MinGW port updated to 1.5.2

MinGW port updated to 1.5.2

[Johannes Sixt]

This minute I've pushed the MinGW port, which is now at 1.5.2 to:

gitweb:     http://repo.or.cz/w/git/mingw.git
pull/clone: git://repo.or.cz/git/mingw.git

In addition to the 1.5.2 features, the progress indicator is shown in
more places (most notably when "Counting objects"), and
GIT_EXTERNAL_DIFF works now.

-- Hannes

Re: MinGW port updated to 1.5.2

[Han-Wen Nienhuys]

Johannes Sixt escreveu:
> This minute I've pushed the MinGW port, which is now at 1.5.2 to:
> 
> gitweb:     http://repo.or.cz/w/git/mingw.git
> pull/clone: git://repo.or.cz/git/mingw.git
> 
> In addition to the 1.5.2 features, the progress indicator is shown in
> more places (most notably when "Counting objects"), and
> GIT_EXTERNAL_DIFF works now.

http://lilypond.org/git/binaries/mingw/

uploading as I speak. Untested.


-- 
 Han-Wen Nienhuys - hanwen@xs4all.nl - http://www.xs4all.nl/~hanwen

Re: MinGW port updated to 1.5.2

[Aaron Gray]

> Johannes Sixt escreveu:
>> This minute I've pushed the MinGW port, which is now at 1.5.2 to:
>>
>> gitweb:     http://repo.or.cz/w/git/mingw.git
>> pull/clone: git://repo.or.cz/git/mingw.git
>>
>> In addition to the 1.5.2 features, the progress indicator is shown in
>> more places (most notably when "Counting objects"), and
>> GIT_EXTERNAL_DIFF works now.
>
> http://lilypond.org/git/binaries/mingw/
>
> uploading as I speak. Untested.

This installs to "C:\Program Files\Git" and is not availiable on the path. 
What is going on here please ?

Thanks,

Aaron

Re: MinGW port updated to 1.5.2

[Han-Wen Nienhuys]

Aaron Gray escreveu:
>>> GIT_EXTERNAL_DIFF works now.
>>
>> http://lilypond.org/git/binaries/mingw/
>>
>> uploading as I speak. Untested.
> 
> This installs to "C:\Program Files\Git" and is not availiable on the
> path. What is going on here please ?

this uses the same buildscripts as before, so if it worked, it should 
still work. The path should point to $PF/Git/usr/bin/ ; you might need to 
log out and log in again for the path to visible. 

-- 
 Han-Wen Nienhuys - hanwen@xs4all.nl - http://www.xs4all.nl/~hanwen

Re: MinGW port updated to 1.5.2

[Aaron Gray]

> Aaron Gray escreveu:
>>>> GIT_EXTERNAL_DIFF works now.
>>>
>>> http://lilypond.org/git/binaries/mingw/
>>>
>>> uploading as I speak. Untested.
>>
>> This installs to "C:\Program Files\Git" and is not availiable on the
>> path. What is going on here please ?
>
> this uses the same buildscripts as before, so if it worked, it should
> still work. The path should point to $PF/Git/usr/bin/ ; you might need to
> log out and log in again for the path to visible.

Still not working properly.

>From CMD.EXE, neither 'git clone' and 'git-clone' are accessable.

>From MSYS '/usr/share/git-core/templates/' is not accessable.

    $ git clone git://git.kernel.org/pub/scm/git/git.git
    Initialized empty Git repository in C:/MSYS/home/Aaron Gray/git/.git/
    warning: templates not found /usr/share/git-core/templates/

Another issue is git-clone is no atomic if it fails it leaves an open file 
that can only be deleted by logging off and on again.

Aaron

Re: MinGW port updated to 1.5.2

[Han-Wen Nienhuys]

Aaron Gray escreveu:
>> Aaron Gray escreveu:
>>>>> GIT_EXTERNAL_DIFF works now.
>>>>
>>>> http://lilypond.org/git/binaries/mingw/
>>>>
>>>> uploading as I speak. Untested.
>>>
>>> This installs to "C:\Program Files\Git" and is not availiable on the
>>> path. What is going on here please ?
>>
>> this uses the same buildscripts as before, so if it worked, it should
>> still work. The path should point to $PF/Git/usr/bin/ ; you might need to
>> log out and log in again for the path to visible.
> 
> Still not working properly.
> 
> From CMD.EXE, neither 'git clone' and 'git-clone' are accessable.

- does the registry key HKLM SYSTEM\CurrentControlSet\Control\Session Manager\Environment
contain a PATH variable containing /Program Files/Git/usr/bin as an entry?

- what is the value of the PATH variable in CMD ?

- if this doens't work, please uninstall (run uninstall.exe) and rerun
the installer from the command line with the /S switch; this should generate
an install.log in $PF/Git/ . Send this to the list, or, if it's very big, send
send by private mail.


-- 
 Han-Wen Nienhuys - hanwen@xs4all.nl - http://www.xs4all.nl/~hanwen

Re: MinGW port updated to 1.5.2

[Han-Wen Nienhuys]

Aaron Gray escreveu:
>> Aaron Gray escreveu:
>>>> Aaron Gray escreveu:
>>>>>>> GIT_EXTERNAL_DIFF works now.
>>>>>>
>>>>>> http://lilypond.org/git/binaries/mingw/
>>>>>>
>>>>>> uploading as I speak. Untested.
>>>>>
>>>>> This installs to "C:\Program Files\Git" and is not availiable on the
>>>>> path. What is going on here please ?
>>>>
>>>> this uses the same buildscripts as before, so if it worked, it should
>>>> still work. The path should point to $PF/Git/usr/bin/ ; you might
>>>> need to
>>>> log out and log in again for the path to visible.
>>>
>>> Still not working properly.
>>>
>>> From CMD.EXE, neither 'git clone' and 'git-clone' are accessable.

>> - what is the value of the PATH variable in CMD ?
> 
> Path=C:\Program
> Files\GreenBorder\;C:\windows\system32;C:\windows;C:\windows\Sys
> tem32\Wbem;C:\Program Files\ATI Technologies\ATI Control
> Panel;c:\Program Files\
> Microsoft SQL Server\90\Tools\binn\;C:\GnuWin32\bin;C:\Program
> Files\QuickTime\Q
> TSystem\;C:\Utils;C:\Program
> Files\MakeMsi\;c:\MinGW\bin;C:\MinGW\usr\bin;C:\Pro
> gram Files\Git\usr\bin;C:\Program Files\Git\usr\bin

Can you troubleshoot this for me?  As you can see, you have

C:\Program Files\Git\usr\bin

in the path. That AFAIK should be enough to have git.exe run 
inside CMD.  Maybe I'm missing something, but that is as far as my 
windows knowledge goes.

-- 
 Han-Wen Nienhuys - hanwen@xs4all.nl - http://www.xs4all.nl/~hanwen

Re: MinGW port updated to 1.5.2

[Aaron Gray]

> Aaron Gray escreveu:
>>> Aaron Gray escreveu:
>>>>> Aaron Gray escreveu:
>>>>>>>> GIT_EXTERNAL_DIFF works now.
>>>>>>>
>>>>>>> http://lilypond.org/git/binaries/mingw/
>>>>>>>
>>>>>>> uploading as I speak. Untested.
>>>>>>
>>>>>> This installs to "C:\Program Files\Git" and is not availiable on the
>>>>>> path. What is going on here please ?
>>>>>
>>>>> this uses the same buildscripts as before, so if it worked, it should
>>>>> still work. The path should point to $PF/Git/usr/bin/ ; you might
>>>>> need to
>>>>> log out and log in again for the path to visible.
>>>>
>>>> Still not working properly.
>>>>
>>>> From CMD.EXE, neither 'git clone' and 'git-clone' are accessable.
>
>>> - what is the value of the PATH variable in CMD ?
>>
>> Path=C:\Program
>> Files\GreenBorder\;C:\windows\system32;C:\windows;C:\windows\Sys
>> tem32\Wbem;C:\Program Files\ATI Technologies\ATI Control
>> Panel;c:\Program Files\
>> Microsoft SQL Server\90\Tools\binn\;C:\GnuWin32\bin;C:\Program
>> Files\QuickTime\Q
>> TSystem\;C:\Utils;C:\Program
>> Files\MakeMsi\;c:\MinGW\bin;C:\MinGW\usr\bin;C:\Pro
>> gram Files\Git\usr\bin;C:\Program Files\Git\usr\bin
>
> Can you troubleshoot this for me?  As you can see, you have
>
> C:\Program Files\Git\usr\bin
>
> in the path. That AFAIK should be enough to have git.exe run
> inside CMD.  Maybe I'm missing something, but that is as far as my
> windows knowledge goes.

Git runs, 'git init' runs, but 'git clone' or 'git-clone' do not.

'git init' reports it cannot find '/usr/share/git-core/templates/'

I have no idea whats wrong and do not have the time to try to debug it at 
present.

Aaron