rewrite hook Paul Tan
2015-07-19 16:10 ` [PATCH v6 34/45] builtin-am: support automatic notes copying Paul Tan
2015-07-19 16:10 ` [PATCH v6 35/45] builtin-am: invoke applypatch-msg hook Paul Tan
2015-07-19 16:10 ` [PATCH v6 36/45] builtin-am: invoke pre-applypatch hook Paul Tan
2015-07-19 16:10 ` [PATCH v6 37/45] builtin-am: invoke post-applypatch hook Paul Tan
2015-07-19 16:10 ` [PATCH v6 38/45] builtin-am: rerere support Paul Tan
2015-07-19 16:10 ` [PATCH v6 39/45] builtin-am: support and auto-detect StGit patches Paul Tan
2015-07-19 16:10 ` [PATCH v6 40/45] builtin-am: support and auto-detect StGit series files Paul Tan
2015-07-19 16:10 ` [PATCH v6 41/45] builtin-am: support and auto-detect mercurial patches Paul Tan
2015-07-19 16:10 ` [PATCH v6 42/45] builtin-am: implement -i/--interactive Paul Tan
2015-07-19 16:10 ` [PATCH v6 43/45] builtin-am: implement legacy -b/--binary option Paul Tan
2015-07-19 16:10 ` [PATCH v6 44/45] builtin-am: check for valid committer ident Paul Tan
2015-07-19 16:10 ` [PATCH v6 45/45] builtin-am: remove redirection to git-am.sh Paul Tan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437322237-29863-21-git-send-email-pyokagan@gmail.com \
--to=pyokagan@gmail.com \
--cc=git@vger.kernel.org \
--cc=johannes.schindelin@gmx.de \
--cc=sbeller@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).