From: Phillip Wood <phillip.wood123@gmail.com>
To: Dragan Simic <dsimic@manjaro.org>,
Peter Hutterer <peter.hutterer@who-t.net>
Cc: git@vger.kernel.org, Junio C Hamano <gitster@pobox.com>,
David Heidelberg <david@ixit.cz>
Subject: Re: [PATCH v3] diff: add diff.srcPrefix and diff.dstPrefix configuration variables
Date: Wed, 13 Mar 2024 15:06:23 +0000 [thread overview]
Message-ID: <d15eb4b0-2ea9-44d7-af5a-2ea1162294f4@gmail.com> (raw)
In-Reply-To: <fac4fec23597bff0f4594112d2a9976d@manjaro.org>
On 13/03/2024 02:15, Dragan Simic wrote:
> Hello Peter,
>
> On 2024-03-13 00:15, Peter Hutterer wrote:
>> Allow the default prefixes "a/" and "b/" to be tweaked by the
>> diff.srcprefix and diff.dstprefix configuration variables.
>
> The only thing that's left is to update the patch description
> to use camel case. :)
If that's the only change that's required I don't think we should be
asking for a re-roll. We do place a high value on good commit messages
in this project but I don't think it is reasonable to require a re-roll
for a purely aesthetic change.
Best Wishes
Phillip
>> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
>> ---
>> Changes to v2;
>> - doc: change to camelcase diff.srcPrefix/diff.dstPrefix for
>> consistency with diff.mnemonicPrefix and most other options
>> - git diff --default-prefix forces a/ and b/ regardless of configured
>> prefix, see the 'diff_opt_default_prefix' hunk in the patch below.
>>
>> The latter may be slightly controversial but: there are scripts out
>> there that rely on the a/ and b/ prefix (came across one last night).
>> With a custom prefix those scripts will break, having an option that
>> forces the a/ and b/ prefix helps. Plus the man page explicitly says:
>> Use the default source and destination prefixes ("a/" and "b/").
>> So let's stick with that behaviour then.
>>
>> Documentation/config/diff.txt | 6 ++++++
>> diff.c | 14 ++++++++++++--
>> t/t4013-diff-various.sh | 35 +++++++++++++++++++++++++++++++++++
>> 3 files changed, 53 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/config/diff.txt
>> b/Documentation/config/diff.txt
>> index 6c7e09a1ef5e..afc23d7723b6 100644
>> --- a/Documentation/config/diff.txt
>> +++ b/Documentation/config/diff.txt
>> @@ -111,6 +111,12 @@ diff.mnemonicPrefix::
>> diff.noprefix::
>> If set, 'git diff' does not show any source or destination prefix.
>>
>> +diff.srcPrefix::
>> + If set, 'git diff' uses this source prefix. Defaults to 'a/'.
>> +
>> +diff.dstPrefix::
>> + If set, 'git diff' uses this destination prefix. Defaults to 'b/'.
>> +
>> diff.relative::
>> If set to 'true', 'git diff' does not show changes outside of the
>> directory
>> and show pathnames relative to the current directory.
>> diff --git a/diff.c b/diff.c
>> index e50def45383e..108c1875775d 100644
>> --- a/diff.c
>> +++ b/diff.c
>> @@ -62,6 +62,8 @@ static const char *diff_order_file_cfg;
>> int diff_auto_refresh_index = 1;
>> static int diff_mnemonic_prefix;
>> static int diff_no_prefix;
>> +static const char *diff_src_prefix = "a/";
>> +static const char *diff_dst_prefix = "b/";
>> static int diff_relative;
>> static int diff_stat_name_width;
>> static int diff_stat_graph_width;
>> @@ -408,6 +410,12 @@ int git_diff_ui_config(const char *var, const
>> char *value,
>> diff_no_prefix = git_config_bool(var, value);
>> return 0;
>> }
>> + if (!strcmp(var, "diff.srcprefix")) {
>> + return git_config_string(&diff_src_prefix, var, value);
>> + }
>> + if (!strcmp(var, "diff.dstprefix")) {
>> + return git_config_string(&diff_dst_prefix, var, value);
>> + }
>> if (!strcmp(var, "diff.relative")) {
>> diff_relative = git_config_bool(var, value);
>> return 0;
>> @@ -3425,8 +3433,8 @@ void diff_set_noprefix(struct diff_options
>> *options)
>>
>> void diff_set_default_prefix(struct diff_options *options)
>> {
>> - options->a_prefix = "a/";
>> - options->b_prefix = "b/";
>> + options->a_prefix = diff_src_prefix;
>> + options->b_prefix = diff_dst_prefix;
>> }
>>
>> struct userdiff_driver *get_textconv(struct repository *r,
>> @@ -5362,6 +5370,8 @@ static int diff_opt_default_prefix(const struct
>> option *opt,
>>
>> BUG_ON_OPT_NEG(unset);
>> BUG_ON_OPT_ARG(optarg);
>> + diff_src_prefix = "a/";
>> + diff_dst_prefix = "b/";
>> diff_set_default_prefix(options);
>> return 0;
>> }
>> diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh
>> index 1e3b2dbea484..e75f9f7d4cb2 100755
>> --- a/t/t4013-diff-various.sh
>> +++ b/t/t4013-diff-various.sh
>> @@ -663,6 +663,41 @@ test_expect_success 'diff --default-prefix
>> overrides diff.mnemonicprefix' '
>> check_prefix actual a/file0 b/file0
>> '
>>
>> +test_expect_success 'diff respects diff.srcprefix' '
>> + git -c diff.srcprefix=x/ diff >actual &&
>> + check_prefix actual x/file0 b/file0
>> +'
>> +
>> +test_expect_success 'diff respects diff.dstprefix' '
>> + git -c diff.dstprefix=y/ diff >actual &&
>> + check_prefix actual a/file0 y/file0
>> +'
>> +
>> +test_expect_success 'diff --src-prefix overrides diff.srcprefix' '
>> + git -c diff.srcprefix=z/ diff --src-prefix=z/ >actual &&
>> + check_prefix actual z/file0 b/file0
>> +'
>> +
>> +test_expect_success 'diff --dst-prefix overrides diff.dstprefix' '
>> + git -c diff.dstprefix=y/ diff --dst-prefix=z/ >actual &&
>> + check_prefix actual a/file0 z/file0
>> +'
>> +
>> +test_expect_success 'diff src/dstprefix ignored with diff.noprefix' '
>> + git -c diff.dstprefix=y/ -c diff.srcprefix=x/ -c diff.noprefix
>> diff >actual &&
>> + check_prefix actual file0 file0
>> +'
>> +
>> +test_expect_success 'diff src/dstprefix ignored with
>> diff.mnemonicprefix' '
>> + git -c diff.dstprefix=x/ -c diff.srcprefix=y/ -c diff.mnemonicprefix
>> diff >actual &&
>> + check_prefix actual i/file0 w/file0
>> +'
>> +
>> +test_expect_success 'diff src/dstprefix ignored with --default-prefix' '
>> + git -c diff.dstprefix=x/ -c diff.srcprefix=y/ diff
>> --default-prefix >actual &&
>> + check_prefix actual a/file0 b/file0
>> +'
>> +
>> test_expect_success 'diff --no-renames cannot be abbreviated' '
>> test_expect_code 129 git diff --no-rename >actual 2>error &&
>> test_must_be_empty actual &&
>
next prev parent reply other threads:[~2024-03-13 15:06 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-11 2:32 [PATCH] diff: add diff.srcprefix and diff.dstprefix option support Peter Hutterer
2024-03-11 18:06 ` Junio C Hamano
2024-03-12 0:57 ` [PATCH v2] diff: add diff.srcprefix and diff.dstprefix configuration variables Peter Hutterer
2024-03-12 19:23 ` Junio C Hamano
2024-03-12 19:29 ` Dragan Simic
2024-03-12 23:15 ` [PATCH v3] diff: add diff.srcPrefix and diff.dstPrefix " Peter Hutterer
2024-03-13 2:15 ` Dragan Simic
2024-03-13 3:26 ` Dragan Simic
2024-03-13 15:06 ` Phillip Wood [this message]
2024-03-13 15:14 ` Dragan Simic
2024-03-13 15:24 ` Junio C Hamano
2024-03-13 15:28 ` Dragan Simic
2024-03-13 15:04 ` Phillip Wood
2024-03-13 15:29 ` Junio C Hamano
2024-03-13 16:18 ` Phillip Wood
2024-03-13 17:55 ` Junio C Hamano
2024-03-14 5:06 ` Peter Hutterer
2024-03-13 20:23 ` Dragan Simic
2024-03-15 1:03 ` [PATCH v4] " Peter Hutterer
2024-03-15 3:53 ` Dragan Simic
2024-03-15 5:54 ` [PATCH v5] " Peter Hutterer
2024-03-15 6:02 ` Dragan Simic
2024-03-15 17:00 ` Junio C Hamano
2024-03-15 19:13 ` Dragan Simic
2024-03-16 5:57 ` Junio C Hamano
2024-03-16 6:41 ` Dragan Simic
2024-03-18 3:49 ` Peter Hutterer
2024-03-18 4:39 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d15eb4b0-2ea9-44d7-af5a-2ea1162294f4@gmail.com \
--to=phillip.wood123@gmail.com \
--cc=david@ixit.cz \
--cc=dsimic@manjaro.org \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=peter.hutterer@who-t.net \
--cc=phillip.wood@dunelm.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).