Re: Fwd: [OT] Re: Git via a proxy server?

[Petr Vandrovec <petr@vmware.com>]

Sam Song wrote:
> Hello,
> 
> Petr Vandrovec <petr@vmware.com> wrote:
> 
>>Date:	Mon, 27 Feb 2006 00:35:00 +0100
>>From:	Petr Vandrovec <petr@vmware.com>
>>To:	Sergey Vlasov <vsu@altlinux.ru>
>>CC:	"Salyzyn, Mark" <mark_salyzyn@adaptec.com>,
>>	Kernel Mailing List 
>><linux-kernel@vger.kernel.org>
>>
>>>[snip]
>>>I have successfully used transconnect
>>>(http://sourceforge.net/projects/transconnect) for
>>>tunnelling git
>>>protocol through a HTTP proxy (squid in my case)
>>>supporting the CONNECT method.
>>>
>>>[snip] 
>>>Note: most HTTP proxy servers allow CONNECT method
>>>to a very limited range of ports, and 
>>>administrators will need to enable the git port
>>>(9418) explicitly.
>>>
>>
>>I know I'm coming kinda late, but I'm using:
>>
>>export GIT_PROXY_COMMAND=/usr/local/bin/proxy-cmd.sh
>>
>>and proxy-cmd.sh is just single-line command glued
>>from what I found available in /bin:
>>
>>#! /bin/bash
>>
>>(echo "CONNECT $1:$2 HTTP/1.0"; echo; cat ) | socket
>>
>>proxy.ourcompany.com 3128 | (read a; read a; cat )
>>
>>Replace socket's arguments 'proxy.ourcompany.com
>>3128' with your http proxy.  Fortunately our proxy
>>does not see anything wrong with git's port.
>>		Best regards,
>>			Petr Vandrovec
> 
> 
> With above usage on GIT_PROXY_COMMAND, I still have
> problem on connection with remote git repository.
> 
> I also tried setting http_proxy directly but the same
> result. It's first usage of git in our network. Well, 
> need I enable the git port 9418 at proxy server? Or 
> did I miss sth or what?

Yes.  Try running 'socket 192.168.40.99 80', and type
CONNECT 204.152.191.37:9418 HTTP/1.0
Proxy-Authorization: Basic <yoursecret,f.e.wget -d should reveal this to you>
<empty line>

You should get back user readable diagnostics what went wrong.  Yes, your admin 
must allow CONNECT method for target port 9418.

> I use git-2006-05-14.tar.gz package on FC3. 
> 
> Method I : Use GIT_PROXY_COMMAND
> 
> [root@sam u-boot]# git clone \
> git://www.denx.de/git/u-boot.git u-boot-denx.git
> 
> fatal: exec failed
> fetch-pack from 'git://www.denx.de/git/u-boot.git' 
> failed.

Is $GIT_PROXY_COMMAND executable? (just in case...)  Try 'strace -f git clone 
...', it should tell you what's going on.

> #! /bin/bash
> 
> (echo "CONNECT $1:$2 HTTP/1.0";echo;cat) | socket
> <um> <pwd> 192.168.40.99 80 | (read a;read a;cat)

What is '<um>' and '<pwd>' ?  socket just connects somewhere, so if you are 
supposed to use <username>:<pwd> to connect to your proxy, you must add 
Proxy-Authorization header yourself:

(echo "CONNECT $1:$2 HTTP/1.0";
  echo "Proxy-Authorization: Basic <base64encoded um:pwd>";
  echo;
  cat ) | socket 192.168.40.99 80 | (read a; read a; cat)

Best to test this is to start 'socket 192.168.40.99 80' from command line and 
then type these two lines above, plus one empty line.  You should get back '200 
OK', empty line, and then you can start communicating using git protocol - if 
you can do that...

> Method II : Use http_proxy directly
> 
> [root@sam u-boot]# export \
> http_proxy="http://<username>:<pwd>@192.168.40.99:80"
> [root@sam u-boot]# git clone \ 
> http://parisc-linux.org/git/linux-2.6.git/ parisc-2.6

As far as I can tell, http_proxy is ignored (Debian's git 1.3.2-1/cogito 0.17.2-1).
								Petr