* [PATCH v2] t/gitweb-lib: Don't pass constant to decode_utf8
@ 2010-10-20 5:57 Brian Gernhardt
2010-10-20 19:05 ` Jakub Narebski
0 siblings, 1 reply; 5+ messages in thread
From: Brian Gernhardt @ 2010-10-20 5:57 UTC (permalink / raw)
To: Git List; +Cc: Jakub Narebski, Sven Verdoolaege, Junio C Hamano
Encode.pm started updating the string to decode in-place when a second
argument is passed in version 2.40. This causes 'decode_utf8("",
Encode::FB_CROAK)' to die with a message like:
Modification of a read-only value attempted at
/Library/Perl/Updates/5.10.0/darwin-thread-multi-2level/Encode.pm line
216.
Work around this by passing an empty variable instead of a constant
string.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
---
Changes since v1:
- Use an explicitly empty variable instead of $_
- Clearer commit message
- CC people who worked on t/gitweb-lib.sh
- based against maint
t/gitweb-lib.sh | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh
index 81ef2a0..1b9523d 100644
--- a/t/gitweb-lib.sh
+++ b/t/gitweb-lib.sh
@@ -80,7 +80,7 @@ if ! test_have_prereq PERL; then
test_done
fi
-perl -MEncode -e 'decode_utf8("", Encode::FB_CROAK)' >/dev/null 2>&1 || {
+perl -MEncode -e '$e="";decode_utf8($e, Encode::FB_CROAK)' >/dev/null 2>&1 || {
skip_all='skipping gitweb tests, perl version is too old'
test_done
}
--
1.7.3.1.209.g52408
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2] t/gitweb-lib: Don't pass constant to decode_utf8
2010-10-20 5:57 [PATCH v2] t/gitweb-lib: Don't pass constant to decode_utf8 Brian Gernhardt
@ 2010-10-20 19:05 ` Jakub Narebski
2010-10-20 22:13 ` Brian Gernhardt
2010-10-20 23:07 ` [PATCH v3 (maint)] " Brian Gernhardt
0 siblings, 2 replies; 5+ messages in thread
From: Jakub Narebski @ 2010-10-20 19:05 UTC (permalink / raw)
To: Brian Gernhardt; +Cc: Git List, Sven Verdoolaege, Junio C Hamano
On Wed, 20 Oct 2010, Brian Gernhardt wrote:
> Encode.pm started updating the string to decode in-place when a second
> argument is passed in version 2.40. This causes 'decode_utf8("",
> Encode::FB_CROAK)' to die with a message like:
Very minor complaint: line break here makes it less readable.
Perhaps this?
Encode.pm started updating the string to decode in-place when a second argument
is passed in version 2.40. This causes 'decode_utf8("", Encode::FB_CROAK)' to
die with a message like:
>
> Modification of a read-only value attempted at
> /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level/Encode.pm line
> 216.
Very minor complaint: It might be better to not include path to installed
Encode.pm, which is different on different filesystems.
Modification of a read-only value attempted at .../Encode.pm line
216.
>
> Work around this by passing an empty variable instead of a constant
> string.
>
> Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
> ---
>
> Changes since v1:
> - Use an explicitly empty variable instead of $_
...which was undefined, not empty, I think.
> - Clearer commit message
It is very clear (though I don't remember previous one).
> - CC people who worked on t/gitweb-lib.sh
Thanks a lot.
> - based against maint
Was there any difference versus being based against 'master'?
>
> t/gitweb-lib.sh | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh
> index 81ef2a0..1b9523d 100644
> --- a/t/gitweb-lib.sh
> +++ b/t/gitweb-lib.sh
> @@ -80,7 +80,7 @@ if ! test_have_prereq PERL; then
> test_done
> fi
>
> -perl -MEncode -e 'decode_utf8("", Encode::FB_CROAK)' >/dev/null 2>&1 || {
> +perl -MEncode -e '$e="";decode_utf8($e, Encode::FB_CROAK)' >/dev/null 2>&1 || {
> skip_all='skipping gitweb tests, perl version is too old'
> test_done
> }
Nicely done! Thanks!
--
Jakub Narebski
Poland
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] t/gitweb-lib: Don't pass constant to decode_utf8
2010-10-20 19:05 ` Jakub Narebski
@ 2010-10-20 22:13 ` Brian Gernhardt
2010-10-20 22:28 ` Jakub Narebski
2010-10-20 23:07 ` [PATCH v3 (maint)] " Brian Gernhardt
1 sibling, 1 reply; 5+ messages in thread
From: Brian Gernhardt @ 2010-10-20 22:13 UTC (permalink / raw)
To: Jakub Narebski; +Cc: Git List, Sven Verdoolaege, Junio C Hamano
On Oct 20, 2010, at 3:05 PM, Jakub Narebski wrote:
> On Wed, 20 Oct 2010, Brian Gernhardt wrote:
>
>> Encode.pm started updating the string to decode in-place when a second
>> argument is passed in version 2.40. This causes 'decode_utf8("",
>> Encode::FB_CROAK)' to die with a message like:
>
> Very minor complaint: line break here makes it less readable.
>
> Perhaps this?
>
> Encode.pm started updating the string to decode in-place when a second argument
> is passed in version 2.40. This causes 'decode_utf8("", Encode::FB_CROAK)' to
> die with a message like:
The wrapping was automatically done by vim. I'll try tweaking width/contents to make it flow better.
>> Modification of a read-only value attempted at
>> /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level/Encode.pm line
>> 216.
>
> Very minor complaint: It might be better to not include path to installed
> Encode.pm, which is different on different filesystems.
>
> Modification of a read-only value attempted at .../Encode.pm line
> 216.
>> Changes since v1:
>> - Use an explicitly empty variable instead of $_
>
> ...which was undefined, not empty, I think.
It still served to test the two argument case, but I thought an explicit variable that exactly matched the previous call would be better.
>> - based against maint
>
> Was there any difference versus being based against 'master'?
Whitespace in context lines. The skip_all and test_done lines were re-indented at some point. Minor, but I thought I'd mention it.
~~ Brian
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] t/gitweb-lib: Don't pass constant to decode_utf8
2010-10-20 22:13 ` Brian Gernhardt
@ 2010-10-20 22:28 ` Jakub Narebski
0 siblings, 0 replies; 5+ messages in thread
From: Jakub Narebski @ 2010-10-20 22:28 UTC (permalink / raw)
To: Brian Gernhardt; +Cc: Git List, Sven Verdoolaege, Junio C Hamano
On Thu, 21 Oct 2010, Brian Gernhardt wrote:
> On Oct 20, 2010, at 3:05 PM, Jakub Narebski wrote:
>> On Wed, 20 Oct 2010, Brian Gernhardt wrote:
>>
>>> Encode.pm started updating the string to decode in-place when a second
>>> argument is passed in version 2.40. This causes 'decode_utf8("",
>>> Encode::FB_CROAK)' to die with a message like:
>>
>> Very minor complaint: line break here makes it less readable.
>>
>> Perhaps this?
>>
>> Encode.pm started updating the string to decode in-place when a second argument
>> is passed in version 2.40. This causes 'decode_utf8("", Encode::FB_CROAK)' to
>> die with a message like:
>
> The wrapping was automatically done by vim. I'll try tweaking
> width/contents to make it flow better.
Note that it is just nitpicking: the commit message is quite fine as
it is.
>>> Changes since v1:
>>> - Use an explicitly empty variable instead of $_
>>
>> ...which was undefined, not empty, I think.
>
> It still served to test the two argument case, but I thought an explicit
> variable that exactly matched the previous call would be better.
It is better, IMHO.
>>> - based against maint
>>
>> Was there any difference versus being based against 'master'?
>
> Whitespace in context lines. The skip_all and test_done lines were
> re-indented at some point. Minor, but I thought I'd mention it.
O.K.
Thanks again.
--
Jakub Narebski
Poland
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v3 (maint)] t/gitweb-lib: Don't pass constant to decode_utf8
2010-10-20 19:05 ` Jakub Narebski
2010-10-20 22:13 ` Brian Gernhardt
@ 2010-10-20 23:07 ` Brian Gernhardt
1 sibling, 0 replies; 5+ messages in thread
From: Brian Gernhardt @ 2010-10-20 23:07 UTC (permalink / raw)
To: Git List; +Cc: Jakub Narebski, Sven Verdoolaege
Encode.pm started updating the string to decode in-place when
a second argument is passed in version 2.40. This causes
'decode_utf8("", Encode::FB_CROAK)' to die with a message like:
Modification of a read-only value attempted at .../Encode.pm line 216.
Work around this by passing an empty variable instead of a constant
string.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
---
Changes since v2:
- Re-wrapped first paragraph for easier reading
- Removed long OS X-specific Perl library path
- Added Ack
t/gitweb-lib.sh | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh
index 81ef2a0..1b9523d 100644
--- a/t/gitweb-lib.sh
+++ b/t/gitweb-lib.sh
@@ -80,7 +80,7 @@ if ! test_have_prereq PERL; then
test_done
fi
-perl -MEncode -e 'decode_utf8("", Encode::FB_CROAK)' >/dev/null 2>&1 || {
+perl -MEncode -e '$e="";decode_utf8($e, Encode::FB_CROAK)' >/dev/null 2>&1 || {
skip_all='skipping gitweb tests, perl version is too old'
test_done
}
--
1.7.3.1.209.g52408
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-10-20 23:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-20 5:57 [PATCH v2] t/gitweb-lib: Don't pass constant to decode_utf8 Brian Gernhardt
2010-10-20 19:05 ` Jakub Narebski
2010-10-20 22:13 ` Brian Gernhardt
2010-10-20 22:28 ` Jakub Narebski
2010-10-20 23:07 ` [PATCH v3 (maint)] " Brian Gernhardt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).