* [PATCH 1/4] Allow e-mails to be sent with the Unix sendmail tool
2008-07-13 11:40 [PATCH 0/4] Proposed patches Catalin Marinas
@ 2008-07-13 11:40 ` Catalin Marinas
2008-07-15 12:22 ` Mark Brown
2008-07-13 11:40 ` [PATCH 2/4] Implement a new patch identification scheme and id command Catalin Marinas
` (4 subsequent siblings)
5 siblings, 1 reply; 17+ messages in thread
From: Catalin Marinas @ 2008-07-13 11:40 UTC (permalink / raw)
To: Karl Hasselström, git
If the stgit.smtpserver configuration option does not have a host:port
format, it is assumed to be an external tool. For example, to use
sendmail just set this variable to "/usr/sbin/sendmail -t -i" (see the
examples/gitconfig file).
Signed-off-by: Catalin Marinas <catalin.marinas@gmail.com>
---
examples/gitconfig | 1 +
stgit/commands/mail.py | 46 ++++++++++++++++++++++++++++++++++------------
2 files changed, 35 insertions(+), 12 deletions(-)
diff --git a/examples/gitconfig b/examples/gitconfig
index c16f786..28d94af 100644
--- a/examples/gitconfig
+++ b/examples/gitconfig
@@ -19,6 +19,7 @@
#autoresolved = no
# SMTP server for sending patches
+ #smtpserver = /usr/sbin/sendmail -t -i
#smtpserver = localhost:25
# Set to 'yes' to use SMTP over TLS
diff --git a/stgit/commands/mail.py b/stgit/commands/mail.py
index b4d4e18..c87d67e 100644
--- a/stgit/commands/mail.py
+++ b/stgit/commands/mail.py
@@ -24,6 +24,7 @@ from stgit.utils import *
from stgit.out import *
from stgit import stack, git, version, templates
from stgit.config import config
+from stgit.run import Run
help = 'send a patch or series of patches by e-mail'
@@ -31,13 +32,15 @@ usage = r"""%prog [options] [<patch1>] [<patch2>] [<patch3>..<patch4>]
Send a patch or a range of patches by e-mail using the SMTP server
specified by the 'stgit.smtpserver' configuration option, or the
-'--smtp-server' command line option. The From address and the e-mail
-format are generated from the template file passed as argument to
-'--template' (defaulting to '.git/patchmail.tmpl' or
-'~/.stgit/templates/patchmail.tmpl' or
+'--smtp-server' command line option. This option can also be an
+absolute path to 'sendmail' followed by command line arguments.
+
+The From address and the e-mail format are generated from the template
+file passed as argument to '--template' (defaulting to
+'.git/patchmail.tmpl' or '~/.stgit/templates/patchmail.tmpl' or
'/usr/share/stgit/templates/patchmail.tmpl'). A patch can be sent as
-attachment using the --attach option in which case the 'mailattch.tmpl'
-template will be used instead of 'patchmail.tmpl'.
+attachment using the --attach option in which case the
+'mailattch.tmpl' template will be used instead of 'patchmail.tmpl'.
The To/Cc/Bcc addresses can either be added to the template file or
passed via the corresponding command line options. They can be e-mail
@@ -133,8 +136,9 @@ options = [make_option('-a', '--all',
help = 'sleep for SECONDS between e-mails sending'),
make_option('--refid',
help = 'use REFID as the reference id'),
- make_option('--smtp-server', metavar = 'HOST[:PORT]',
- help = 'SMTP server to use for sending mail'),
+ make_option('--smtp-server',
+ metavar = 'HOST[:PORT] or "/path/to/sendmail -t -i"',
+ help = 'SMTP server or command to use for sending mail'),
make_option('-u', '--smtp-user', metavar = 'USER',
help = 'username for SMTP authentication'),
make_option('-p', '--smtp-password', metavar = 'PASSWORD',
@@ -184,8 +188,14 @@ def __parse_addresses(msg):
return (from_addr_list[0], to_addr_list)
-def __send_message(smtpserver, from_addr, to_addr_list, msg, sleep,
- smtpuser, smtppassword, use_tls):
+def __send_message_sendmail(sendmail, msg):
+ """Send the message using the sendmail command.
+ """
+ cmd = sendmail.split()
+ Run(*cmd).raw_input(msg).discard_output()
+
+def __send_message_smtp(smtpserver, from_addr, to_addr_list, msg,
+ smtpuser, smtppassword, use_tls):
"""Send the message using the given SMTP server
"""
try:
@@ -207,13 +217,25 @@ def __send_message(smtpserver, from_addr, to_addr_list, msg, sleep,
result = s.sendmail(from_addr, to_addr_list, msg)
if len(result):
print "mail server refused delivery for the following recipients: %s" % result
- # give recipients a chance of receiving patches in the correct order
- time.sleep(sleep)
except Exception, err:
raise CmdException, str(err)
s.quit()
+def __send_message(smtpserver, from_addr, to_addr_list, msg,
+ sleep, smtpuser, smtppassword, use_tls):
+ """Message sending dispatcher.
+ """
+ if smtpserver.startswith('/'):
+ # Use the sendmail tool
+ __send_message_sendmail(smtpserver, msg)
+ else:
+ # Use the SMTP server (we have host and port information)
+ __send_message_smtp(smtpserver, from_addr, to_addr_list, msg,
+ smtpuser, smtppassword, use_tls)
+ # give recipients a chance of receiving patches in the correct order
+ time.sleep(sleep)
+
def __build_address_headers(msg, options, extra_cc = []):
"""Build the address headers and check existing headers in the
template.
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH 1/4] Allow e-mails to be sent with the Unix sendmail tool
2008-07-13 11:40 ` [PATCH 1/4] Allow e-mails to be sent with the Unix sendmail tool Catalin Marinas
@ 2008-07-15 12:22 ` Mark Brown
2008-07-15 12:34 ` Karl Hasselström
0 siblings, 1 reply; 17+ messages in thread
From: Mark Brown @ 2008-07-15 12:22 UTC (permalink / raw)
To: Catalin Marinas; +Cc: Karl Hasselstr??m, git
On Sun, Jul 13, 2008 at 12:40:26PM +0100, Catalin Marinas wrote:
> If the stgit.smtpserver configuration option does not have a host:port
> format, it is assumed to be an external tool. For example, to use
> sendmail just set this variable to "/usr/sbin/sendmail -t -i" (see the
> examples/gitconfig file).
I'd really expect to be able to just specify the hostname alone if using
the standard SMTP port. Perhaps checking for a / in the server might be
less surprising?
--
"You grabbed my hand and we fell into it, like a daydream - or a fever."
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/4] Allow e-mails to be sent with the Unix sendmail tool
2008-07-15 12:22 ` Mark Brown
@ 2008-07-15 12:34 ` Karl Hasselström
2008-07-15 21:47 ` Catalin Marinas
0 siblings, 1 reply; 17+ messages in thread
From: Karl Hasselström @ 2008-07-15 12:34 UTC (permalink / raw)
To: Mark Brown; +Cc: Catalin Marinas, git
On 2008-07-15 13:22:20 +0100, Mark Brown wrote:
> On Sun, Jul 13, 2008 at 12:40:26PM +0100, Catalin Marinas wrote:
>
> > If the stgit.smtpserver configuration option does not have a
> > host:port format, it is assumed to be an external tool. For
> > example, to use sendmail just set this variable to
> > "/usr/sbin/sendmail -t -i" (see the examples/gitconfig file).
>
> I'd really expect to be able to just specify the hostname alone if
> using the standard SMTP port. Perhaps checking for a / in the server
> might be less surprising?
This is actually what the code does, and what the documentation claims
it should do. It's just the commit message that's confused. Catalin?
--
Karl Hasselström, kha@treskal.com
www.treskal.com/kalle
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 1/4] Allow e-mails to be sent with the Unix sendmail tool
2008-07-15 12:34 ` Karl Hasselström
@ 2008-07-15 21:47 ` Catalin Marinas
0 siblings, 0 replies; 17+ messages in thread
From: Catalin Marinas @ 2008-07-15 21:47 UTC (permalink / raw)
To: Karl Hasselström; +Cc: Mark Brown, git
2008/7/15 Karl Hasselström <kha@treskal.com>:
> On 2008-07-15 13:22:20 +0100, Mark Brown wrote:
>
>> On Sun, Jul 13, 2008 at 12:40:26PM +0100, Catalin Marinas wrote:
>>
>> > If the stgit.smtpserver configuration option does not have a
>> > host:port format, it is assumed to be an external tool. For
>> > example, to use sendmail just set this variable to
>> > "/usr/sbin/sendmail -t -i" (see the examples/gitconfig file).
>>
>> I'd really expect to be able to just specify the hostname alone if
>> using the standard SMTP port. Perhaps checking for a / in the server
>> might be less surprising?
>
> This is actually what the code does, and what the documentation claims
> it should do. It's just the commit message that's confused. Catalin?
Yes, indeed, but too many things to keep in sync :-).
--
Catalin
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 2/4] Implement a new patch identification scheme and id command
2008-07-13 11:40 [PATCH 0/4] Proposed patches Catalin Marinas
2008-07-13 11:40 ` [PATCH 1/4] Allow e-mails to be sent with the Unix sendmail tool Catalin Marinas
@ 2008-07-13 11:40 ` Catalin Marinas
2008-07-14 6:58 ` Karl Hasselström
2008-07-13 11:40 ` [PATCH 3/4] Convert git_id() to the new id format Catalin Marinas
` (3 subsequent siblings)
5 siblings, 1 reply; 17+ messages in thread
From: Catalin Marinas @ 2008-07-13 11:40 UTC (permalink / raw)
To: Karl Hasselström, git
The new scheme allows '[<branch>:]<patch>' and '[<branch>:]{base}'
(the latter showing the base of a stack). The former format allows
symbols like ^ and ^{...}.
Signed-off-by: Catalin Marinas <catalin.marinas@gmail.com>
---
stgit/commands/common.py | 33 +++++++++++++++++++++++++++++++++
stgit/commands/id.py | 28 ++++++++++++----------------
stgit/lib/git.py | 4 ++--
t/t0001-subdir-branches.sh | 24 ++++++++++--------------
t/t1200-push-modified.sh | 2 +-
t/t1201-pull-trailing.sh | 2 +-
t/t2200-rebase.sh | 2 +-
7 files changed, 60 insertions(+), 35 deletions(-)
diff --git a/stgit/commands/common.py b/stgit/commands/common.py
index 029ec65..0133f1a 100644
--- a/stgit/commands/common.py
+++ b/stgit/commands/common.py
@@ -28,6 +28,7 @@ from stgit.run import *
from stgit import stack, git, basedir
from stgit.config import config, file_extensions
from stgit.lib import stack as libstack
+from stgit.lib import git as libgit
# Command exception class
class CmdException(StgException):
@@ -116,6 +117,38 @@ def git_id(crt_series, rev):
raise CmdException, 'Unknown patch or revision: %s' % rev
+def git_commit(name, repository, branch = None):
+ """Return the a Commit object if 'name' is a patch name or Git commit.
+ The patch names allowed are in the form '<branch>:<patch>' and can
+ be followed by standard symbols used by git-rev-parse. If <patch>
+ is '{base}', it represents the bottom of the stack.
+ """
+ # Try a [branch:]patch name first
+ try:
+ branch, patch = name.split(':', 1)
+ except ValueError:
+ patch = name
+ if not branch:
+ branch = repository.current_branch_name
+
+ # The stack base
+ if patch.startswith('{base}'):
+ base_id = repository.get_stack(branch).base.sha1
+ return repository.rev_parse(base_id + patch[6:])
+
+ # Other combination of branch and patch
+ try:
+ return repository.rev_parse('patches/%s/%s' % (branch, patch),
+ discard_stderr = True)
+ except libgit.RepositoryException:
+ pass
+
+ # Try a Git commit
+ try:
+ return repository.rev_parse(name, discard_stderr = True)
+ except libgit.RepositoryException:
+ raise CmdException('%s: Unknown patch or revision name' % name)
+
def check_local_changes():
if git.local_changes():
raise CmdException('local changes in the tree. Use "refresh" or'
diff --git a/stgit/commands/id.py b/stgit/commands/id.py
index 94b0229..3819acc 100644
--- a/stgit/commands/id.py
+++ b/stgit/commands/id.py
@@ -15,28 +15,24 @@ along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
"""
-import sys, os
from optparse import OptionParser, make_option
-from stgit.commands.common import *
-from stgit.utils import *
-from stgit.out import *
-from stgit import stack, git
-
+from stgit.out import out
+from stgit.commands import common
+from stgit.lib import stack
help = 'print the GIT hash value of a StGIT reference'
usage = """%prog [options] [id]
-Print the hash value of a GIT id (defaulting to HEAD). In addition to
-the standard GIT id's like heads and tags, this command also accepts
-'base[@<branch>]' and '[<patch>[@<branch>]][//[bottom | top]]'. If no
-'top' or 'bottom' are passed and <patch> is a valid patch name, 'top'
-will be used by default."""
-
-directory = DirectoryHasRepository()
-options = [make_option('-b', '--branch',
- help = 'use BRANCH instead of the default one')]
+Print the SHA1 value of a Git id (defaulting to HEAD). In addition to
+the standard Git id's like heads and tags, this command also accepts
+'[<branch>:]<patch>' and '[<branch>:]{base}' showing the id of a patch
+or the base of the stack. If no branch is specified, it defaults to the
+current one. The bottom of a patch is accessible with the
+'[<branch>:]<patch>^' format."""
+directory = common.DirectoryHasRepositoryLib()
+options = []
def func(parser, options, args):
"""Show the applied patches
@@ -48,4 +44,4 @@ def func(parser, options, args):
else:
parser.error('incorrect number of arguments')
- out.stdout(git_id(crt_series, id_str))
+ out.stdout(common.git_commit(id_str, directory.repository).sha1)
diff --git a/stgit/lib/git.py b/stgit/lib/git.py
index 6ccdfa7..4746da3 100644
--- a/stgit/lib/git.py
+++ b/stgit/lib/git.py
@@ -422,11 +422,11 @@ class Repository(RunWithEnv):
refs = property(lambda self: self.__refs)
def cat_object(self, sha1):
return self.run(['git', 'cat-file', '-p', sha1]).raw_output()
- def rev_parse(self, rev):
+ def rev_parse(self, rev, discard_stderr = False):
try:
return self.get_commit(self.run(
['git', 'rev-parse', '%s^{commit}' % rev]
- ).output_one_line())
+ ).discard_stderr(discard_stderr).output_one_line())
except run.RunException:
raise RepositoryException('%s: No such revision' % rev)
def get_tree(self, sha1):
diff --git a/t/t0001-subdir-branches.sh b/t/t0001-subdir-branches.sh
index 69c11a3..3f7962a 100755
--- a/t/t0001-subdir-branches.sh
+++ b/t/t0001-subdir-branches.sh
@@ -18,25 +18,21 @@ test_expect_success 'Create a patch' \
stg new foo -m "Add foo.txt" &&
stg refresh'
-test_expect_success 'Old and new id with non-slashy branch' \
- 'stg id foo &&
- stg id foo// &&
- stg id foo/ &&
- stg id foo//top &&
- stg id foo/top &&
- stg id foo@master &&
- stg id foo@master//top &&
- stg id foo@master/top'
+test_expect_success 'Try id with non-slashy branch' \
+ 'stg id &&
+ stg id foo &&
+ stg id foo^ &&
+ stg id master:foo &&
+ stg id master:foo^'
test_expect_success 'Clone branch to slashier name' \
'stg branch --clone x/y/z'
-test_expect_success 'Try new form of id with slashy branch' \
+test_expect_success 'Try new id with slashy branch' \
'stg id foo &&
- stg id foo// &&
- stg id foo//top &&
- stg id foo@x/y/z &&
- stg id foo@x/y/z//top'
+ stg id foo^ &&
+ stg id x/y/z:foo &&
+ stg id x/y/z:foo^'
test_expect_success 'Try old id with slashy branch' '
command_error stg id foo/ &&
diff --git a/t/t1200-push-modified.sh b/t/t1200-push-modified.sh
index 6ebd0a1..2edc760 100755
--- a/t/t1200-push-modified.sh
+++ b/t/t1200-push-modified.sh
@@ -36,7 +36,7 @@ test_expect_success \
(
cd foo &&
GIT_DIR=../bar/.git git-format-patch --stdout \
- $(cd ../bar && stg id base@master)..HEAD | git-am -3 -k
+ $(cd ../bar && stg id master:{base})..HEAD | git-am -3 -k
)
'
diff --git a/t/t1201-pull-trailing.sh b/t/t1201-pull-trailing.sh
index 9d70fe0..8a74873 100755
--- a/t/t1201-pull-trailing.sh
+++ b/t/t1201-pull-trailing.sh
@@ -30,7 +30,7 @@ test_expect_success \
'Port those patches to orig tree' \
'(cd foo &&
GIT_DIR=../bar/.git git-format-patch --stdout \
- $(cd ../bar && stg id base@master)..HEAD |
+ $(cd ../bar && stg id master:{base})..HEAD |
git-am -3 -k
)
'
diff --git a/t/t2200-rebase.sh b/t/t2200-rebase.sh
index a6f43bc..256eaaa 100755
--- a/t/t2200-rebase.sh
+++ b/t/t2200-rebase.sh
@@ -27,7 +27,7 @@ test_expect_success \
'Rebase to previous commit' \
'
stg rebase master~1 &&
- test `stg id base@stack` = `git rev-parse master~1` &&
+ test `stg id stack:{base}` = `git rev-parse master~1` &&
test `stg applied | wc -l` = 1
'
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH 2/4] Implement a new patch identification scheme and id command
2008-07-13 11:40 ` [PATCH 2/4] Implement a new patch identification scheme and id command Catalin Marinas
@ 2008-07-14 6:58 ` Karl Hasselström
0 siblings, 0 replies; 17+ messages in thread
From: Karl Hasselström @ 2008-07-14 6:58 UTC (permalink / raw)
To: Catalin Marinas; +Cc: git
On 2008-07-13 12:40:35 +0100, Catalin Marinas wrote:
> The new scheme allows '[<branch>:]<patch>' and '[<branch>:]{base}'
> (the latter showing the base of a stack). The former format allows
> symbols like ^ and ^{...}.
You changed it, so s/The former format allows/You may append/ or
something.
> + # The stack base
> + if patch.startswith('{base}'):
> + base_id = repository.get_stack(branch).base.sha1
> + return repository.rev_parse(base_id + patch[6:])
We have a strip_prefix() function precisely so that we can avoid
error-prone and not-so-easy-to-read constants like that "6" ...
Hmm. I see that I feel strongly enough about this that I've defined no
less than two identical functions in utils.py to do this job:
strip_prefix() and strip_leading(). :-)
--
Karl Hasselström, kha@treskal.com
www.treskal.com/kalle
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 3/4] Convert git_id() to the new id format
2008-07-13 11:40 [PATCH 0/4] Proposed patches Catalin Marinas
2008-07-13 11:40 ` [PATCH 1/4] Allow e-mails to be sent with the Unix sendmail tool Catalin Marinas
2008-07-13 11:40 ` [PATCH 2/4] Implement a new patch identification scheme and id command Catalin Marinas
@ 2008-07-13 11:40 ` Catalin Marinas
2008-07-14 7:07 ` Karl Hasselström
2008-07-25 0:47 ` [StGit PATCH] Fix some remaining old-style stg id calls Karl Hasselström
2008-07-13 11:40 ` [PATCH 4/4] Remove the applied/unapplied commands Catalin Marinas
` (2 subsequent siblings)
5 siblings, 2 replies; 17+ messages in thread
From: Catalin Marinas @ 2008-07-13 11:40 UTC (permalink / raw)
To: Karl Hasselström, git
The patch rewrites git_id() to use the new id format and coverts the
commands using this function. The git_id() will be removed once all the
commands are converted to the new infrastructure where git_commit() will
be used instead.
Signed-off-by: Catalin Marinas <catalin.marinas@gmail.com>
---
stgit/commands/common.py | 98 +++++++--------------------------------------
stgit/commands/diff.py | 23 +++++------
stgit/commands/files.py | 10 ++---
stgit/commands/mail.py | 8 ++--
stgit/commands/pick.py | 10 ++---
stgit/commands/refresh.py | 4 +-
stgit/commands/series.py | 4 +-
t/t2000-sync.sh | 2 -
8 files changed, 43 insertions(+), 116 deletions(-)
diff --git a/stgit/commands/common.py b/stgit/commands/common.py
index 0133f1a..0413aac 100644
--- a/stgit/commands/common.py
+++ b/stgit/commands/common.py
@@ -35,101 +35,35 @@ class CmdException(StgException):
pass
# Utility functions
-class RevParseException(StgException):
- """Revision spec parse error."""
- pass
-
def parse_rev(rev):
- """Parse a revision specification into its
- patchname@branchname//patch_id parts. If no branch name has a slash
- in it, also accept / instead of //."""
- if '/' in ''.join(git.get_heads()):
- # We have branch names with / in them.
- branch_chars = r'[^@]'
- patch_id_mark = r'//'
- else:
- # No / in branch names.
- branch_chars = r'[^@/]'
- patch_id_mark = r'(/|//)'
- patch_re = r'(?P<patch>[^@/]+)'
- branch_re = r'@(?P<branch>%s+)' % branch_chars
- patch_id_re = r'%s(?P<patch_id>[a-z.]*)' % patch_id_mark
-
- # Try //patch_id.
- m = re.match(r'^%s$' % patch_id_re, rev)
- if m:
- return None, None, m.group('patch_id')
-
- # Try path[@branch]//patch_id.
- m = re.match(r'^%s(%s)?%s$' % (patch_re, branch_re, patch_id_re), rev)
- if m:
- return m.group('patch'), m.group('branch'), m.group('patch_id')
-
- # Try patch[@branch].
- m = re.match(r'^%s(%s)?$' % (patch_re, branch_re), rev)
- if m:
- return m.group('patch'), m.group('branch'), None
-
- # No, we can't parse that.
- raise RevParseException
-
-def git_id(crt_series, rev):
- """Return the GIT id
+ """Parse a revision specification into its branch:patch parts.
"""
- if not rev:
- return None
-
- # try a GIT revision first
try:
- return git.rev_parse(rev + '^{commit}')
- except git.GitException:
- pass
+ branch, patch = rev.split(':', 1)
+ except ValueError:
+ branch = None
+ patch = rev
- # try an StGIT patch name
- try:
- patch, branch, patch_id = parse_rev(rev)
- if branch == None:
- series = crt_series
- else:
- series = stack.Series(branch)
- if patch == None:
- patch = series.get_current()
- if not patch:
- raise CmdException, 'No patches applied'
- if patch in series.get_applied() or patch in series.get_unapplied() or \
- patch in series.get_hidden():
- if patch_id in ['top', '', None]:
- return series.get_patch(patch).get_top()
- elif patch_id == 'bottom':
- return series.get_patch(patch).get_bottom()
- elif patch_id == 'top.old':
- return series.get_patch(patch).get_old_top()
- elif patch_id == 'bottom.old':
- return series.get_patch(patch).get_old_bottom()
- elif patch_id == 'log':
- return series.get_patch(patch).get_log()
- if patch == 'base' and patch_id == None:
- return series.get_base()
- except RevParseException:
- pass
- except stack.StackException:
- pass
+ return (branch, patch)
- raise CmdException, 'Unknown patch or revision: %s' % rev
+def git_id(crt_series, rev):
+ """Return the GIT id
+ """
+ # TODO: remove this function once all the occurrences were converted
+ # to git_commit()
+ repository = libstack.Repository.default()
+ return git_commit(rev, repository, crt_series.get_name()).sha1
-def git_commit(name, repository, branch = None):
+def git_commit(name, repository, branch_name = None):
"""Return the a Commit object if 'name' is a patch name or Git commit.
The patch names allowed are in the form '<branch>:<patch>' and can
be followed by standard symbols used by git-rev-parse. If <patch>
is '{base}', it represents the bottom of the stack.
"""
# Try a [branch:]patch name first
- try:
- branch, patch = name.split(':', 1)
- except ValueError:
- patch = name
+ branch, patch = parse_rev(name)
if not branch:
- branch = repository.current_branch_name
+ branch = branch_name or repository.current_branch_name
# The stack base
if patch.startswith('{base}'):
diff --git a/stgit/commands/diff.py b/stgit/commands/diff.py
index fd6be34..c57f720 100644
--- a/stgit/commands/diff.py
+++ b/stgit/commands/diff.py
@@ -30,17 +30,14 @@ help = 'show the tree diff'
usage = """%prog [options] [<files or dirs>]
Show the diff (default) or diffstat between the current working copy
-or a tree-ish object and another tree-ish object. File names can also
-be given to restrict the diff output. The tree-ish object can be a
-standard git commit, tag or tree. In addition to these, the command
-also supports 'base', representing the bottom of the current stack,
-and '[patch][//[bottom | top]]' for the patch boundaries (defaulting to
-the current one):
+or a tree-ish object and another tree-ish object (defaulting to HEAD).
+File names can also be given to restrict the diff output. The
+tree-ish object can be an StGIT patch, a standard git commit, tag or
+tree. In addition to these, the command also supports '{base}',
+representing the bottom of the current stack.
-rev = '([patch][//[bottom | top]]) | <tree-ish> | base'
-
-If neither bottom nor top are given but a '//' is present, the command
-shows the specified patch (defaulting to the current one)."""
+rev = '[branch:](<patch>|{base}) | <tree-ish>'
+"""
directory = DirectoryHasRepository()
options = [make_option('-r', '--range',
@@ -67,8 +64,8 @@ def func(parser, options, args):
rev = strip_suffix('/', rev)
if rev.endswith('/'):
rev = strip_suffix('/', rev)
- rev1 = rev + '//bottom'
- rev2 = rev + '//top'
+ rev1 = rev + 'HEAD^'
+ rev2 = rev + 'HEAD'
else:
rev1 = rev_list[0]
rev2 = None
@@ -82,7 +79,7 @@ def func(parser, options, args):
rev2 = None
diff_str = git.diff(args, git_id(crt_series, rev1),
- git_id(crt_series, rev2),
+ rev2 and git_id(crt_series, rev2),
diff_flags = options.diff_flags)
if options.stat:
out.stdout_raw(git.diffstat(diff_str) + '\n')
diff --git a/stgit/commands/files.py b/stgit/commands/files.py
index b43b12f..d240872 100644
--- a/stgit/commands/files.py
+++ b/stgit/commands/files.py
@@ -26,7 +26,7 @@ from stgit import stack, git
help = 'show the files modified by a patch (or the current patch)'
-usage = """%prog [options] [<patch>]
+usage = """%prog [options] [[<branch>:]<patch>]
List the files modified by the given patch (defaulting to the current
one). Passing the '--stat' option shows the diff statistics for the
@@ -38,8 +38,6 @@ directory = DirectoryHasRepository()
options = [make_option('-s', '--stat',
help = 'show the diff stat',
action = 'store_true'),
- make_option('-b', '--branch',
- help = 'use BRANCH instead of the default one'),
make_option('--bare',
help = 'bare file names (useful for scripting)',
action = 'store_true')
@@ -50,14 +48,14 @@ def func(parser, options, args):
"""Show the files modified by a patch (or the current patch)
"""
if len(args) == 0:
- patch = ''
+ patch = 'HEAD'
elif len(args) == 1:
patch = args[0]
else:
parser.error('incorrect number of arguments')
- rev1 = git_id(crt_series, '%s//bottom' % patch)
- rev2 = git_id(crt_series, '%s//top' % patch)
+ rev1 = git_id(crt_series, '%s^' % patch)
+ rev2 = git_id(crt_series, '%s' % patch)
if options.stat:
out.stdout_raw(git.diffstat(git.diff(rev1 = rev1, rev2 = rev2)) + '\n')
diff --git a/stgit/commands/mail.py b/stgit/commands/mail.py
index c87d67e..e04dc2f 100644
--- a/stgit/commands/mail.py
+++ b/stgit/commands/mail.py
@@ -383,8 +383,8 @@ def __build_cover(tmpl, patches, msg_id, options):
'shortlog': stack.shortlog(crt_series.get_patch(p)
for p in patches),
'diffstat': git.diffstat(git.diff(
- rev1 = git_id(crt_series, '%s//bottom' % patches[0]),
- rev2 = git_id(crt_series, '%s//top' % patches[-1])))}
+ rev1 = git_id(crt_series, '%s^' % patches[0]),
+ rev2 = git_id(crt_series, '%s' % patches[-1])))}
try:
msg_string = tmpl % tmpl_dict
@@ -460,8 +460,8 @@ def __build_message(tmpl, patch, patch_nr, total_nr, msg_id, ref_id, options):
else:
number_str = ''
- diff = git.diff(rev1 = git_id(crt_series, '%s//bottom' % patch),
- rev2 = git_id(crt_series, '%s//top' % patch),
+ diff = git.diff(rev1 = git_id(crt_series, '%s^' % patch),
+ rev2 = git_id(crt_series, '%s' % patch),
diff_flags = options.diff_flags)
tmpl_dict = {'patch': patch,
'sender': sender,
diff --git a/stgit/commands/pick.py b/stgit/commands/pick.py
index 1f7c84b..2a670e8 100644
--- a/stgit/commands/pick.py
+++ b/stgit/commands/pick.py
@@ -87,8 +87,8 @@ def __pick_commit(commit_id, patchname, options):
out.done()
elif options.update:
- rev1 = git_id(crt_series, '//bottom')
- rev2 = git_id(crt_series, '//top')
+ rev1 = git_id(crt_series, 'HEAD^')
+ rev2 = git_id(crt_series, 'HEAD')
files = git.barefiles(rev1, rev2).split('\n')
out.start('Updating with commit %s' % commit_id)
@@ -115,10 +115,8 @@ def __pick_commit(commit_id, patchname, options):
patchname = newpatch.get_name()
# find a patchlog to fork from
- (refpatchname, refbranchname, refpatchid) = parse_rev(patchname)
- if refpatchname and not refpatchid and \
- (not refpatchid or refpatchid == 'top'):
- # FIXME: should also support picking //top.old
+ refbranchname, refpatchname = parse_rev(patchname)
+ if refpatchname:
if refbranchname:
# assume the refseries is OK, since we already resolved
# commit_str to a git_id
diff --git a/stgit/commands/refresh.py b/stgit/commands/refresh.py
index 4695c62..73e4ee0 100644
--- a/stgit/commands/refresh.py
+++ b/stgit/commands/refresh.py
@@ -103,8 +103,8 @@ def func(parser, options, args):
between = applied[:applied.index(patch):-1]
pop_patches(crt_series, between, keep = True)
elif options.update:
- rev1 = git_id(crt_series, '//bottom')
- rev2 = git_id(crt_series, '//top')
+ rev1 = git_id(crt_series, 'HEAD^')
+ rev2 = git_id(crt_series, 'HEAD')
patch_files = git.barefiles(rev1, rev2).split('\n')
files = [f for f in files if f in patch_files]
if not files:
diff --git a/stgit/commands/series.py b/stgit/commands/series.py
index 04183bd..c11c74f 100644
--- a/stgit/commands/series.py
+++ b/stgit/commands/series.py
@@ -88,7 +88,7 @@ def __print_patch(stack, patch, branch_str, prefix, empty_prefix, length, option
elif options.empty and stack.patches.get(patch).is_empty():
prefix = empty_prefix
- patch_str = patch + branch_str
+ patch_str = branch_str + patch
if options.description or options.author:
patch_str = patch_str.ljust(length)
@@ -164,7 +164,7 @@ def func(parser, options, args):
return
if options.showbranch:
- branch_str = '@' + stack.name
+ branch_str = stack.name + ':'
else:
branch_str = ''
diff --git a/t/t2000-sync.sh b/t/t2000-sync.sh
index 9852eb8..f4e8b07 100755
--- a/t/t2000-sync.sh
+++ b/t/t2000-sync.sh
@@ -37,7 +37,7 @@ test_expect_success \
test_expect_success \
'Create a branch with empty patches' \
'
- stg branch -c foo base &&
+ stg branch -c foo {base} &&
stg new p1 -m p1 &&
stg new p2 -m p2 &&
stg new p3 -m p3 &&
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH 3/4] Convert git_id() to the new id format
2008-07-13 11:40 ` [PATCH 3/4] Convert git_id() to the new id format Catalin Marinas
@ 2008-07-14 7:07 ` Karl Hasselström
2008-08-21 21:39 ` Catalin Marinas
2008-07-25 0:47 ` [StGit PATCH] Fix some remaining old-style stg id calls Karl Hasselström
1 sibling, 1 reply; 17+ messages in thread
From: Karl Hasselström @ 2008-07-14 7:07 UTC (permalink / raw)
To: Catalin Marinas; +Cc: git
On 2008-07-13 12:40:48 +0100, Catalin Marinas wrote:
> @@ -67,8 +64,8 @@ def func(parser, options, args):
> rev = strip_suffix('/', rev)
> if rev.endswith('/'):
> rev = strip_suffix('/', rev)
> - rev1 = rev + '//bottom'
> - rev2 = rev + '//top'
> + rev1 = rev + 'HEAD^'
> + rev2 = rev + 'HEAD'
This looks bogus. You probably want to s/HEAD// here.
I guess the test suite doesn't cover this? :-(
--
Karl Hasselström, kha@treskal.com
www.treskal.com/kalle
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 3/4] Convert git_id() to the new id format
2008-07-14 7:07 ` Karl Hasselström
@ 2008-08-21 21:39 ` Catalin Marinas
0 siblings, 0 replies; 17+ messages in thread
From: Catalin Marinas @ 2008-08-21 21:39 UTC (permalink / raw)
To: Karl Hasselström; +Cc: git
2008/7/14 Karl Hasselström <kha@treskal.com>:
> On 2008-07-13 12:40:48 +0100, Catalin Marinas wrote:
>
>> @@ -67,8 +64,8 @@ def func(parser, options, args):
>> rev = strip_suffix('/', rev)
>> if rev.endswith('/'):
>> rev = strip_suffix('/', rev)
>> - rev1 = rev + '//bottom'
>> - rev2 = rev + '//top'
>> + rev1 = rev + 'HEAD^'
>> + rev2 = rev + 'HEAD'
>
> This looks bogus. You probably want to s/HEAD// here.
Actually, the full "if" block here is useless. This was to specify
diff -r patch/ to show a patch but we now have the "show" command.
> I guess the test suite doesn't cover this? :-(
And it shouldn't, I removed it :-)
--
Catalin
^ permalink raw reply [flat|nested] 17+ messages in thread
* [StGit PATCH] Fix some remaining old-style stg id calls
2008-07-13 11:40 ` [PATCH 3/4] Convert git_id() to the new id format Catalin Marinas
2008-07-14 7:07 ` Karl Hasselström
@ 2008-07-25 0:47 ` Karl Hasselström
2008-07-27 8:24 ` Catalin Marinas
1 sibling, 1 reply; 17+ messages in thread
From: Karl Hasselström @ 2008-07-25 0:47 UTC (permalink / raw)
To: Catalin Marinas; +Cc: git
Signed-off-by: Karl Hasselström <kha@treskal.com>
---
You'll want to add this (just squash it into your patch). The calls
were failing, but since both sides produced the empty string on
stdout, the test was happy anyway.
t/t1300-uncommit.sh | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/t/t1300-uncommit.sh b/t/t1300-uncommit.sh
index a906d13..472baa4 100755
--- a/t/t1300-uncommit.sh
+++ b/t/t1300-uncommit.sh
@@ -42,7 +42,7 @@ test_expect_success \
'Uncommit the patches using names' \
'
stg uncommit bar foo &&
- [ "$(stg id foo//top)" = "$(stg id bar//bottom)" ] &&
+ [ "$(stg id foo)" = "$(stg id bar^)" ] &&
stg commit --all
'
@@ -50,7 +50,7 @@ test_expect_success \
'Uncommit the patches using prefix' \
'
stg uncommit --number=2 foobar &&
- [ "$(stg id foobar1//top)" = "$(stg id foobar2//bottom)" ] &&
+ [ "$(stg id foobar1)" = "$(stg id foobar2^)" ] &&
stg commit --all
'
@@ -58,7 +58,7 @@ test_expect_success \
'Uncommit the patches using auto names' \
'
stg uncommit --number=2 &&
- [ "$(stg id foo-patch//top)" = "$(stg id bar-patch//bottom)" ] &&
+ [ "$(stg id foo-patch)" = "$(stg id bar-patch^)" ] &&
stg commit --all
'
@@ -67,14 +67,14 @@ test_expect_success \
'
stg uncommit &&
stg uncommit &&
- [ "$(stg id foo-patch//top)" = "$(stg id bar-patch//bottom)" ] &&
+ [ "$(stg id foo-patch)" = "$(stg id bar-patch^)" ] &&
stg commit --all
'
test_expect_success \
'Uncommit the patches with --to' '
stg uncommit --to HEAD^ &&
- [ "$(stg id foo-patch//top)" = "$(stg id bar-patch//bottom)" ] &&
+ [ "$(stg id foo-patch)" = "$(stg id bar-patch^)" ] &&
stg commit --all
'
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 4/4] Remove the applied/unapplied commands
2008-07-13 11:40 [PATCH 0/4] Proposed patches Catalin Marinas
` (2 preceding siblings ...)
2008-07-13 11:40 ` [PATCH 3/4] Convert git_id() to the new id format Catalin Marinas
@ 2008-07-13 11:40 ` Catalin Marinas
2008-07-13 11:42 ` [PATCH 0/4] Proposed patches Catalin Marinas
2008-07-14 7:11 ` Karl Hasselström
5 siblings, 0 replies; 17+ messages in thread
From: Catalin Marinas @ 2008-07-13 11:40 UTC (permalink / raw)
To: Karl Hasselström, git
This patch moves the applied/unapplied functionality to the 'series'
command via the corresponding options.
Signed-off-by: Catalin Marinas <catalin.marinas@gmail.com>
---
stgit/commands/applied.py | 51 -------------------------------------------
stgit/commands/series.py | 25 ++++++++++++++++-----
stgit/commands/unapplied.py | 50 ------------------------------------------
stgit/main.py | 4 ---
t/t1002-branch-clone.sh | 6 +++--
t/t1003-new.sh | 4 ++-
t/t1200-push-modified.sh | 12 +++++-----
t/t1203-pop.sh | 12 +++++-----
t/t1204-pop-keep.sh | 12 +++++-----
t/t1205-push-subdir.sh | 4 ++-
t/t1301-repair.sh | 12 +++++-----
t/t1302-repair-interop.sh | 20 ++++++++---------
t/t1500-float.sh | 14 ++++++------
t/t1501-sink.sh | 2 +-
t/t1600-delete-one.sh | 28 ++++++++++++------------
t/t1601-delete-many.sh | 24 ++++++++++----------
t/t2000-sync.sh | 48 ++++++++++++++++++++--------------------
t/t2200-rebase.sh | 4 ++-
t/t2500-clean.sh | 12 +++++-----
t/t2600-coalesce.sh | 12 +++++-----
t/t3000-dirty-merge.sh | 8 +++----
t/t4000-upgrade.sh | 4 ++-
22 files changed, 138 insertions(+), 230 deletions(-)
delete mode 100644 stgit/commands/applied.py
delete mode 100644 stgit/commands/unapplied.py
diff --git a/stgit/commands/applied.py b/stgit/commands/applied.py
deleted file mode 100644
index e57c796..0000000
--- a/stgit/commands/applied.py
+++ /dev/null
@@ -1,51 +0,0 @@
-
-__copyright__ = """
-Copyright (C) 2005, Catalin Marinas <catalin.marinas@gmail.com>
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License version 2 as
-published by the Free Software Foundation.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-"""
-
-from optparse import make_option
-from stgit.out import *
-from stgit.commands import common
-
-
-help = 'print the applied patches'
-usage = """%prog [options]
-
-List the patches from the series which have already been pushed onto
-the stack. They are listed in the order in which they were pushed, the
-last one being the current (topmost) patch."""
-
-directory = common.DirectoryHasRepositoryLib()
-options = [make_option('-b', '--branch',
- help = 'use BRANCH instead of the default branch'),
- make_option('-c', '--count',
- help = 'print the number of applied patches',
- action = 'store_true')]
-
-
-def func(parser, options, args):
- """Show the applied patches
- """
- if len(args) != 0:
- parser.error('incorrect number of arguments')
-
- s = directory.repository.get_stack(options.branch)
-
- if options.count:
- out.stdout(len(s.patchorder.applied))
- else:
- for pn in s.patchorder.applied:
- out.stdout(pn)
diff --git a/stgit/commands/series.py b/stgit/commands/series.py
index c11c74f..b7899d7 100644
--- a/stgit/commands/series.py
+++ b/stgit/commands/series.py
@@ -37,7 +37,13 @@ options = [make_option('-b', '--branch',
make_option('-a', '--all',
help = 'show all patches, including the hidden ones',
action = 'store_true'),
- make_option('--hidden',
+ make_option('-A', '--applied',
+ help = 'show the applied patches only',
+ action = 'store_true'),
+ make_option('-U', '--unapplied',
+ help = 'show the unapplied patches only',
+ action = 'store_true'),
+ make_option('-H', '--hidden',
help = 'show the hidden patches only',
action = 'store_true'),
make_option('-m', '--missing', metavar = 'BRANCH',
@@ -112,17 +118,24 @@ def func(parser, options, args):
stack = directory.repository.get_stack(options.missing)
# current series patches
- if options.all:
+ applied = unapplied = hidden = ()
+ if options.applied or options.unapplied or options.hidden:
+ if options.all:
+ raise common.CmdException, \
+ '--all cannot be used with --applied/unapplied/hidden'
+ if options.applied:
+ applied = stack.patchorder.applied
+ if options.unapplied:
+ unapplied = stack.patchorder.unapplied
+ if options.hidden:
+ hidden = stack.patchorder.hidden
+ elif options.all:
applied = stack.patchorder.applied
unapplied = stack.patchorder.unapplied
hidden = stack.patchorder.hidden
- elif options.hidden:
- applied = unapplied = ()
- hidden = stack.patchorder.hidden
else:
applied = stack.patchorder.applied
unapplied = stack.patchorder.unapplied
- hidden = ()
if options.missing:
cmp_patches = cmp_stack.patchorder.all
diff --git a/stgit/commands/unapplied.py b/stgit/commands/unapplied.py
deleted file mode 100644
index 7323346..0000000
--- a/stgit/commands/unapplied.py
+++ /dev/null
@@ -1,50 +0,0 @@
-
-__copyright__ = """
-Copyright (C) 2005, Catalin Marinas <catalin.marinas@gmail.com>
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License version 2 as
-published by the Free Software Foundation.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-"""
-
-from optparse import make_option
-from stgit.out import *
-from stgit.commands import common
-
-
-help = 'print the unapplied patches'
-usage = """%prog [options]
-
-List the patches from the series which are not pushed onto the stack.
-They are listed in the reverse order in which they were popped."""
-
-directory = common.DirectoryHasRepositoryLib()
-options = [make_option('-b', '--branch',
- help = 'use BRANCH instead of the default branch'),
- make_option('-c', '--count',
- help = 'print the number of unapplied patches',
- action = 'store_true')]
-
-
-def func(parser, options, args):
- """Show the unapplied patches
- """
- if len(args) != 0:
- parser.error('incorrect number of arguments')
-
- s = directory.repository.get_stack(options.branch)
-
- if options.count:
- out.stdout(len(s.patchorder.unapplied))
- else:
- for pn in s.patchorder.unapplied:
- out.stdout(pn)
diff --git a/stgit/main.py b/stgit/main.py
index aa1f8ef..7be8e14 100644
--- a/stgit/main.py
+++ b/stgit/main.py
@@ -59,7 +59,6 @@ class Commands(dict):
return getattr(stgit.commands, cmd_mod)
commands = Commands({
- 'applied': 'applied',
'branch': 'branch',
'delete': 'delete',
'diff': 'diff',
@@ -96,7 +95,6 @@ commands = Commands({
'status': 'status',
'sync': 'sync',
'top': 'top',
- 'unapplied': 'unapplied',
'uncommit': 'uncommit',
'unhide': 'unhide'
})
@@ -107,7 +105,6 @@ repocommands = (
'id',
)
stackcommands = (
- 'applied',
'branch',
'clean',
'coalesce',
@@ -125,7 +122,6 @@ stackcommands = (
'series',
'sink',
'top',
- 'unapplied',
'uncommit',
'unhide',
)
diff --git a/t/t1002-branch-clone.sh b/t/t1002-branch-clone.sh
index 19bdc45..1303b41 100755
--- a/t/t1002-branch-clone.sh
+++ b/t/t1002-branch-clone.sh
@@ -29,16 +29,16 @@ test_expect_success \
'
stg branch --clone foo &&
stg new p1 -m "p1" &&
- test $(stg applied -c) -eq 1
+ test $(stg series --applied -c) -eq 1
'
test_expect_success \
'Clone the current StGIT branch' \
'
stg branch --clone bar &&
- test $(stg applied -c) -eq 1 &&
+ test $(stg series --applied -c) -eq 1 &&
stg new p2 -m "p2" &&
- test $(stg applied -c) -eq 2
+ test $(stg series --applied -c) -eq 2
'
test_done
diff --git a/t/t1003-new.sh b/t/t1003-new.sh
index 0be5d9b..826e41d 100755
--- a/t/t1003-new.sh
+++ b/t/t1003-new.sh
@@ -17,13 +17,13 @@ test_expect_success \
test_expect_success \
'Create a named patch' '
stg new foo -m foobar &&
- [ $(stg applied -c) -eq 1 ]
+ [ $(stg series --applied -c) -eq 1 ]
'
test_expect_success \
'Create a patch without giving a name' '
stg new -m yo &&
- [ $(stg applied -c) -eq 2 ]
+ [ $(stg series --applied -c) -eq 2 ]
'
test_done
diff --git a/t/t1200-push-modified.sh b/t/t1200-push-modified.sh
index 2edc760..113e41d 100755
--- a/t/t1200-push-modified.sh
+++ b/t/t1200-push-modified.sh
@@ -26,8 +26,8 @@ test_expect_success \
printf "a\nc\n" > file && git add file && stg refresh &&
stg new p2 -m p2 &&
printf "a\nb\nc\n" > file && stg refresh &&
- [ "$(echo $(stg applied))" = "p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
)
'
@@ -57,8 +57,8 @@ test_expect_success \
'Rollback the push' '
(
cd bar && stg push --undo &&
- [ "$(echo $(stg applied))" = "" ] &&
- [ "$(echo $(stg unapplied))" = "p1 p2" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p1 p2" ]
)
'
@@ -66,8 +66,8 @@ test_expect_success \
'Push those patches while checking they were merged upstream' '
(
cd bar && stg push --merged --all
- [ "$(echo $(stg applied))" = "p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
)
'
diff --git a/t/t1203-pop.sh b/t/t1203-pop.sh
index 6e49b4d..e1ed577 100755
--- a/t/t1203-pop.sh
+++ b/t/t1203-pop.sh
@@ -12,22 +12,22 @@ test_expect_success \
for i in 0 1 2 3 4 5 6 7 8 9; do
stg new p$i -m p$i;
done &&
- [ "$(echo $(stg applied))" = "p0 p1 p2 p3 p4 p5 p6 p7 p8 p9" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2 p3 p4 p5 p6 p7 p8 p9" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_expect_success \
'Pop half the patches' '
stg pop -n 5 &&
- [ "$(echo $(stg applied))" = "p0 p1 p2 p3 p4" ] &&
- [ "$(echo $(stg unapplied))" = "p5 p6 p7 p8 p9" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2 p3 p4" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p5 p6 p7 p8 p9" ]
'
test_expect_success \
'Pop the remaining patches' '
stg pop -a &&
- [ "$(echo $(stg applied))" = "" ] &&
- [ "$(echo $(stg unapplied))" = "p0 p1 p2 p3 p4 p5 p6 p7 p8 p9" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p0 p1 p2 p3 p4 p5 p6 p7 p8 p9" ]
'
test_done
diff --git a/t/t1204-pop-keep.sh b/t/t1204-pop-keep.sh
index 35f4ec0..db473f2 100755
--- a/t/t1204-pop-keep.sh
+++ b/t/t1204-pop-keep.sh
@@ -11,8 +11,8 @@ test_expect_success 'Create a few patches' '
git add patch$i.txt &&
stg refresh
done &&
- [ "$(echo $(stg applied))" = "p0 p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_expect_success 'Make some non-conflicting local changes' '
@@ -21,8 +21,8 @@ test_expect_success 'Make some non-conflicting local changes' '
test_expect_success 'Pop two patches, keeping local changes' '
stg pop -n 2 --keep &&
- [ "$(echo $(stg applied))" = "p0" ] &&
- [ "$(echo $(stg unapplied))" = "p1 p2" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p0" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p1 p2" ] &&
[ "$(echo $(ls patch?.txt))" = "patch0.txt" ] &&
[ "$(echo $(cat patch0.txt))" = "patch0 local" ]
'
@@ -34,8 +34,8 @@ test_expect_success 'Reset and push patches again' '
test_expect_success 'Pop a patch without local changes' '
stg pop --keep &&
- [ "$(echo $(stg applied))" = "p0 p1" ] &&
- [ "$(echo $(stg unapplied))" = "p2" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p2" ] &&
[ "$(echo $(ls patch?.txt))" = "patch0.txt patch1.txt" ]
'
diff --git a/t/t1205-push-subdir.sh b/t/t1205-push-subdir.sh
index 945eb74..f852762 100755
--- a/t/t1205-push-subdir.sh
+++ b/t/t1205-push-subdir.sh
@@ -12,8 +12,8 @@ test_expect_success 'Create some patches' '
git add x.txt foo/y.txt &&
stg refresh
done &&
- [ "$(echo $(stg applied))" = "p0 p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_expect_success 'Fast-forward push from a subdir' '
diff --git a/t/t1301-repair.sh b/t/t1301-repair.sh
index 33f8f6d..8d5d4e5 100755
--- a/t/t1301-repair.sh
+++ b/t/t1301-repair.sh
@@ -37,9 +37,9 @@ test_expect_success \
'
test_expect_success 'Turn one GIT commit into a patch' '
- [ $(stg applied | wc -l) -eq 1 ] &&
+ [ $(stg series --applied -c) -eq 1 ] &&
stg repair &&
- [ $(stg applied | wc -l) -eq 2 ]
+ [ $(stg series --applied -c) -eq 2 ]
'
test_expect_success \
@@ -55,9 +55,9 @@ test_expect_success \
'
test_expect_success 'Turn three GIT commits into patches' '
- [ $(stg applied | wc -l) -eq 2 ] &&
+ [ $(stg series --applied -c) -eq 2 ] &&
stg repair &&
- [ $(stg applied | wc -l) -eq 5 ]
+ [ $(stg series --applied -c) -eq 5 ]
'
test_expect_success \
@@ -72,9 +72,9 @@ test_expect_success \
'
test_expect_success 'Repair in the presence of a merge commit' '
- [ $(stg applied | wc -l) -eq 5 ] &&
+ [ $(stg series --applied -c) -eq 5 ] &&
stg repair &&
- [ $(stg applied | wc -l) -eq 0 ]
+ [ $(stg series --applied -c) -eq 0 ]
'
test_done
diff --git a/t/t1302-repair-interop.sh b/t/t1302-repair-interop.sh
index 3ea48e7..224c4ba 100755
--- a/t/t1302-repair-interop.sh
+++ b/t/t1302-repair-interop.sh
@@ -21,8 +21,8 @@ test_expect_success 'Create five patches' '
for i in 0 1 2 3 4; do
stg new p$i -m p$i;
done &&
- [ "$(echo $(stg applied))" = "p0 p1 p2 p3 p4" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2 p3 p4" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_expect_success 'Pop two patches with git-reset' '
@@ -30,14 +30,14 @@ test_expect_success 'Pop two patches with git-reset' '
command_error stg refresh &&
stg repair &&
stg refresh &&
- [ "$(echo $(stg applied))" = "p0 p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "p3 p4" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p3 p4" ]
'
test_expect_success 'Create a new patch' '
stg new q0 -m q0 &&
- [ "$(echo $(stg applied))" = "p0 p1 p2 q0" ] &&
- [ "$(echo $(stg unapplied))" = "p3 p4" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2 q0" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p3 p4" ]
'
test_expect_success 'Go to an unapplied patch with with git-reset' '
@@ -45,15 +45,15 @@ test_expect_success 'Go to an unapplied patch with with git-reset' '
command_error stg refresh &&
stg repair &&
stg refresh &&
- [ "$(echo $(stg applied))" = "p0 p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "q0 p4" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "q0 p4" ]
'
test_expect_success 'Go back to below the stack base with git-reset' '
git reset --hard foo-tag &&
stg repair &&
- [ "$(echo $(stg applied))" = "" ] &&
- [ "$(echo $(stg unapplied))" = "p0 p1 p2 p3 q0 p4" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p0 p1 p2 p3 q0 p4" ]
'
test_done
diff --git a/t/t1500-float.sh b/t/t1500-float.sh
index 778fde4..e44af3a 100755
--- a/t/t1500-float.sh
+++ b/t/t1500-float.sh
@@ -20,37 +20,37 @@ test_expect_success \
stg new F -m "f" && echo F >f.txt && git add f.txt && stg refresh &&
stg new G -m "g" && echo G >g.txt && git add g.txt && stg refresh &&
stg pop &&
- test "$(echo $(stg applied))" = "A B C D E F"
+ test "$(echo $(stg series --applied --noprefix))" = "A B C D E F"
'
test_expect_success \
'Float A to top' \
'stg float A &&
- test "$(echo $(stg applied))" = "B C D E F A"
+ test "$(echo $(stg series --applied --noprefix))" = "B C D E F A"
'
test_expect_success \
'Float A to top (noop)' \
'stg float A &&
- test "$(echo $(stg applied))" = "B C D E F A"
+ test "$(echo $(stg series --applied --noprefix))" = "B C D E F A"
'
test_expect_success \
'Float B C to top' \
'stg float B C &&
- test "$(echo $(stg applied))" = "D E F A B C"
+ test "$(echo $(stg series --applied --noprefix))" = "D E F A B C"
'
test_expect_success \
'Float E A to top' \
'stg float E A &&
- test "$(echo $(stg applied))" = "D F B C E A"
+ test "$(echo $(stg series --applied --noprefix))" = "D F B C E A"
'
test_expect_success \
'Float E to top' \
'stg float E &&
- test "$(echo $(stg applied))" = "D F B C A E"
+ test "$(echo $(stg series --applied --noprefix))" = "D F B C A E"
'
test_expect_success \
'Float G F to top' \
'stg float G F &&
- test "$(echo $(stg applied))" = "D B C A E G F"
+ test "$(echo $(stg series --applied --noprefix))" = "D B C A E G F"
'
test_done
diff --git a/t/t1501-sink.sh b/t/t1501-sink.sh
index ac9e25d..32931cd 100755
--- a/t/t1501-sink.sh
+++ b/t/t1501-sink.sh
@@ -22,7 +22,7 @@ test_expect_success 'sink without applied patches' '
test_expect_success 'sink a specific patch without applied patches' '
stg sink y &&
- test $(echo $(stg applied)) = "y"
+ test $(echo $(stg series --applied --noprefix)) = "y"
'
test_done
diff --git a/t/t1600-delete-one.sh b/t/t1600-delete-one.sh
index b526a55..ef0b29d 100755
--- a/t/t1600-delete-one.sh
+++ b/t/t1600-delete-one.sh
@@ -19,27 +19,27 @@ test_expect_success \
test_expect_success \
'Try to delete a non-existing patch' \
'
- [ $(stg applied | wc -l) -eq 1 ] &&
+ [ $(stg series --applied -c) -eq 1 ] &&
command_error stg delete bar &&
- [ $(stg applied | wc -l) -eq 1 ]
+ [ $(stg series --applied -c) -eq 1 ]
'
test_expect_success \
'Try to delete the topmost patch while dirty' \
'
echo dirty >> foo.txt &&
- [ $(stg applied | wc -l) -eq 1 ] &&
+ [ $(stg series --applied -c) -eq 1 ] &&
command_error stg delete foo &&
- [ $(stg applied | wc -l) -eq 1 ] &&
+ [ $(stg series --applied -c) -eq 1 ] &&
git reset --hard
'
test_expect_success \
'Delete the topmost patch' \
'
- [ $(stg applied | wc -l) -eq 1 ] &&
+ [ $(stg series --applied -c) -eq 1 ] &&
stg delete foo &&
- [ $(stg applied | wc -l) -eq 0 ]
+ [ $(stg series --applied -c) -eq 0 ]
'
test_expect_success \
@@ -55,9 +55,9 @@ test_expect_success \
test_expect_success \
'Delete an unapplied patch' \
'
- [ $(stg unapplied | wc -l) -eq 1 ] &&
+ [ $(stg series --unapplied -c) -eq 1 ] &&
stg delete foo &&
- [ $(stg unapplied | wc -l) -eq 0 ]
+ [ $(stg series --unapplied -c) -eq 0 ]
'
test_expect_success \
@@ -76,9 +76,9 @@ test_expect_success \
test_expect_success \
'Try to delete a non-topmost applied patch' \
'
- [ $(stg applied | wc -l) -eq 2 ] &&
+ [ $(stg series --applied -c) -eq 2 ] &&
stg delete foo &&
- [ $(stg applied | wc -l) -eq 1 ]
+ [ $(stg series --applied -c) -eq 1 ]
'
test_expect_success \
@@ -99,11 +99,11 @@ test_expect_success \
test_expect_success \
'Delete a patch in another branch' \
'
- [ $(stg applied | wc -l) -eq 2 ] &&
- [ $(stg applied -b br | wc -l) -eq 1 ] &&
+ [ $(stg series --applied -c) -eq 2 ] &&
+ [ $(stg series --applied -b br -c) -eq 1 ] &&
stg delete -b br baz &&
- [ $(stg applied | wc -l) -eq 2 ] &&
- [ $(stg applied -b br | wc -l) -eq 0 ]
+ [ $(stg series --applied -c) -eq 2 ] &&
+ [ $(stg series --applied -b br -c) -eq 0 ]
'
test_done
diff --git a/t/t1601-delete-many.sh b/t/t1601-delete-many.sh
index bc5364f..cb7fb0d 100755
--- a/t/t1601-delete-many.sh
+++ b/t/t1601-delete-many.sh
@@ -25,31 +25,31 @@ test_expect_success \
test_expect_success \
'Delete some patches' \
'
- [ "$(echo $(stg applied))" = "p0 p1 p2 p3 p4" ] &&
- [ "$(echo $(stg unapplied))" = "p5 p6 p7 p8 p9" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2 p3 p4" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p5 p6 p7 p8 p9" ] &&
stg delete p7 p6 p3 p4 &&
- [ "$(echo $(stg applied))" = "p0 p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "p5 p8 p9" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p5 p8 p9" ]
'
test_expect_success \
'Delete some more patches, some of which do not exist' \
'
- [ "$(echo $(stg applied))" = "p0 p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "p5 p8 p9" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p5 p8 p9" ] &&
command_error stg delete p7 p8 p2 p0 &&
- [ "$(echo $(stg applied))" = "p0 p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "p5 p8 p9" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p5 p8 p9" ]
'
test_expect_success \
'Delete a range of patches' \
'
- [ "$(echo $(stg applied))" = "p0 p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "p5 p8 p9" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p5 p8 p9" ] &&
stg delete p1..p8 &&
- [ "$(echo $(stg applied))" = "p0" ] &&
- [ "$(echo $(stg unapplied))" = "p9" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p9" ]
'
test_done
diff --git a/t/t2000-sync.sh b/t/t2000-sync.sh
index f4e8b07..00ea7bd 100755
--- a/t/t2000-sync.sh
+++ b/t/t2000-sync.sh
@@ -30,8 +30,8 @@ test_expect_success \
stg refresh &&
stg export &&
stg pop &&
- [ "$(echo $(stg applied))" = "p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "p3" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p3" ]
'
test_expect_success \
@@ -41,16 +41,16 @@ test_expect_success \
stg new p1 -m p1 &&
stg new p2 -m p2 &&
stg new p3 -m p3 &&
- [ "$(echo $(stg applied))" = "p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_expect_success \
'Synchronise second patch with the master branch' \
'
stg sync -B master p2 &&
- [ "$(echo $(stg applied))" = "p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ] &&
test $(cat foo2.txt) = "foo2"
'
@@ -58,8 +58,8 @@ test_expect_success \
'Synchronise the first two patches with the master branch' \
'
stg sync -B master -a &&
- [ "$(echo $(stg applied))" = "p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ] &&
test $(cat foo1.txt) = "foo1" &&
test $(cat foo2.txt) = "foo2"
'
@@ -68,8 +68,8 @@ test_expect_success \
'Synchronise all the patches with the exported series' \
'
stg sync -s patches-master/series -a &&
- [ "$(echo $(stg applied))" = "p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ] &&
test $(cat foo1.txt) = "foo1" &&
test $(cat foo2.txt) = "foo2" &&
test $(cat foo3.txt) = "foo3"
@@ -79,8 +79,8 @@ test_expect_success \
'Modify the master patches' \
'
stg branch master &&
- [ "$(echo $(stg applied))" = "p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "p3" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p3" ] &&
stg goto p1 &&
echo bar1 >> foo1.txt &&
stg refresh &&
@@ -91,8 +91,8 @@ test_expect_success \
stg goto p3 &&
echo bar3 >> foo3.txt &&
stg refresh &&
- [ "$(echo $(stg applied))" = "p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ] &&
stg export &&
stg branch foo
'
@@ -101,8 +101,8 @@ test_expect_success \
'Synchronise second patch with the master branch' \
'
stg sync -B master p2 &&
- [ "$(echo $(stg applied))" = "p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ] &&
test $(cat bar2.txt) = "bar2"
'
@@ -115,13 +115,13 @@ test_expect_success \
test_expect_success \
'Restore the stack status after the failed sync' \
'
- [ "$(echo $(stg applied))" = "p1" ] &&
- [ "$(echo $(stg unapplied))" = "p2 p3" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p2 p3" ] &&
stg resolved -a &&
stg refresh &&
stg goto p3
- [ "$(echo $(stg applied))" = "p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_expect_success \
@@ -133,12 +133,12 @@ test_expect_success \
test_expect_success \
'Restore the stack status after the failed sync' \
'
- [ "$(echo $(stg applied))" = "p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ] &&
stg resolved -a &&
stg refresh &&
- [ "$(echo $(stg applied))" = "p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_done
diff --git a/t/t2200-rebase.sh b/t/t2200-rebase.sh
index 256eaaa..adbf242 100755
--- a/t/t2200-rebase.sh
+++ b/t/t2200-rebase.sh
@@ -28,7 +28,7 @@ test_expect_success \
'
stg rebase master~1 &&
test `stg id stack:{base}` = `git rev-parse master~1` &&
- test `stg applied | wc -l` = 1
+ test `stg series --applied -c` = 1
'
test_expect_success \
@@ -40,7 +40,7 @@ test_expect_success \
test_expect_success \
'Check patches were re-applied' \
'
- test $(stg applied | wc -l) = 1
+ test $(stg series --applied -c) = 1
'
test_done
diff --git a/t/t2500-clean.sh b/t/t2500-clean.sh
index abde9cf..99fd29f 100755
--- a/t/t2500-clean.sh
+++ b/t/t2500-clean.sh
@@ -17,11 +17,11 @@ test_expect_success 'Initialize StGit stack' '
'
test_expect_success 'Clean empty patches' '
- [ "$(echo $(stg applied))" = "e0 p0 e1" ] &&
- [ "$(echo $(stg unapplied))" = "e2" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "e0 p0 e1" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "e2" ] &&
stg clean &&
- [ "$(echo $(stg applied))" = "p0" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_expect_success 'Create a conflict' '
@@ -37,8 +37,8 @@ test_expect_success 'Create a conflict' '
test_expect_success 'Make sure conflicting patches are preserved' '
stg clean &&
- [ "$(echo $(stg applied))" = "p0 p2 p1" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p2 p1" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_done
diff --git a/t/t2600-coalesce.sh b/t/t2600-coalesce.sh
index f13a309..ef5bf99 100755
--- a/t/t2600-coalesce.sh
+++ b/t/t2600-coalesce.sh
@@ -15,17 +15,17 @@ test_expect_success 'Initialize StGit stack' '
'
test_expect_success 'Coalesce some patches' '
- [ "$(echo $(stg applied))" = "p0 p1 p2 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ] &&
stg coalesce --name=q0 --message="wee woo" p1 p2 &&
- [ "$(echo $(stg applied))" = "p0 q0 p3" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 q0 p3" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_expect_success 'Coalesce at stack top' '
stg coalesce --name=q1 --message="wee woo wham" q0 p3 &&
- [ "$(echo $(stg applied))" = "p0 q1" ] &&
- [ "$(echo $(stg unapplied))" = "" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 q1" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "" ]
'
test_done
diff --git a/t/t3000-dirty-merge.sh b/t/t3000-dirty-merge.sh
index 4dd6da3..f0f79d5 100755
--- a/t/t3000-dirty-merge.sh
+++ b/t/t3000-dirty-merge.sh
@@ -24,11 +24,11 @@ test_expect_success 'Pop one patch and update the other' '
test_expect_success 'Push with dirty worktree' '
echo 4 > a &&
- [ "$(echo $(stg applied))" = "p1" ] &&
- [ "$(echo $(stg unapplied))" = "p2" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p2" ] &&
conflict stg goto p2 &&
- [ "$(echo $(stg applied))" = "p1" ] &&
- [ "$(echo $(stg unapplied))" = "p2" ] &&
+ [ "$(echo $(stg series --applied --noprefix))" = "p1" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p2" ] &&
[ "$(echo $(cat a))" = "4" ]
'
diff --git a/t/t4000-upgrade.sh b/t/t4000-upgrade.sh
index ea9bf0b..b89c720 100755
--- a/t/t4000-upgrade.sh
+++ b/t/t4000-upgrade.sh
@@ -14,8 +14,8 @@ for ver in 0.12 0.8; do
test_expect_success \
"v$ver: Check the list of applied and unapplied patches" '
- [ "$(echo $(stg applied))" = "p0 p1 p2" ] &&
- [ "$(echo $(stg unapplied))" = "p3 p4" ]
+ [ "$(echo $(stg series --applied --noprefix))" = "p0 p1 p2" ] &&
+ [ "$(echo $(stg series --unapplied --noprefix))" = "p3 p4" ]
'
test_expect_success \
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH 0/4] Proposed patches
2008-07-13 11:40 [PATCH 0/4] Proposed patches Catalin Marinas
` (3 preceding siblings ...)
2008-07-13 11:40 ` [PATCH 4/4] Remove the applied/unapplied commands Catalin Marinas
@ 2008-07-13 11:42 ` Catalin Marinas
2008-07-13 18:57 ` Lukas Sandström
2008-07-14 7:11 ` Karl Hasselström
5 siblings, 1 reply; 17+ messages in thread
From: Catalin Marinas @ 2008-07-13 11:42 UTC (permalink / raw)
To: Karl Hasselström, git
2008/7/13 Catalin Marinas <catalin.marinas@gmail.com>:
> A new post of the proposed patches after implementing Karl's comments.
BTW, these are StGIT patches, I forgot to add the prefix in the subject line.
--
Catalin
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 0/4] Proposed patches
2008-07-13 11:42 ` [PATCH 0/4] Proposed patches Catalin Marinas
@ 2008-07-13 18:57 ` Lukas Sandström
2008-07-13 21:10 ` Catalin Marinas
0 siblings, 1 reply; 17+ messages in thread
From: Lukas Sandström @ 2008-07-13 18:57 UTC (permalink / raw)
To: Catalin Marinas; +Cc: git
Catalin Marinas wrote:
> 2008/7/13 Catalin Marinas <catalin.marinas@gmail.com>:
>> A new post of the proposed patches after implementing Karl's comments.
>
> BTW, these are StGIT patches, I forgot to add the prefix in the subject line.
>
If you run "git config format.subjectprefix 'StGIT PATCH'" in your repo,
git format-patch will add the prefix automatically for you.
StGIT might have a similar option.
/Lukas
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/4] Proposed patches
2008-07-13 18:57 ` Lukas Sandström
@ 2008-07-13 21:10 ` Catalin Marinas
0 siblings, 0 replies; 17+ messages in thread
From: Catalin Marinas @ 2008-07-13 21:10 UTC (permalink / raw)
To: Lukas Sandström; +Cc: git
2008/7/13 Lukas Sandström <lukass@etek.chalmers.se>:
> Catalin Marinas wrote:
>> 2008/7/13 Catalin Marinas <catalin.marinas@gmail.com>:
>>> A new post of the proposed patches after implementing Karl's comments.
>>
>> BTW, these are StGIT patches, I forgot to add the prefix in the subject line.
>>
> If you run "git config format.subjectprefix 'StGIT PATCH'" in your repo,
> git format-patch will add the prefix automatically for you.
>
> StGIT might have a similar option.
No, it doesn't, but it would be good to have one. The alternative in
StGIT is to modify the (local) template file.
Thanks,
--
Catalin
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/4] Proposed patches
2008-07-13 11:40 [PATCH 0/4] Proposed patches Catalin Marinas
` (4 preceding siblings ...)
2008-07-13 11:42 ` [PATCH 0/4] Proposed patches Catalin Marinas
@ 2008-07-14 7:11 ` Karl Hasselström
5 siblings, 0 replies; 17+ messages in thread
From: Karl Hasselström @ 2008-07-14 7:11 UTC (permalink / raw)
To: Catalin Marinas; +Cc: git
On 2008-07-13 12:40:17 +0100, Catalin Marinas wrote:
> A new post of the proposed patches after implementing Karl's
> comments.
Looks good -- except for the places where I posted some more comments.
;-)
--
Karl Hasselström, kha@treskal.com
www.treskal.com/kalle
^ permalink raw reply [flat|nested] 17+ messages in thread