From: Caleb White <cdwhite3@pm.me>
To: phillip.wood@dunelm.org.uk, git@vger.kernel.org
Cc: Taylor Blau <me@ttaylorr.com>, Junio C Hamano <gitster@pobox.com>,
Eric Sunshine <sunshine@sunshineco.com>
Subject: Re: [PATCH v2 2/5] worktree: add `write_worktree_linking_files` function
Date: Wed, 30 Oct 2024 05:30:53 +0000 [thread overview]
Message-ID: <D58W71B3R4HV.WWTA6V6UJ9IP@pm.me> (raw)
In-Reply-To: <4a316a5f-9360-4f24-843f-bcbb5b3378c4@gmail.com>
On Tue Oct 29, 2024 at 9:52 AM CDT, Phillip Wood wrote:
> On 28/10/2024 19:09, Caleb White wrote:
>> This also teachs `git worktree repair` to fix the linking files if
>> there is an absolute/relative paths but the links are correct. E.g.,
>> `git worktree repair` can be used to convert a valid worktree between
>> absolute and relative paths.
>
> This might be better as a separate step so that reviewers can
> concentrate on the correctness of write_werktree_linking_files() when
> reviewing this patch.
I'm planning on splitting this patch into separate patches for `add`,
`move`, and `repair` commands. This can likely be done in the same
patch as the `repair` command as it shouldn't be too difficult to
follow at that point.
Best,
Caleb
>> Signed-off-by: Caleb White <cdwhite3@pm.me>
>> ---
>> builtin/worktree.c | 11 +----
>> worktree.c | 118 +++++++++++++++++++++++++++--------------------------
>> worktree.h | 12 ++++++
>> 3 files changed, 74 insertions(+), 67 deletions(-)
>>
>> diff --git a/builtin/worktree.c b/builtin/worktree.c
>> index c1130be5890c905c0b648782a834eb8dfcd79ba5..bb06830d6fe82aa97833c6e87f034115dfaa23bd 100644
>> --- a/builtin/worktree.c
>> +++ b/builtin/worktree.c
>> @@ -417,8 +417,7 @@ static int add_worktree(const char *path, const char *refname,
>> const struct add_opts *opts)
>> {
>> struct strbuf sb_git = STRBUF_INIT, sb_repo = STRBUF_INIT;
>> - struct strbuf sb = STRBUF_INIT, sb_tmp = STRBUF_INIT;
>> - struct strbuf sb_path_realpath = STRBUF_INIT, sb_repo_realpath = STRBUF_INIT;
>> + struct strbuf sb = STRBUF_INIT;
>> const char *name;
>> struct strvec child_env = STRVEC_INIT;
>> unsigned int counter = 0;
>> @@ -494,10 +493,7 @@ static int add_worktree(const char *path, const char *refname,
>>
>> strbuf_reset(&sb);
>> strbuf_addf(&sb, "%s/gitdir", sb_repo.buf);
>> - strbuf_realpath(&sb_path_realpath, path, 1);
>> - strbuf_realpath(&sb_repo_realpath, sb_repo.buf, 1);
>> - write_file(sb.buf, "%s/.git", relative_path(sb_path_realpath.buf, sb_repo_realpath.buf, &sb_tmp));
>> - write_file(sb_git.buf, "gitdir: %s", relative_path(sb_repo_realpath.buf, sb_path_realpath.buf, &sb_tmp));
>> + write_worktree_linking_files(sb_git, sb);
>> strbuf_reset(&sb);
>> strbuf_addf(&sb, "%s/commondir", sb_repo.buf);
>> write_file(sb.buf, "../..");
>> @@ -581,12 +577,9 @@ static int add_worktree(const char *path, const char *refname,
>>
>> strvec_clear(&child_env);
>> strbuf_release(&sb);
>> - strbuf_release(&sb_tmp);
>> strbuf_release(&symref);
>> strbuf_release(&sb_repo);
>> - strbuf_release(&sb_repo_realpath);
>> strbuf_release(&sb_git);
>> - strbuf_release(&sb_path_realpath);
>> strbuf_release(&sb_name);
>> free_worktree(wt);
>> return ret;
>> diff --git a/worktree.c b/worktree.c
>> index de5c5e53a5f2a758ddf470b5d6a9ad6c66247181..f4cee73d7a1edecafdff30b6d5e2d9dd1365b93e 100644
>> --- a/worktree.c
>> +++ b/worktree.c
>> @@ -381,29 +381,24 @@ int validate_worktree(const struct worktree *wt, struct strbuf *errmsg,
>> void update_worktree_location(struct worktree *wt, const char *path_)
>> {
>> struct strbuf path = STRBUF_INIT;
>> - struct strbuf repo = STRBUF_INIT;
>> - struct strbuf file = STRBUF_INIT;
>> - struct strbuf tmp = STRBUF_INIT;
>> + struct strbuf dotgit = STRBUF_INIT;
>> + struct strbuf gitdir = STRBUF_INIT;
>>
>> if (is_main_worktree(wt))
>> BUG("can't relocate main worktree");
>>
>> - strbuf_realpath(&repo, git_common_path("worktrees/%s", wt->id), 1);
>> + strbuf_realpath(&gitdir, git_common_path("worktrees/%s/gitdir", wt->id), 1);
>> strbuf_realpath(&path, path_, 1);
>> + strbuf_addf(&dotgit, "%s/.git", path.buf);
>> if (fspathcmp(wt->path, path.buf)) {
>> - strbuf_addf(&file, "%s/gitdir", repo.buf);
>> - write_file(file.buf, "%s/.git", relative_path(path.buf, repo.buf, &tmp));
>> - strbuf_reset(&file);
>> - strbuf_addf(&file, "%s/.git", path.buf);
>> - write_file(file.buf, "gitdir: %s", relative_path(repo.buf, path.buf, &tmp));
>> + write_worktree_linking_files(dotgit, gitdir);
>>
>> free(wt->path);
>> wt->path = strbuf_detach(&path, NULL);
>> }
>> strbuf_release(&path);
>> - strbuf_release(&repo);
>> - strbuf_release(&file);
>> - strbuf_release(&tmp);
>> + strbuf_release(&dotgit);
>> + strbuf_release(&gitdir);
>> }
>>
>> int is_worktree_being_rebased(const struct worktree *wt,
>> @@ -582,9 +577,9 @@ static void repair_gitfile(struct worktree *wt,
>> worktree_repair_fn fn, void *cb_data)
>> {
>> struct strbuf dotgit = STRBUF_INIT;
>> + struct strbuf gitdir = STRBUF_INIT;
>> struct strbuf repo = STRBUF_INIT;
>> struct strbuf backlink = STRBUF_INIT;
>> - struct strbuf tmp = STRBUF_INIT;
>> char *dotgit_contents = NULL;
>> const char *repair = NULL;
>> int err;
>> @@ -600,6 +595,7 @@ static void repair_gitfile(struct worktree *wt,
>>
>> strbuf_realpath(&repo, git_common_path("worktrees/%s", wt->id), 1);
>> strbuf_addf(&dotgit, "%s/.git", wt->path);
>> + strbuf_addf(&gitdir, "%s/gitdir", repo.buf);
>> dotgit_contents = xstrdup_or_null(read_gitfile_gently(dotgit.buf, &err));
>>
>> if (dotgit_contents) {
>> @@ -617,18 +613,20 @@ static void repair_gitfile(struct worktree *wt,
>> repair = _(".git file broken");
>> else if (fspathcmp(backlink.buf, repo.buf))
>> repair = _(".git file incorrect");
>> + else if (use_relative_paths == is_absolute_path(dotgit_contents))
>> + repair = _(".git file absolute/relative path mismatch");
>>
>> if (repair) {
>> fn(0, wt->path, repair, cb_data);
>> - write_file(dotgit.buf, "gitdir: %s", relative_path(repo.buf, wt->path, &tmp));
>> + write_worktree_linking_files(dotgit, gitdir);
>> }
>>
>> done:
>> free(dotgit_contents);
>> strbuf_release(&repo);
>> strbuf_release(&dotgit);
>> + strbuf_release(&gitdir);
>> strbuf_release(&backlink);
>> - strbuf_release(&tmp);
>> }
>>
>> static void repair_noop(int iserr UNUSED,
>> @@ -653,45 +651,30 @@ void repair_worktrees(worktree_repair_fn fn, void *cb_data)
>>
>> void repair_worktree_after_gitdir_move(struct worktree *wt, const char *old_path)
>> {
>> - struct strbuf path = STRBUF_INIT;
>> - struct strbuf repo = STRBUF_INIT;
>> struct strbuf gitdir = STRBUF_INIT;
>> struct strbuf dotgit = STRBUF_INIT;
>> - struct strbuf olddotgit = STRBUF_INIT;
>> - struct strbuf tmp = STRBUF_INIT;
>>
>> if (is_main_worktree(wt))
>> goto done;
>>
>> - strbuf_realpath(&repo, git_common_path("worktrees/%s", wt->id), 1);
>> - strbuf_addf(&gitdir, "%s/gitdir", repo.buf);
>> + strbuf_realpath(&gitdir, git_common_path("worktrees/%s/gitdir", wt->id), 1);
>>
>> - if (strbuf_read_file(&olddotgit, gitdir.buf, 0) < 0)
>> + if (strbuf_read_file(&dotgit, gitdir.buf, 0) < 0)
>> goto done;
>>
>> - strbuf_rtrim(&olddotgit);
>> - if (is_absolute_path(olddotgit.buf)) {
>> - strbuf_addbuf(&dotgit, &olddotgit);
>> - } else {
>> - strbuf_addf(&dotgit, "%s/worktrees/%s/%s", old_path, wt->id, olddotgit.buf);
>> + strbuf_rtrim(&dotgit);
>> + if (!is_absolute_path(dotgit.buf)) {
>> + strbuf_insertf(&dotgit, 0, "%s/worktrees/%s/", old_path, wt->id);
>> strbuf_realpath_forgiving(&dotgit, dotgit.buf, 0);
>> }
>>
>> if (!file_exists(dotgit.buf))
>> goto done;
>>
>> - strbuf_addbuf(&path, &dotgit);
>> - strbuf_strip_suffix(&path, "/.git");
>> -
>> - write_file(dotgit.buf, "gitdir: %s", relative_path(repo.buf, path.buf, &tmp));
>> - write_file(gitdir.buf, "%s", relative_path(dotgit.buf, repo.buf, &tmp));
>> + write_worktree_linking_files(dotgit, gitdir);
>> done:
>> - strbuf_release(&path);
>> - strbuf_release(&repo);
>> strbuf_release(&gitdir);
>> strbuf_release(&dotgit);
>> - strbuf_release(&olddotgit);
>> - strbuf_release(&tmp);
>> }
>>
>> void repair_worktrees_after_gitdir_move(const char *old_path)
>> @@ -766,13 +749,10 @@ void repair_worktree_at_path(const char *path,
>> worktree_repair_fn fn, void *cb_data)
>> {
>> struct strbuf dotgit = STRBUF_INIT;
>> - struct strbuf realdotgit = STRBUF_INIT;
>> struct strbuf backlink = STRBUF_INIT;
>> struct strbuf inferred_backlink = STRBUF_INIT;
>> struct strbuf gitdir = STRBUF_INIT;
>> struct strbuf olddotgit = STRBUF_INIT;
>> - struct strbuf realolddotgit = STRBUF_INIT;
>> - struct strbuf tmp = STRBUF_INIT;
>> char *dotgit_contents = NULL;
>> const char *repair = NULL;
>> int err;
>> @@ -784,25 +764,25 @@ void repair_worktree_at_path(const char *path,
>> goto done;
>>
>> strbuf_addf(&dotgit, "%s/.git", path);
>> - if (!strbuf_realpath(&realdotgit, dotgit.buf, 0)) {
>> + if (!strbuf_realpath(&dotgit, dotgit.buf, 0)) {
>> fn(1, path, _("not a valid path"), cb_data);
>> goto done;
>> }
>>
>> - infer_backlink(realdotgit.buf, &inferred_backlink);
>> + infer_backlink(dotgit.buf, &inferred_backlink);
>> strbuf_realpath_forgiving(&inferred_backlink, inferred_backlink.buf, 0);
>> - dotgit_contents = xstrdup_or_null(read_gitfile_gently(realdotgit.buf, &err));
>> + dotgit_contents = xstrdup_or_null(read_gitfile_gently(dotgit.buf, &err));
>> if (dotgit_contents) {
>> if (is_absolute_path(dotgit_contents)) {
>> strbuf_addstr(&backlink, dotgit_contents);
>> } else {
>> - strbuf_addbuf(&backlink, &realdotgit);
>> + strbuf_addbuf(&backlink, &dotgit);
>> strbuf_strip_suffix(&backlink, ".git");
>> strbuf_addstr(&backlink, dotgit_contents);
>> strbuf_realpath_forgiving(&backlink, backlink.buf, 0);
>> }
>> } else if (err == READ_GITFILE_ERR_NOT_A_FILE) {
>> - fn(1, realdotgit.buf, _("unable to locate repository; .git is not a file"), cb_data);
>> + fn(1, dotgit.buf, _("unable to locate repository; .git is not a file"), cb_data);
>> goto done;
>> } else if (err == READ_GITFILE_ERR_NOT_A_REPO) {
>> if (inferred_backlink.len) {
>> @@ -815,11 +795,11 @@ void repair_worktree_at_path(const char *path,
>> */
>> strbuf_swap(&backlink, &inferred_backlink);
>> } else {
>> - fn(1, realdotgit.buf, _("unable to locate repository; .git file does not reference a repository"), cb_data);
>> + fn(1, dotgit.buf, _("unable to locate repository; .git file does not reference a repository"), cb_data);
>> goto done;
>> }
>> } else {
>> - fn(1, realdotgit.buf, _("unable to locate repository; .git file broken"), cb_data);
>> + fn(1, dotgit.buf, _("unable to locate repository; .git file broken"), cb_data);
>> goto done;
>> }
>>
>> @@ -841,39 +821,35 @@ void repair_worktree_at_path(const char *path,
>> * in the "copy" repository. In this case, point the "copy" worktree's
>> * .git file at the "copy" repository.
>> */
>> - if (inferred_backlink.len && fspathcmp(backlink.buf, inferred_backlink.buf)) {
>> + if (inferred_backlink.len && fspathcmp(backlink.buf, inferred_backlink.buf))
>> strbuf_swap(&backlink, &inferred_backlink);
>> - }
>>
>> strbuf_addf(&gitdir, "%s/gitdir", backlink.buf);
>> if (strbuf_read_file(&olddotgit, gitdir.buf, 0) < 0)
>> repair = _("gitdir unreadable");
>> + else if (use_relative_paths == is_absolute_path(olddotgit.buf))
>> + repair = _("gitdir absolute/relative path mismatch");
>> else {
>> strbuf_rtrim(&olddotgit);
>> - if (is_absolute_path(olddotgit.buf)) {
>> - strbuf_addbuf(&realolddotgit, &olddotgit);
>> - } else {
>> - strbuf_addf(&realolddotgit, "%s/%s", backlink.buf, olddotgit.buf);
>> - strbuf_realpath_forgiving(&realolddotgit, realolddotgit.buf, 0);
>> + if (!is_absolute_path(olddotgit.buf)) {
>> + strbuf_insertf(&olddotgit, 0, "%s/", backlink.buf);
>> + strbuf_realpath_forgiving(&olddotgit, olddotgit.buf, 0);
>> }
>> - if (fspathcmp(realolddotgit.buf, realdotgit.buf))
>> + if (fspathcmp(olddotgit.buf, dotgit.buf))
>> repair = _("gitdir incorrect");
>> }
>>
>> if (repair) {
>> fn(0, gitdir.buf, repair, cb_data);
>> - write_file(gitdir.buf, "%s", relative_path(realdotgit.buf, backlink.buf, &tmp));
>> + write_worktree_linking_files(dotgit, gitdir);
>> }
>> done:
>> free(dotgit_contents);
>> strbuf_release(&olddotgit);
>> - strbuf_release(&realolddotgit);
>> strbuf_release(&backlink);
>> strbuf_release(&inferred_backlink);
>> strbuf_release(&gitdir);
>> - strbuf_release(&realdotgit);
>> strbuf_release(&dotgit);
>> - strbuf_release(&tmp);
>> }
>>
>> int should_prune_worktree(const char *id, struct strbuf *reason, char **wtpath, timestamp_t expire)
>> @@ -1034,3 +1010,29 @@ int init_worktree_config(struct repository *r)
>> free(main_worktree_file);
>> return res;
>> }
>> +
>> +void write_worktree_linking_files(struct strbuf dotgit, struct strbuf gitdir)
>> +{
>> + struct strbuf path = STRBUF_INIT;
>> + struct strbuf repo = STRBUF_INIT;
>> + struct strbuf tmp = STRBUF_INIT;
>> +
>> + strbuf_addbuf(&path, &dotgit);
>> + strbuf_strip_suffix(&path, "/.git");
>> + strbuf_realpath(&path, path.buf, 1);
>> + strbuf_addbuf(&repo, &gitdir);
>> + strbuf_strip_suffix(&repo, "/gitdir");
>> + strbuf_realpath(&repo, repo.buf, 1);
>> +
>> + if (use_relative_paths) {
>> + write_file(gitdir.buf, "%s/.git", relative_path(path.buf, repo.buf, &tmp));
>> + write_file(dotgit.buf, "gitdir: %s", relative_path(repo.buf, path.buf, &tmp));
>> + } else {
>> + write_file(gitdir.buf, "%s/.git", path.buf);
>> + write_file(dotgit.buf, "gitdir: %s", repo.buf);
>> + }
>> +
>> + strbuf_release(&path);
>> + strbuf_release(&repo);
>> + strbuf_release(&tmp);
>> +}
>> diff --git a/worktree.h b/worktree.h
>> index 37e65d508ed23d3e7a29850bb938285072a3aaa6..5929089891c97318a8f5329f7938264c717050d5 100644
>> --- a/worktree.h
>> +++ b/worktree.h
>> @@ -217,4 +217,16 @@ void strbuf_worktree_ref(const struct worktree *wt,
>> */
>> int init_worktree_config(struct repository *r);
>>
>> +/**
>> + * Write the .git file and gitdir file that links the worktree to the repository.
>> + *
>> + * The `dotgit` parameter is the path to the worktree's .git file, and `gitdir`
>> + * is the path to the repository's `gitdir` file.
>> + *
>> + * Example
>> + * dotgit: "/path/to/foo/.git"
>> + * gitdir: "/path/to/repo/worktrees/foo/gitdir"
>> + */
>> +void write_worktree_linking_files(struct strbuf dotgit, struct strbuf gitdir);
>> +
>> #endif
>>
next prev parent reply other threads:[~2024-10-30 5:30 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-28 19:09 [PATCH v2 0/5] Allow relative worktree linking to be configured by the user Caleb White
2024-10-28 19:09 ` [PATCH v2 1/5] worktree: add CLI/config options for relative path linking Caleb White
2024-10-29 14:52 ` Phillip Wood
2024-10-30 5:27 ` Caleb White
2024-10-30 20:16 ` Taylor Blau
2024-10-30 20:21 ` Caleb White
2024-10-30 20:30 ` phillip.wood123
2024-10-30 20:36 ` Caleb White
2024-10-29 18:42 ` Taylor Blau
2024-10-30 5:07 ` Caleb White
2024-10-28 19:09 ` [PATCH v2 2/5] worktree: add `write_worktree_linking_files` function Caleb White
2024-10-29 14:52 ` Phillip Wood
2024-10-29 22:55 ` Taylor Blau
2024-10-30 5:38 ` Caleb White
2024-10-30 5:30 ` Caleb White [this message]
2024-10-28 19:09 ` [PATCH v2 3/5] worktree: add tests for worktrees with relative paths Caleb White
2024-10-29 14:52 ` Phillip Wood
2024-10-29 14:58 ` Caleb White
2024-10-29 15:43 ` phillip.wood123
2024-10-30 5:10 ` Caleb White
2024-10-29 23:00 ` Taylor Blau
2024-10-30 4:16 ` Caleb White
2024-10-28 19:10 ` [PATCH v2 4/5] setup: correctly reinitialize repository version Caleb White
2024-10-28 19:10 ` [PATCH v2 5/5] worktree: add `relativeWorktrees` extension Caleb White
2024-10-29 14:55 ` [PATCH v2 0/5] Allow relative worktree linking to be configured by the user Phillip Wood
2024-10-30 5:13 ` Caleb White
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D58W71B3R4HV.WWTA6V6UJ9IP@pm.me \
--to=cdwhite3@pm.me \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=me@ttaylorr.com \
--cc=phillip.wood@dunelm.org.uk \
--cc=sunshine@sunshineco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).