[PATCH 0/5] completion: remove hardcoded config variable names

[PATCH 0/5] completion: remove hardcoded config variable names

[Philippe Blain via GitGitGadget]

This series removes hardcoded config variable names in the
__git_complete_config_variable_name function, partly by adding a new mode to
'git help'. It also adds completion for 'submodule.*' config variables,
which were previously missing.

I think it makes sense to do that in the same series since it's closely
related, and splitting it would result in textual conflicts between both
series if one does not build on top of the other, but I'm open to other
suggestions.

Thanks,

Philippe.

Philippe Blain (5):
  completion: add space after config variable names also in Bash 3
  completion: complete 'submodule.*' config variables
  completion: add and use
    __git_compute_first_level_config_vars_for_section
  builtin/help: add --config-all-for-completion
  completion: add an use
    __git_compute_second_level_config_vars_for_section

 builtin/help.c                         |  7 ++
 contrib/completion/git-completion.bash | 90 +++++++++++++-------------
 t/t9902-completion.sh                  | 21 ++++++
 3 files changed, 74 insertions(+), 44 deletions(-)


base-commit: b50a608ba20348cb3dfc16a696816d51780e3f0f
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-git-1660%2Fphil-blain%2Fcompletion-submodule-config-v1
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-git-1660/phil-blain/completion-submodule-config-v1
Pull-Request: https://github.com/git/git/pull/1660
-- 
gitgitgadget

[PATCH 1/5] completion: add space after config variable names also in Bash 3

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

In be6444d1ca (completion: bash: add correct suffix in variables,
2021-08-16), __git_complete_config_variable_name was changed to use
"${sfx- }" instead of "$sfx" as the fourth argument of _gitcomp_nl and
_gitcomp_nl_append, such that this argument evaluates to a space if sfx
is unset. This was to ensure that e.g.

	git config branch.autoSetupMe[TAB]

correctly completes to 'branch.autoSetupMerge ' with the trailing space.
This commits notes that the fix only works in Bash 4 because in Bash 3
the 'local sfx' construct at the beginning of
__git_complete_config_variable_name creates an empty string.

Make the fix also work for Bash 3 by using the "unset or null' parameter
expansion syntax ("${sfx:- }"), such that the parameter is also expanded
to a space if it is set but null, as is the behaviour of 'local sfx' in
Bash 3.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 6662db221df..159a4fd8add 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2750,7 +2750,7 @@ __git_complete_config_variable_name ()
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
 		__gitcomp_direct "$(__git_heads "$pfx" "$cur_" ".")"
-		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx- }"
+		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	guitool.*.*)
@@ -2784,7 +2784,7 @@ __git_complete_config_variable_name ()
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
 		__git_compute_all_commands
-		__gitcomp_nl "$__git_all_commands" "$pfx" "$cur_" "${sfx- }"
+		__gitcomp_nl "$__git_all_commands" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	remote.*.*)
@@ -2800,7 +2800,7 @@ __git_complete_config_variable_name ()
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
 		__gitcomp_nl "$(__git_remotes)" "$pfx" "$cur_" "."
-		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx- }"
+		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	url.*.*)
-- 
gitgitgadget

[PATCH 2/5] completion: complete 'submodule.*' config variables

[Philippe Blain via GitGitGadget]

From: Philippe Blain <philippe.blain@canada.ca>

In the Bash completion script, function
__git_complete_config_variable_name completes config variables and has
special logic to deal with config variables involving user-defined
names, like branch.<name>.* and remote.<name>.*.

This special logic is missing for submodule-related config variables.
Add the appropriate branches to the case statement, making use of the
in-tree '.gitmodules' to list relevant submodules.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 159a4fd8add..8af9bc3f4e1 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2803,6 +2803,19 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
+	submodule.*.*)
+		local pfx="${cur_%.*}."
+		cur_="${cur_##*.}"
+		__gitcomp "url update branch fetchRecurseSubmodules ignore active" "$pfx" "$cur_" "$sfx"
+		return
+		;;
+	submodule.*)
+		local pfx="${cur_%.*}."
+		cur_="${cur_#*.}"
+		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
+		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
+		return
+		;;
 	url.*.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_##*.}"
-- 
gitgitgadget

[PATCH 3/5] completion: add and use __git_compute_first_level_config_vars_for_section

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

The function __git_complete_config_variable_name in the Bash completion
script hardcodes several config variable names. These variables are
those in config section where user-defined names can appear, such as
"branch.<name>". These sections are treated first by the case statement,
and the two last "catch all" cases are used for other sections, making
use of the __git_compute_config_vars and __git_compute_config_sections
function, which omit listing any variables containing wildcards or
placeholders. Having hardcoded config variables introduces the risk of
the completion code becoming out of sync with the actual config
variables accepted by Git.

To avoid these hardcoded config variables, introduce a new function,
__git_compute_first_level_config_vars_for_section, making use of the
existing __git_config_vars variable. This function takes as argument a
config section name and computes the matching "first level" config
variables for that section, i.e. those _not_ containing any placeholder,
like 'branch.autoSetupMerge, 'remote.pushDefault', etc.  Use this
function and the variables it defines in the 'branch.*', 'remote.*' and
'submodule.*' switches of the case statement instead of hardcoding the
corresponding config variables.  Note that we use indirect expansion
instead of associative arrays because those are not supported in Bash 3,
on which macOS is stuck for licensing reasons.

Add a test to make sure the new function works correctly by verfying it
lists all 'submodule' config variables. This has the downside that this
test must be updated when new 'submodule' configuration are added, but
this should be a small burden since it happens infrequently.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 24 +++++++++++++++++++++---
 t/t9902-completion.sh                  | 11 +++++++++++
 2 files changed, 32 insertions(+), 3 deletions(-)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 8af9bc3f4e1..2934ceb7637 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2596,6 +2596,15 @@ __git_compute_config_vars ()
 	__git_config_vars="$(git help --config-for-completion)"
 }
 
+__git_compute_first_level_config_vars_for_section ()
+{
+	section="$1"
+	__git_compute_config_vars
+	local this_section="__git_first_level_config_vars_for_section_${section}"
+	test -n "${!this_section}" ||
+	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
+}
+
 __git_config_sections=
 __git_compute_config_sections ()
 {
@@ -2749,8 +2758,11 @@ __git_complete_config_variable_name ()
 	branch.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
+		local section="${pfx%.}"
 		__gitcomp_direct "$(__git_heads "$pfx" "$cur_" ".")"
-		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx:- }"
+		__git_compute_first_level_config_vars_for_section "${section}"
+		local this_section="__git_first_level_config_vars_for_section_${section}"
+		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	guitool.*.*)
@@ -2799,8 +2811,11 @@ __git_complete_config_variable_name ()
 	remote.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
+		local section="${pfx%.}"
 		__gitcomp_nl "$(__git_remotes)" "$pfx" "$cur_" "."
-		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
+		__git_compute_first_level_config_vars_for_section "${section}"
+		local this_section="__git_first_level_config_vars_for_section_${section}"
+		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	submodule.*.*)
@@ -2812,8 +2827,11 @@ __git_complete_config_variable_name ()
 	submodule.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
+		local section="${pfx%.}"
 		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
-		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
+		__git_compute_first_level_config_vars_for_section "${section}"
+		local this_section="__git_first_level_config_vars_for_section_${section}"
+		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	url.*.*)
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 35eb534fdda..f28d8f531b7 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -2583,6 +2583,17 @@ test_expect_success 'git config - variable name include' '
 	EOF
 '
 
+test_expect_success 'git config - variable name - __git_compute_first_level_config_vars_for_section' '
+	test_completion "git config submodule." <<-\EOF
+	submodule.active Z
+	submodule.alternateErrorStrategy Z
+	submodule.alternateLocation Z
+	submodule.fetchJobs Z
+	submodule.propagateBranches Z
+	submodule.recurse Z
+	EOF
+'
+
 test_expect_success 'git config - value' '
 	test_completion "git config color.pager " <<-\EOF
 	false Z
-- 
gitgitgadget

[PATCH 4/5] builtin/help: add --config-all-for-completion

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

There is currently no machine-friendly way to show _all_ configuration
variables from the command line. 'git help --config' does show them all,
but it also sets up the pager. 'git help --config-for-completion' omits
some variables (those containing wildcards, for example) and 'git help
--config-section-for-completion' shows only top-level section names.

In a following commit we will want to have access to a list of all
configuration variables from the Bash completion script. As such, add a
new mode for the command, HELP_ACTION_CONFIG_ALL_FOR_COMPLETION,
triggered by the new option '--config-all-for-completion'. In this mode,
show all variables, just as HELP_ACTION_CONFIG, but do not set up the
pager.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 builtin/help.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/builtin/help.c b/builtin/help.c
index dc1fbe2b986..dacaeb10bf4 100644
--- a/builtin/help.c
+++ b/builtin/help.c
@@ -50,6 +50,7 @@ static enum help_action {
 	HELP_ACTION_DEVELOPER_INTERFACES,
 	HELP_ACTION_CONFIG_FOR_COMPLETION,
 	HELP_ACTION_CONFIG_SECTIONS_FOR_COMPLETION,
+	HELP_ACTION_CONFIG_ALL_FOR_COMPLETION,
 } cmd_mode;
 
 static const char *html_path;
@@ -86,6 +87,8 @@ static struct option builtin_help_options[] = {
 		    HELP_ACTION_CONFIG_FOR_COMPLETION, PARSE_OPT_HIDDEN),
 	OPT_CMDMODE_F(0, "config-sections-for-completion", &cmd_mode, "",
 		    HELP_ACTION_CONFIG_SECTIONS_FOR_COMPLETION, PARSE_OPT_HIDDEN),
+	OPT_CMDMODE_F(0, "config-all-for-completion", &cmd_mode, "",
+		    HELP_ACTION_CONFIG_ALL_FOR_COMPLETION, PARSE_OPT_HIDDEN),
 
 	OPT_END(),
 };
@@ -670,6 +673,10 @@ int cmd_help(int argc, const char **argv, const char *prefix)
 		opt_mode_usage(argc, "--config-for-completion", help_format);
 		list_config_help(SHOW_CONFIG_VARS);
 		return 0;
+	case HELP_ACTION_CONFIG_ALL_FOR_COMPLETION:
+		opt_mode_usage(argc, "--config-all-for-completion", help_format);
+		list_config_help(SHOW_CONFIG_HUMAN);
+		return 0;
 	case HELP_ACTION_USER_INTERFACES:
 		opt_mode_usage(argc, "--user-interfaces", help_format);
 		list_user_interfaces_help();
-- 
gitgitgadget

[PATCH 5/5] completion: add an use __git_compute_second_level_config_vars_for_section

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

In a previous commit we removed some hardcoded config variable names from
function __git_complete_config_variable_name in the completion script by
introducing a new function,
__git_compute_first_level_config_vars_for_section.

The remaining hardcoded config variables are "second level"
configuration variables, meaning 'branch.<name>.upstream',
'remote.<name>.url', etc. where <name> is a user-defined name.

Making use of the new --config-all-for-completion flag to 'git help'
introduced in the previous commit, add a new function,
__git_compute_second_level_config_vars_for_section. This function takes
as argument a config section name and computes the corresponding
second-level config variables, i.e. those that contain a '<' which
indicates the start of a placeholder. Note that as in
__git_compute_first_level_config_vars_for_section added previsouly, we
use indirect expansion instead of associative arrays to stay compatible
with Bash 3 on which macOS is stuck for licensing reasons.

Use this new function and the variables it defines in
__git_complete_config_variable_name to remove hardcoded config
variables, and add a test to verify the new function.  Use a single
'case' for all sections with second-level variables names, since the
code for each of them is now exactly the same.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 71 ++++++++------------------
 t/t9902-completion.sh                  | 10 ++++
 2 files changed, 31 insertions(+), 50 deletions(-)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 2934ceb7637..0e8fd63bfdb 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2596,6 +2596,13 @@ __git_compute_config_vars ()
 	__git_config_vars="$(git help --config-for-completion)"
 }
 
+__git_config_vars_all=
+__git_compute_config_vars_all ()
+{
+	test -n "$__git_config_vars_all" ||
+	__git_config_vars_all="$(git help --config-all-for-completion)"
+}
+
 __git_compute_first_level_config_vars_for_section ()
 {
 	section="$1"
@@ -2605,6 +2612,15 @@ __git_compute_first_level_config_vars_for_section ()
 	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
 }
 
+__git_compute_second_level_config_vars_for_section ()
+{
+	section="$1"
+	__git_compute_config_vars_all
+	local this_section="__git_second_level_config_vars_for_section_${section}"
+	test -n "${!this_section}" ||
+	printf -v "__git_second_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars_all" | grep -E "^${section}\.<" | awk -F. '{print $3}')"
+}
+
 __git_config_sections=
 __git_compute_config_sections ()
 {
@@ -2749,10 +2765,13 @@ __git_complete_config_variable_name ()
 	done
 
 	case "$cur_" in
-	branch.*.*)
+	branch.*.*|guitool.*.*|difftool.*.*|man.*.*|mergetool.*.*|remote.*.*|submodule.*.*|url.*.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_##*.}"
-		__gitcomp "remote pushRemote merge mergeOptions rebase" "$pfx" "$cur_" "$sfx"
+		local section="${pfx%.*.}"
+		__git_compute_second_level_config_vars_for_section "${section}"
+		local this_section="__git_second_level_config_vars_for_section_${section}"
+		__gitcomp "${!this_section}" "$pfx" "$cur_" "$sfx"
 		return
 		;;
 	branch.*)
@@ -2765,33 +2784,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	guitool.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "
-			argPrompt cmd confirm needsFile noConsole noRescan
-			prompt revPrompt revUnmerged title
-			" "$pfx" "$cur_" "$sfx"
-		return
-		;;
-	difftool.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "cmd path" "$pfx" "$cur_" "$sfx"
-		return
-		;;
-	man.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "cmd path" "$pfx" "$cur_" "$sfx"
-		return
-		;;
-	mergetool.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "cmd path trustExitCode" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	pager.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
@@ -2799,15 +2791,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl "$__git_all_commands" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	remote.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "
-			url proxy fetch push mirror skipDefaultUpdate
-			receivepack uploadpack tagOpt pushurl
-			" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	remote.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
@@ -2818,12 +2801,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	submodule.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "url update branch fetchRecurseSubmodules ignore active" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	submodule.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
@@ -2834,12 +2811,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	url.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "insteadOf pushInsteadOf" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	*.*)
 		__git_compute_config_vars
 		__gitcomp "$__git_config_vars" "" "$cur_" "$sfx"
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index f28d8f531b7..24ff786b273 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -2593,6 +2593,16 @@ test_expect_success 'git config - variable name - __git_compute_first_level_conf
 	submodule.recurse Z
 	EOF
 '
+test_expect_success 'git config - variable name - __git_compute_second_level_config_vars_for_section' '
+	test_completion "git config branch.main." <<-\EOF
+	branch.main.description Z
+	branch.main.remote Z
+	branch.main.pushRemote Z
+	branch.main.merge Z
+	branch.main.mergeOptions Z
+	branch.main.rebase Z
+	EOF
+'
 
 test_expect_success 'git config - value' '
 	test_completion "git config color.pager " <<-\EOF
-- 
gitgitgadget

[PATCH v2 0/5] completion: remove hardcoded config variable names

[Philippe Blain via GitGitGadget]

Changes since v1:

 * Corrected my email in PATCH 2/5 (sorry for the noise)

v1: This series removes hardcoded config variable names in the
__git_complete_config_variable_name function, partly by adding a new mode to
'git help'. It also adds completion for 'submodule.*' config variables,
which were previously missing.

I think it makes sense to do that in the same series since it's closely
related, and splitting it would result in textual conflicts between both
series if one does not build on top of the other, but I'm open to other
suggestions.

Thanks,

Philippe.

Philippe Blain (5):
  completion: add space after config variable names also in Bash 3
  completion: complete 'submodule.*' config variables
  completion: add and use
    __git_compute_first_level_config_vars_for_section
  builtin/help: add --config-all-for-completion
  completion: add an use
    __git_compute_second_level_config_vars_for_section

 builtin/help.c                         |  7 ++
 contrib/completion/git-completion.bash | 90 +++++++++++++-------------
 t/t9902-completion.sh                  | 21 ++++++
 3 files changed, 74 insertions(+), 44 deletions(-)


base-commit: b50a608ba20348cb3dfc16a696816d51780e3f0f
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-git-1660%2Fphil-blain%2Fcompletion-submodule-config-v2
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-git-1660/phil-blain/completion-submodule-config-v2
Pull-Request: https://github.com/git/git/pull/1660

Range-diff vs v1:

 1:  837d92a6c27 = 1:  837d92a6c27 completion: add space after config variable names also in Bash 3
 2:  2dd3085f8d8 ! 2:  426374ff9b3 completion: complete 'submodule.*' config variables
     @@
       ## Metadata ##
     -Author: Philippe Blain <philippe.blain@canada.ca>
     +Author: Philippe Blain <levraiphilippeblain@gmail.com>
      
       ## Commit message ##
          completion: complete 'submodule.*' config variables
 3:  dd9395bda32 = 3:  838aabf2858 completion: add and use __git_compute_first_level_config_vars_for_section
 4:  3e83f21eb4e = 4:  d442a039b27 builtin/help: add --config-all-for-completion
 5:  b41844cd86e = 5:  a2e792c911e completion: add an use __git_compute_second_level_config_vars_for_section

-- 
gitgitgadget

[PATCH v2 1/5] completion: add space after config variable names also in Bash 3

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

In be6444d1ca (completion: bash: add correct suffix in variables,
2021-08-16), __git_complete_config_variable_name was changed to use
"${sfx- }" instead of "$sfx" as the fourth argument of _gitcomp_nl and
_gitcomp_nl_append, such that this argument evaluates to a space if sfx
is unset. This was to ensure that e.g.

	git config branch.autoSetupMe[TAB]

correctly completes to 'branch.autoSetupMerge ' with the trailing space.
This commits notes that the fix only works in Bash 4 because in Bash 3
the 'local sfx' construct at the beginning of
__git_complete_config_variable_name creates an empty string.

Make the fix also work for Bash 3 by using the "unset or null' parameter
expansion syntax ("${sfx:- }"), such that the parameter is also expanded
to a space if it is set but null, as is the behaviour of 'local sfx' in
Bash 3.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 6662db221df..159a4fd8add 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2750,7 +2750,7 @@ __git_complete_config_variable_name ()
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
 		__gitcomp_direct "$(__git_heads "$pfx" "$cur_" ".")"
-		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx- }"
+		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	guitool.*.*)
@@ -2784,7 +2784,7 @@ __git_complete_config_variable_name ()
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
 		__git_compute_all_commands
-		__gitcomp_nl "$__git_all_commands" "$pfx" "$cur_" "${sfx- }"
+		__gitcomp_nl "$__git_all_commands" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	remote.*.*)
@@ -2800,7 +2800,7 @@ __git_complete_config_variable_name ()
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
 		__gitcomp_nl "$(__git_remotes)" "$pfx" "$cur_" "."
-		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx- }"
+		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	url.*.*)
-- 
gitgitgadget

[PATCH v2 2/5] completion: complete 'submodule.*' config variables

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

In the Bash completion script, function
__git_complete_config_variable_name completes config variables and has
special logic to deal with config variables involving user-defined
names, like branch.<name>.* and remote.<name>.*.

This special logic is missing for submodule-related config variables.
Add the appropriate branches to the case statement, making use of the
in-tree '.gitmodules' to list relevant submodules.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 159a4fd8add..8af9bc3f4e1 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2803,6 +2803,19 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
+	submodule.*.*)
+		local pfx="${cur_%.*}."
+		cur_="${cur_##*.}"
+		__gitcomp "url update branch fetchRecurseSubmodules ignore active" "$pfx" "$cur_" "$sfx"
+		return
+		;;
+	submodule.*)
+		local pfx="${cur_%.*}."
+		cur_="${cur_#*.}"
+		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
+		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
+		return
+		;;
 	url.*.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_##*.}"
-- 
gitgitgadget

Re: [PATCH v2 2/5] completion: complete 'submodule.*' config variables

[Patrick Steinhardt]

[-- Attachment #1: Type: text/plain, Size: 2466 bytes --]

On Mon, Jan 29, 2024 at 01:27:58PM +0000, Philippe Blain via GitGitGadget wrote:
> From: Philippe Blain <levraiphilippeblain@gmail.com>
> 
> In the Bash completion script, function
> __git_complete_config_variable_name completes config variables and has
> special logic to deal with config variables involving user-defined
> names, like branch.<name>.* and remote.<name>.*.
> 
> This special logic is missing for submodule-related config variables.
> Add the appropriate branches to the case statement, making use of the
> in-tree '.gitmodules' to list relevant submodules.
> 
> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
> ---
>  contrib/completion/git-completion.bash | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
> index 159a4fd8add..8af9bc3f4e1 100644
> --- a/contrib/completion/git-completion.bash
> +++ b/contrib/completion/git-completion.bash
> @@ -2803,6 +2803,19 @@ __git_complete_config_variable_name ()
>  		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
>  		return
>  		;;
> +	submodule.*.*)
> +		local pfx="${cur_%.*}."
> +		cur_="${cur_##*.}"
> +		__gitcomp "url update branch fetchRecurseSubmodules ignore active" "$pfx" "$cur_" "$sfx"
> +		return
> +		;;
> +	submodule.*)
> +		local pfx="${cur_%.*}."
> +		cur_="${cur_#*.}"
> +		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
> +		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
> +		return
> +		;;

Hm, it feels quite awkward that we have to manually massage the
gitmodules config like this. But the closest tool I could find is
`git submodule status`, which would also end up describing commits in
each of the submodules and thus do needless work. And second, it prints
submodule paths and not submodule names, so it surfaces the wrong info
in the first place.

Ideally, we would create such a tool that makes the information more
accessible to us. But that certainly seems out of scope of this patch
series.

In any case though it would be nice to add some tests for these new
completions.

Patrick

>  	url.*.*)
>  		local pfx="${cur_%.*}."
>  		cur_="${cur_##*.}"
> -- 
> gitgitgadget
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 2/5] completion: complete 'submodule.*' config variables

[Philippe Blain]

Hi Patrick,

Le 2024-02-08 à 02:42, Patrick Steinhardt a écrit :
> On Mon, Jan 29, 2024 at 01:27:58PM +0000, Philippe Blain via GitGitGadget wrote:
>> From: Philippe Blain <levraiphilippeblain@gmail.com>
>>
>> In the Bash completion script, function
>> __git_complete_config_variable_name completes config variables and has
>> special logic to deal with config variables involving user-defined
>> names, like branch.<name>.* and remote.<name>.*.
>>
>> This special logic is missing for submodule-related config variables.
>> Add the appropriate branches to the case statement, making use of the
>> in-tree '.gitmodules' to list relevant submodules.
>>
>> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
>> ---
>>  contrib/completion/git-completion.bash | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>> diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
>> index 159a4fd8add..8af9bc3f4e1 100644
>> --- a/contrib/completion/git-completion.bash
>> +++ b/contrib/completion/git-completion.bash
>> @@ -2803,6 +2803,19 @@ __git_complete_config_variable_name ()
>>  		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
>>  		return
>>  		;;
>> +	submodule.*.*)
>> +		local pfx="${cur_%.*}."
>> +		cur_="${cur_##*.}"
>> +		__gitcomp "url update branch fetchRecurseSubmodules ignore active" "$pfx" "$cur_" "$sfx"
>> +		return
>> +		;;
>> +	submodule.*)
>> +		local pfx="${cur_%.*}."
>> +		cur_="${cur_#*.}"
>> +		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
>> +		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
>> +		return
>> +		;;
> 
> Hm, it feels quite awkward that we have to manually massage the
> gitmodules config like this. But the closest tool I could find is
> `git submodule status`, which would also end up describing commits in
> each of the submodules and thus do needless work. And second, it prints
> submodule paths and not submodule names, so it surfaces the wrong info
> in the first place.
> 
> Ideally, we would create such a tool that makes the information more
> accessible to us. But that certainly seems out of scope of this patch
> series.
> 
> In any case though it would be nice to add some tests for these new
> completions.

OK, I end up testing them in 3/5 via the __git_compute_first_level_config_vars_for_section
function I'm adding. But it's true I could add the test directly
in 2/5, if it makes more sense.

Thanks for your review !

Philippe.

[PATCH v2 3/5] completion: add and use __git_compute_first_level_config_vars_for_section

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

The function __git_complete_config_variable_name in the Bash completion
script hardcodes several config variable names. These variables are
those in config section where user-defined names can appear, such as
"branch.<name>". These sections are treated first by the case statement,
and the two last "catch all" cases are used for other sections, making
use of the __git_compute_config_vars and __git_compute_config_sections
function, which omit listing any variables containing wildcards or
placeholders. Having hardcoded config variables introduces the risk of
the completion code becoming out of sync with the actual config
variables accepted by Git.

To avoid these hardcoded config variables, introduce a new function,
__git_compute_first_level_config_vars_for_section, making use of the
existing __git_config_vars variable. This function takes as argument a
config section name and computes the matching "first level" config
variables for that section, i.e. those _not_ containing any placeholder,
like 'branch.autoSetupMerge, 'remote.pushDefault', etc.  Use this
function and the variables it defines in the 'branch.*', 'remote.*' and
'submodule.*' switches of the case statement instead of hardcoding the
corresponding config variables.  Note that we use indirect expansion
instead of associative arrays because those are not supported in Bash 3,
on which macOS is stuck for licensing reasons.

Add a test to make sure the new function works correctly by verfying it
lists all 'submodule' config variables. This has the downside that this
test must be updated when new 'submodule' configuration are added, but
this should be a small burden since it happens infrequently.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 24 +++++++++++++++++++++---
 t/t9902-completion.sh                  | 11 +++++++++++
 2 files changed, 32 insertions(+), 3 deletions(-)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 8af9bc3f4e1..2934ceb7637 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2596,6 +2596,15 @@ __git_compute_config_vars ()
 	__git_config_vars="$(git help --config-for-completion)"
 }
 
+__git_compute_first_level_config_vars_for_section ()
+{
+	section="$1"
+	__git_compute_config_vars
+	local this_section="__git_first_level_config_vars_for_section_${section}"
+	test -n "${!this_section}" ||
+	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
+}
+
 __git_config_sections=
 __git_compute_config_sections ()
 {
@@ -2749,8 +2758,11 @@ __git_complete_config_variable_name ()
 	branch.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
+		local section="${pfx%.}"
 		__gitcomp_direct "$(__git_heads "$pfx" "$cur_" ".")"
-		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx:- }"
+		__git_compute_first_level_config_vars_for_section "${section}"
+		local this_section="__git_first_level_config_vars_for_section_${section}"
+		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	guitool.*.*)
@@ -2799,8 +2811,11 @@ __git_complete_config_variable_name ()
 	remote.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
+		local section="${pfx%.}"
 		__gitcomp_nl "$(__git_remotes)" "$pfx" "$cur_" "."
-		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
+		__git_compute_first_level_config_vars_for_section "${section}"
+		local this_section="__git_first_level_config_vars_for_section_${section}"
+		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	submodule.*.*)
@@ -2812,8 +2827,11 @@ __git_complete_config_variable_name ()
 	submodule.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
+		local section="${pfx%.}"
 		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
-		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
+		__git_compute_first_level_config_vars_for_section "${section}"
+		local this_section="__git_first_level_config_vars_for_section_${section}"
+		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	url.*.*)
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 35eb534fdda..f28d8f531b7 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -2583,6 +2583,17 @@ test_expect_success 'git config - variable name include' '
 	EOF
 '
 
+test_expect_success 'git config - variable name - __git_compute_first_level_config_vars_for_section' '
+	test_completion "git config submodule." <<-\EOF
+	submodule.active Z
+	submodule.alternateErrorStrategy Z
+	submodule.alternateLocation Z
+	submodule.fetchJobs Z
+	submodule.propagateBranches Z
+	submodule.recurse Z
+	EOF
+'
+
 test_expect_success 'git config - value' '
 	test_completion "git config color.pager " <<-\EOF
 	false Z
-- 
gitgitgadget

Re: [PATCH v2 3/5] completion: add and use __git_compute_first_level_config_vars_for_section

[Patrick Steinhardt]

[-- Attachment #1: Type: text/plain, Size: 6400 bytes --]

On Mon, Jan 29, 2024 at 01:27:59PM +0000, Philippe Blain via GitGitGadget wrote:
> From: Philippe Blain <levraiphilippeblain@gmail.com>
> 
> The function __git_complete_config_variable_name in the Bash completion
> script hardcodes several config variable names. These variables are
> those in config section where user-defined names can appear, such as
> "branch.<name>". These sections are treated first by the case statement,
> and the two last "catch all" cases are used for other sections, making
> use of the __git_compute_config_vars and __git_compute_config_sections
> function, which omit listing any variables containing wildcards or
> placeholders. Having hardcoded config variables introduces the risk of
> the completion code becoming out of sync with the actual config
> variables accepted by Git.
> 
> To avoid these hardcoded config variables, introduce a new function,
> __git_compute_first_level_config_vars_for_section, making use of the
> existing __git_config_vars variable. This function takes as argument a
> config section name and computes the matching "first level" config
> variables for that section, i.e. those _not_ containing any placeholder,
> like 'branch.autoSetupMerge, 'remote.pushDefault', etc.  Use this
> function and the variables it defines in the 'branch.*', 'remote.*' and
> 'submodule.*' switches of the case statement instead of hardcoding the
> corresponding config variables.  Note that we use indirect expansion
> instead of associative arrays because those are not supported in Bash 3,
> on which macOS is stuck for licensing reasons.
> 
> Add a test to make sure the new function works correctly by verfying it
> lists all 'submodule' config variables. This has the downside that this
> test must be updated when new 'submodule' configuration are added, but
> this should be a small burden since it happens infrequently.
> 
> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
> ---
>  contrib/completion/git-completion.bash | 24 +++++++++++++++++++++---
>  t/t9902-completion.sh                  | 11 +++++++++++
>  2 files changed, 32 insertions(+), 3 deletions(-)
> 
> diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
> index 8af9bc3f4e1..2934ceb7637 100644
> --- a/contrib/completion/git-completion.bash
> +++ b/contrib/completion/git-completion.bash
> @@ -2596,6 +2596,15 @@ __git_compute_config_vars ()
>  	__git_config_vars="$(git help --config-for-completion)"
>  }
>  
> +__git_compute_first_level_config_vars_for_section ()
> +{
> +	section="$1"

Section needs to be `local`, right?

> +	__git_compute_config_vars
> +	local this_section="__git_first_level_config_vars_for_section_${section}"
> +	test -n "${!this_section}" ||
> +	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
> +}

I've been wondering a bit why we store the result in a global variable.
The value certainly isn't reused in the completion scripts here. It took
me quite some time to realize though that it's going to end up in the
user's shell environment even after completion finishes so that it can
be reused the next time we invoke the completion function.

While this does feel a tad weird to me to be stateful like this across
completion calls, we use the same pattern for `__git_config_vars` and
`__git_config_sections`. So I guess it should be fine given that there
is precedent.

>  __git_config_sections=
>  __git_compute_config_sections ()
>  {
> @@ -2749,8 +2758,11 @@ __git_complete_config_variable_name ()
>  	branch.*)
>  		local pfx="${cur_%.*}."
>  		cur_="${cur_#*.}"
> +		local section="${pfx%.}"
>  		__gitcomp_direct "$(__git_heads "$pfx" "$cur_" ".")"
> -		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx:- }"
> +		__git_compute_first_level_config_vars_for_section "${section}"
> +		local this_section="__git_first_level_config_vars_for_section_${section}"
> +		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
>  		return
>  		;;
>  	guitool.*.*)
> @@ -2799,8 +2811,11 @@ __git_complete_config_variable_name ()
>  	remote.*)
>  		local pfx="${cur_%.*}."
>  		cur_="${cur_#*.}"
> +		local section="${pfx%.}"
>  		__gitcomp_nl "$(__git_remotes)" "$pfx" "$cur_" "."
> -		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
> +		__git_compute_first_level_config_vars_for_section "${section}"
> +		local this_section="__git_first_level_config_vars_for_section_${section}"
> +		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
>  		return
>  		;;
>  	submodule.*.*)
> @@ -2812,8 +2827,11 @@ __git_complete_config_variable_name ()
>  	submodule.*)
>  		local pfx="${cur_%.*}."
>  		cur_="${cur_#*.}"
> +		local section="${pfx%.}"
>  		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
> -		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
> +		__git_compute_first_level_config_vars_for_section "${section}"
> +		local this_section="__git_first_level_config_vars_for_section_${section}"
> +		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
>  		return
>  		;;
>  	url.*.*)
> diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
> index 35eb534fdda..f28d8f531b7 100755
> --- a/t/t9902-completion.sh
> +++ b/t/t9902-completion.sh
> @@ -2583,6 +2583,17 @@ test_expect_success 'git config - variable name include' '
>  	EOF
>  '
>  
> +test_expect_success 'git config - variable name - __git_compute_first_level_config_vars_for_section' '
> +	test_completion "git config submodule." <<-\EOF
> +	submodule.active Z
> +	submodule.alternateErrorStrategy Z
> +	submodule.alternateLocation Z
> +	submodule.fetchJobs Z
> +	submodule.propagateBranches Z
> +	submodule.recurse Z
> +	EOF
> +'
> +

Shouldn't we verify that we know to complete both first-level config
vars as well as the user-specified submodule names here?

Patrick

>  test_expect_success 'git config - value' '
>  	test_completion "git config color.pager " <<-\EOF
>  	false Z
> -- 
> gitgitgadget
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 3/5] completion: add and use __git_compute_first_level_config_vars_for_section

[Philippe Blain]

Le 2024-02-08 à 02:42, Patrick Steinhardt a écrit :
> On Mon, Jan 29, 2024 at 01:27:59PM +0000, Philippe Blain via GitGitGadget wrote:
>> From: Philippe Blain <levraiphilippeblain@gmail.com>
>>
>> The function __git_complete_config_variable_name in the Bash completion
>> script hardcodes several config variable names. These variables are
>> those in config section where user-defined names can appear, such as
>> "branch.<name>". These sections are treated first by the case statement,
>> and the two last "catch all" cases are used for other sections, making
>> use of the __git_compute_config_vars and __git_compute_config_sections
>> function, which omit listing any variables containing wildcards or
>> placeholders. Having hardcoded config variables introduces the risk of
>> the completion code becoming out of sync with the actual config
>> variables accepted by Git.
>>
>> To avoid these hardcoded config variables, introduce a new function,
>> __git_compute_first_level_config_vars_for_section, making use of the
>> existing __git_config_vars variable. This function takes as argument a
>> config section name and computes the matching "first level" config
>> variables for that section, i.e. those _not_ containing any placeholder,
>> like 'branch.autoSetupMerge, 'remote.pushDefault', etc.  Use this
>> function and the variables it defines in the 'branch.*', 'remote.*' and
>> 'submodule.*' switches of the case statement instead of hardcoding the
>> corresponding config variables.  Note that we use indirect expansion
>> instead of associative arrays because those are not supported in Bash 3,
>> on which macOS is stuck for licensing reasons.
>>
>> Add a test to make sure the new function works correctly by verfying it
>> lists all 'submodule' config variables. This has the downside that this
>> test must be updated when new 'submodule' configuration are added, but
>> this should be a small burden since it happens infrequently.
>>
>> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
>> ---
>>  contrib/completion/git-completion.bash | 24 +++++++++++++++++++++---
>>  t/t9902-completion.sh                  | 11 +++++++++++
>>  2 files changed, 32 insertions(+), 3 deletions(-)
>>
>> diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
>> index 8af9bc3f4e1..2934ceb7637 100644
>> --- a/contrib/completion/git-completion.bash
>> +++ b/contrib/completion/git-completion.bash
>> @@ -2596,6 +2596,15 @@ __git_compute_config_vars ()
>>  	__git_config_vars="$(git help --config-for-completion)"
>>  }
>>  
>> +__git_compute_first_level_config_vars_for_section ()
>> +{
>> +	section="$1"
> 
> Section needs to be `local`, right?

Good eyes, I'll fix that in v3.

>> +	__git_compute_config_vars
>> +	local this_section="__git_first_level_config_vars_for_section_${section}"
>> +	test -n "${!this_section}" ||
>> +	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
>> +}
> 
> I've been wondering a bit why we store the result in a global variable.
> The value certainly isn't reused in the completion scripts here. It took
> me quite some time to realize though that it's going to end up in the
> user's shell environment even after completion finishes so that it can
> be reused the next time we invoke the completion function.
> 
> While this does feel a tad weird to me to be stateful like this across
> completion calls, we use the same pattern for `__git_config_vars` and
> `__git_config_sections`. So I guess it should be fine given that there
> is precedent.

Yes, I used this pattern because it was already used for other variables in 
the script, __git_config_vars and __git_config_sections are some examples,

    git grep 'test -n .* ||' contrib/completion/git-completion.bash

finds also others. I think the idea is to cache these lists to avoid 
computing them everytime they are needed (probably most useful on Windows 
where process creation is longer). I'll mention that in the 
commit message.


>>  __git_config_sections=
>>  __git_compute_config_sections ()
>>  {
>> @@ -2749,8 +2758,11 @@ __git_complete_config_variable_name ()
>>  	branch.*)
>>  		local pfx="${cur_%.*}."
>>  		cur_="${cur_#*.}"
>> +		local section="${pfx%.}"
>>  		__gitcomp_direct "$(__git_heads "$pfx" "$cur_" ".")"
>> -		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx:- }"
>> +		__git_compute_first_level_config_vars_for_section "${section}"
>> +		local this_section="__git_first_level_config_vars_for_section_${section}"
>> +		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
>>  		return
>>  		;;
>>  	guitool.*.*)
>> @@ -2799,8 +2811,11 @@ __git_complete_config_variable_name ()
>>  	remote.*)
>>  		local pfx="${cur_%.*}."
>>  		cur_="${cur_#*.}"
>> +		local section="${pfx%.}"
>>  		__gitcomp_nl "$(__git_remotes)" "$pfx" "$cur_" "."
>> -		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
>> +		__git_compute_first_level_config_vars_for_section "${section}"
>> +		local this_section="__git_first_level_config_vars_for_section_${section}"
>> +		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
>>  		return
>>  		;;
>>  	submodule.*.*)
>> @@ -2812,8 +2827,11 @@ __git_complete_config_variable_name ()
>>  	submodule.*)
>>  		local pfx="${cur_%.*}."
>>  		cur_="${cur_#*.}"
>> +		local section="${pfx%.}"
>>  		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
>> -		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
>> +		__git_compute_first_level_config_vars_for_section "${section}"
>> +		local this_section="__git_first_level_config_vars_for_section_${section}"
>> +		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
>>  		return
>>  		;;
>>  	url.*.*)
>> diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
>> index 35eb534fdda..f28d8f531b7 100755
>> --- a/t/t9902-completion.sh
>> +++ b/t/t9902-completion.sh
>> @@ -2583,6 +2583,17 @@ test_expect_success 'git config - variable name include' '
>>  	EOF
>>  '
>>  
>> +test_expect_success 'git config - variable name - __git_compute_first_level_config_vars_for_section' '
>> +	test_completion "git config submodule." <<-\EOF
>> +	submodule.active Z
>> +	submodule.alternateErrorStrategy Z
>> +	submodule.alternateLocation Z
>> +	submodule.fetchJobs Z
>> +	submodule.propagateBranches Z
>> +	submodule.recurse Z
>> +	EOF
>> +'
>> +
> 
> Shouldn't we verify that we know to complete both first-level config
> vars as well as the user-specified submodule names here?

Yes that would be more complete indeed, but it would then make more
sense to add that test in 2/5 since __git_compute_first_level_config_vars_for_section
is not involved in determining submodule names.

I'll make that change, thanks.

Philippe.

Re: [PATCH v2 3/5] completion: add and use __git_compute_first_level_config_vars_for_section

[Junio C Hamano]

Philippe Blain <levraiphilippeblain@gmail.com> writes:

>>> +	__git_compute_config_vars
>>> +	local this_section="__git_first_level_config_vars_for_section_${section}"
>>> +	test -n "${!this_section}" ||
>>> +	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
>>> +}

A silly question (primarily because I do not much use the indirect
reference construct ${!name}).  Does the assignment with printf need
to spell out the long variable name with "_${section}"?  Can it be

    printf -v "$this_section" ...

instead, as we already have the short-hand for it?

> finds also others. I think the idea is to cache these lists to avoid 
> computing them everytime they are needed (probably most useful on Windows 
> where process creation is longer). I'll mention that in the 
> commit message.

Yup, as long as the contents of the list stays stable (e.g., list of
Git subcommands, list of options a Git subcommand takes, list of
configuration variable names that do not have end-user customization
part, etc.), it is a viable optimization technique.  The available
<slot> for color.branch.<slot> and color.diff.<slot> do not change
(unless you talk about new version of Git adding support for more
slots) and is a good idea to cache.  remote.<name>.url takes its
<name> component out of an unbound set of end-user controlled names,
so unless we somehow have a method to invalidate cached values, the
list can go stale as remotes are added and removed.

Thanks.

Re: [PATCH v2 3/5] completion: add and use __git_compute_first_level_config_vars_for_section

[Philippe Blain]

Hi Junio,

Le 2024-02-10 à 12:15, Junio C Hamano a écrit :
> Philippe Blain <levraiphilippeblain@gmail.com> writes:
> 
>>>> +	__git_compute_config_vars
>>>> +	local this_section="__git_first_level_config_vars_for_section_${section}"
>>>> +	test -n "${!this_section}" ||
>>>> +	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
>>>> +}
> 
> A silly question (primarily because I do not much use the indirect
> reference construct ${!name}).  Does the assignment with printf need
> to spell out the long variable name with "_${section}"?  Can it be
> 
>     printf -v "$this_section" ...
> 
> instead, as we already have the short-hand for it?

No, unfortunately neither "$this_section" nor "${!this_section}"
work, so we must use the long name.

> 
>> finds also others. I think the idea is to cache these lists to avoid 
>> computing them everytime they are needed (probably most useful on Windows 
>> where process creation is longer). I'll mention that in the 
>> commit message.
> 
> Yup, as long as the contents of the list stays stable (e.g., list of
> Git subcommands, list of options a Git subcommand takes, list of
> configuration variable names that do not have end-user customization
> part, etc.), it is a viable optimization technique.  The available
> <slot> for color.branch.<slot> and color.diff.<slot> do not change
> (unless you talk about new version of Git adding support for more
> slots) and is a good idea to cache.  remote.<name>.url takes its
> <name> component out of an unbound set of end-user controlled names,
> so unless we somehow have a method to invalidate cached values, the
> list can go stale as remotes are added and removed.

Indeed. Here I'm caching Git config variables, not any user-defined names,
so these are stable.

Thanks,

Philippe.
 

Re: [PATCH v2 3/5] completion: add and use __git_compute_first_level_config_vars_for_section

[Junio C Hamano]

Philippe Blain <levraiphilippeblain@gmail.com> writes:

>> A silly question (primarily because I do not much use the indirect
>> reference construct ${!name}).  Does the assignment with printf need
>> to spell out the long variable name with "_${section}"?  Can it be
>> 
>>     printf -v "$this_section" ...
>> 
>> instead, as we already have the short-hand for it?
>
> No, unfortunately neither "$this_section" nor "${!this_section}"
> work, so we must use the long name.

Hmph, this does not match my experiment, though.  What am I doing
wrong?

        bash$ vname=foo
        bash$ foo=bar
        bash$ set | grep foo
        foo=bar
        vname=foo
        bash$ printf -v "$vname" "%d" 1234
        bash$ set | grep foo
        foo=1234
        vname=foo
        bash$ echo $BASH_VERSION
        5.2.21(1)-release

[PATCH v2 4/5] builtin/help: add --config-all-for-completion

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

There is currently no machine-friendly way to show _all_ configuration
variables from the command line. 'git help --config' does show them all,
but it also sets up the pager. 'git help --config-for-completion' omits
some variables (those containing wildcards, for example) and 'git help
--config-section-for-completion' shows only top-level section names.

In a following commit we will want to have access to a list of all
configuration variables from the Bash completion script. As such, add a
new mode for the command, HELP_ACTION_CONFIG_ALL_FOR_COMPLETION,
triggered by the new option '--config-all-for-completion'. In this mode,
show all variables, just as HELP_ACTION_CONFIG, but do not set up the
pager.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 builtin/help.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/builtin/help.c b/builtin/help.c
index dc1fbe2b986..dacaeb10bf4 100644
--- a/builtin/help.c
+++ b/builtin/help.c
@@ -50,6 +50,7 @@ static enum help_action {
 	HELP_ACTION_DEVELOPER_INTERFACES,
 	HELP_ACTION_CONFIG_FOR_COMPLETION,
 	HELP_ACTION_CONFIG_SECTIONS_FOR_COMPLETION,
+	HELP_ACTION_CONFIG_ALL_FOR_COMPLETION,
 } cmd_mode;
 
 static const char *html_path;
@@ -86,6 +87,8 @@ static struct option builtin_help_options[] = {
 		    HELP_ACTION_CONFIG_FOR_COMPLETION, PARSE_OPT_HIDDEN),
 	OPT_CMDMODE_F(0, "config-sections-for-completion", &cmd_mode, "",
 		    HELP_ACTION_CONFIG_SECTIONS_FOR_COMPLETION, PARSE_OPT_HIDDEN),
+	OPT_CMDMODE_F(0, "config-all-for-completion", &cmd_mode, "",
+		    HELP_ACTION_CONFIG_ALL_FOR_COMPLETION, PARSE_OPT_HIDDEN),
 
 	OPT_END(),
 };
@@ -670,6 +673,10 @@ int cmd_help(int argc, const char **argv, const char *prefix)
 		opt_mode_usage(argc, "--config-for-completion", help_format);
 		list_config_help(SHOW_CONFIG_VARS);
 		return 0;
+	case HELP_ACTION_CONFIG_ALL_FOR_COMPLETION:
+		opt_mode_usage(argc, "--config-all-for-completion", help_format);
+		list_config_help(SHOW_CONFIG_HUMAN);
+		return 0;
 	case HELP_ACTION_USER_INTERFACES:
 		opt_mode_usage(argc, "--user-interfaces", help_format);
 		list_user_interfaces_help();
-- 
gitgitgadget

Re: [PATCH v2 4/5] builtin/help: add --config-all-for-completion

[Patrick Steinhardt]

[-- Attachment #1: Type: text/plain, Size: 2709 bytes --]

On Mon, Jan 29, 2024 at 01:28:00PM +0000, Philippe Blain via GitGitGadget wrote:
> From: Philippe Blain <levraiphilippeblain@gmail.com>
> 
> There is currently no machine-friendly way to show _all_ configuration
> variables from the command line. 'git help --config' does show them all,
> but it also sets up the pager. 'git help --config-for-completion' omits
> some variables (those containing wildcards, for example) and 'git help
> --config-section-for-completion' shows only top-level section names.

You can invoke `git --no-pager help --config` so that Git does not set
up the pager. Is there a reason why we can't use that?

> In a following commit we will want to have access to a list of all
> configuration variables from the Bash completion script. As such, add a
> new mode for the command, HELP_ACTION_CONFIG_ALL_FOR_COMPLETION,
> triggered by the new option '--config-all-for-completion'. In this mode,
> show all variables, just as HELP_ACTION_CONFIG, but do not set up the
> pager.
> 
> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
> ---
>  builtin/help.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/builtin/help.c b/builtin/help.c
> index dc1fbe2b986..dacaeb10bf4 100644
> --- a/builtin/help.c
> +++ b/builtin/help.c
> @@ -50,6 +50,7 @@ static enum help_action {
>  	HELP_ACTION_DEVELOPER_INTERFACES,
>  	HELP_ACTION_CONFIG_FOR_COMPLETION,
>  	HELP_ACTION_CONFIG_SECTIONS_FOR_COMPLETION,
> +	HELP_ACTION_CONFIG_ALL_FOR_COMPLETION,
>  } cmd_mode;
>  
>  static const char *html_path;
> @@ -86,6 +87,8 @@ static struct option builtin_help_options[] = {
>  		    HELP_ACTION_CONFIG_FOR_COMPLETION, PARSE_OPT_HIDDEN),
>  	OPT_CMDMODE_F(0, "config-sections-for-completion", &cmd_mode, "",
>  		    HELP_ACTION_CONFIG_SECTIONS_FOR_COMPLETION, PARSE_OPT_HIDDEN),
> +	OPT_CMDMODE_F(0, "config-all-for-completion", &cmd_mode, "",
> +		    HELP_ACTION_CONFIG_ALL_FOR_COMPLETION, PARSE_OPT_HIDDEN),
>  
>  	OPT_END(),
>  };
> @@ -670,6 +673,10 @@ int cmd_help(int argc, const char **argv, const char *prefix)
>  		opt_mode_usage(argc, "--config-for-completion", help_format);
>  		list_config_help(SHOW_CONFIG_VARS);
>  		return 0;
> +	case HELP_ACTION_CONFIG_ALL_FOR_COMPLETION:
> +		opt_mode_usage(argc, "--config-all-for-completion", help_format);
> +		list_config_help(SHOW_CONFIG_HUMAN);
> +		return 0;
>  	case HELP_ACTION_USER_INTERFACES:
>  		opt_mode_usage(argc, "--user-interfaces", help_format);
>  		list_user_interfaces_help();

We should add a testcase to "t0012-help.sh" to exercise this new
feature. That would also help show the reviewer what exactly it will end
up printing.

Patrick

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 4/5] builtin/help: add --config-all-for-completion

[Philippe Blain]

Le 2024-02-08 à 02:42, Patrick Steinhardt a écrit :
> On Mon, Jan 29, 2024 at 01:28:00PM +0000, Philippe Blain via GitGitGadget wrote:
>> From: Philippe Blain <levraiphilippeblain@gmail.com>
>>
>> There is currently no machine-friendly way to show _all_ configuration
>> variables from the command line. 'git help --config' does show them all,
>> but it also sets up the pager. 'git help --config-for-completion' omits
>> some variables (those containing wildcards, for example) and 'git help
>> --config-section-for-completion' shows only top-level section names.
> 
> You can invoke `git --no-pager help --config` so that Git does not set
> up the pager. Is there a reason why we can't use that?

I'm glad to say there is no reason we can't use that! I just did not
think of it and dived straight into the C code. I'll use that in v3 and
just drop this patch from the series.

Thanks!

Philippe.

[PATCH v2 5/5] completion: add an use __git_compute_second_level_config_vars_for_section

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

In a previous commit we removed some hardcoded config variable names from
function __git_complete_config_variable_name in the completion script by
introducing a new function,
__git_compute_first_level_config_vars_for_section.

The remaining hardcoded config variables are "second level"
configuration variables, meaning 'branch.<name>.upstream',
'remote.<name>.url', etc. where <name> is a user-defined name.

Making use of the new --config-all-for-completion flag to 'git help'
introduced in the previous commit, add a new function,
__git_compute_second_level_config_vars_for_section. This function takes
as argument a config section name and computes the corresponding
second-level config variables, i.e. those that contain a '<' which
indicates the start of a placeholder. Note that as in
__git_compute_first_level_config_vars_for_section added previsouly, we
use indirect expansion instead of associative arrays to stay compatible
with Bash 3 on which macOS is stuck for licensing reasons.

Use this new function and the variables it defines in
__git_complete_config_variable_name to remove hardcoded config
variables, and add a test to verify the new function.  Use a single
'case' for all sections with second-level variables names, since the
code for each of them is now exactly the same.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 71 ++++++++------------------
 t/t9902-completion.sh                  | 10 ++++
 2 files changed, 31 insertions(+), 50 deletions(-)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 2934ceb7637..0e8fd63bfdb 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2596,6 +2596,13 @@ __git_compute_config_vars ()
 	__git_config_vars="$(git help --config-for-completion)"
 }
 
+__git_config_vars_all=
+__git_compute_config_vars_all ()
+{
+	test -n "$__git_config_vars_all" ||
+	__git_config_vars_all="$(git help --config-all-for-completion)"
+}
+
 __git_compute_first_level_config_vars_for_section ()
 {
 	section="$1"
@@ -2605,6 +2612,15 @@ __git_compute_first_level_config_vars_for_section ()
 	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
 }
 
+__git_compute_second_level_config_vars_for_section ()
+{
+	section="$1"
+	__git_compute_config_vars_all
+	local this_section="__git_second_level_config_vars_for_section_${section}"
+	test -n "${!this_section}" ||
+	printf -v "__git_second_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars_all" | grep -E "^${section}\.<" | awk -F. '{print $3}')"
+}
+
 __git_config_sections=
 __git_compute_config_sections ()
 {
@@ -2749,10 +2765,13 @@ __git_complete_config_variable_name ()
 	done
 
 	case "$cur_" in
-	branch.*.*)
+	branch.*.*|guitool.*.*|difftool.*.*|man.*.*|mergetool.*.*|remote.*.*|submodule.*.*|url.*.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_##*.}"
-		__gitcomp "remote pushRemote merge mergeOptions rebase" "$pfx" "$cur_" "$sfx"
+		local section="${pfx%.*.}"
+		__git_compute_second_level_config_vars_for_section "${section}"
+		local this_section="__git_second_level_config_vars_for_section_${section}"
+		__gitcomp "${!this_section}" "$pfx" "$cur_" "$sfx"
 		return
 		;;
 	branch.*)
@@ -2765,33 +2784,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	guitool.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "
-			argPrompt cmd confirm needsFile noConsole noRescan
-			prompt revPrompt revUnmerged title
-			" "$pfx" "$cur_" "$sfx"
-		return
-		;;
-	difftool.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "cmd path" "$pfx" "$cur_" "$sfx"
-		return
-		;;
-	man.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "cmd path" "$pfx" "$cur_" "$sfx"
-		return
-		;;
-	mergetool.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "cmd path trustExitCode" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	pager.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
@@ -2799,15 +2791,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl "$__git_all_commands" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	remote.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "
-			url proxy fetch push mirror skipDefaultUpdate
-			receivepack uploadpack tagOpt pushurl
-			" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	remote.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
@@ -2818,12 +2801,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	submodule.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "url update branch fetchRecurseSubmodules ignore active" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	submodule.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
@@ -2834,12 +2811,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	url.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "insteadOf pushInsteadOf" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	*.*)
 		__git_compute_config_vars
 		__gitcomp "$__git_config_vars" "" "$cur_" "$sfx"
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index f28d8f531b7..24ff786b273 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -2593,6 +2593,16 @@ test_expect_success 'git config - variable name - __git_compute_first_level_conf
 	submodule.recurse Z
 	EOF
 '
+test_expect_success 'git config - variable name - __git_compute_second_level_config_vars_for_section' '
+	test_completion "git config branch.main." <<-\EOF
+	branch.main.description Z
+	branch.main.remote Z
+	branch.main.pushRemote Z
+	branch.main.merge Z
+	branch.main.mergeOptions Z
+	branch.main.rebase Z
+	EOF
+'
 
 test_expect_success 'git config - value' '
 	test_completion "git config color.pager " <<-\EOF
-- 
gitgitgadget

Re: [PATCH v2 5/5] completion: add an use __git_compute_second_level_config_vars_for_section

[Patrick Steinhardt]

[-- Attachment #1: Type: text/plain, Size: 2477 bytes --]

On Mon, Jan 29, 2024 at 01:28:01PM +0000, Philippe Blain via GitGitGadget wrote:
> From: Philippe Blain <levraiphilippeblain@gmail.com>
[snip]
> diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
> index 2934ceb7637..0e8fd63bfdb 100644
> --- a/contrib/completion/git-completion.bash
> +++ b/contrib/completion/git-completion.bash
> @@ -2605,6 +2612,15 @@ __git_compute_first_level_config_vars_for_section ()
>  	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
>  }
>  
> +__git_compute_second_level_config_vars_for_section ()
> +{
> +	section="$1"

This should be `local section`, as well.

> +	__git_compute_config_vars_all
> +	local this_section="__git_second_level_config_vars_for_section_${section}"
> +	test -n "${!this_section}" ||
> +	printf -v "__git_second_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars_all" | grep -E "^${section}\.<" | awk -F. '{print $3}')"
> +}
> +
>  __git_config_sections=
>  __git_compute_config_sections ()
>  {
> @@ -2749,10 +2765,13 @@ __git_complete_config_variable_name ()
>  	done
>  
>  	case "$cur_" in
> -	branch.*.*)
> +	branch.*.*|guitool.*.*|difftool.*.*|man.*.*|mergetool.*.*|remote.*.*|submodule.*.*|url.*.*)
>  		local pfx="${cur_%.*}."
>  		cur_="${cur_##*.}"
> -		__gitcomp "remote pushRemote merge mergeOptions rebase" "$pfx" "$cur_" "$sfx"
> +		local section="${pfx%.*.}"
> +		__git_compute_second_level_config_vars_for_section "${section}"
> +		local this_section="__git_second_level_config_vars_for_section_${section}"
> +		__gitcomp "${!this_section}" "$pfx" "$cur_" "$sfx"
>  		return
>  		;;

Nice.

[snip]
> diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
> index f28d8f531b7..24ff786b273 100755
> --- a/t/t9902-completion.sh
> +++ b/t/t9902-completion.sh
> @@ -2593,6 +2593,16 @@ test_expect_success 'git config - variable name - __git_compute_first_level_conf
>  	submodule.recurse Z
>  	EOF
>  '

Missing a newline.

> +test_expect_success 'git config - variable name - __git_compute_second_level_config_vars_for_section' '
> +	test_completion "git config branch.main." <<-\EOF
> +	branch.main.description Z
> +	branch.main.remote Z
> +	branch.main.pushRemote Z
> +	branch.main.merge Z
> +	branch.main.mergeOptions Z
> +	branch.main.rebase Z
> +	EOF
> +'

Patrick

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 5/5] completion: add an use __git_compute_second_level_config_vars_for_section

[Philippe Blain]

Le 2024-02-08 à 02:42, Patrick Steinhardt a écrit :
> On Mon, Jan 29, 2024 at 01:28:01PM +0000, Philippe Blain via GitGitGadget wrote:
>> From: Philippe Blain <levraiphilippeblain@gmail.com>
> [snip]
>> diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
>> index 2934ceb7637..0e8fd63bfdb 100644
>> --- a/contrib/completion/git-completion.bash
>> +++ b/contrib/completion/git-completion.bash
>> @@ -2605,6 +2612,15 @@ __git_compute_first_level_config_vars_for_section ()
>>  	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
>>  }
>>  
>> +__git_compute_second_level_config_vars_for_section ()
>> +{
>> +	section="$1"
> 
> This should be `local section`, as well.

Thanks, fixed.

 
> [snip]
>> diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
>> index f28d8f531b7..24ff786b273 100755
>> --- a/t/t9902-completion.sh
>> +++ b/t/t9902-completion.sh
>> @@ -2593,6 +2593,16 @@ test_expect_success 'git config - variable name - __git_compute_first_level_conf
>>  	submodule.recurse Z
>>  	EOF
>>  '
> 
> Missing a newline.

Fixed. 

Thank you again for your review Patrick, much appreciated.

Philippe.

Re: [PATCH v2 0/5] completion: remove hardcoded config variable names

[Junio C Hamano]

"Philippe Blain via GitGitGadget" <gitgitgadget@gmail.com> writes:

> Changes since v1:
>
>  * Corrected my email in PATCH 2/5 (sorry for the noise)
>
> v1: This series removes hardcoded config variable names in the
> __git_complete_config_variable_name function, partly by adding a new mode to
> 'git help'. It also adds completion for 'submodule.*' config variables,
> which were previously missing.
>
> I think it makes sense to do that in the same series since it's closely
> related, and splitting it would result in textual conflicts between both
> series if one does not build on top of the other, but I'm open to other
> suggestions.
>
> Thanks,

Neither rounds of this series unfortunately got any review.
Comments from anybody interested in helping to improve completion
scripts?

Thanks.

Re: [PATCH v2 0/5] completion: remove hardcoded config variable names

[Patrick Steinhardt]

[-- Attachment #1: Type: text/plain, Size: 1172 bytes --]

On Wed, Feb 07, 2024 at 02:08:07PM -0800, Junio C Hamano wrote:
> "Philippe Blain via GitGitGadget" <gitgitgadget@gmail.com> writes:
> 
> > Changes since v1:
> >
> >  * Corrected my email in PATCH 2/5 (sorry for the noise)
> >
> > v1: This series removes hardcoded config variable names in the
> > __git_complete_config_variable_name function, partly by adding a new mode to
> > 'git help'. It also adds completion for 'submodule.*' config variables,
> > which were previously missing.
> >
> > I think it makes sense to do that in the same series since it's closely
> > related, and splitting it would result in textual conflicts between both
> > series if one does not build on top of the other, but I'm open to other
> > suggestions.
> >
> > Thanks,
> 
> Neither rounds of this series unfortunately got any review.
> Comments from anybody interested in helping to improve completion
> scripts?

Well, I've spent some time with Bash completion recently, so let me give
it a go. I was trying to avoid the dense Bash logic and thus shied away
from reviewing it. But the end result of having less hardcoded values is
quite nice indeed.

Patrick

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH v3 0/4] completion: remove hardcoded config variable names

[Philippe Blain via GitGitGadget]

Changes since v2:

 * Moved the addition of the tests to 2/4, and tweaked 3/4 and 4/4 so they
   simply adjust the test names
 * Added a test for user-defined submodule names, as suggested by Patrick
 * Added more details in the commit message of 3/4 around the use of global
   variables as caches
 * Slightly improved commit message wording and fixed typos
 * Added 'local' where suggested
 * Dropped 4/5 which modified 'git help', since it's not needed (thanks
   Patrick!)

Changes since v1:

 * Corrected my email in PATCH 2/5 (sorry for the noise)

v1: This series removes hardcoded config variable names in the
__git_complete_config_variable_name function, partly by adding a new mode to
'git help'. It also adds completion for 'submodule.*' config variables,
which were previously missing.

I think it makes sense to do that in the same series since it's closely
related, and splitting it would result in textual conflicts between both
series if one does not build on top of the other, but I'm open to other
suggestions.

Thanks,

Philippe.

Philippe Blain (4):
  completion: add space after config variable names also in Bash 3
  completion: complete 'submodule.*' config variables
  completion: add and use
    __git_compute_first_level_config_vars_for_section
  completion: add and use
    __git_compute_second_level_config_vars_for_section

 contrib/completion/git-completion.bash | 90 +++++++++++++-------------
 t/t9902-completion.sh                  | 29 +++++++++
 2 files changed, 75 insertions(+), 44 deletions(-)


base-commit: b50a608ba20348cb3dfc16a696816d51780e3f0f
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-git-1660%2Fphil-blain%2Fcompletion-submodule-config-v3
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-git-1660/phil-blain/completion-submodule-config-v3
Pull-Request: https://github.com/git/git/pull/1660

Range-diff vs v2:

 1:  837d92a6c27 = 1:  837d92a6c27 completion: add space after config variable names also in Bash 3
 2:  426374ff9b3 ! 2:  6b75582ee35 completion: complete 'submodule.*' config variables
     @@ Commit message
          Add the appropriate branches to the case statement, making use of the
          in-tree '.gitmodules' to list relevant submodules.
      
     +    Add corresponding tests in t9902-completion.sh, making sure we complete
     +    both first level submodule config variables as well as second level
     +    variables involving submodule names.
     +
          Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
      
       ## contrib/completion/git-completion.bash ##
     @@ contrib/completion/git-completion.bash: __git_complete_config_variable_name ()
       	url.*.*)
       		local pfx="${cur_%.*}."
       		cur_="${cur_##*.}"
     +
     + ## t/t9902-completion.sh ##
     +@@ t/t9902-completion.sh: test_expect_success 'git config - variable name include' '
     + 	EOF
     + '
     + 
     ++test_expect_success 'setup for git config submodule tests' '
     ++	test_create_repo sub &&
     ++	test_commit -C sub initial &&
     ++	git submodule add ./sub
     ++'
     ++
     ++test_expect_success 'git config - variable name - submodule' '
     ++	test_completion "git config submodule." <<-\EOF
     ++	submodule.active Z
     ++	submodule.alternateErrorStrategy Z
     ++	submodule.alternateLocation Z
     ++	submodule.fetchJobs Z
     ++	submodule.propagateBranches Z
     ++	submodule.recurse Z
     ++	submodule.sub.Z
     ++	EOF
     ++'
     ++
     ++test_expect_success 'git config - variable name - submodule names' '
     ++	test_completion "git config submodule.sub." <<-\EOF
     ++	submodule.sub.url Z
     ++	submodule.sub.update Z
     ++	submodule.sub.branch Z
     ++	submodule.sub.fetchRecurseSubmodules Z
     ++	submodule.sub.ignore Z
     ++	submodule.sub.active Z
     ++	EOF
     ++'
     ++
     + test_expect_success 'git config - value' '
     + 	test_completion "git config color.pager " <<-\EOF
     + 	false Z
 3:  838aabf2858 ! 3:  fb210325394 completion: add and use __git_compute_first_level_config_vars_for_section
     @@ Commit message
      
          The function __git_complete_config_variable_name in the Bash completion
          script hardcodes several config variable names. These variables are
     -    those in config section where user-defined names can appear, such as
     +    those in config sections where user-defined names can appear, such as
          "branch.<name>". These sections are treated first by the case statement,
          and the two last "catch all" cases are used for other sections, making
          use of the __git_compute_config_vars and __git_compute_config_sections
     @@ Commit message
          like 'branch.autoSetupMerge, 'remote.pushDefault', etc.  Use this
          function and the variables it defines in the 'branch.*', 'remote.*' and
          'submodule.*' switches of the case statement instead of hardcoding the
     -    corresponding config variables.  Note that we use indirect expansion
     -    instead of associative arrays because those are not supported in Bash 3,
     -    on which macOS is stuck for licensing reasons.
     +    corresponding config variables.  Note that we use indirect expansion to
     +    create a variable for each section, instead of using a single
     +    associative array indexed by section names, because associative arrays
     +    are not supported in Bash 3, on which macOS is stuck for licensing
     +    reasons.
      
     -    Add a test to make sure the new function works correctly by verfying it
     -    lists all 'submodule' config variables. This has the downside that this
     -    test must be updated when new 'submodule' configuration are added, but
     -    this should be a small burden since it happens infrequently.
     +    Use the existing pattern in the completion script of using global
     +    variables to cache the list of config variables for each section. The
     +    rationale for such caching is explained in eaa4e6ee2a (Speed up bash
     +    completion loading, 2009-11-17), and the current approach to using and
     +    defining them via 'test -n' is explained in cf0ff02a38 (completion: work
     +    around zsh option propagation bug, 2012-02-02).
     +
     +    Adjust the name of one of the tests added in the previous commit,
     +    reflecting that it now also tests the new function.
      
          Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
      
     @@ contrib/completion/git-completion.bash: __git_compute_config_vars ()
       
      +__git_compute_first_level_config_vars_for_section ()
      +{
     -+	section="$1"
     ++	local section="$1"
      +	__git_compute_config_vars
      +	local this_section="__git_first_level_config_vars_for_section_${section}"
      +	test -n "${!this_section}" ||
     @@ contrib/completion/git-completion.bash: __git_complete_config_variable_name ()
       	url.*.*)
      
       ## t/t9902-completion.sh ##
     -@@ t/t9902-completion.sh: test_expect_success 'git config - variable name include' '
     - 	EOF
     +@@ t/t9902-completion.sh: test_expect_success 'setup for git config submodule tests' '
     + 	git submodule add ./sub
       '
       
     -+test_expect_success 'git config - variable name - __git_compute_first_level_config_vars_for_section' '
     -+	test_completion "git config submodule." <<-\EOF
     -+	submodule.active Z
     -+	submodule.alternateErrorStrategy Z
     -+	submodule.alternateLocation Z
     -+	submodule.fetchJobs Z
     -+	submodule.propagateBranches Z
     -+	submodule.recurse Z
     -+	EOF
     -+'
     -+
     - test_expect_success 'git config - value' '
     - 	test_completion "git config color.pager " <<-\EOF
     - 	false Z
     +-test_expect_success 'git config - variable name - submodule' '
     ++test_expect_success 'git config - variable name - submodule and __git_compute_first_level_config_vars_for_section' '
     + 	test_completion "git config submodule." <<-\EOF
     + 	submodule.active Z
     + 	submodule.alternateErrorStrategy Z
 4:  d442a039b27 < -:  ----------- builtin/help: add --config-all-for-completion
 5:  a2e792c911e ! 4:  69fc02bb6b4 completion: add an use __git_compute_second_level_config_vars_for_section
     @@ Metadata
      Author: Philippe Blain <levraiphilippeblain@gmail.com>
      
       ## Commit message ##
     -    completion: add an use __git_compute_second_level_config_vars_for_section
     +    completion: add and use __git_compute_second_level_config_vars_for_section
      
          In a previous commit we removed some hardcoded config variable names from
          function __git_complete_config_variable_name in the completion script by
     @@ Commit message
          configuration variables, meaning 'branch.<name>.upstream',
          'remote.<name>.url', etc. where <name> is a user-defined name.
      
     -    Making use of the new --config-all-for-completion flag to 'git help'
     -    introduced in the previous commit, add a new function,
     -    __git_compute_second_level_config_vars_for_section. This function takes
     -    as argument a config section name and computes the corresponding
     -    second-level config variables, i.e. those that contain a '<' which
     -    indicates the start of a placeholder. Note that as in
     +    Making use of the new existing --config flag to 'git help', add a new
     +    function, __git_compute_second_level_config_vars_for_section. This
     +    function takes as argument a config section name and computes the
     +    corresponding second-level config variables, i.e. those that contain a
     +    '<' which indicates the start of a placeholder. Note that as in
          __git_compute_first_level_config_vars_for_section added previsouly, we
          use indirect expansion instead of associative arrays to stay compatible
          with Bash 3 on which macOS is stuck for licensing reasons.
      
     +    As explained in the previous commit, we use the existing pattern in the
     +    completion script of using global variables to cache the list of
     +    variables for each section.
     +
          Use this new function and the variables it defines in
          __git_complete_config_variable_name to remove hardcoded config
          variables, and add a test to verify the new function.  Use a single
          'case' for all sections with second-level variables names, since the
          code for each of them is now exactly the same.
      
     +    Adjust the name of a test added in a previous commit to reflect that it
     +    now tests the added function.
     +
          Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
      
       ## contrib/completion/git-completion.bash ##
     @@ contrib/completion/git-completion.bash: __git_compute_config_vars ()
      +__git_compute_config_vars_all ()
      +{
      +	test -n "$__git_config_vars_all" ||
     -+	__git_config_vars_all="$(git help --config-all-for-completion)"
     ++	__git_config_vars_all="$(git --no-pager help --config)"
      +}
      +
       __git_compute_first_level_config_vars_for_section ()
       {
     - 	section="$1"
     + 	local section="$1"
      @@ contrib/completion/git-completion.bash: __git_compute_first_level_config_vars_for_section ()
       	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
       }
       
      +__git_compute_second_level_config_vars_for_section ()
      +{
     -+	section="$1"
     ++	local section="$1"
      +	__git_compute_config_vars_all
      +	local this_section="__git_second_level_config_vars_for_section_${section}"
      +	test -n "${!this_section}" ||
     @@ contrib/completion/git-completion.bash: __git_complete_config_variable_name ()
       		__gitcomp "$__git_config_vars" "" "$cur_" "$sfx"
      
       ## t/t9902-completion.sh ##
     -@@ t/t9902-completion.sh: test_expect_success 'git config - variable name - __git_compute_first_level_conf
     - 	submodule.recurse Z
     +@@ t/t9902-completion.sh: test_expect_success 'git config - variable name - submodule and __git_compute_fi
       	EOF
       '
     -+test_expect_success 'git config - variable name - __git_compute_second_level_config_vars_for_section' '
     -+	test_completion "git config branch.main." <<-\EOF
     -+	branch.main.description Z
     -+	branch.main.remote Z
     -+	branch.main.pushRemote Z
     -+	branch.main.merge Z
     -+	branch.main.mergeOptions Z
     -+	branch.main.rebase Z
     -+	EOF
     -+'
       
     - test_expect_success 'git config - value' '
     - 	test_completion "git config color.pager " <<-\EOF
     +-test_expect_success 'git config - variable name - submodule names' '
     ++test_expect_success 'git config - variable name - __git_compute_second_level_config_vars_for_section' '
     + 	test_completion "git config submodule.sub." <<-\EOF
     + 	submodule.sub.url Z
     + 	submodule.sub.update Z

-- 
gitgitgadget

[PATCH v3 1/4] completion: add space after config variable names also in Bash 3

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

In be6444d1ca (completion: bash: add correct suffix in variables,
2021-08-16), __git_complete_config_variable_name was changed to use
"${sfx- }" instead of "$sfx" as the fourth argument of _gitcomp_nl and
_gitcomp_nl_append, such that this argument evaluates to a space if sfx
is unset. This was to ensure that e.g.

	git config branch.autoSetupMe[TAB]

correctly completes to 'branch.autoSetupMerge ' with the trailing space.
This commits notes that the fix only works in Bash 4 because in Bash 3
the 'local sfx' construct at the beginning of
__git_complete_config_variable_name creates an empty string.

Make the fix also work for Bash 3 by using the "unset or null' parameter
expansion syntax ("${sfx:- }"), such that the parameter is also expanded
to a space if it is set but null, as is the behaviour of 'local sfx' in
Bash 3.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 6662db221df..159a4fd8add 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2750,7 +2750,7 @@ __git_complete_config_variable_name ()
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
 		__gitcomp_direct "$(__git_heads "$pfx" "$cur_" ".")"
-		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx- }"
+		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	guitool.*.*)
@@ -2784,7 +2784,7 @@ __git_complete_config_variable_name ()
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
 		__git_compute_all_commands
-		__gitcomp_nl "$__git_all_commands" "$pfx" "$cur_" "${sfx- }"
+		__gitcomp_nl "$__git_all_commands" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	remote.*.*)
@@ -2800,7 +2800,7 @@ __git_complete_config_variable_name ()
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
 		__gitcomp_nl "$(__git_remotes)" "$pfx" "$cur_" "."
-		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx- }"
+		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	url.*.*)
-- 
gitgitgadget

[PATCH v3 2/4] completion: complete 'submodule.*' config variables

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

In the Bash completion script, function
__git_complete_config_variable_name completes config variables and has
special logic to deal with config variables involving user-defined
names, like branch.<name>.* and remote.<name>.*.

This special logic is missing for submodule-related config variables.
Add the appropriate branches to the case statement, making use of the
in-tree '.gitmodules' to list relevant submodules.

Add corresponding tests in t9902-completion.sh, making sure we complete
both first level submodule config variables as well as second level
variables involving submodule names.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 13 ++++++++++++
 t/t9902-completion.sh                  | 29 ++++++++++++++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 159a4fd8add..8af9bc3f4e1 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2803,6 +2803,19 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
+	submodule.*.*)
+		local pfx="${cur_%.*}."
+		cur_="${cur_##*.}"
+		__gitcomp "url update branch fetchRecurseSubmodules ignore active" "$pfx" "$cur_" "$sfx"
+		return
+		;;
+	submodule.*)
+		local pfx="${cur_%.*}."
+		cur_="${cur_#*.}"
+		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
+		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
+		return
+		;;
 	url.*.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_##*.}"
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 35eb534fdda..23d0e71324c 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -2583,6 +2583,35 @@ test_expect_success 'git config - variable name include' '
 	EOF
 '
 
+test_expect_success 'setup for git config submodule tests' '
+	test_create_repo sub &&
+	test_commit -C sub initial &&
+	git submodule add ./sub
+'
+
+test_expect_success 'git config - variable name - submodule' '
+	test_completion "git config submodule." <<-\EOF
+	submodule.active Z
+	submodule.alternateErrorStrategy Z
+	submodule.alternateLocation Z
+	submodule.fetchJobs Z
+	submodule.propagateBranches Z
+	submodule.recurse Z
+	submodule.sub.Z
+	EOF
+'
+
+test_expect_success 'git config - variable name - submodule names' '
+	test_completion "git config submodule.sub." <<-\EOF
+	submodule.sub.url Z
+	submodule.sub.update Z
+	submodule.sub.branch Z
+	submodule.sub.fetchRecurseSubmodules Z
+	submodule.sub.ignore Z
+	submodule.sub.active Z
+	EOF
+'
+
 test_expect_success 'git config - value' '
 	test_completion "git config color.pager " <<-\EOF
 	false Z
-- 
gitgitgadget

[PATCH v3 3/4] completion: add and use __git_compute_first_level_config_vars_for_section

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

The function __git_complete_config_variable_name in the Bash completion
script hardcodes several config variable names. These variables are
those in config sections where user-defined names can appear, such as
"branch.<name>". These sections are treated first by the case statement,
and the two last "catch all" cases are used for other sections, making
use of the __git_compute_config_vars and __git_compute_config_sections
function, which omit listing any variables containing wildcards or
placeholders. Having hardcoded config variables introduces the risk of
the completion code becoming out of sync with the actual config
variables accepted by Git.

To avoid these hardcoded config variables, introduce a new function,
__git_compute_first_level_config_vars_for_section, making use of the
existing __git_config_vars variable. This function takes as argument a
config section name and computes the matching "first level" config
variables for that section, i.e. those _not_ containing any placeholder,
like 'branch.autoSetupMerge, 'remote.pushDefault', etc.  Use this
function and the variables it defines in the 'branch.*', 'remote.*' and
'submodule.*' switches of the case statement instead of hardcoding the
corresponding config variables.  Note that we use indirect expansion to
create a variable for each section, instead of using a single
associative array indexed by section names, because associative arrays
are not supported in Bash 3, on which macOS is stuck for licensing
reasons.

Use the existing pattern in the completion script of using global
variables to cache the list of config variables for each section. The
rationale for such caching is explained in eaa4e6ee2a (Speed up bash
completion loading, 2009-11-17), and the current approach to using and
defining them via 'test -n' is explained in cf0ff02a38 (completion: work
around zsh option propagation bug, 2012-02-02).

Adjust the name of one of the tests added in the previous commit,
reflecting that it now also tests the new function.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 24 +++++++++++++++++++++---
 t/t9902-completion.sh                  |  2 +-
 2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 8af9bc3f4e1..57a8da7ca1a 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2596,6 +2596,15 @@ __git_compute_config_vars ()
 	__git_config_vars="$(git help --config-for-completion)"
 }
 
+__git_compute_first_level_config_vars_for_section ()
+{
+	local section="$1"
+	__git_compute_config_vars
+	local this_section="__git_first_level_config_vars_for_section_${section}"
+	test -n "${!this_section}" ||
+	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
+}
+
 __git_config_sections=
 __git_compute_config_sections ()
 {
@@ -2749,8 +2758,11 @@ __git_complete_config_variable_name ()
 	branch.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
+		local section="${pfx%.}"
 		__gitcomp_direct "$(__git_heads "$pfx" "$cur_" ".")"
-		__gitcomp_nl_append $'autoSetupMerge\nautoSetupRebase\n' "$pfx" "$cur_" "${sfx:- }"
+		__git_compute_first_level_config_vars_for_section "${section}"
+		local this_section="__git_first_level_config_vars_for_section_${section}"
+		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	guitool.*.*)
@@ -2799,8 +2811,11 @@ __git_complete_config_variable_name ()
 	remote.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
+		local section="${pfx%.}"
 		__gitcomp_nl "$(__git_remotes)" "$pfx" "$cur_" "."
-		__gitcomp_nl_append "pushDefault" "$pfx" "$cur_" "${sfx:- }"
+		__git_compute_first_level_config_vars_for_section "${section}"
+		local this_section="__git_first_level_config_vars_for_section_${section}"
+		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	submodule.*.*)
@@ -2812,8 +2827,11 @@ __git_complete_config_variable_name ()
 	submodule.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
+		local section="${pfx%.}"
 		__gitcomp_nl "$(__git config -f "$(__git rev-parse --show-toplevel)/.gitmodules" --get-regexp 'submodule.*.path' | awk -F. '{print $2}')" "$pfx" "$cur_" "."
-		__gitcomp_nl_append $'alternateErrorStrategy\nfetchJobs\nactive\nalternateLocation\nrecurse\npropagateBranches' "$pfx" "$cur_" "${sfx:- }"
+		__git_compute_first_level_config_vars_for_section "${section}"
+		local this_section="__git_first_level_config_vars_for_section_${section}"
+		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
 	url.*.*)
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 23d0e71324c..8600b9e0dd9 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -2589,7 +2589,7 @@ test_expect_success 'setup for git config submodule tests' '
 	git submodule add ./sub
 '
 
-test_expect_success 'git config - variable name - submodule' '
+test_expect_success 'git config - variable name - submodule and __git_compute_first_level_config_vars_for_section' '
 	test_completion "git config submodule." <<-\EOF
 	submodule.active Z
 	submodule.alternateErrorStrategy Z
-- 
gitgitgadget

[PATCH v3 4/4] completion: add and use __git_compute_second_level_config_vars_for_section

[Philippe Blain via GitGitGadget]

From: Philippe Blain <levraiphilippeblain@gmail.com>

In a previous commit we removed some hardcoded config variable names from
function __git_complete_config_variable_name in the completion script by
introducing a new function,
__git_compute_first_level_config_vars_for_section.

The remaining hardcoded config variables are "second level"
configuration variables, meaning 'branch.<name>.upstream',
'remote.<name>.url', etc. where <name> is a user-defined name.

Making use of the new existing --config flag to 'git help', add a new
function, __git_compute_second_level_config_vars_for_section. This
function takes as argument a config section name and computes the
corresponding second-level config variables, i.e. those that contain a
'<' which indicates the start of a placeholder. Note that as in
__git_compute_first_level_config_vars_for_section added previsouly, we
use indirect expansion instead of associative arrays to stay compatible
with Bash 3 on which macOS is stuck for licensing reasons.

As explained in the previous commit, we use the existing pattern in the
completion script of using global variables to cache the list of
variables for each section.

Use this new function and the variables it defines in
__git_complete_config_variable_name to remove hardcoded config
variables, and add a test to verify the new function.  Use a single
'case' for all sections with second-level variables names, since the
code for each of them is now exactly the same.

Adjust the name of a test added in a previous commit to reflect that it
now tests the added function.

Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
---
 contrib/completion/git-completion.bash | 71 ++++++++------------------
 t/t9902-completion.sh                  |  2 +-
 2 files changed, 22 insertions(+), 51 deletions(-)

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 57a8da7ca1a..87678a5bb36 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2596,6 +2596,13 @@ __git_compute_config_vars ()
 	__git_config_vars="$(git help --config-for-completion)"
 }
 
+__git_config_vars_all=
+__git_compute_config_vars_all ()
+{
+	test -n "$__git_config_vars_all" ||
+	__git_config_vars_all="$(git --no-pager help --config)"
+}
+
 __git_compute_first_level_config_vars_for_section ()
 {
 	local section="$1"
@@ -2605,6 +2612,15 @@ __git_compute_first_level_config_vars_for_section ()
 	printf -v "__git_first_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars" | grep -E "^${section}\.[a-z]" | awk -F. '{print $2}')"
 }
 
+__git_compute_second_level_config_vars_for_section ()
+{
+	local section="$1"
+	__git_compute_config_vars_all
+	local this_section="__git_second_level_config_vars_for_section_${section}"
+	test -n "${!this_section}" ||
+	printf -v "__git_second_level_config_vars_for_section_${section}" %s "$(echo "$__git_config_vars_all" | grep -E "^${section}\.<" | awk -F. '{print $3}')"
+}
+
 __git_config_sections=
 __git_compute_config_sections ()
 {
@@ -2749,10 +2765,13 @@ __git_complete_config_variable_name ()
 	done
 
 	case "$cur_" in
-	branch.*.*)
+	branch.*.*|guitool.*.*|difftool.*.*|man.*.*|mergetool.*.*|remote.*.*|submodule.*.*|url.*.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_##*.}"
-		__gitcomp "remote pushRemote merge mergeOptions rebase" "$pfx" "$cur_" "$sfx"
+		local section="${pfx%.*.}"
+		__git_compute_second_level_config_vars_for_section "${section}"
+		local this_section="__git_second_level_config_vars_for_section_${section}"
+		__gitcomp "${!this_section}" "$pfx" "$cur_" "$sfx"
 		return
 		;;
 	branch.*)
@@ -2765,33 +2784,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	guitool.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "
-			argPrompt cmd confirm needsFile noConsole noRescan
-			prompt revPrompt revUnmerged title
-			" "$pfx" "$cur_" "$sfx"
-		return
-		;;
-	difftool.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "cmd path" "$pfx" "$cur_" "$sfx"
-		return
-		;;
-	man.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "cmd path" "$pfx" "$cur_" "$sfx"
-		return
-		;;
-	mergetool.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "cmd path trustExitCode" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	pager.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
@@ -2799,15 +2791,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl "$__git_all_commands" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	remote.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "
-			url proxy fetch push mirror skipDefaultUpdate
-			receivepack uploadpack tagOpt pushurl
-			" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	remote.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
@@ -2818,12 +2801,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	submodule.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "url update branch fetchRecurseSubmodules ignore active" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	submodule.*)
 		local pfx="${cur_%.*}."
 		cur_="${cur_#*.}"
@@ -2834,12 +2811,6 @@ __git_complete_config_variable_name ()
 		__gitcomp_nl_append "${!this_section}" "$pfx" "$cur_" "${sfx:- }"
 		return
 		;;
-	url.*.*)
-		local pfx="${cur_%.*}."
-		cur_="${cur_##*.}"
-		__gitcomp "insteadOf pushInsteadOf" "$pfx" "$cur_" "$sfx"
-		return
-		;;
 	*.*)
 		__git_compute_config_vars
 		__gitcomp "$__git_config_vars" "" "$cur_" "$sfx"
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 8600b9e0dd9..64031a9eff8 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -2601,7 +2601,7 @@ test_expect_success 'git config - variable name - submodule and __git_compute_fi
 	EOF
 '
 
-test_expect_success 'git config - variable name - submodule names' '
+test_expect_success 'git config - variable name - __git_compute_second_level_config_vars_for_section' '
 	test_completion "git config submodule.sub." <<-\EOF
 	submodule.sub.url Z
 	submodule.sub.update Z
-- 
gitgitgadget

Re: [PATCH v3 0/4] completion: remove hardcoded config variable names

[Patrick Steinhardt]

[-- Attachment #1: Type: text/plain, Size: 1295 bytes --]

On Sat, Feb 10, 2024 at 06:32:19PM +0000, Philippe Blain via GitGitGadget wrote:
> Changes since v2:
> 
>  * Moved the addition of the tests to 2/4, and tweaked 3/4 and 4/4 so they
>    simply adjust the test names
>  * Added a test for user-defined submodule names, as suggested by Patrick
>  * Added more details in the commit message of 3/4 around the use of global
>    variables as caches
>  * Slightly improved commit message wording and fixed typos
>  * Added 'local' where suggested
>  * Dropped 4/5 which modified 'git help', since it's not needed (thanks
>    Patrick!)
> 
> Changes since v1:
> 
>  * Corrected my email in PATCH 2/5 (sorry for the noise)
> 
> v1: This series removes hardcoded config variable names in the
> __git_complete_config_variable_name function, partly by adding a new mode to
> 'git help'. It also adds completion for 'submodule.*' config variables,
> which were previously missing.
> 
> I think it makes sense to do that in the same series since it's closely
> related, and splitting it would result in textual conflicts between both
> series if one does not build on top of the other, but I'm open to other
> suggestions.
> 
> Thanks,
> 
> Philippe.

I ain't got anything else to add to this patch series. Thanks!

Patrick

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v3 0/4] completion: remove hardcoded config variable names

[Junio C Hamano]

Patrick Steinhardt <ps@pks.im> writes:

> On Sat, Feb 10, 2024 at 06:32:19PM +0000, Philippe Blain via GitGitGadget wrote:
>> Changes since v2:
>> 
>>  * Moved the addition of the tests to 2/4, and tweaked 3/4 and 4/4 so they
>>    simply adjust the test names
>>  * Added a test for user-defined submodule names, as suggested by Patrick
>>  * Added more details in the commit message of 3/4 around the use of global
>>    variables as caches
>>  * Slightly improved commit message wording and fixed typos
>>  * Added 'local' where suggested
>>  * Dropped 4/5 which modified 'git help', since it's not needed (thanks
>>    Patrick!)
>> 
>> Changes since v1:
>> 
>>  * Corrected my email in PATCH 2/5 (sorry for the noise)
>> 
>> v1: This series removes hardcoded config variable names in the
>> __git_complete_config_variable_name function, partly by adding a new mode to
>> 'git help'. It also adds completion for 'submodule.*' config variables,
>> which were previously missing.
>> 
>> I think it makes sense to do that in the same series since it's closely
>> related, and splitting it would result in textual conflicts between both
>> series if one does not build on top of the other, but I'm open to other
>> suggestions.
>> 
>> Thanks,
>> 
>> Philippe.
>
> I ain't got anything else to add to this patch series. Thanks!

Thanks, both.  Let's mark it for 'next' so that it can be one of the
topics to graduate first after the current cycle.