* Trouble with 'make prefix=/usr info'
@ 2009-12-22 15:50 Craig Moore
2009-12-22 15:58 ` Michael J Gruber
0 siblings, 1 reply; 6+ messages in thread
From: Craig Moore @ 2009-12-22 15:50 UTC (permalink / raw)
To: git
Hi,
I'm getting the following error when I make the info target:
$ make prefix=/usr info
make -C Documentation info
make[1]: Entering directory `/local/software/git-1.6.5.7/Documentation'
make[2]: Entering directory `/local/software/git-1.6.5.7'
make[2]: `GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory `/local/software/git-1.6.5.7'
DB2TEXI user-manual.texi
Usage: jw [<options>] <sgml_file>
where <options> are:
-f|--frontend <frontend>: Specify the frontend (source format)
(default is docbook)
-b|--backend <backend>: Specify the backend (destination format)
(default is html)
-c|--cat <file>: Specify an extra SGML open catalog
-n|--nostd: Do not use the standard SGML open catalogs
-d|--dsl <file>|default|none: Specify an alternate style sheet
(default is to use the default stylesheet)
-l|--dcl <file>: Specify an alternate SGML declaration
(usual ones like xml.dcl get detected
automatically)
-s|--sgmlbase <path>: Change base directory for SGML distribution
(usually /usr/share/sgml)
-p|--parser <program>: Specify the parser if several are installed
(jade or openjade)
-o|--output <directory>: Set output directory
-u|--nochunks: Output only one big file
(overrides the stylesheet settings)
-i|--include <section>: Specify a SGML marked section to include
(should be marked as "ignore" in the SGML text)
-w|--warning <warning_type>|list: Control warnings or display the allowed
warning types
-e|--errors <error_type>|list: Control errors or display the allowed error types
-h|--help: Print this help message and exit
-V <variable[=value]>: Set a variable
-v|--version: Print the version and exit
make[1]: *** [user-manual.texi] Error 1
make[1]: Leaving directory `/local/software/git-1.6.5.7/Documentation'
make: *** [info] Error 2
I can see that the error is likely related to the fact that it enters the
Documentation directing, then exits the Documentation directory, and then tries
to build the user-manual.texi file in the root directory (however, that file is
in the Documentation directory, which it just left). I've tried to track down
and change where it exits the Documentation directory, but I've had no success.
I would appreciate any recommendations you might have. I've already been able to
install git, but I couldn't install the 'info' target because of this error.
Thanks,
Craig
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Trouble with 'make prefix=/usr info' 2009-12-22 15:50 Trouble with 'make prefix=/usr info' Craig Moore @ 2009-12-22 15:58 ` Michael J Gruber 2009-12-22 16:14 ` Craig Moore 0 siblings, 1 reply; 6+ messages in thread From: Michael J Gruber @ 2009-12-22 15:58 UTC (permalink / raw) To: Craig Moore; +Cc: git Craig Moore venit, vidit, dixit 22.12.2009 16:50: > Hi, > > I'm getting the following error when I make the info target: > > $ make prefix=/usr info > make -C Documentation info > make[1]: Entering directory `/local/software/git-1.6.5.7/Documentation' > make[2]: Entering directory `/local/software/git-1.6.5.7' > make[2]: `GIT-VERSION-FILE' is up to date. > make[2]: Leaving directory `/local/software/git-1.6.5.7' > DB2TEXI user-manual.texi > Usage: jw [<options>] <sgml_file> > where <options> are: > -f|--frontend <frontend>: Specify the frontend (source format) > (default is docbook) > -b|--backend <backend>: Specify the backend (destination format) > (default is html) > -c|--cat <file>: Specify an extra SGML open catalog > -n|--nostd: Do not use the standard SGML open catalogs > -d|--dsl <file>|default|none: Specify an alternate style sheet > (default is to use the default stylesheet) > -l|--dcl <file>: Specify an alternate SGML declaration > (usual ones like xml.dcl get detected > automatically) > -s|--sgmlbase <path>: Change base directory for SGML distribution > (usually /usr/share/sgml) > -p|--parser <program>: Specify the parser if several are installed > (jade or openjade) > -o|--output <directory>: Set output directory > -u|--nochunks: Output only one big file > (overrides the stylesheet settings) > -i|--include <section>: Specify a SGML marked section to include > (should be marked as "ignore" in the SGML text) > -w|--warning <warning_type>|list: Control warnings or display the allowed > warning types > -e|--errors <error_type>|list: Control errors or display the allowed error types > -h|--help: Print this help message and exit > -V <variable[=value]>: Set a variable > -v|--version: Print the version and exit > make[1]: *** [user-manual.texi] Error 1 > make[1]: Leaving directory `/local/software/git-1.6.5.7/Documentation' > make: *** [info] Error 2 > > I can see that the error is likely related to the fact that it enters the > Documentation directing, then exits the Documentation directory, and then tries > to build the user-manual.texi file in the root directory (however, that file is > in the Documentation directory, which it just left). I've tried to track down > and change where it exits the Documentation directory, but I've had no success. > > I would appreciate any recommendations you might have. I've already been able to > install git, but I couldn't install the 'info' target because of this error. Does it work without prefix? Also, you may want to cd into Documentation and try to make there. Michael ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Trouble with 'make prefix=/usr info' 2009-12-22 15:58 ` Michael J Gruber @ 2009-12-22 16:14 ` Craig Moore 2009-12-22 17:22 ` Michael J Gruber 0 siblings, 1 reply; 6+ messages in thread From: Craig Moore @ 2009-12-22 16:14 UTC (permalink / raw) To: git 2009/12/22 Michael J Gruber <git@drmicha.warpmail.net>: > Craig Moore venit, vidit, dixit 22.12.2009 16:50: >> Hi, >> >> I'm getting the following error when I make the info target: >> >> $ make prefix=/usr info >> make -C Documentation info >> make[1]: Entering directory `/local/software/git-1.6.5.7/Documentation' >> make[2]: Entering directory `/local/software/git-1.6.5.7' >> make[2]: `GIT-VERSION-FILE' is up to date. >> make[2]: Leaving directory `/local/software/git-1.6.5.7' >> DB2TEXI user-manual.texi >> Usage: jw [<options>] <sgml_file> >> where <options> are: >> -f|--frontend <frontend>: Specify the frontend (source format) >> (default is docbook) >> -b|--backend <backend>: Specify the backend (destination format) >> (default is html) >> -c|--cat <file>: Specify an extra SGML open catalog >> -n|--nostd: Do not use the standard SGML open catalogs >> -d|--dsl <file>|default|none: Specify an alternate style sheet >> (default is to use the default stylesheet) >> -l|--dcl <file>: Specify an alternate SGML declaration >> (usual ones like xml.dcl get detected >> automatically) >> -s|--sgmlbase <path>: Change base directory for SGML distribution >> (usually /usr/share/sgml) >> -p|--parser <program>: Specify the parser if several are installed >> (jade or openjade) >> -o|--output <directory>: Set output directory >> -u|--nochunks: Output only one big file >> (overrides the stylesheet settings) >> -i|--include <section>: Specify a SGML marked section to include >> (should be marked as "ignore" in the SGML text) >> -w|--warning <warning_type>|list: Control warnings or display the allowed >> warning types >> -e|--errors <error_type>|list: Control errors or display the allowed error types >> -h|--help: Print this help message and exit >> -V <variable[=value]>: Set a variable >> -v|--version: Print the version and exit >> make[1]: *** [user-manual.texi] Error 1 >> make[1]: Leaving directory `/local/software/git-1.6.5.7/Documentation' >> make: *** [info] Error 2 >> >> I can see that the error is likely related to the fact that it enters the >> Documentation directing, then exits the Documentation directory, and then tries >> to build the user-manual.texi file in the root directory (however, that file is >> in the Documentation directory, which it just left). I've tried to track down >> and change where it exits the Documentation directory, but I've had no success. >> >> I would appreciate any recommendations you might have. I've already been able to >> install git, but I couldn't install the 'info' target because of this error. > > Does it work without prefix? > Also, you may want to cd into Documentation and try to make there. > > Michael > > Hey Michael, Here is what happens when I run it inside the Documentation directory (without the prefix): user@server: /local/software/git-1.6.5.7/Documentation $ make info SUBDIR ../ make[1]: `GIT-VERSION-FILE' is up to date. DB2TEXI user-manual.texi Usage: jw [<options>] <sgml_file> where <options> are: -f|--frontend <frontend>: Specify the frontend (source format) (default is docbook) -b|--backend <backend>: Specify the backend (destination format) (default is html) -c|--cat <file>: Specify an extra SGML open catalog -n|--nostd: Do not use the standard SGML open catalogs -d|--dsl <file>|default|none: Specify an alternate style sheet (default is to use the default stylesheet) -l|--dcl <file>: Specify an alternate SGML declaration (usual ones like xml.dcl get detected automatically) -s|--sgmlbase <path>: Change base directory for SGML distribution (usually /usr/share/sgml) -p|--parser <program>: Specify the parser if several are installed (jade or openjade) -o|--output <directory>: Set output directory -u|--nochunks: Output only one big file (overrides the stylesheet settings) -i|--include <section>: Specify a SGML marked section to include (should be marked as "ignore" in the SGML text) -w|--warning <warning_type>|list: Control warnings or display the allowed warning types -e|--errors <error_type>|list: Control errors or display the allowed error types -h|--help: Print this help message and exit -V <variable[=value]>: Set a variable -v|--version: Print the version and exit make: *** [user-manual.texi] Error 1 The first thing it does is go to the directory above, weird. Craig ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Trouble with 'make prefix=/usr info' 2009-12-22 16:14 ` Craig Moore @ 2009-12-22 17:22 ` Michael J Gruber 2010-01-06 12:32 ` Craig Moore 0 siblings, 1 reply; 6+ messages in thread From: Michael J Gruber @ 2009-12-22 17:22 UTC (permalink / raw) To: Craig Moore; +Cc: git Craig Moore venit, vidit, dixit 22.12.2009 17:14: > 2009/12/22 Michael J Gruber <git@drmicha.warpmail.net>: >> Craig Moore venit, vidit, dixit 22.12.2009 16:50: >>> Hi, >>> >>> I'm getting the following error when I make the info target: >>> >>> $ make prefix=/usr info >>> make -C Documentation info >>> make[1]: Entering directory `/local/software/git-1.6.5.7/Documentation' >>> make[2]: Entering directory `/local/software/git-1.6.5.7' >>> make[2]: `GIT-VERSION-FILE' is up to date. >>> make[2]: Leaving directory `/local/software/git-1.6.5.7' >>> DB2TEXI user-manual.texi >>> Usage: jw [<options>] <sgml_file> >>> where <options> are: >>> -f|--frontend <frontend>: Specify the frontend (source format) >>> (default is docbook) >>> -b|--backend <backend>: Specify the backend (destination format) >>> (default is html) >>> -c|--cat <file>: Specify an extra SGML open catalog >>> -n|--nostd: Do not use the standard SGML open catalogs >>> -d|--dsl <file>|default|none: Specify an alternate style sheet >>> (default is to use the default stylesheet) >>> -l|--dcl <file>: Specify an alternate SGML declaration >>> (usual ones like xml.dcl get detected >>> automatically) >>> -s|--sgmlbase <path>: Change base directory for SGML distribution >>> (usually /usr/share/sgml) >>> -p|--parser <program>: Specify the parser if several are installed >>> (jade or openjade) >>> -o|--output <directory>: Set output directory >>> -u|--nochunks: Output only one big file >>> (overrides the stylesheet settings) >>> -i|--include <section>: Specify a SGML marked section to include >>> (should be marked as "ignore" in the SGML text) >>> -w|--warning <warning_type>|list: Control warnings or display the allowed >>> warning types >>> -e|--errors <error_type>|list: Control errors or display the allowed error types >>> -h|--help: Print this help message and exit >>> -V <variable[=value]>: Set a variable >>> -v|--version: Print the version and exit >>> make[1]: *** [user-manual.texi] Error 1 >>> make[1]: Leaving directory `/local/software/git-1.6.5.7/Documentation' >>> make: *** [info] Error 2 >>> >>> I can see that the error is likely related to the fact that it enters the >>> Documentation directing, then exits the Documentation directory, and then tries >>> to build the user-manual.texi file in the root directory (however, that file is >>> in the Documentation directory, which it just left). I've tried to track down >>> and change where it exits the Documentation directory, but I've had no success. >>> >>> I would appreciate any recommendations you might have. I've already been able to >>> install git, but I couldn't install the 'info' target because of this error. >> >> Does it work without prefix? >> Also, you may want to cd into Documentation and try to make there. >> >> Michael >> >> > > Hey Michael, > > Here is what happens when I run it inside the Documentation directory > (without the prefix): > > user@server: /local/software/git-1.6.5.7/Documentation > $ make info > SUBDIR ../ > make[1]: `GIT-VERSION-FILE' is up to date. > DB2TEXI user-manual.texi > Usage: jw [<options>] <sgml_file> > where <options> are: > -f|--frontend <frontend>: Specify the frontend (source format) > (default is docbook) > -b|--backend <backend>: Specify the backend (destination format) > (default is html) > -c|--cat <file>: Specify an extra SGML open catalog > -n|--nostd: Do not use the standard SGML open catalogs > -d|--dsl <file>|default|none: Specify an alternate style sheet > (default is to use the default stylesheet) > -l|--dcl <file>: Specify an alternate SGML declaration > (usual ones like xml.dcl get detected > automatically) > -s|--sgmlbase <path>: Change base directory for SGML distribution > (usually /usr/share/sgml) > -p|--parser <program>: Specify the parser if several are installed > (jade or openjade) > -o|--output <directory>: Set output directory > -u|--nochunks: Output only one big file > (overrides the stylesheet settings) > -i|--include <section>: Specify a SGML marked section to include > (should be marked as "ignore" in the SGML text) > -w|--warning <warning_type>|list: Control warnings or display the > allowed warning types > -e|--errors <error_type>|list: Control errors or display the allowed > error types > -h|--help: Print this help message and exit > -V <variable[=value]>: Set a variable > -v|--version: Print the version and exit > make: *** [user-manual.texi] Error 1 > > The first thing it does is go to the directory above, weird. > > Craig I think it only looks like that. SUBDIR processing is finished at that point, and the DB2TEXI line is where user-manual.texi is actually being processed, and that's what's causing the error. Did you set the texinfo processor in the Makefile or using variables? V=1 make info will show you the exact commands being executed. Michael ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Trouble with 'make prefix=/usr info' 2009-12-22 17:22 ` Michael J Gruber @ 2010-01-06 12:32 ` Craig Moore 2010-01-08 21:14 ` Chris Johnsen 0 siblings, 1 reply; 6+ messages in thread From: Craig Moore @ 2010-01-06 12:32 UTC (permalink / raw) To: Michael J Gruber; +Cc: git 2009/12/22 Michael J Gruber <git@drmicha.warpmail.net>: > Craig Moore venit, vidit, dixit 22.12.2009 17:14: >> 2009/12/22 Michael J Gruber <git@drmicha.warpmail.net>: >>> Craig Moore venit, vidit, dixit 22.12.2009 16:50: >>>> Hi, >>>> >>>> I'm getting the following error when I make the info target: >>>> >>>> $ make prefix=/usr info >>>> make -C Documentation info >>>> make[1]: Entering directory `/local/software/git-1.6.5.7/Documentation' >>>> make[2]: Entering directory `/local/software/git-1.6.5.7' >>>> make[2]: `GIT-VERSION-FILE' is up to date. >>>> make[2]: Leaving directory `/local/software/git-1.6.5.7' >>>> DB2TEXI user-manual.texi >>>> Usage: jw [<options>] <sgml_file> >>>> where <options> are: >>>> -f|--frontend <frontend>: Specify the frontend (source format) >>>> (default is docbook) >>>> -b|--backend <backend>: Specify the backend (destination format) >>>> (default is html) >>>> -c|--cat <file>: Specify an extra SGML open catalog >>>> -n|--nostd: Do not use the standard SGML open catalogs >>>> -d|--dsl <file>|default|none: Specify an alternate style sheet >>>> (default is to use the default stylesheet) >>>> -l|--dcl <file>: Specify an alternate SGML declaration >>>> (usual ones like xml.dcl get detected >>>> automatically) >>>> -s|--sgmlbase <path>: Change base directory for SGML distribution >>>> (usually /usr/share/sgml) >>>> -p|--parser <program>: Specify the parser if several are installed >>>> (jade or openjade) >>>> -o|--output <directory>: Set output directory >>>> -u|--nochunks: Output only one big file >>>> (overrides the stylesheet settings) >>>> -i|--include <section>: Specify a SGML marked section to include >>>> (should be marked as "ignore" in the SGML text) >>>> -w|--warning <warning_type>|list: Control warnings or display the allowed >>>> warning types >>>> -e|--errors <error_type>|list: Control errors or display the allowed error types >>>> -h|--help: Print this help message and exit >>>> -V <variable[=value]>: Set a variable >>>> -v|--version: Print the version and exit >>>> make[1]: *** [user-manual.texi] Error 1 >>>> make[1]: Leaving directory `/local/software/git-1.6.5.7/Documentation' >>>> make: *** [info] Error 2 >>>> >>>> I can see that the error is likely related to the fact that it enters the >>>> Documentation directing, then exits the Documentation directory, and then tries >>>> to build the user-manual.texi file in the root directory (however, that file is >>>> in the Documentation directory, which it just left). I've tried to track down >>>> and change where it exits the Documentation directory, but I've had no success. >>>> >>>> I would appreciate any recommendations you might have. I've already been able to >>>> install git, but I couldn't install the 'info' target because of this error. >>> >>> Does it work without prefix? >>> Also, you may want to cd into Documentation and try to make there. >>> >>> Michael >>> >>> >> >> Hey Michael, >> >> Here is what happens when I run it inside the Documentation directory >> (without the prefix): >> >> user@server: /local/software/git-1.6.5.7/Documentation >> $ make info >> SUBDIR ../ >> make[1]: `GIT-VERSION-FILE' is up to date. >> DB2TEXI user-manual.texi >> Usage: jw [<options>] <sgml_file> >> where <options> are: >> -f|--frontend <frontend>: Specify the frontend (source format) >> (default is docbook) >> -b|--backend <backend>: Specify the backend (destination format) >> (default is html) >> -c|--cat <file>: Specify an extra SGML open catalog >> -n|--nostd: Do not use the standard SGML open catalogs >> -d|--dsl <file>|default|none: Specify an alternate style sheet >> (default is to use the default stylesheet) >> -l|--dcl <file>: Specify an alternate SGML declaration >> (usual ones like xml.dcl get detected >> automatically) >> -s|--sgmlbase <path>: Change base directory for SGML distribution >> (usually /usr/share/sgml) >> -p|--parser <program>: Specify the parser if several are installed >> (jade or openjade) >> -o|--output <directory>: Set output directory >> -u|--nochunks: Output only one big file >> (overrides the stylesheet settings) >> -i|--include <section>: Specify a SGML marked section to include >> (should be marked as "ignore" in the SGML text) >> -w|--warning <warning_type>|list: Control warnings or display the >> allowed warning types >> -e|--errors <error_type>|list: Control errors or display the allowed >> error types >> -h|--help: Print this help message and exit >> -V <variable[=value]>: Set a variable >> -v|--version: Print the version and exit >> make: *** [user-manual.texi] Error 1 >> >> The first thing it does is go to the directory above, weird. >> >> Craig > > I think it only looks like that. SUBDIR processing is finished at that > point, and the DB2TEXI line is where user-manual.texi is actually being > processed, and that's what's causing the error. Did you set the texinfo > processor in the Makefile or using variables? > > V=1 make info > > will show you the exact commands being executed. > > Michael > Michael, thanks for your reply, and happy 2010. I'm back in the office, and here's what is returned when I execute the command: ================================ $ V=1 make info make -C Documentation info make[1]: Entering directory `/local/software/git-1.6.5.7/Documentation' make -C ../ GIT-VERSION-FILE make[2]: Entering directory `/local/software/git-1.6.5.7' make[2]: `GIT-VERSION-FILE' is up to date. make[2]: Leaving directory `/local/software/git-1.6.5.7' rm -f user-manual.texi+ user-manual.texi && \ docbook2x-texi user-manual.xml --encoding=UTF-8 --to-stdout >user-manual.texi++ && \ /usr/bin/perl fix-texi.perl <user-manual.texi++ >user-manual.texi+ && \ rm user-manual.texi++ && \ mv user-manual.texi+ user-manual.texi Usage: jw [<options>] <sgml_file> where <options> are: -f|--frontend <frontend>: Specify the frontend (source format) (default is docbook) -b|--backend <backend>: Specify the backend (destination format) (default is html) -c|--cat <file>: Specify an extra SGML open catalog -n|--nostd: Do not use the standard SGML open catalogs -d|--dsl <file>|default|none: Specify an alternate style sheet (default is to use the default stylesheet) -l|--dcl <file>: Specify an alternate SGML declaration (usual ones like xml.dcl get detected automatically) -s|--sgmlbase <path>: Change base directory for SGML distribution (usually /usr/share/sgml) -p|--parser <program>: Specify the parser if several are installed (jade or openjade) -o|--output <directory>: Set output directory -u|--nochunks: Output only one big file (overrides the stylesheet settings) -i|--include <section>: Specify a SGML marked section to include (should be marked as "ignore" in the SGML text) -w|--warning <warning_type>|list: Control warnings or display the allowed warning types -e|--errors <error_type>|list: Control errors or display the allowed error types -h|--help: Print this help message and exit -V <variable[=value]>: Set a variable -v|--version: Print the version and exit make[1]: *** [user-manual.texi] Error 1 make[1]: Leaving directory `/local/software/git-1.6.5.7/Documentation' make: *** [info] Error 2 ================================ I've isolated the problem, and its coming from this command: ================================ $ docbook2x-texi user-manual.xml --encoding=UTF-8 --to-stdout >user-manual.texi++ Usage: jw [<options>] <sgml_file> where <options> are: -f|--frontend <frontend>: Specify the frontend (source format) (default is docbook) -b|--backend <backend>: Specify the backend (destination format) (default is html) -c|--cat <file>: Specify an extra SGML open catalog -n|--nostd: Do not use the standard SGML open catalogs -d|--dsl <file>|default|none: Specify an alternate style sheet (default is to use the default stylesheet) -l|--dcl <file>: Specify an alternate SGML declaration (usual ones like xml.dcl get detected automatically) -s|--sgmlbase <path>: Change base directory for SGML distribution (usually /usr/share/sgml) -p|--parser <program>: Specify the parser if several are installed (jade or openjade) -o|--output <directory>: Set output directory -u|--nochunks: Output only one big file (overrides the stylesheet settings) -i|--include <section>: Specify a SGML marked section to include (should be marked as "ignore" in the SGML text) -w|--warning <warning_type>|list: Control warnings or display the allowed warning types -e|--errors <error_type>|list: Control errors or display the allowed error types -h|--help: Print this help message and exit -V <variable[=value]>: Set a variable -v|--version: Print the version and exit $ docbook2x-texi --version DocBook-utils version 0.6.14 (jw version 1.1) ================================ As you can see, I'm using DocBook-utils version 0.6.14 (jw version 1.1), and it doesn't list '--encoding=UTF-8 --to-stdout' in its options list. I'm guessing I've got the wrong version or type installed? Is there another which I should be using? Thanks for your help, Craig ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Trouble with 'make prefix=/usr info' 2010-01-06 12:32 ` Craig Moore @ 2010-01-08 21:14 ` Chris Johnsen 0 siblings, 0 replies; 6+ messages in thread From: Chris Johnsen @ 2010-01-08 21:14 UTC (permalink / raw) To: Craig Moore; +Cc: Michael J Gruber, git On 2010 Jan 6, at 06:32, Craig Moore wrote: > I've isolated the problem, and its coming from this command: > > ================================ > $ docbook2x-texi user-manual.xml --encoding=UTF-8 --to-stdout >> user-manual.texi++ > Usage: jw [<options>] <sgml_file> > where <options> are: > -f|--frontend <frontend>: Specify the frontend (source format) > (default is docbook) > -b|--backend <backend>: Specify the backend (destination > format) > (default is html) > -c|--cat <file>: Specify an extra SGML open catalog > -n|--nostd: Do not use the standard SGML open > catalogs > -d|--dsl <file>|default|none: Specify an alternate style sheet > (default is to use the default > stylesheet) > -l|--dcl <file>: Specify an alternate SGML declaration > (usual ones like xml.dcl get detected > automatically) > -s|--sgmlbase <path>: Change base directory for SGML > distribution > (usually /usr/share/sgml) > -p|--parser <program>: Specify the parser if several are > installed > (jade or openjade) > -o|--output <directory>: Set output directory > -u|--nochunks: Output only one big file > (overrides the stylesheet settings) > -i|--include <section>: Specify a SGML marked section to > include > (should be marked as "ignore" in > the SGML text) > -w|--warning <warning_type>|list: Control warnings or display the > allowed warning types > -e|--errors <error_type>|list: Control errors or display the allowed > error types > -h|--help: Print this help message and exit > -V <variable[=value]>: Set a variable > -v|--version: Print the version and exit > > $ docbook2x-texi --version > DocBook-utils version 0.6.14 (jw version 1.1) > ================================ > > As you can see, I'm using DocBook-utils version 0.6.14 (jw version > 1.1), and it doesn't list '--encoding=UTF-8 --to-stdout' in its > options list. I'm guessing I've got the wrong version or type > installed? Is there another which I should be using? > > Thanks for your help, > Craig > I have previously used docbook2texi from docbook2X 0.8.8 by setting DOCBOOK2X_TEXI for 'make info'. <http://docbook2x.sourceforge.net/> It needed a non-released patch to understand the combination of "--to- stdout" and "--encoding=", though: <http://docbook2x.cvs.sourceforge.net/viewvc/docbook2x/docbook2X/ perl/db2x_texixml.pl?r1=1.49&r2=1.50> Alternatively, it is possible to work-around the failure of --stdout with a wrapper script, but the patch is easy enough to apply. -- Chris ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-01-08 21:15 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-12-22 15:50 Trouble with 'make prefix=/usr info' Craig Moore 2009-12-22 15:58 ` Michael J Gruber 2009-12-22 16:14 ` Craig Moore 2009-12-22 17:22 ` Michael J Gruber 2010-01-06 12:32 ` Craig Moore 2010-01-08 21:14 ` Chris Johnsen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).