From: Adrian Ratiu <adrian.ratiu@collabora.com>
To: git@vger.kernel.org
Cc: Jeff King <peff@peff.net>,
Emily Shaffer <emilyshaffer@google.com>,
Junio C Hamano <gitster@pobox.com>,
Patrick Steinhardt <ps@pks.im>,
Josh Steadmon <steadmon@google.com>,
Kristoffer Haugsbakk <kristofferhaugsbakk@fastmail.com>,
"brian m . carlson" <sandals@crustytoothpaste.net>,
Adrian Ratiu <adrian.ratiu@collabora.com>
Subject: [PATCH v6 11/12] hook: add hook.<event>.enabled switch
Date: Sat, 4 Apr 2026 11:29:33 +0300 [thread overview]
Message-ID: <20260404082934.173788-12-adrian.ratiu@collabora.com> (raw)
In-Reply-To: <20260404082934.173788-1-adrian.ratiu@collabora.com>
Add a hook.<event>.enabled config key that disables all hooks for
a given event, when set to false, acting as a high-level switch
above the existing per-hook hook.<friendly-name>.enabled.
Event-disabled hooks are shown in "git hook list" with an
"event-disabled" tab-separated prefix before the name:
$ git hook list test-hook
event-disabled hook-1
event-disabled hook-2
With --show-scope:
$ git hook list --show-scope test-hook
local event-disabled hook-1
When a hook is both per-hook disabled and event-disabled, only
"event-disabled" is shown: the event-level switch is the more
relevant piece of information, and the per-hook "disabled" status
will surface once the event is re-enabled.
Using an event name as a friendly-name (e.g. hook.<event>.enabled)
can cause ambiguity, so a fatal error is issued when using a known
event name and a warning is issued for unknown event name, since
a collision cannot be detected with certainty for unknown events.
Suggested-by: Patrick Steinhardt <ps@pks.im>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
---
Documentation/config/hook.adoc | 20 ++++++++
builtin/hook.c | 20 +++++---
hook.c | 47 +++++++++++++++++--
hook.h | 1 +
repository.c | 1 +
repository.h | 4 ++
t/t1800-hook.sh | 83 ++++++++++++++++++++++++++++++++++
7 files changed, 165 insertions(+), 11 deletions(-)
diff --git a/Documentation/config/hook.adoc b/Documentation/config/hook.adoc
index d4fa29d936..e0db3afa19 100644
--- a/Documentation/config/hook.adoc
+++ b/Documentation/config/hook.adoc
@@ -15,6 +15,12 @@ hook.<friendly-name>.event::
events, specify the key more than once. An empty value resets
the list of events, clearing any previously defined events for
`hook.<friendly-name>`. See linkgit:git-hook[1].
++
+The `<friendly-name>` must not be the same as a known hook event name
+(e.g. do not use `hook.pre-commit.event`). Using a known event name as
+a friendly-name is a fatal error because it creates an ambiguity with
+`hook.<event>.enabled` and `hook.<event>.jobs`. For unknown event names,
+a warning is issued when `<friendly-name>` matches the event value.
hook.<friendly-name>.enabled::
Whether the hook `hook.<friendly-name>` is enabled. Defaults to `true`.
@@ -33,6 +39,20 @@ hook.<friendly-name>.parallel::
found in the hooks directory do not need to, and run in parallel when
the effective job count is greater than 1. See linkgit:git-hook[1].
+hook.<event>.enabled::
+ Switch to enable or disable all hooks for the `<event>` hook event.
+ When set to `false`, no hooks fire for that event, regardless of any
+ per-hook `hook.<friendly-name>.enabled` settings. Defaults to `true`.
+ See linkgit:git-hook[1].
++
+Note on naming: `<event>` must be the event name (e.g. `pre-commit`),
+not a hook friendly-name. Since using a known event name as a
+friendly-name is disallowed (see `hook.<friendly-name>.event` above),
+there is no ambiguity between event-level and per-hook `.enabled`
+settings for known events. For unknown events, if a friendly-name
+matches the event name despite the warning, `.enabled` is treated
+as per-hook only.
+
hook.<event>.jobs::
Specifies how many hooks can be run simultaneously for the `<event>`
hook event (e.g. `hook.post-receive.jobs = 4`). Overrides `hook.jobs`
diff --git a/builtin/hook.c b/builtin/hook.c
index 1839412dca..8e47e22e2a 100644
--- a/builtin/hook.c
+++ b/builtin/hook.c
@@ -87,14 +87,22 @@ static int list(int argc, const char **argv, const char *prefix,
const char *name = h->u.configured.friendly_name;
const char *scope = show_scope ?
config_scope_name(h->u.configured.scope) : NULL;
+ /*
+ * Show the most relevant disable reason. Event-level
+ * takes precedence: if the whole event is off, that
+ * is what the user needs to know. The per-hook
+ * "disabled" surfaces once the event is re-enabled.
+ */
+ const char *disability =
+ h->u.configured.event_disabled ? "event-disabled\t" :
+ h->u.configured.disabled ? "disabled\t" :
+ "";
if (scope)
- printf("%s\t%s%s%c", scope,
- h->u.configured.disabled ? "disabled\t" : "",
- name, line_terminator);
+ printf("%s\t%s%s%c", scope, disability, name,
+ line_terminator);
else
- printf("%s%s%c",
- h->u.configured.disabled ? "disabled\t" : "",
- name, line_terminator);
+ printf("%s%s%c", disability, name,
+ line_terminator);
break;
}
default:
diff --git a/hook.c b/hook.c
index 19076f8f2b..bc990d4ed4 100644
--- a/hook.c
+++ b/hook.c
@@ -133,7 +133,9 @@ struct hook_config_cache_entry {
* Callback struct to collect all hook.* keys in a single config pass.
* commands: friendly-name to command map.
* event_hooks: event-name to list of friendly-names map.
- * disabled_hooks: set of friendly-names with hook.<friendly-name>.enabled = false.
+ * disabled_hooks: set of all names with hook.<name>.enabled = false; after
+ * parsing, names that are not friendly-names become event-level
+ * disables stored in r->disabled_events. This collects all.
* parallel_hooks: friendly-name to parallel flag.
* event_jobs: event-name to per-event jobs count (stored as uintptr_t, NULL == unset).
* jobs: value of the global hook.jobs key. Defaults to 0 if unset (stored in r->hook_jobs).
@@ -189,8 +191,21 @@ static int hook_config_lookup_all(const char *key, const char *value,
strmap_for_each_entry(&data->event_hooks, &iter, e)
unsorted_string_list_remove(e->value, hook_name, 0);
} else {
- struct string_list *hooks =
- strmap_get(&data->event_hooks, value);
+ struct string_list *hooks;
+
+ if (is_known_hook(hook_name))
+ die(_("hook friendly-name '%s' collides with "
+ "a known event name; please choose a "
+ "different friendly-name"),
+ hook_name);
+
+ if (!strcmp(hook_name, value))
+ warning(_("hook friendly-name '%s' is the "
+ "same as its event; this may cause "
+ "ambiguity with hook.%s.enabled"),
+ hook_name, hook_name);
+
+ hooks = strmap_get(&data->event_hooks, value);
if (!hooks) {
CALLOC_ARRAY(hooks, 1);
@@ -345,6 +360,22 @@ static void build_hook_config_map(struct repository *r, struct strmap *cache)
warn_jobs_on_friendly_names(&cb_data);
+ /*
+ * Populate disabled_events: names in disabled_hooks that are not
+ * friendly-names are event-level switches (hook.<event>.enabled = false).
+ * Names that are friendly-names are already handled per-hook via the
+ * hook_config_cache_entry.disabled flag below.
+ */
+ if (r) {
+ string_list_clear(&r->disabled_events, 0);
+ string_list_init_dup(&r->disabled_events);
+ for (size_t i = 0; i < cb_data.disabled_hooks.nr; i++) {
+ const char *n = cb_data.disabled_hooks.items[i].string;
+ if (!is_friendly_name(&cb_data, n))
+ string_list_append(&r->disabled_events, n);
+ }
+ }
+
/* Construct the cache from parsed configs. */
strmap_for_each_entry(&cb_data.event_hooks, &iter, e) {
struct string_list *hook_names = e->value;
@@ -446,6 +477,8 @@ static void list_hooks_add_configured(struct repository *r,
{
struct strmap *cache = get_hook_config_cache(r);
struct string_list *configured_hooks = strmap_get(cache, hookname);
+ bool event_is_disabled = r ? !!unsorted_string_list_lookup(&r->disabled_events,
+ hookname) : 0;
/* Iterate through configured hooks and initialize internal states */
for (size_t i = 0; configured_hooks && i < configured_hooks->nr; i++) {
@@ -472,6 +505,7 @@ static void list_hooks_add_configured(struct repository *r,
entry->command ? xstrdup(entry->command) : NULL;
hook->u.configured.scope = entry->scope;
hook->u.configured.disabled = entry->disabled;
+ hook->u.configured.event_disabled = event_is_disabled;
hook->parallel = entry->parallel;
string_list_append(list, friendly_name)->util = hook;
@@ -484,6 +518,8 @@ static void list_hooks_add_configured(struct repository *r,
if (!r || !r->gitdir) {
hook_cache_clear(cache);
free(cache);
+ if (r)
+ string_list_clear(&r->disabled_events, 0);
}
}
@@ -515,7 +551,7 @@ int hook_exists(struct repository *r, const char *name)
for (size_t i = 0; i < hooks->nr; i++) {
struct hook *h = hooks->items[i].util;
if (h->kind == HOOK_TRADITIONAL ||
- !h->u.configured.disabled) {
+ (!h->u.configured.disabled && !h->u.configured.event_disabled)) {
exists = 1;
break;
}
@@ -538,7 +574,8 @@ static int pick_next_hook(struct child_process *cp,
if (hook_cb->hook_to_run_index >= hook_list->nr)
return 0;
h = hook_list->items[hook_cb->hook_to_run_index++].util;
- } while (h->kind == HOOK_CONFIGURED && h->u.configured.disabled);
+ } while (h->kind == HOOK_CONFIGURED &&
+ (h->u.configured.disabled || h->u.configured.event_disabled));
cp->no_stdin = 1;
strvec_pushv(&cp->env, hook_cb->options->env.v);
diff --git a/hook.h b/hook.h
index 5a93f56618..b4372b636f 100644
--- a/hook.h
+++ b/hook.h
@@ -32,6 +32,7 @@ struct hook {
const char *command;
enum config_scope scope;
bool disabled;
+ bool event_disabled;
} configured;
} u;
diff --git a/repository.c b/repository.c
index 4030db4460..db57b8308b 100644
--- a/repository.c
+++ b/repository.c
@@ -427,6 +427,7 @@ void repo_clear(struct repository *repo)
FREE_AND_NULL(repo->hook_config_cache);
}
strmap_clear(&repo->event_jobs, 0); /* values are uintptr_t, not heap ptrs */
+ string_list_clear(&repo->disabled_events, 0);
if (repo->promisor_remote_config) {
promisor_remote_clear(repo->promisor_remote_config);
diff --git a/repository.h b/repository.h
index 6b67ec02e2..4969d8b8eb 100644
--- a/repository.h
+++ b/repository.h
@@ -2,6 +2,7 @@
#define REPOSITORY_H
#include "strmap.h"
+#include "string-list.h"
#include "repo-settings.h"
#include "environment.h"
@@ -178,6 +179,9 @@ struct repository {
/* Cached map of event-name -> jobs count (as uintptr_t) from hook.<event>.jobs. */
struct strmap event_jobs;
+ /* Cached list of event names with hook.<event>.enabled = false. */
+ struct string_list disabled_events;
+
/* Configurations related to promisor remotes. */
char *repository_format_partial_clone;
struct promisor_remote_config *promisor_remote_config;
diff --git a/t/t1800-hook.sh b/t/t1800-hook.sh
index 85b055a897..273588e4d4 100755
--- a/t/t1800-hook.sh
+++ b/t/t1800-hook.sh
@@ -1058,4 +1058,87 @@ test_expect_success 'hook.<event>.jobs does not warn for a real event name' '
test_grep ! "friendly-name" err
'
+test_expect_success 'hook.<event>.enabled=false skips all hooks for event' '
+ test_config hook.hook-1.event test-hook &&
+ test_config hook.hook-1.command "echo ran" &&
+ test_config hook.test-hook.enabled false &&
+ git hook run --allow-unknown-hook-name test-hook >out 2>err &&
+ test_must_be_empty out
+'
+
+test_expect_success 'hook.<event>.enabled=true does not suppress hooks' '
+ test_config hook.hook-1.event test-hook &&
+ test_config hook.hook-1.command "echo ran" &&
+ test_config hook.test-hook.enabled true &&
+ git hook run --allow-unknown-hook-name test-hook >out 2>err &&
+ test_grep "ran" err
+'
+
+test_expect_success 'hook.<event>.enabled=false does not affect other events' '
+ test_config hook.hook-1.event test-hook &&
+ test_config hook.hook-1.command "echo ran" &&
+ test_config hook.other-event.enabled false &&
+ git hook run --allow-unknown-hook-name test-hook >out 2>err &&
+ test_grep "ran" err
+'
+
+test_expect_success 'hook.<friendly-name>.enabled=false still disables that hook' '
+ test_config hook.hook-1.event test-hook &&
+ test_config hook.hook-1.command "echo hook-1" &&
+ test_config hook.hook-2.event test-hook &&
+ test_config hook.hook-2.command "echo hook-2" &&
+ test_config hook.hook-1.enabled false &&
+ git hook run --allow-unknown-hook-name test-hook >out 2>err &&
+ test_grep ! "hook-1" err &&
+ test_grep "hook-2" err
+'
+
+test_expect_success 'git hook list shows event-disabled hooks as event-disabled' '
+ test_config hook.hook-1.event test-hook &&
+ test_config hook.hook-1.command "echo ran" &&
+ test_config hook.hook-2.event test-hook &&
+ test_config hook.hook-2.command "echo ran" &&
+ test_config hook.test-hook.enabled false &&
+ git hook list --allow-unknown-hook-name test-hook >actual &&
+ test_grep "^event-disabled hook-1$" actual &&
+ test_grep "^event-disabled hook-2$" actual
+'
+
+test_expect_success 'git hook list shows scope with event-disabled' '
+ test_config hook.hook-1.event test-hook &&
+ test_config hook.hook-1.command "echo ran" &&
+ test_config hook.test-hook.enabled false &&
+ git hook list --allow-unknown-hook-name --show-scope test-hook >actual &&
+ test_grep "^local event-disabled hook-1$" actual
+'
+
+test_expect_success 'git hook list still shows hooks when event is disabled' '
+ test_config hook.hook-1.event test-hook &&
+ test_config hook.hook-1.command "echo ran" &&
+ test_config hook.test-hook.enabled false &&
+ git hook list --allow-unknown-hook-name test-hook >actual &&
+ test_grep "event-disabled" actual
+'
+
+test_expect_success 'friendly-name matching known event name is rejected' '
+ test_config hook.pre-commit.event pre-commit &&
+ test_config hook.pre-commit.command "echo oops" &&
+ test_must_fail git hook run pre-commit 2>err &&
+ test_grep "collides with a known event name" err
+'
+
+test_expect_success 'friendly-name matching known event name is rejected even for different event' '
+ test_config hook.pre-commit.event post-commit &&
+ test_config hook.pre-commit.command "echo oops" &&
+ test_must_fail git hook run post-commit 2>err &&
+ test_grep "collides with a known event name" err
+'
+
+test_expect_success 'friendly-name matching unknown event warns' '
+ test_config hook.test-hook.event test-hook &&
+ test_config hook.test-hook.command "echo ran" &&
+ git hook run --allow-unknown-hook-name test-hook >out 2>err &&
+ test_grep "same as its event" err
+'
+
test_done
--
2.52.0.732.gb351b5166d.dirty
next prev parent reply other threads:[~2026-04-04 8:30 UTC|newest]
Thread overview: 113+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-04 17:33 [PATCH 0/4] Run hooks in parallel Adrian Ratiu
2026-02-04 17:33 ` [PATCH 1/4] config: add a repo_config_get_uint() helper Adrian Ratiu
2026-02-04 17:33 ` [PATCH 2/4] hook: allow parallel hook execution Adrian Ratiu
2026-02-11 12:41 ` Patrick Steinhardt
2026-02-12 12:25 ` Adrian Ratiu
2026-02-04 17:33 ` [PATCH 3/4] hook: introduce extensions.hookStdoutToStderr Adrian Ratiu
2026-02-04 17:33 ` [PATCH 4/4] hook: allow runtime enabling extensions.hookStdoutToStderr Adrian Ratiu
2026-02-12 10:43 ` [PATCH 0/4] Run hooks in parallel Phillip Wood
2026-02-12 14:24 ` Adrian Ratiu
2026-02-13 14:39 ` Phillip Wood
2026-02-13 17:21 ` Adrian Ratiu
2026-02-22 0:28 ` [PATCH v2 00/10] " Adrian Ratiu
2026-02-22 0:28 ` [PATCH v2 01/10] repository: fix repo_init() memleak due to missing _clear() Adrian Ratiu
2026-02-22 0:28 ` [PATCH v2 02/10] config: add a repo_config_get_uint() helper Adrian Ratiu
2026-02-22 0:28 ` [PATCH v2 03/10] hook: refactor hook_config_cache from strmap to named struct Adrian Ratiu
2026-02-22 0:28 ` [PATCH v2 04/10] hook: parse the hook.jobs config Adrian Ratiu
2026-02-22 0:28 ` [PATCH v2 05/10] hook: allow parallel hook execution Adrian Ratiu
2026-02-22 0:29 ` [PATCH v2 06/10] hook: mark non-parallelizable hooks Adrian Ratiu
2026-02-22 0:29 ` [PATCH v2 07/10] hook: add -j/--jobs option to git hook run Adrian Ratiu
2026-02-22 0:29 ` [PATCH v2 08/10] hook: add per-event jobs config Adrian Ratiu
2026-02-22 0:29 ` [PATCH v2 09/10] hook: introduce extensions.hookStdoutToStderr Adrian Ratiu
2026-02-22 0:29 ` [PATCH v2 10/10] hook: allow runtime enabling extensions.hookStdoutToStderr Adrian Ratiu
2026-03-09 13:37 ` [PATCH v3 0/9] Run hooks in parallel Adrian Ratiu
2026-03-09 13:37 ` [PATCH v3 1/9] repository: fix repo_init() memleak due to missing _clear() Adrian Ratiu
2026-03-15 4:55 ` Junio C Hamano
2026-03-15 5:05 ` Junio C Hamano
2026-03-09 13:37 ` [PATCH v3 2/9] config: add a repo_config_get_uint() helper Adrian Ratiu
2026-03-09 13:37 ` [PATCH v3 3/9] hook: parse the hook.jobs config Adrian Ratiu
2026-03-15 16:13 ` Junio C Hamano
2026-03-09 13:37 ` [PATCH v3 4/9] hook: allow parallel hook execution Adrian Ratiu
2026-03-15 20:46 ` Junio C Hamano
2026-03-18 18:02 ` Adrian Ratiu
2026-03-09 13:37 ` [PATCH v3 5/9] hook: mark non-parallelizable hooks Adrian Ratiu
2026-03-15 20:56 ` Junio C Hamano
2026-03-18 18:40 ` Adrian Ratiu
2026-03-09 13:37 ` [PATCH v3 6/9] hook: add -j/--jobs option to git hook run Adrian Ratiu
2026-03-15 21:00 ` Junio C Hamano
2026-03-18 19:00 ` Adrian Ratiu
2026-03-09 13:37 ` [PATCH v3 7/9] hook: add per-event jobs config Adrian Ratiu
2026-03-16 18:40 ` Junio C Hamano
2026-03-18 19:21 ` Adrian Ratiu
2026-03-09 13:37 ` [PATCH v3 8/9] hook: introduce extensions.hookStdoutToStderr Adrian Ratiu
2026-03-16 18:44 ` Junio C Hamano
2026-03-18 19:50 ` Adrian Ratiu
2026-03-09 13:37 ` [PATCH v3 9/9] hook: allow runtime enabling extensions.hookStdoutToStderr Adrian Ratiu
2026-03-20 13:53 ` [PATCH v4 0/9] Run hooks in parallel Adrian Ratiu
2026-03-20 13:53 ` [PATCH v4 1/9] config: add a repo_config_get_uint() helper Adrian Ratiu
2026-03-20 13:53 ` [PATCH v4 2/9] hook: parse the hook.jobs config Adrian Ratiu
2026-03-24 9:07 ` Patrick Steinhardt
2026-03-24 18:59 ` Adrian Ratiu
2026-03-20 13:53 ` [PATCH v4 3/9] hook: allow parallel hook execution Adrian Ratiu
2026-03-24 9:07 ` Patrick Steinhardt
2026-03-20 13:53 ` [PATCH v4 4/9] hook: allow pre-push parallel execution Adrian Ratiu
2026-03-20 13:53 ` [PATCH v4 5/9] hook: mark non-parallelizable hooks Adrian Ratiu
2026-03-20 13:53 ` [PATCH v4 6/9] hook: add -j/--jobs option to git hook run Adrian Ratiu
2026-03-24 9:07 ` Patrick Steinhardt
2026-03-20 13:53 ` [PATCH v4 7/9] hook: add per-event jobs config Adrian Ratiu
2026-03-24 9:08 ` Patrick Steinhardt
2026-03-20 13:53 ` [PATCH v4 8/9] hook: warn when hook.<friendly-name>.jobs is set Adrian Ratiu
2026-03-24 9:08 ` Patrick Steinhardt
2026-03-20 13:53 ` [PATCH v4 9/9] hook: add hook.<event>.enabled switch Adrian Ratiu
2026-03-24 9:08 ` Patrick Steinhardt
2026-03-25 18:43 ` Adrian Ratiu
2026-03-20 17:24 ` [PATCH v4 0/9] Run hooks in parallel Junio C Hamano
2026-03-23 15:07 ` Adrian Ratiu
2026-03-24 9:07 ` Patrick Steinhardt
2026-03-26 10:18 ` [PATCH v5 00/12] " Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 01/12] repository: fix repo_init() memleak due to missing _clear() Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 02/12] config: add a repo_config_get_uint() helper Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 03/12] hook: parse the hook.jobs config Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 04/12] hook: allow parallel hook execution Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 05/12] hook: allow pre-push parallel execution Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 06/12] hook: mark non-parallelizable hooks Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 07/12] hook: add -j/--jobs option to git hook run Adrian Ratiu
2026-03-27 14:46 ` Patrick Steinhardt
2026-03-26 10:18 ` [PATCH v5 08/12] hook: add per-event jobs config Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 09/12] hook: warn when hook.<friendly-name>.jobs is set Adrian Ratiu
2026-03-27 14:46 ` Patrick Steinhardt
2026-03-26 10:18 ` [PATCH v5 10/12] hook: move is_known_hook() to hook.c for wider use Adrian Ratiu
2026-03-27 14:46 ` Patrick Steinhardt
2026-03-27 15:59 ` Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 11/12] hook: add hook.<event>.enabled switch Adrian Ratiu
2026-03-26 10:18 ` [PATCH v5 12/12] hook: allow hook.jobs=-1 to use all available CPU cores Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 00/12] Run hooks in parallel Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 01/12] repository: fix repo_init() memleak due to missing _clear() Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 02/12] config: add a repo_config_get_uint() helper Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 03/12] hook: parse the hook.jobs config Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 04/12] hook: allow parallel hook execution Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 05/12] hook: allow pre-push parallel execution Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 06/12] hook: mark non-parallelizable hooks Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 07/12] hook: add -j/--jobs option to git hook run Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 08/12] hook: add per-event jobs config Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 09/12] hook: warn when hook.<friendly-name>.jobs is set Adrian Ratiu
2026-04-04 8:29 ` [PATCH v6 10/12] hook: move is_known_hook() to hook.c for wider use Adrian Ratiu
2026-04-04 8:29 ` Adrian Ratiu [this message]
2026-04-04 8:29 ` [PATCH v6 12/12] hook: allow hook.jobs=-1 to use all available CPU cores Adrian Ratiu
2026-04-06 16:24 ` [PATCH v6 00/12] Run hooks in parallel Junio C Hamano
2026-04-08 10:17 ` Patrick Steinhardt
2026-04-08 16:57 ` Junio C Hamano
2026-04-10 9:05 ` [PATCH v7 00/13] " Adrian Ratiu
2026-04-10 9:05 ` [PATCH v7 01/13] repository: fix repo_init() memleak due to missing _clear() Adrian Ratiu
2026-04-10 9:05 ` [PATCH v7 02/13] config: add a repo_config_get_uint() helper Adrian Ratiu
2026-04-10 9:05 ` [PATCH v7 03/13] hook: parse the hook.jobs config Adrian Ratiu
2026-04-10 9:05 ` [PATCH v7 04/13] hook: allow parallel hook execution Adrian Ratiu
2026-04-10 9:06 ` [PATCH v7 05/13] hook: allow pre-push parallel execution Adrian Ratiu
2026-04-10 9:06 ` [PATCH v7 06/13] hook: mark non-parallelizable hooks Adrian Ratiu
2026-04-10 9:06 ` [PATCH v7 07/13] hook: add -j/--jobs option to git hook run Adrian Ratiu
2026-04-10 9:06 ` [PATCH v7 08/13] hook: add per-event jobs config Adrian Ratiu
2026-04-10 9:06 ` [PATCH v7 09/13] hook: warn when hook.<friendly-name>.jobs is set Adrian Ratiu
2026-04-10 9:06 ` [PATCH v7 10/13] hook: move is_known_hook() to hook.c for wider use Adrian Ratiu
2026-04-10 9:06 ` [PATCH v7 11/13] hook: add hook.<event>.enabled switch Adrian Ratiu
2026-04-10 9:06 ` [PATCH v7 12/13] hook: allow hook.jobs=-1 to use all available CPU cores Adrian Ratiu
2026-04-10 9:06 ` [PATCH v7 13/13] t1800: test SIGPIPE with parallel hooks Adrian Ratiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260404082934.173788-12-adrian.ratiu@collabora.com \
--to=adrian.ratiu@collabora.com \
--cc=emilyshaffer@google.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=kristofferhaugsbakk@fastmail.com \
--cc=peff@peff.net \
--cc=ps@pks.im \
--cc=sandals@crustytoothpaste.net \
--cc=steadmon@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox