'git mv' doesn't move submodule if it's in a subdirectory

'git mv' doesn't move submodule if it's in a subdirectory

[Albin Otterhäll]

I've a submodule located in a subdirectory
({git_rep}/home/{directory}/{submodule}), and I wanted to move the whole
directory up a level ({git_rep}/{directory}/{submodule}). But when I
used 'git mv {directory} ../' the '.gitmodule' file didn't get modified.

Best regards,
Albin Otterhäll

Re: 'git mv' doesn't move submodule if it's in a subdirectory

[Stefan Beller]

On Fri, Apr 15, 2016 at 1:14 AM, Albin Otterhäll <gmane@otterhall.com> wrote:
> I've a submodule located in a subdirectory
> ({git_rep}/home/{directory}/{submodule}), and I wanted to move the whole
> directory up a level ({git_rep}/{directory}/{submodule}). But when I
> used 'git mv {directory} ../' the '.gitmodule' file didn't get modified.
>
> Best regards,
> Albin Otterhäll

Thanks for the bug report!
Which version of Git do you use? (Did you try different versions?)

Re: 'git mv' doesn't move submodule if it's in a subdirectory

[Stefan Beller]

On Fri, Apr 15, 2016 at 10:18 AM, Stefan Beller <sbeller@google.com> wrote:
> On Fri, Apr 15, 2016 at 1:14 AM, Albin Otterhäll <gmane@otterhall.com> wrote:
>> I've a submodule located in a subdirectory
>> ({git_rep}/home/{directory}/{submodule}), and I wanted to move the whole
>> directory up a level ({git_rep}/{directory}/{submodule}). But when I
>> used 'git mv {directory} ../' the '.gitmodule' file didn't get modified.
>>
>> Best regards,
>> Albin Otterhäll
>
> Thanks for the bug report!
> Which version of Git do you use? (Did you try different versions?)

I think I can reproduce the problem. A regression test (which currently fails)
could look like
diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh
index 4008fae..3b96a9a 100755
--- a/t/t7001-mv.sh
+++ b/t/t7001-mv.sh
@@ -292,6 +292,9 @@ test_expect_success 'setup submodule' '
        echo content >file &&
        git add file &&
        git commit -m "added sub and file" &&
+       mkdir -p deep/directory/hierachy &&
+       git submodule add ./. deep/directory/hierachy/sub &&
+       git commit -m "added another submodule" &&
        git branch submodule
 '

@@ -475,4 +478,14 @@ test_expect_success 'mv -k does not accidentally
destroy submodules' '
        git checkout .
 '

+test_expect_failure 'moving a submodule in nested directories' '
+       (
+               cd deep &&
+               git mv directory ../ &&
+               git status
+               # currently git status exits with 128
+               # fatal: Not a git repository:
directory/hierachy/sub/../../../../.git/modules/deep/directory/hierachy/sub
+       )
+'
+
 test_done

Re: 'git mv' doesn't move submodule if it's in a subdirectory

[Junio C Hamano]

Stefan Beller <sbeller@google.com> writes:

> I think I can reproduce the problem. A regression test (which currently fails)
> could look like

Thanks.  I however do not think this is a regression.

Changes around 0656781f (mv: update the path entry in .gitmodules
for moved submodules, 2013-08-06) did introduce "git mv dir1 dir2"
when 'dir1' is a submodule, but I do not think it went beyond that.
I do not see any effort to treat a submodule that is discovered by
scanning a directory that was given from the command line,
i.e. prepare_move_submodule() is not called for them, and the
entries in the submodule_gitfile[] array that correspond to them are
explicitly set to NULL in the loop.


> diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh
> index 4008fae..3b96a9a 100755
> --- a/t/t7001-mv.sh
> +++ b/t/t7001-mv.sh
> @@ -292,6 +292,9 @@ test_expect_success 'setup submodule' '
>         echo content >file &&
>         git add file &&
>         git commit -m "added sub and file" &&
> +       mkdir -p deep/directory/hierachy &&
> +       git submodule add ./. deep/directory/hierachy/sub &&
> +       git commit -m "added another submodule" &&
>         git branch submodule
>  '
>
> @@ -475,4 +478,14 @@ test_expect_success 'mv -k does not accidentally
> destroy submodules' '
>         git checkout .
>  '
>
> +test_expect_failure 'moving a submodule in nested directories' '
> +       (
> +               cd deep &&
> +               git mv directory ../ &&
> +               git status
> +               # currently git status exits with 128
> +               # fatal: Not a git repository:
> directory/hierachy/sub/../../../../.git/modules/deep/directory/hierachy/sub
> +       )
> +'
> +
>  test_done

Re: 'git mv' doesn't move submodule if it's in a subdirectory

[Stefan Beller]

On Fri, Apr 15, 2016 at 11:21 AM, Junio C Hamano <gitster@pobox.com> wrote:
> Stefan Beller <sbeller@google.com> writes:
>
>> I think I can reproduce the problem. A regression test (which currently fails)
>> could look like
>
> Thanks.  I however do not think this is a regression.
>
> Changes around 0656781f (mv: update the path entry in .gitmodules
> for moved submodules, 2013-08-06) did introduce "git mv dir1 dir2"
> when 'dir1' is a submodule, but I do not think it went beyond that.
> I do not see any effort to treat a submodule that is discovered by
> scanning a directory that was given from the command line,
> i.e. prepare_move_submodule() is not called for them, and the
> entries in the submodule_gitfile[] array that correspond to them are
> explicitly set to NULL in the loop.

Also I just realize this is not exactly the same bug as reported.
Albin complains about the .gitmodules file not being adjusted, whereas
the test case I wrote breaks commands in your superproject, i.e. `git status`
or `git diff` just dies.

(Manually inspecting the .gitmodules file turns out it is not adjusted as well.)

>
>
>> diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh
>> index 4008fae..3b96a9a 100755
>> --- a/t/t7001-mv.sh
>> +++ b/t/t7001-mv.sh
>> @@ -292,6 +292,9 @@ test_expect_success 'setup submodule' '
>>         echo content >file &&
>>         git add file &&
>>         git commit -m "added sub and file" &&
>> +       mkdir -p deep/directory/hierachy &&
>> +       git submodule add ./. deep/directory/hierachy/sub &&
>> +       git commit -m "added another submodule" &&
>>         git branch submodule
>>  '
>>
>> @@ -475,4 +478,14 @@ test_expect_success 'mv -k does not accidentally
>> destroy submodules' '
>>         git checkout .
>>  '
>>
>> +test_expect_failure 'moving a submodule in nested directories' '
>> +       (
>> +               cd deep &&
>> +               git mv directory ../ &&
>> +               git status
>> +               # currently git status exits with 128
>> +               # fatal: Not a git repository:
>> directory/hierachy/sub/../../../../.git/modules/deep/directory/hierachy/sub
>> +       )
>> +'
>> +
>>  test_done

[PATCH] mv: allow moving nested submodules

[Stefan Beller]

When directories are moved using `git mv` all files in the directory
have been just moved, but no further action was taken on them. This
was done by assigning the mode = WORKING_DIRECTORY to the files
inside a moved directory.

submodules however need to update their link to the git directory as
well as updates to the .gitmodules file. By removing the condition of
`mode != INDEX` (the remaining modes are BOTH and WORKING_DIRECTORY) for
the required submodule actions, we perform these for submodules in a
moved directory.

Signed-off-by: Stefan Beller <sbeller@google.com>
---

Albin,
I think this would fix your problem.

Developed on origin/master (it may apply on older versions, though I did not test)

Thanks,
Stefan

 builtin/mv.c  |  7 +++++--
 t/t7001-mv.sh | 16 ++++++++++++++++
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/builtin/mv.c b/builtin/mv.c
index aeae855..65fff11 100644
--- a/builtin/mv.c
+++ b/builtin/mv.c
@@ -252,9 +252,12 @@ int cmd_mv(int argc, const char **argv, const char *prefix)
 		int pos;
 		if (show_only || verbose)
 			printf(_("Renaming %s to %s\n"), src, dst);
-		if (!show_only && mode != INDEX) {
-			if (rename(src, dst) < 0 && !ignore_errors)
+		if (!show_only) {
+			if (mode != INDEX &&
+			    rename(src, dst) < 0 &&
+			    !ignore_errors)
 				die_errno(_("renaming '%s' failed"), src);
+
 			if (submodule_gitfile[i]) {
 				if (submodule_gitfile[i] != SUBMODULE_WITH_GITDIR)
 					connect_work_tree_and_git_dir(dst, submodule_gitfile[i]);
diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh
index 4008fae..4a2570e 100755
--- a/t/t7001-mv.sh
+++ b/t/t7001-mv.sh
@@ -292,6 +292,9 @@ test_expect_success 'setup submodule' '
 	echo content >file &&
 	git add file &&
 	git commit -m "added sub and file" &&
+	mkdir -p deep/directory/hierachy &&
+	git submodule add ./. deep/directory/hierachy/sub &&
+	git commit -m "added another submodule" &&
 	git branch submodule
 '
 
@@ -475,4 +478,17 @@ test_expect_success 'mv -k does not accidentally destroy submodules' '
 	git checkout .
 '
 
+test_expect_success 'moving a submodule in nested directories' '
+	(
+		cd deep &&
+		git mv directory ../ &&
+		# git status would fail if the update of linking git dir to
+		# work dir of the submodule failed.
+		git status &&
+		git config -f ../.gitmodules submodule.deep/directory/hierachy/sub.path >../actual &&
+		echo "directory/hierachy/sub" >../expect
+	) &&
+	test_cmp actual expect
+'
+
 test_done
-- 
2.8.1.211.g630c034

Re: 'git mv' doesn't move submodule if it's in a subdirectory

[Albin Otterhäll]

On 2016-04-15 19:18, Stefan Beller wrote:
> On Fri, Apr 15, 2016 at 1:14 AM, Albin Otterhäll <gmane@otterhall.com> wrote:
>> I've a submodule located in a subdirectory
>> ({git_rep}/home/{directory}/{submodule}), and I wanted to move the whole
>> directory up a level ({git_rep}/{directory}/{submodule}). But when I
>> used 'git mv {directory} ../' the '.gitmodule' file didn't get modified.
>>
>> Best regards,
>> Albin Otterhäll
> 
> Thanks for the bug report!
> Which version of Git do you use? (Did you try different versions?)
> 

I'm using 2.8.0 (on an Arch system). Haven't tested on any other version.