From: Jeff King <peff@peff.net>
To: git@vger.kernel.org
Subject: [PATCH v4 12/23] pack-objects: use bitmaps when packing objects
Date: Sat, 21 Dec 2013 09:00:09 -0500 [thread overview]
Message-ID: <20131221140009.GL21145@sigill.intra.peff.net> (raw)
In-Reply-To: <20131221135651.GA20818@sigill.intra.peff.net>
From: Vicent Marti <tanoku@gmail.com>
In this patch, we use the bitmap API to perform the `Counting Objects`
phase in pack-objects, rather than a traditional walk through the object
graph. For a reasonably-packed large repo, the time to fetch and clone
is often dominated by the full-object revision walk during the Counting
Objects phase. Using bitmaps can reduce the CPU time required on the
server (and therefore start sending the actual pack data with less
delay).
For bitmaps to be used, the following must be true:
1. We must be packing to stdout (as a normal `pack-objects` from
`upload-pack` would do).
2. There must be a .bitmap index containing at least one of the
"have" objects that the client is asking for.
3. Bitmaps must be enabled (they are enabled by default, but can be
disabled by setting `pack.usebitmaps` to false, or by using
`--no-use-bitmap-index` on the command-line).
If any of these is not true, we fall back to doing a normal walk of the
object graph.
Here are some sample timings from a full pack of `torvalds/linux` (i.e.
something very similar to what would be generated for a clone of the
repository) that show the speedup produced by various
methods:
[existing graph traversal]
$ time git pack-objects --all --stdout --no-use-bitmap-index \
</dev/null >/dev/null
Counting objects: 3237103, done.
Compressing objects: 100% (508752/508752), done.
Total 3237103 (delta 2699584), reused 3237103 (delta 2699584)
real 0m44.111s
user 0m42.396s
sys 0m3.544s
[bitmaps only, without partial pack reuse; note that
pack reuse is automatic, so timing this required a
patch to disable it]
$ time git pack-objects --all --stdout </dev/null >/dev/null
Counting objects: 3237103, done.
Compressing objects: 100% (508752/508752), done.
Total 3237103 (delta 2699584), reused 3237103 (delta 2699584)
real 0m5.413s
user 0m5.604s
sys 0m1.804s
[bitmaps with pack reuse (what you get with this patch)]
$ time git pack-objects --all --stdout </dev/null >/dev/null
Reusing existing pack: 3237103, done.
Total 3237103 (delta 0), reused 0 (delta 0)
real 0m1.636s
user 0m1.460s
sys 0m0.172s
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
---
Documentation/config.txt | 6 +++
builtin/pack-objects.c | 107 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 113 insertions(+)
diff --git a/Documentation/config.txt b/Documentation/config.txt
index ab26963..a981369 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -1858,6 +1858,12 @@ pack.packSizeLimit::
Common unit suffixes of 'k', 'm', or 'g' are
supported.
+pack.useBitmaps::
+ When true, git will use pack bitmaps (if available) when packing
+ to stdout (e.g., during the server side of a fetch). Defaults to
+ true. You should not generally need to turn this off unless
+ you are debugging pack bitmaps.
+
pager.<cmd>::
If the value is boolean, turns on or off pagination of the
output of a particular Git subcommand when writing to a tty.
diff --git a/builtin/pack-objects.c b/builtin/pack-objects.c
index 13b171d..030d894 100644
--- a/builtin/pack-objects.c
+++ b/builtin/pack-objects.c
@@ -19,6 +19,7 @@
#include "refs.h"
#include "streaming.h"
#include "thread-utils.h"
+#include "pack-bitmap.h"
static const char *pack_usage[] = {
N_("git pack-objects --stdout [options...] [< ref-list | < object-list]"),
@@ -57,6 +58,12 @@ static struct progress *progress_state;
static int pack_compression_level = Z_DEFAULT_COMPRESSION;
static int pack_compression_seen;
+static struct packed_git *reuse_packfile;
+static uint32_t reuse_packfile_objects;
+static off_t reuse_packfile_offset;
+
+static int use_bitmap_index = 1;
+
static unsigned long delta_cache_size = 0;
static unsigned long max_delta_cache_size = 256 * 1024 * 1024;
static unsigned long cache_max_small_delta_size = 1000;
@@ -678,6 +685,46 @@ static struct object_entry **compute_write_order(void)
return wo;
}
+static off_t write_reused_pack(struct sha1file *f)
+{
+ unsigned char buffer[8192];
+ off_t to_write;
+ int fd;
+
+ if (!is_pack_valid(reuse_packfile))
+ die("packfile is invalid: %s", reuse_packfile->pack_name);
+
+ fd = git_open_noatime(reuse_packfile->pack_name);
+ if (fd < 0)
+ die_errno("unable to open packfile for reuse: %s",
+ reuse_packfile->pack_name);
+
+ if (lseek(fd, sizeof(struct pack_header), SEEK_SET) == -1)
+ die_errno("unable to seek in reused packfile");
+
+ if (reuse_packfile_offset < 0)
+ reuse_packfile_offset = reuse_packfile->pack_size - 20;
+
+ to_write = reuse_packfile_offset - sizeof(struct pack_header);
+
+ while (to_write) {
+ int read_pack = xread(fd, buffer, sizeof(buffer));
+
+ if (read_pack <= 0)
+ die_errno("unable to read from reused packfile");
+
+ if (read_pack > to_write)
+ read_pack = to_write;
+
+ sha1write(f, buffer, read_pack);
+ to_write -= read_pack;
+ }
+
+ close(fd);
+ written += reuse_packfile_objects;
+ return reuse_packfile_offset - sizeof(struct pack_header);
+}
+
static void write_pack_file(void)
{
uint32_t i = 0, j;
@@ -704,6 +751,15 @@ static void write_pack_file(void)
offset = write_pack_header(f, nr_remaining);
if (!offset)
die_errno("unable to write pack header");
+
+ if (reuse_packfile) {
+ off_t packfile_size;
+ assert(pack_to_stdout);
+
+ packfile_size = write_reused_pack(f);
+ offset += packfile_size;
+ }
+
nr_written = 0;
for (; i < to_pack.nr_objects; i++) {
struct object_entry *e = write_order[i];
@@ -923,6 +979,22 @@ static int add_object_entry(const unsigned char *sha1, enum object_type type,
return 1;
}
+static int add_object_entry_from_bitmap(const unsigned char *sha1,
+ enum object_type type,
+ int flags, uint32_t name_hash,
+ struct packed_git *pack, off_t offset)
+{
+ uint32_t index_pos;
+
+ if (have_duplicate_entry(sha1, 0, &index_pos))
+ return 0;
+
+ create_object_entry(sha1, type, name_hash, 0, 0, index_pos, pack, offset);
+
+ display_progress(progress_state, to_pack.nr_objects);
+ return 1;
+}
+
struct pbase_tree_cache {
unsigned char sha1[20];
int ref;
@@ -2085,6 +2157,10 @@ static int git_pack_config(const char *k, const char *v, void *cb)
cache_max_small_delta_size = git_config_int(k, v);
return 0;
}
+ if (!strcmp(k, "pack.usebitmaps")) {
+ use_bitmap_index = git_config_bool(k, v);
+ return 0;
+ }
if (!strcmp(k, "pack.threads")) {
delta_search_threads = git_config_int(k, v);
if (delta_search_threads < 0)
@@ -2293,6 +2369,29 @@ static void loosen_unused_packed_objects(struct rev_info *revs)
}
}
+static int get_object_list_from_bitmap(struct rev_info *revs)
+{
+ if (prepare_bitmap_walk(revs) < 0)
+ return -1;
+
+ if (!reuse_partial_packfile_from_bitmap(
+ &reuse_packfile,
+ &reuse_packfile_objects,
+ &reuse_packfile_offset)) {
+ assert(reuse_packfile_objects);
+ nr_result += reuse_packfile_objects;
+
+ if (progress) {
+ fprintf(stderr, "Reusing existing pack: %d, done.\n",
+ reuse_packfile_objects);
+ fflush(stderr);
+ }
+ }
+
+ traverse_bitmap_commit_list(&add_object_entry_from_bitmap);
+ return 0;
+}
+
static void get_object_list(int ac, const char **av)
{
struct rev_info revs;
@@ -2320,6 +2419,9 @@ static void get_object_list(int ac, const char **av)
die("bad revision '%s'", line);
}
+ if (use_bitmap_index && !get_object_list_from_bitmap(&revs))
+ return;
+
if (prepare_revision_walk(&revs))
die("revision walk setup failed");
mark_edges_uninteresting(&revs, show_edge);
@@ -2449,6 +2551,8 @@ int cmd_pack_objects(int argc, const char **argv, const char *prefix)
N_("pack compression level")),
OPT_SET_INT(0, "keep-true-parents", &grafts_replace_parents,
N_("do not hide commits by grafts"), 0),
+ OPT_BOOL(0, "use-bitmap-index", &use_bitmap_index,
+ N_("use a bitmap index if available to speed up counting objects")),
OPT_END(),
};
@@ -2515,6 +2619,9 @@ int cmd_pack_objects(int argc, const char **argv, const char *prefix)
if (keep_unreachable && unpack_unreachable)
die("--keep-unreachable and --unpack-unreachable are incompatible.");
+ if (!use_internal_rev_list || !pack_to_stdout || is_repository_shallow())
+ use_bitmap_index = 0;
+
if (progress && all_progress_implied)
progress = 2;
--
1.8.5.1.399.g900e7cd
next prev parent reply other threads:[~2013-12-21 14:00 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-21 13:56 [PATCH v4 0/22] pack bitmaps Jeff King
2013-12-21 13:59 ` [PATCH v4 01/23] sha1write: make buffer const-correct Jeff King
2013-12-22 9:06 ` Christian Couder
2013-12-21 13:59 ` [PATCH v4 02/23] revindex: Export new APIs Jeff King
2013-12-21 13:59 ` [PATCH v4 03/23] pack-objects: Refactor the packing list Jeff King
2013-12-21 13:59 ` [PATCH v4 04/23] pack-objects: factor out name_hash Jeff King
2013-12-21 13:59 ` [PATCH v4 05/23] revision: allow setting custom limiter function Jeff King
2013-12-21 13:59 ` [PATCH v4 06/23] sha1_file: export `git_open_noatime` Jeff King
2013-12-21 13:59 ` [PATCH v4 07/23] compat: add endianness helpers Jeff King
2013-12-21 13:59 ` [PATCH v4 08/23] ewah: compressed bitmap implementation Jeff King
2014-01-23 2:05 ` Jonathan Nieder
2014-01-23 18:33 ` Jeff King
2014-01-23 18:35 ` [PATCH 1/2] compat: move unaligned helpers to bswap.h Jeff King
2014-01-23 19:41 ` Jonathan Nieder
2014-01-23 19:44 ` Jeff King
2014-01-23 19:56 ` Jonathan Nieder
2014-01-23 20:04 ` Jeff King
2014-01-23 20:08 ` Jonathan Nieder
2014-01-23 20:09 ` Jeff King
2014-01-23 18:35 ` [PATCH 2/2] ewah: support platforms that require aligned reads Jeff King
2014-01-23 19:52 ` [PATCH v4 08/23] ewah: compressed bitmap implementation Jonathan Nieder
2014-01-23 20:03 ` Jeff King
2014-01-23 20:12 ` Jonathan Nieder
2014-01-23 20:13 ` Jeff King
2014-01-23 20:23 ` Jonathan Nieder
2014-01-23 20:29 ` Jeff King
2014-01-23 20:38 ` Jeff King
2014-01-23 20:14 ` Shawn Pearce
2014-01-23 20:26 ` Jeff King
2014-01-23 21:53 ` brian m. carlson
2014-01-23 22:07 ` Jeff King
2014-01-23 22:17 ` Jonathan Nieder
2014-01-23 22:26 ` Jeff King
2014-01-23 22:33 ` Jonathan Nieder
2014-01-23 20:18 ` Jonathan Nieder
2014-01-23 21:20 ` [PATCH v2 0/3] unaligned reads from .bitmap files Jeff King
2014-01-23 21:23 ` [PATCH 1/3] block-sha1: factor out get_be and put_be wrappers Jeff King
2014-01-23 23:19 ` Jonathan Nieder
2014-01-23 21:26 ` [PATCH 2/3] read-cache: use get_be32 instead of hand-rolled ntoh_l Jeff King
2014-01-23 23:34 ` Jonathan Nieder
2014-01-24 2:22 ` Jeff King
2014-01-23 21:27 ` [PATCH 3/3] ewah: support platforms that require aligned reads Jeff King
2014-01-23 23:44 ` Jonathan Nieder
2014-01-23 23:49 ` Vicent Martí
2014-01-24 0:15 ` Jonathan Nieder
2014-01-23 23:17 ` [PATCH v2 0/3] unaligned reads from .bitmap files Jonathan Nieder
2013-12-21 13:59 ` [PATCH v4 09/23] documentation: add documentation for the bitmap format Jeff King
2013-12-21 14:00 ` [PATCH v4 10/23] pack-bitmap: add support for bitmap indexes Jeff King
2013-12-21 14:00 ` [PATCH v4 11/23] pack-objects: split add_object_entry Jeff King
2013-12-21 14:00 ` Jeff King [this message]
2013-12-21 14:00 ` [PATCH v4 13/23] rev-list: add bitmap mode to speed up object lists Jeff King
2013-12-21 14:00 ` [PATCH v4 14/23] pack-objects: implement bitmap writing Jeff King
2013-12-21 14:00 ` [PATCH v4 15/23] repack: stop using magic number for ARRAY_SIZE(exts) Jeff King
2013-12-21 14:00 ` [PATCH v4 16/23] repack: turn exts array into array-of-struct Jeff King
2013-12-21 14:00 ` [PATCH v4 17/23] repack: handle optional files created by pack-objects Jeff King
2013-12-21 14:00 ` [PATCH v4 18/23] repack: consider bitmaps when performing repacks Jeff King
2013-12-21 14:00 ` [PATCH v4 19/23] count-objects: recognize .bitmap in garbage-checking Jeff King
2013-12-21 14:00 ` [PATCH v4 20/23] t: add basic bitmap functionality tests Jeff King
2013-12-21 14:00 ` [PATCH v4 21/23] t/perf: add tests for pack bitmaps Jeff King
2013-12-21 14:00 ` [PATCH v4 22/23] pack-bitmap: implement optional name_hash cache Jeff King
2013-12-21 14:00 ` [PATCH v4 23/23] compat/mingw.h: Fix the MinGW and msvc builds Jeff King
2013-12-25 22:08 ` Erik Faye-Lund
2013-12-28 10:00 ` Jeff King
2013-12-28 10:06 ` Vicent Martí
2013-12-28 15:58 ` Ramsay Jones
2013-12-21 14:03 ` [PATCH v4 0/22] pack bitmaps Jeff King
2013-12-21 14:05 ` Jeff King
2013-12-21 18:34 ` Thomas Rast
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131221140009.GL21145@sigill.intra.peff.net \
--to=peff@peff.net \
--cc=git@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).