[GSoC PATCH 0/3] doc: improve gitprotocol-pack

[GSoC PATCH 0/3] doc: improve gitprotocol-pack

[LorenzoPegorari]

While studying the `gitprotocol-pack` documentation, I found various
small style inconsistencies.

The patches are just tiny, simple improvements, mostly to improve the
clarity of the documentation.

LorenzoPegorari (3):
  doc: gitprotocol-pack: fix pronoun-antecedent agreement
  doc: gitprotocol-pack: improve paragraphs structure
  doc: gitprotocol-pack: normalize inline code formatting

 Documentation/gitprotocol-pack.adoc | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

-- 
2.43.0

[GSoC PATCH 1/3] doc: gitprotocol-pack: fix pronoun-antecedent agreement

[LorenzoPegorari]

Fix "pronoun-antecedent agreement" errors.

Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
---
 Documentation/gitprotocol-pack.adoc | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
index 837b691c89..9952fac188 100644
--- a/Documentation/gitprotocol-pack.adoc
+++ b/Documentation/gitprotocol-pack.adoc
@@ -65,7 +65,7 @@ Extra Parameters
 ----------------
 
 The protocol provides a mechanism in which clients can send additional
-information in its first message to the server. These are called "Extra
+information in their first message to the server. These are called "Extra
 Parameters", and are supported by the Git, SSH, and HTTP protocols.
 
 Each Extra Parameter takes the form of `<key>=<value>` or `<key>`.
@@ -277,7 +277,7 @@ out of what the server said it could do with the first 'want' line.
   filter-request    =  PKT-LINE("filter" SP filter-spec)
 ----
 
-Clients MUST send all the obj-ids it wants from the reference
+Clients MUST send all the obj-ids they want from the reference
 discovery phase as 'want' lines. Clients MUST send at least one
 'want' command in the request body. Clients MUST NOT mention an
 obj-id in a 'want' command which did not appear in the response
-- 
2.43.0

[GSoC PATCH 2/3] doc: gitprotocol-pack: improve paragraphs structure

[LorenzoPegorari]

Logically separate the introductory sentence from the first transport
description to improve readability and structural clarity.

Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
---
 Documentation/gitprotocol-pack.adoc | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
index 9952fac188..f4c9e024b0 100644
--- a/Documentation/gitprotocol-pack.adoc
+++ b/Documentation/gitprotocol-pack.adoc
@@ -47,7 +47,9 @@ process defined in this protocol is terminated.
 Transports
 ----------
 There are three transports over which the packfile protocol is
-initiated.  The Git transport is a simple, unauthenticated server that
+initiated.
+
+The Git transport is a simple, unauthenticated server that
 takes the command (almost always 'upload-pack', though Git
 servers can be configured to be globally writable, in which 'receive-
 pack' initiation is also allowed) with which the client wishes to
-- 
2.43.0

[GSoC PATCH 3/3] doc: gitprotocol-pack: normalize inline code formatting

[LorenzoPegorari]

Uniform inline code usage for command and process names.

Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
---
 Documentation/gitprotocol-pack.adoc | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
index f4c9e024b0..63d3971037 100644
--- a/Documentation/gitprotocol-pack.adoc
+++ b/Documentation/gitprotocol-pack.adoc
@@ -117,7 +117,7 @@ process on the server side over the Git protocol is this:
 SSH Transport
 -------------
 
-Initiating the upload-pack or receive-pack processes over SSH is
+Initiating the 'upload-pack' or 'receive-pack' processes over SSH is
 executing the binary on the server via SSH remote execution.
 It is basically equivalent to running this:
 
@@ -131,7 +131,7 @@ two commands, or even just one of them.
 
 In an ssh:// format URI, it's absolute in the URI, so the '/' after
 the host name (or port number) is sent as an argument, which is then
-read by the remote git-upload-pack exactly as is, so it's effectively
+read by the remote `git-upload-pack` exactly as is, so it's effectively
 an absolute path in the remote filesystem.
 
        git clone ssh://user@example.com/project.git
@@ -163,7 +163,7 @@ supports passing environment variables as an argument.
 
 A few things to remember here:
 
-- The "command name" is spelled with dash (e.g. git-upload-pack), but
+- The "command name" is spelled with dash (e.g. `git-upload-pack`), but
   this can be overridden by the client;
 
 - The repository path is always quoted with single quotes.
@@ -377,10 +377,10 @@ In multi_ack_detailed mode:
 
 Without either multi_ack or multi_ack_detailed:
 
- * upload-pack sends "ACK obj-id" on the first common object it finds.
+ * `upload-pack` sends "ACK obj-id" on the first common object it finds.
    After that it says nothing until the client gives it a "done".
 
- * upload-pack sends "NAK" on a flush-pkt if no common object
+ * `upload-pack` sends "NAK" on a flush-pkt if no common object
    has been found yet.  If one has been found, and thus an ACK
    was already sent, it's silent on the flush-pkt.
 
-- 
2.43.0

Re: [GSoC PATCH 3/3] doc: gitprotocol-pack: normalize inline code formatting

[Junio C Hamano]

LorenzoPegorari <lorenzo.pegorari2002@gmail.com> writes:

> Uniform inline code usage for command and process names.
>
> Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
> ---
>  Documentation/gitprotocol-pack.adoc | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
> index f4c9e024b0..63d3971037 100644
> --- a/Documentation/gitprotocol-pack.adoc
> +++ b/Documentation/gitprotocol-pack.adoc
> @@ -117,7 +117,7 @@ process on the server side over the Git protocol is this:
>  SSH Transport
>  -------------
>  
> -Initiating the upload-pack or receive-pack processes over SSH is
> +Initiating the 'upload-pack' or 'receive-pack' processes over SSH is

These are not `backquoted` for <tt>teletype text</tt> typesetting,
like the other hunks in this patch do?

All other things in these three patches I found them reasonable,
except for this hunk.

Thanks.

>  executing the binary on the server via SSH remote execution.
>  It is basically equivalent to running this:
>  
> @@ -131,7 +131,7 @@ two commands, or even just one of them.
>  
>  In an ssh:// format URI, it's absolute in the URI, so the '/' after
>  the host name (or port number) is sent as an argument, which is then
> -read by the remote git-upload-pack exactly as is, so it's effectively
> +read by the remote `git-upload-pack` exactly as is, so it's effectively
>  an absolute path in the remote filesystem.
>  
>         git clone ssh://user@example.com/project.git
> @@ -163,7 +163,7 @@ supports passing environment variables as an argument.
>  
>  A few things to remember here:
>  
> -- The "command name" is spelled with dash (e.g. git-upload-pack), but
> +- The "command name" is spelled with dash (e.g. `git-upload-pack`), but
>    this can be overridden by the client;
>  
>  - The repository path is always quoted with single quotes.
> @@ -377,10 +377,10 @@ In multi_ack_detailed mode:
>  
>  Without either multi_ack or multi_ack_detailed:
>  
> - * upload-pack sends "ACK obj-id" on the first common object it finds.
> + * `upload-pack` sends "ACK obj-id" on the first common object it finds.
>     After that it says nothing until the client gives it a "done".
>  
> - * upload-pack sends "NAK" on a flush-pkt if no common object
> + * `upload-pack` sends "NAK" on a flush-pkt if no common object
>     has been found yet.  If one has been found, and thus an ACK
>     was already sent, it's silent on the flush-pkt.

Re: [GSoC PATCH 3/3] doc: gitprotocol-pack: normalize inline code formatting

[Lorenzo Pegorari]

On Mon, Mar 02, 2026 at 03:01:17PM -0800, Junio C Hamano wrote:
> LorenzoPegorari <lorenzo.pegorari2002@gmail.com> writes:
> 
> > Uniform inline code usage for command and process names.
> >
> > Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
> > ---
> >  Documentation/gitprotocol-pack.adoc | 10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
> > index f4c9e024b0..63d3971037 100644
> > --- a/Documentation/gitprotocol-pack.adoc
> > +++ b/Documentation/gitprotocol-pack.adoc
> > @@ -117,7 +117,7 @@ process on the server side over the Git protocol is this:
> >  SSH Transport
> >  -------------
> >  
> > -Initiating the upload-pack or receive-pack processes over SSH is
> > +Initiating the 'upload-pack' or 'receive-pack' processes over SSH is
> 
> These are not `backquoted` for <tt>teletype text</tt> typesetting,
> like the other hunks in this patch do?
> 
> All other things in these three patches I found them reasonable,
> except for this hunk.
> 
> Thanks.

Thank you so much for catching all my mistakes Junio.

I misread the existing formatting: I mistook the apostrophes for
backticks, and so I incorrectly assumed that the document used inline
code for command and process names. In reality, the rest of the document
uses italics for these elements.

I'm sending a v2 where I correctly uniform command and process names to
use the italic style ASAP.

Re: [GSoC PATCH 3/3] doc: gitprotocol-pack: normalize inline code formatting

[Junio C Hamano]

Lorenzo Pegorari <lorenzo.pegorari2002@gmail.com> writes:

>> > -Initiating the upload-pack or receive-pack processes over SSH is
>> > +Initiating the 'upload-pack' or 'receive-pack' processes over SSH is
>> 
>> These are not `backquoted` for <tt>teletype text</tt> typesetting,
>> like the other hunks in this patch do?
>> 
>> All other things in these three patches I found them reasonable,
>> except for this hunk.
>> 
>> Thanks.
>
> Thank you so much for catching all my mistakes Junio.
>
> I misread the existing formatting: I mistook the apostrophes for
> backticks, and so I incorrectly assumed that the document used inline
> code for command and process names. In reality, the rest of the document
> uses italics for these elements.
>
> I'm sending a v2 where I correctly uniform command and process names to
> use the italic style ASAP.

Sorry but I am confused.  

I am not sure we want <em>emphasis</em> for most of these things;
when we spell names of commands that users would type literally, in
which case we would do the <tt>monospaced</tt>, no?

I may be way off, though.  I'd appreciate our Doc experts to inject
a bit of sanity.

Thanks.

[GSoC PATCH v2 0/3] doc: improve gitprotocol-pack

[LorenzoPegorari]

While studying the `gitprotocol-pack` documentation, I found various
small style inconsistencies.

These patches are just tiny, simple improvements, mostly to improve the
clarity of the documentation.

V2 DIFF:
 * Fixed final patch to properly conform command and process names to
   italic format, instead of the inline code format

LorenzoPegorari (3):
  doc: gitprotocol-pack: fix pronoun-antecedent agreement
  doc: gitprotocol-pack: improve paragraphs structure
  doc: gitprotocol-pack: normalize italic formatting

 Documentation/gitprotocol-pack.adoc | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

Range-diff against v1:
1:  0d679e5eb5 = 1:  0d679e5eb5 doc: gitprotocol-pack: fix pronoun-antecedent agreement
2:  8a6b5d4c98 = 2:  8a6b5d4c98 doc: gitprotocol-pack: improve paragraphs structure
3:  e0e4ea3d22 ! 3:  6410967d65 doc: gitprotocol-pack: normalize inline code formatting
    @@ Metadata
     Author: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
     
      ## Commit message ##
    -    doc: gitprotocol-pack: normalize inline code formatting
    +    doc: gitprotocol-pack: normalize italic formatting
     
    -    Uniform inline code usage for command and process names.
    +    Uniform italic style usage for command and process names.
     
         Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
     
    @@ Documentation/gitprotocol-pack.adoc: supports passing environment variables as a
      A few things to remember here:
      
     -- The "command name" is spelled with dash (e.g. git-upload-pack), but
    -+- The "command name" is spelled with dash (e.g. `git-upload-pack`), but
    ++- The "command name" is spelled with dash (e.g. 'git-upload-pack'), but
        this can be overridden by the client;
      
      - The repository path is always quoted with single quotes.
    @@ Documentation/gitprotocol-pack.adoc: In multi_ack_detailed mode:
      Without either multi_ack or multi_ack_detailed:
      
     - * upload-pack sends "ACK obj-id" on the first common object it finds.
    -+ * `upload-pack` sends "ACK obj-id" on the first common object it finds.
    ++ * 'upload-pack' sends "ACK obj-id" on the first common object it finds.
         After that it says nothing until the client gives it a "done".
      
     - * upload-pack sends "NAK" on a flush-pkt if no common object
    -+ * `upload-pack` sends "NAK" on a flush-pkt if no common object
    ++ * 'upload-pack' sends "NAK" on a flush-pkt if no common object
         has been found yet.  If one has been found, and thus an ACK
         was already sent, it's silent on the flush-pkt.
      
-- 
2.43.0

[GSoC PATCH v2 1/3] doc: gitprotocol-pack: fix pronoun-antecedent agreement

[LorenzoPegorari]

Fix "pronoun-antecedent agreement" errors.

Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
---
 Documentation/gitprotocol-pack.adoc | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
index 837b691c89..9952fac188 100644
--- a/Documentation/gitprotocol-pack.adoc
+++ b/Documentation/gitprotocol-pack.adoc
@@ -65,7 +65,7 @@ Extra Parameters
 ----------------
 
 The protocol provides a mechanism in which clients can send additional
-information in its first message to the server. These are called "Extra
+information in their first message to the server. These are called "Extra
 Parameters", and are supported by the Git, SSH, and HTTP protocols.
 
 Each Extra Parameter takes the form of `<key>=<value>` or `<key>`.
@@ -277,7 +277,7 @@ out of what the server said it could do with the first 'want' line.
   filter-request    =  PKT-LINE("filter" SP filter-spec)
 ----
 
-Clients MUST send all the obj-ids it wants from the reference
+Clients MUST send all the obj-ids they want from the reference
 discovery phase as 'want' lines. Clients MUST send at least one
 'want' command in the request body. Clients MUST NOT mention an
 obj-id in a 'want' command which did not appear in the response
-- 
2.43.0

[GSoC PATCH v2 2/3] doc: gitprotocol-pack: improve paragraphs structure

[LorenzoPegorari]

Logically separate the introductory sentence from the first transport
description to improve readability and structural clarity.

Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
---
 Documentation/gitprotocol-pack.adoc | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
index 9952fac188..f4c9e024b0 100644
--- a/Documentation/gitprotocol-pack.adoc
+++ b/Documentation/gitprotocol-pack.adoc
@@ -47,7 +47,9 @@ process defined in this protocol is terminated.
 Transports
 ----------
 There are three transports over which the packfile protocol is
-initiated.  The Git transport is a simple, unauthenticated server that
+initiated.
+
+The Git transport is a simple, unauthenticated server that
 takes the command (almost always 'upload-pack', though Git
 servers can be configured to be globally writable, in which 'receive-
 pack' initiation is also allowed) with which the client wishes to
-- 
2.43.0

[GSoC PATCH v2 3/3] doc: gitprotocol-pack: normalize italic formatting

[LorenzoPegorari]

Uniform italic style usage for command and process names.

Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
---
 Documentation/gitprotocol-pack.adoc | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
index f4c9e024b0..7ed591a0bd 100644
--- a/Documentation/gitprotocol-pack.adoc
+++ b/Documentation/gitprotocol-pack.adoc
@@ -117,7 +117,7 @@ process on the server side over the Git protocol is this:
 SSH Transport
 -------------
 
-Initiating the upload-pack or receive-pack processes over SSH is
+Initiating the 'upload-pack' or 'receive-pack' processes over SSH is
 executing the binary on the server via SSH remote execution.
 It is basically equivalent to running this:
 
@@ -131,7 +131,7 @@ two commands, or even just one of them.
 
 In an ssh:// format URI, it's absolute in the URI, so the '/' after
 the host name (or port number) is sent as an argument, which is then
-read by the remote git-upload-pack exactly as is, so it's effectively
+read by the remote `git-upload-pack` exactly as is, so it's effectively
 an absolute path in the remote filesystem.
 
        git clone ssh://user@example.com/project.git
@@ -163,7 +163,7 @@ supports passing environment variables as an argument.
 
 A few things to remember here:
 
-- The "command name" is spelled with dash (e.g. git-upload-pack), but
+- The "command name" is spelled with dash (e.g. 'git-upload-pack'), but
   this can be overridden by the client;
 
 - The repository path is always quoted with single quotes.
@@ -377,10 +377,10 @@ In multi_ack_detailed mode:
 
 Without either multi_ack or multi_ack_detailed:
 
- * upload-pack sends "ACK obj-id" on the first common object it finds.
+ * 'upload-pack' sends "ACK obj-id" on the first common object it finds.
    After that it says nothing until the client gives it a "done".
 
- * upload-pack sends "NAK" on a flush-pkt if no common object
+ * 'upload-pack' sends "NAK" on a flush-pkt if no common object
    has been found yet.  If one has been found, and thus an ACK
    was already sent, it's silent on the flush-pkt.
 
-- 
2.43.0

[GSoC PATCH v3 0/3] doc: improve gitprotocol-pack

[LorenzoPegorari]

While studying the `gitprotocol-pack` documentation, I found various
small style inconsistencies.

These patches are just tiny, simple improvements, mostly to improve the
clarity of the documentation.

V3 DIFF:
 * Fixed final patch to properly conform command and process names to
   italic format, instead of the inline code format
 * Fixed typo that I forgot to change in v2

LorenzoPegorari (3):
  doc: gitprotocol-pack: fix pronoun-antecedent agreement
  doc: gitprotocol-pack: improve paragraphs structure
  doc: gitprotocol-pack: normalize italic formatting

 Documentation/gitprotocol-pack.adoc | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

Range-diff against v2:
1:  0d679e5eb5 = 1:  0d679e5eb5 doc: gitprotocol-pack: fix pronoun-antecedent agreement
2:  8a6b5d4c98 = 2:  8a6b5d4c98 doc: gitprotocol-pack: improve paragraphs structure
3:  6410967d65 ! 3:  2cf8a13eaf doc: gitprotocol-pack: normalize italic formatting
    @@ Documentation/gitprotocol-pack.adoc: two commands, or even just one of them.
      In an ssh:// format URI, it's absolute in the URI, so the '/' after
      the host name (or port number) is sent as an argument, which is then
     -read by the remote git-upload-pack exactly as is, so it's effectively
    -+read by the remote `git-upload-pack` exactly as is, so it's effectively
    ++read by the remote 'git-upload-pack' exactly as is, so it's effectively
      an absolute path in the remote filesystem.
      
             git clone ssh://user@example.com/project.git
-- 
2.43.0

[GSoC PATCH v3 1/3] doc: gitprotocol-pack: fix pronoun-antecedent agreement

[LorenzoPegorari]

Fix "pronoun-antecedent agreement" errors.

Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
---
 Documentation/gitprotocol-pack.adoc | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
index 837b691c89..9952fac188 100644
--- a/Documentation/gitprotocol-pack.adoc
+++ b/Documentation/gitprotocol-pack.adoc
@@ -65,7 +65,7 @@ Extra Parameters
 ----------------
 
 The protocol provides a mechanism in which clients can send additional
-information in its first message to the server. These are called "Extra
+information in their first message to the server. These are called "Extra
 Parameters", and are supported by the Git, SSH, and HTTP protocols.
 
 Each Extra Parameter takes the form of `<key>=<value>` or `<key>`.
@@ -277,7 +277,7 @@ out of what the server said it could do with the first 'want' line.
   filter-request    =  PKT-LINE("filter" SP filter-spec)
 ----
 
-Clients MUST send all the obj-ids it wants from the reference
+Clients MUST send all the obj-ids they want from the reference
 discovery phase as 'want' lines. Clients MUST send at least one
 'want' command in the request body. Clients MUST NOT mention an
 obj-id in a 'want' command which did not appear in the response
-- 
2.43.0

[GSoC PATCH v3 2/3] doc: gitprotocol-pack: improve paragraphs structure

[LorenzoPegorari]

Logically separate the introductory sentence from the first transport
description to improve readability and structural clarity.

Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
---
 Documentation/gitprotocol-pack.adoc | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
index 9952fac188..f4c9e024b0 100644
--- a/Documentation/gitprotocol-pack.adoc
+++ b/Documentation/gitprotocol-pack.adoc
@@ -47,7 +47,9 @@ process defined in this protocol is terminated.
 Transports
 ----------
 There are three transports over which the packfile protocol is
-initiated.  The Git transport is a simple, unauthenticated server that
+initiated.
+
+The Git transport is a simple, unauthenticated server that
 takes the command (almost always 'upload-pack', though Git
 servers can be configured to be globally writable, in which 'receive-
 pack' initiation is also allowed) with which the client wishes to
-- 
2.43.0

[GSoC PATCH v3 3/3] doc: gitprotocol-pack: normalize italic formatting

[LorenzoPegorari]

Uniform italic style usage for command and process names.

Signed-off-by: LorenzoPegorari <lorenzo.pegorari2002@gmail.com>
---
 Documentation/gitprotocol-pack.adoc | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/gitprotocol-pack.adoc b/Documentation/gitprotocol-pack.adoc
index f4c9e024b0..633deecf2d 100644
--- a/Documentation/gitprotocol-pack.adoc
+++ b/Documentation/gitprotocol-pack.adoc
@@ -117,7 +117,7 @@ process on the server side over the Git protocol is this:
 SSH Transport
 -------------
 
-Initiating the upload-pack or receive-pack processes over SSH is
+Initiating the 'upload-pack' or 'receive-pack' processes over SSH is
 executing the binary on the server via SSH remote execution.
 It is basically equivalent to running this:
 
@@ -131,7 +131,7 @@ two commands, or even just one of them.
 
 In an ssh:// format URI, it's absolute in the URI, so the '/' after
 the host name (or port number) is sent as an argument, which is then
-read by the remote git-upload-pack exactly as is, so it's effectively
+read by the remote 'git-upload-pack' exactly as is, so it's effectively
 an absolute path in the remote filesystem.
 
        git clone ssh://user@example.com/project.git
@@ -163,7 +163,7 @@ supports passing environment variables as an argument.
 
 A few things to remember here:
 
-- The "command name" is spelled with dash (e.g. git-upload-pack), but
+- The "command name" is spelled with dash (e.g. 'git-upload-pack'), but
   this can be overridden by the client;
 
 - The repository path is always quoted with single quotes.
@@ -377,10 +377,10 @@ In multi_ack_detailed mode:
 
 Without either multi_ack or multi_ack_detailed:
 
- * upload-pack sends "ACK obj-id" on the first common object it finds.
+ * 'upload-pack' sends "ACK obj-id" on the first common object it finds.
    After that it says nothing until the client gives it a "done".
 
- * upload-pack sends "NAK" on a flush-pkt if no common object
+ * 'upload-pack' sends "NAK" on a flush-pkt if no common object
    has been found yet.  If one has been found, and thus an ACK
    was already sent, it's silent on the flush-pkt.
 
-- 
2.43.0