From: Taylor Blau <me@ttaylorr.com>
To: Junio C Hamano <gitster@pobox.com>
Cc: git@vger.kernel.org, Jeff King <peff@peff.net>,
Patrick Steinhardt <ps@pks.im>
Subject: Re: [PATCH 05/24] midx: implement `DISP` chunk
Date: Fri, 8 Dec 2023 21:30:07 -0500 [thread overview]
Message-ID: <ZXPRL5yCTQKr0k7e@nand.local> (raw)
In-Reply-To: <xmqqlea4nofm.fsf@gitster.g>
On Fri, Dec 08, 2023 at 05:40:29PM -0800, Junio C Hamano wrote:
> Taylor Blau <me@ttaylorr.com> writes:
>
> > Hopefully you're satisfied with the way things are split up and
> > organized currently, but if you have suggestions on other ways I could
> > slice or dice this, please let me know.
>
> I did wonder how expensive to recompute and validate the "distinct"
> information (in other words, is it too expensive for the consumers
> of an existing midx file to see which packs are distinct on demand
> before they stream contents out of the underlying packs?), as the
> way the packs are marked as distinct looked rather error prone (you
> can very easily list packfiles with overlaps with "+" prefix and the
> DISK chunk writer does not even notice that you lied to it). As long
> as "git fsck" catches when two packs that are marked as distinct share
> an object, that is OK, but the arrangement did look rather brittle
> to me.
It's likely too expensive to do on the reading side for every
pack-objects operation or MIDX load. But we do check this property when
we write the MIDX, see these lines from midx.c::get_sorted_entries():
for (cur_object = 0; cur_object < fanout.nr; cur_object++) {
struct pack_midx_entry *ours = &fanout.entries[cur_object];
if (cur_object) {
struct pack_midx_entry *prev = &fanout.entries[cur_object - 1];
if (oideq(&prev->oid, &ours->oid)) {
if (prev->disjoint && ours->disjoint)
die(_("duplicate object '%s' among disjoint packs '%s', '%s'"),
oid_to_hex(&prev->oid),
info[prev->pack_int_id].pack_name,
info[ours->pack_int_id].pack_name);
continue;
}
}
This series doesn't yet have a corresponding step in the fsck builtin,
but I will investigate adding one.
I'm happy to include it in a subsequent round here, but I worry that
this series is already on the verge of being too complex as-is, so it
may be nice as a follow-up, too.
Thanks,
Taylor
next prev parent reply other threads:[~2023-12-09 2:30 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-28 19:07 [PATCH 00/24] pack-objects: multi-pack verbatim reuse Taylor Blau
2023-11-28 19:07 ` [PATCH 01/24] pack-objects: free packing_data in more places Taylor Blau
2023-11-30 10:18 ` Patrick Steinhardt
2023-11-30 19:08 ` Taylor Blau
2023-11-28 19:07 ` [PATCH 02/24] pack-bitmap-write: deep-clear the `bb_commit` slab Taylor Blau
2023-11-30 10:18 ` Patrick Steinhardt
2023-11-30 19:11 ` Taylor Blau
2023-12-12 7:04 ` Jeff King
2023-12-12 16:48 ` Taylor Blau
2023-11-28 19:08 ` [PATCH 03/24] pack-bitmap: plug leak in find_objects() Taylor Blau
2023-12-12 7:04 ` Jeff King
2023-11-28 19:08 ` [PATCH 04/24] midx: factor out `fill_pack_info()` Taylor Blau
2023-11-30 10:18 ` Patrick Steinhardt
2023-11-30 19:19 ` Taylor Blau
2023-11-28 19:08 ` [PATCH 05/24] midx: implement `DISP` chunk Taylor Blau
2023-11-30 10:18 ` Patrick Steinhardt
2023-11-30 19:27 ` Taylor Blau
2023-12-03 13:15 ` Junio C Hamano
2023-12-05 19:26 ` Taylor Blau
2023-12-09 1:40 ` Junio C Hamano
2023-12-09 2:30 ` Taylor Blau [this message]
2023-12-12 8:03 ` Jeff King
2023-12-13 18:28 ` Taylor Blau
2023-12-13 19:20 ` Junio C Hamano
2023-11-28 19:08 ` [PATCH 06/24] midx: implement `midx_locate_pack()` Taylor Blau
2023-11-28 19:08 ` [PATCH 07/24] midx: implement `--retain-disjoint` mode Taylor Blau
2023-11-30 10:18 ` Patrick Steinhardt
2023-11-30 19:29 ` Taylor Blau
2023-12-01 8:02 ` Patrick Steinhardt
2023-11-28 19:08 ` [PATCH 08/24] pack-objects: implement `--ignore-disjoint` mode Taylor Blau
2023-11-30 10:18 ` Patrick Steinhardt
2023-11-30 19:32 ` Taylor Blau
2023-12-01 8:17 ` Patrick Steinhardt
2023-12-01 19:58 ` Taylor Blau
2023-11-28 19:08 ` [PATCH 09/24] repack: implement `--extend-disjoint` mode Taylor Blau
2023-12-07 13:13 ` Patrick Steinhardt
2023-12-07 20:28 ` Taylor Blau
2023-12-08 8:19 ` Patrick Steinhardt
2023-12-08 22:48 ` Taylor Blau
2023-12-11 8:18 ` Patrick Steinhardt
2023-12-11 19:59 ` Taylor Blau
2023-11-28 19:08 ` [PATCH 10/24] pack-bitmap: pass `bitmapped_pack` struct to pack-reuse functions Taylor Blau
2023-12-07 13:13 ` Patrick Steinhardt
2023-12-07 20:34 ` Taylor Blau
2023-12-08 8:19 ` Patrick Steinhardt
2023-11-28 19:08 ` [PATCH 11/24] pack-bitmap: simplify `reuse_partial_packfile_from_bitmap()` signature Taylor Blau
2023-12-07 13:13 ` Patrick Steinhardt
2023-12-07 14:36 ` Taylor Blau
2023-11-28 19:08 ` [PATCH 12/24] pack-bitmap: return multiple packs via `reuse_partial_packfile_from_bitmap()` Taylor Blau
2023-11-28 19:08 ` [PATCH 13/24] pack-objects: parameterize pack-reuse routines over a single pack Taylor Blau
2023-11-28 19:08 ` [PATCH 14/24] pack-objects: keep track of `pack_start` for each reuse pack Taylor Blau
2023-12-07 13:13 ` Patrick Steinhardt
2023-12-07 20:43 ` Taylor Blau
2023-11-28 19:08 ` [PATCH 15/24] pack-objects: pass `bitmapped_pack`'s to pack-reuse functions Taylor Blau
2023-11-28 19:08 ` [PATCH 16/24] pack-objects: prepare `write_reused_pack()` for multi-pack reuse Taylor Blau
2023-12-07 13:13 ` Patrick Steinhardt
2023-12-07 20:47 ` Taylor Blau
2023-11-28 19:08 ` [PATCH 17/24] pack-objects: prepare `write_reused_pack_verbatim()` " Taylor Blau
2023-11-28 19:08 ` [PATCH 18/24] pack-objects: include number of packs reused in output Taylor Blau
2023-11-28 19:08 ` [PATCH 19/24] pack-bitmap: prepare to mark objects from multiple packs for reuse Taylor Blau
2023-11-28 19:08 ` [PATCH 20/24] pack-objects: add tracing for various packfile metrics Taylor Blau
2023-11-28 19:08 ` [PATCH 21/24] t/test-lib-functions.sh: implement `test_trace2_data` helper Taylor Blau
2023-11-28 19:08 ` [PATCH 22/24] pack-objects: allow setting `pack.allowPackReuse` to "single" Taylor Blau
2023-11-28 19:08 ` [PATCH 23/24] pack-bitmap: reuse objects from all disjoint packs Taylor Blau
2023-11-28 19:08 ` [PATCH 24/24] t/perf: add performance tests for multi-pack reuse Taylor Blau
2023-11-30 10:18 ` [PATCH 00/24] pack-objects: multi-pack verbatim reuse Patrick Steinhardt
2023-11-30 19:39 ` Taylor Blau
2023-12-01 8:31 ` Patrick Steinhardt
2023-12-01 20:02 ` Taylor Blau
2023-12-04 8:49 ` Patrick Steinhardt
2023-12-12 8:12 ` Jeff King
2023-12-15 15:37 ` Taylor Blau
2023-12-21 11:13 ` Jeff King
2024-01-04 22:22 ` Taylor Blau
2023-12-14 22:23 ` [PATCH v2 00/26] " Taylor Blau
2023-12-14 22:23 ` [PATCH v2 01/26] pack-objects: free packing_data in more places Taylor Blau
2023-12-14 22:23 ` [PATCH v2 02/26] pack-bitmap-write: deep-clear the `bb_commit` slab Taylor Blau
2023-12-14 22:23 ` [PATCH v2 03/26] pack-bitmap: plug leak in find_objects() Taylor Blau
2023-12-14 22:23 ` [PATCH v2 04/26] midx: factor out `fill_pack_info()` Taylor Blau
2023-12-14 22:23 ` [PATCH v2 05/26] midx: implement `BTMP` chunk Taylor Blau
2023-12-14 22:23 ` [PATCH v2 06/26] midx: implement `midx_locate_pack()` Taylor Blau
2023-12-14 22:23 ` [PATCH v2 07/26] pack-bitmap: pass `bitmapped_pack` struct to pack-reuse functions Taylor Blau
2023-12-14 22:23 ` [PATCH v2 08/26] ewah: implement `bitmap_is_empty()` Taylor Blau
2023-12-14 22:24 ` [PATCH v2 09/26] pack-bitmap: simplify `reuse_partial_packfile_from_bitmap()` signature Taylor Blau
2023-12-14 22:24 ` [PATCH v2 10/26] pack-bitmap: return multiple packs via `reuse_partial_packfile_from_bitmap()` Taylor Blau
2023-12-14 22:24 ` [PATCH v2 11/26] pack-objects: parameterize pack-reuse routines over a single pack Taylor Blau
2023-12-14 22:24 ` [PATCH v2 12/26] pack-objects: keep track of `pack_start` for each reuse pack Taylor Blau
2023-12-14 22:24 ` [PATCH v2 13/26] pack-objects: pass `bitmapped_pack`'s to pack-reuse functions Taylor Blau
2023-12-14 22:24 ` [PATCH v2 14/26] pack-objects: prepare `write_reused_pack()` for multi-pack reuse Taylor Blau
2023-12-14 22:24 ` [PATCH v2 15/26] pack-objects: prepare `write_reused_pack_verbatim()` " Taylor Blau
2023-12-14 22:24 ` [PATCH v2 16/26] pack-objects: include number of packs reused in output Taylor Blau
2023-12-14 22:24 ` [PATCH v2 17/26] git-compat-util.h: implement checked size_t to uint32_t conversion Taylor Blau
2023-12-14 22:24 ` [PATCH v2 18/26] midx: implement `midx_preferred_pack()` Taylor Blau
2023-12-14 22:24 ` [PATCH v2 19/26] pack-revindex: factor out `midx_key_to_pack_pos()` helper Taylor Blau
2023-12-14 22:24 ` [PATCH v2 20/26] pack-revindex: implement `midx_pair_to_pack_pos()` Taylor Blau
2023-12-14 22:24 ` [PATCH v2 21/26] pack-bitmap: prepare to mark objects from multiple packs for reuse Taylor Blau
2023-12-14 22:24 ` [PATCH v2 22/26] pack-objects: add tracing for various packfile metrics Taylor Blau
2023-12-14 22:24 ` [PATCH v2 23/26] t/test-lib-functions.sh: implement `test_trace2_data` helper Taylor Blau
2023-12-14 22:24 ` [PATCH v2 24/26] pack-objects: allow setting `pack.allowPackReuse` to "single" Taylor Blau
2023-12-14 22:24 ` [PATCH v2 25/26] pack-bitmap: enable reuse from all bitmapped packs Taylor Blau
2023-12-14 22:24 ` [PATCH v2 26/26] t/perf: add performance tests for multi-pack reuse Taylor Blau
2023-12-15 0:06 ` [PATCH v2 00/26] pack-objects: multi-pack verbatim reuse Junio C Hamano
2023-12-15 0:38 ` Taylor Blau
2023-12-15 0:40 ` Junio C Hamano
2023-12-15 1:25 ` Taylor Blau
2023-12-21 10:51 ` Jeff King
2024-01-04 22:24 ` Taylor Blau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZXPRL5yCTQKr0k7e@nand.local \
--to=me@ttaylorr.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=peff@peff.net \
--cc=ps@pks.im \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).