* [PATCH 0/2] GIT, Git, git @ 2013-01-19 9:57 Thomas Ackermann 2013-01-19 9:59 ` [PATCH 1/2] Change old system name 'GIT' to 'Git' Thomas Ackermann 2013-01-19 22:31 ` [PATCH 0/2] GIT, Git, git Jonathan Nieder 0 siblings, 2 replies; 10+ messages in thread From: Thomas Ackermann @ 2013-01-19 9:57 UTC (permalink / raw) To: th.acker, git Git changed its 'official' system name from 'GIT' to 'Git' in v1.6.5.3 (as can be seen in the corresponding release note where 'GIT' was changed to 'Git' in the header line). Alas the documention uses 'GIT', 'Git' or even 'git' to refer to the Git system. So change every occurrence of 'GIT" and 'git' to 'Git' whenever Git as a system is referred to (but don't do this change in the release notes because they constitute a history orthogonal to the history versioned by Git). [PATCH 1/2] Change old system name 'GIT' to 'Git' [PATCH 2/2] Change 'git' to 'Git' whenever the whole system is referred to Documentation/CodingGuidelines | 14 +- Documentation/SubmittingPatches | 12 +- Documentation/asciidoc.conf | 2 +- Documentation/blame-options.txt | 4 +- Documentation/config.txt | 106 +++++------ Documentation/diff-config.txt | 2 +- Documentation/diff-options.txt | 4 +- Documentation/everyday.txt | 10 +- Documentation/git-apply.txt | 2 +- Documentation/git-archimport.txt | 14 +- Documentation/git-archive.txt | 2 +- Documentation/git-bisect-lk2009.txt | 22 +-- Documentation/git-bisect.txt | 4 +- Documentation/git-blame.txt | 2 +- Documentation/git-branch.txt | 2 +- Documentation/git-bundle.txt | 2 +- Documentation/git-check-ref-format.txt | 4 +- Documentation/git-checkout.txt | 4 +- Documentation/git-clean.txt | 6 +- Documentation/git-clone.txt | 12 +- Documentation/git-commit-tree.txt | 2 +- Documentation/git-commit.txt | 6 +- Documentation/git-credential-cache.txt | 4 +- Documentation/git-credential-store.txt | 6 +- Documentation/git-credential.txt | 6 +- Documentation/git-cvsexportcommit.txt | 6 +- Documentation/git-cvsimport.txt | 10 +- Documentation/git-cvsserver.txt | 20 +- Documentation/git-daemon.txt | 10 +- Documentation/git-describe.txt | 2 +- Documentation/git-diff.txt | 2 +- Documentation/git-difftool.txt | 2 +- Documentation/git-fetch.txt | 2 +- Documentation/git-filter-branch.txt | 4 +- Documentation/git-format-patch.txt | 10 +- Documentation/git-fsck.txt | 6 +- Documentation/git-grep.txt | 2 +- Documentation/git-hash-object.txt | 2 +- Documentation/git-help.txt | 2 +- Documentation/git-http-backend.txt | 2 +- Documentation/git-index-pack.txt | 6 +- Documentation/git-init.txt | 16 +- Documentation/git-log.txt | 2 +- Documentation/git-ls-files.txt | 2 +- Documentation/git-merge-index.txt | 4 +- Documentation/git-merge.txt | 4 +- Documentation/git-mergetool--lib.txt | 2 +- Documentation/git-mktag.txt | 4 +- Documentation/git-mv.txt | 2 +- Documentation/git-p4.txt | 66 +++---- Documentation/git-pack-objects.txt | 12 +- Documentation/git-pull.txt | 8 +- Documentation/git-push.txt | 8 +- Documentation/git-quiltimport.txt | 4 +- Documentation/git-rebase.txt | 2 +- Documentation/git-reflog.txt | 2 +- Documentation/git-remote-ext.txt | 14 +- Documentation/git-remote-fd.txt | 10 +- Documentation/git-remote-helpers.txt | 46 ++--- Documentation/git-replace.txt | 2 +- Documentation/git-rev-list.txt | 2 +- Documentation/git-rev-parse.txt | 4 +- Documentation/git-rm.txt | 8 +- Documentation/git-send-email.txt | 2 +- Documentation/git-send-pack.txt | 2 +- Documentation/git-sh-setup.txt | 4 +- Documentation/git-show-index.txt | 2 +- Documentation/git-status.txt | 8 +- Documentation/git-stripspace.txt | 2 +- Documentation/git-submodule.txt | 2 +- Documentation/git-svn.txt | 88 ++++----- Documentation/git-tag.txt | 2 +- Documentation/git-tools.txt | 40 ++-- Documentation/git-update-index.txt | 16 +- Documentation/git-update-ref.txt | 2 +- Documentation/git-upload-archive.txt | 2 +- Documentation/git-upload-pack.txt | 2 +- Documentation/git-var.txt | 12 +- Documentation/git-verify-pack.txt | 2 +- Documentation/git-verify-tag.txt | 2 +- Documentation/git-web--browse.txt | 4 +- Documentation/git-whatchanged.txt | 4 +- Documentation/git.txt | 90 ++++----- Documentation/gitattributes.txt | 68 +++---- Documentation/gitcli.txt | 14 +- Documentation/gitcore-tutorial.txt | 150 +++++++-------- Documentation/gitcredentials.txt | 24 +-- Documentation/gitcvs-migration.txt | 20 +- Documentation/gitdiffcore.txt | 2 +- Documentation/gitglossary.txt | 4 +- Documentation/githooks.txt | 8 +- Documentation/gitignore.txt | 22 +-- Documentation/gitk.txt | 8 +- Documentation/gitmodules.txt | 4 +- Documentation/gitnamespaces.txt | 2 +- Documentation/gitrepository-layout.txt | 10 +- Documentation/gitrevisions.txt | 2 +- Documentation/gittutorial-2.txt | 38 ++-- Documentation/gittutorial.txt | 48 ++--- Documentation/gitweb.conf.txt | 32 ++-- Documentation/gitweb.txt | 22 +-- Documentation/gitworkflows.txt | 6 +- Documentation/glossary-content.txt | 58 +++--- Documentation/howto-index.sh | 4 +- Documentation/howto/maintain-git.txt | 6 +- Documentation/howto/new-command.txt | 20 +- .../howto/rebase-from-internal-branch.txt | 6 +- Documentation/howto/rebuild-from-update-hook.txt | 8 +- .../howto/recover-corrupted-blob-object.txt | 4 +- Documentation/howto/revert-a-faulty-merge.txt | 2 +- Documentation/howto/revert-branch-rebase.txt | 4 +- Documentation/howto/setup-git-server-over-http.txt | 18 +- Documentation/howto/use-git-daemon.txt | 2 +- .../howto/using-signed-tag-in-pull-request.txt | 4 +- Documentation/i18n.txt | 8 +- Documentation/merge-config.txt | 8 +- Documentation/rev-list-options.txt | 4 +- Documentation/revisions.txt | 2 +- Documentation/technical/api-builtin.txt | 2 +- Documentation/technical/api-config.txt | 10 +- Documentation/technical/api-credentials.txt | 16 +- Documentation/technical/api-directory-listing.txt | 2 +- Documentation/technical/api-index-skel.txt | 4 +- Documentation/technical/api-parse-options.txt | 2 +- Documentation/technical/api-remote.txt | 2 +- Documentation/technical/index-format.txt | 8 +- Documentation/technical/pack-format.txt | 4 +- Documentation/technical/pack-heuristics.txt | 20 +- Documentation/technical/racy-git.txt | 26 +-- Documentation/urls-remotes.txt | 2 +- Documentation/urls.txt | 2 +- Documentation/user-manual.txt | 212 ++++++++++----------- 132 files changed, 904 insertions(+), 904 deletions(-) --- Thomas ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] Change old system name 'GIT' to 'Git' 2013-01-19 9:57 [PATCH 0/2] GIT, Git, git Thomas Ackermann @ 2013-01-19 9:59 ` Thomas Ackermann 2013-01-19 10:39 ` David Aguilar 2013-01-19 15:01 ` Aw: " Thomas Ackermann 2013-01-19 22:31 ` [PATCH 0/2] GIT, Git, git Jonathan Nieder 1 sibling, 2 replies; 10+ messages in thread From: Thomas Ackermann @ 2013-01-19 9:59 UTC (permalink / raw) To: th.acker, git Signed-off-by: Thomas Ackermann <th.acker@arcor.de> --- Documentation/asciidoc.conf | 2 +- Documentation/everyday.txt | 4 ++-- Documentation/git-clone.txt | 2 +- Documentation/git-cvsexportcommit.txt | 2 +- Documentation/git-cvsserver.txt | 8 ++++---- Documentation/git-daemon.txt | 4 ++-- Documentation/git-mv.txt | 2 +- Documentation/git-send-email.txt | 2 +- Documentation/git-tools.txt | 14 +++++++------- Documentation/git-update-ref.txt | 2 +- Documentation/git.txt | 2 +- Documentation/gitcore-tutorial.txt | 4 ++-- Documentation/gitglossary.txt | 2 +- Documentation/gittutorial.txt | 2 +- Documentation/gitweb.txt | 2 +- Documentation/gitworkflows.txt | 2 +- Documentation/glossary-content.txt | 2 +- Documentation/howto-index.sh | 2 +- Documentation/howto/rebase-from-internal-branch.txt | 6 +++--- Documentation/howto/revert-branch-rebase.txt | 4 ++-- Documentation/howto/setup-git-server-over-http.txt | 4 ++-- Documentation/technical/api-index-skel.txt | 4 ++-- Documentation/technical/index-format.txt | 6 +++--- Documentation/technical/pack-format.txt | 4 ++-- Documentation/user-manual.txt | 4 ++-- 25 files changed, 46 insertions(+), 46 deletions(-) diff --git a/Documentation/asciidoc.conf b/Documentation/asciidoc.conf index 1273a85..2c16c53 100644 --- a/Documentation/asciidoc.conf +++ b/Documentation/asciidoc.conf @@ -4,7 +4,7 @@ # # Note, {0} is the manpage section, while {target} is the command. # -# Show GIT link as: <command>(<section>); if section is defined, else just show +# Show Git link as: <command>(<section>); if section is defined, else just show # the command. [macros] diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt index 048337b..6acfd33 100644 --- a/Documentation/everyday.txt +++ b/Documentation/everyday.txt @@ -1,4 +1,4 @@ -Everyday GIT With 20 Commands Or So +Everyday Git With 20 Commands Or So =================================== <<Individual Developer (Standalone)>> commands are essential for @@ -229,7 +229,7 @@ commands in addition to the ones needed by participants. Examples ~~~~~~~~ -My typical GIT day.:: +My typical Git day.:: + ------------ $ git status <1> diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 7fefdb0..597048b 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -125,7 +125,7 @@ objects from the source repository into a pack in the cloned repository. No checkout of HEAD is performed after the clone is complete. --bare:: - Make a 'bare' GIT repository. That is, instead of + Make a 'bare' Git repository. That is, instead of creating `<directory>` and placing the administrative files in `<directory>/.git`, make the `<directory>` itself the `$GIT_DIR`. This obviously implies the `-n` diff --git a/Documentation/git-cvsexportcommit.txt b/Documentation/git-cvsexportcommit.txt index 7f79cec..a671e22 100644 --- a/Documentation/git-cvsexportcommit.txt +++ b/Documentation/git-cvsexportcommit.txt @@ -15,7 +15,7 @@ SYNOPSIS DESCRIPTION ----------- -Exports a commit from GIT to a CVS checkout, making it easier +Exports a commit from Git to a CVS checkout, making it easier to merge patches from a git repository into a CVS repository. Specify the name of a CVS checkout using the -w switch or execute it diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 88d814a..36d069b 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -72,9 +72,9 @@ plugin. Most functionality works fine with both of these clients. LIMITATIONS ----------- -CVS clients cannot tag, branch or perform GIT merges. +CVS clients cannot tag, branch or perform Git merges. -'git-cvsserver' maps GIT branches to CVS modules. This is very different +'git-cvsserver' maps Git branches to CVS modules. This is very different from what most CVS users would expect since in CVS modules usually represent one or more directories. @@ -130,7 +130,7 @@ Then provide your password via the pserver method, for example: ------ cvs -d:pserver:someuser:somepassword <at> server/path/repo.git co <HEAD_name> ------ -No special setup is needed for SSH access, other than having GIT tools +No special setup is needed for SSH access, other than having Git tools in the PATH. If you have clients that do not accept the CVS_SERVER environment variable, you can rename 'git-cvsserver' to `cvs`. @@ -197,7 +197,7 @@ allowing access over SSH. shell is bash, .bashrc may be a reasonable alternative. 5. Clients should now be able to check out the project. Use the CVS 'module' - name to indicate what GIT 'head' you want to check out. This also sets the + name to indicate what Git 'head' you want to check out. This also sets the name of your newly checked-out directory, unless you tell it otherwise with `-d <dir_name>`. For example, this checks out 'master' branch to the `project-master` directory: diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index 7e5098a..80de4f6 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -51,7 +51,7 @@ OPTIONS --base-path=<path>:: Remap all the path requests as relative to the given path. - This is sort of "GIT root" - if you run 'git daemon' with + This is sort of "Git root" - if you run 'git daemon' with '--base-path=/srv/git' on example.com, then if you later try to pull 'git://example.com/hello.git', 'git daemon' will interpret the path as '/srv/git/hello.git'. @@ -73,7 +73,7 @@ OPTIONS whitelist. --export-all:: - Allow pulling from all directories that look like GIT repositories + Allow pulling from all directories that look like Git repositories (have the 'objects' and 'refs' subdirectories), even if they do not have the 'git-daemon-export-ok' file. diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index e3c8448..bcb79c9 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -34,7 +34,7 @@ OPTIONS -k:: Skip move or rename actions which would lead to an error condition. An error happens when a source is neither existing nor - controlled by GIT, or when it would overwrite an existing + controlled by Git, or when it would overwrite an existing file unless '-f' is given. -n:: --dry-run:: diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index eeb561c..44a1f7c 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -67,7 +67,7 @@ The --cc option must be repeated for each user you want on the cc list. When '--compose' is used, git send-email will use the From, Subject, and In-Reply-To headers specified in the message. If the body of the message (what you type after the headers and a blank line) only contains blank -(or GIT: prefixed) lines the summary won't be sent, but From, Subject, +(or Git: prefixed) lines the summary won't be sent, but From, Subject, and In-Reply-To headers will be used unless they are removed. + Missing From or In-Reply-To headers will be prompted for. diff --git a/Documentation/git-tools.txt b/Documentation/git-tools.txt index a96403c..8428827 100644 --- a/Documentation/git-tools.txt +++ b/Documentation/git-tools.txt @@ -19,24 +19,24 @@ Alternative/Augmentative Porcelains Cogito is a version control system layered on top of the git tree history storage system. It aims at seamless user interface and ease of use, - providing generally smoother user experience than the "raw" Core GIT + providing generally smoother user experience than the "raw" Core Git itself and indeed many other version control systems. Cogito is no longer maintained as most of its functionality - is now in core GIT. + is now in core Git. - *pg* (http://www.spearce.org/category/projects/scm/pg/) - pg is a shell script wrapper around GIT to help the user manage a set of + pg is a shell script wrapper around Git to help the user manage a set of patches to files. pg is somewhat like quilt or StGIT, but it does have a slightly different feature set. - *StGit* (http://www.procode.org/stgit/) - Stacked GIT provides a quilt-like patch management functionality in the - GIT environment. You can easily manage your patches in the scope of GIT + Stacked Git provides a quilt-like patch management functionality in the + Git environment. You can easily manage your patches in the scope of Git until they get merged upstream. @@ -45,7 +45,7 @@ History Viewers - *gitk* (shipped with git-core) - gitk is a simple Tk GUI for browsing history of GIT repositories easily. + gitk is a simple Tk GUI for browsing history of Git repositories easily. - *gitview* (contrib/) @@ -55,7 +55,7 @@ History Viewers - *gitweb* (shipped with git-core) - GITweb provides full-fledged web interface for GIT repositories. + GITweb provides full-fledged web interface for Git repositories. - *qgit* (http://digilander.libero.it/mcostalba/) diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt index d377a35..0df13ff 100644 --- a/Documentation/git-update-ref.txt +++ b/Documentation/git-update-ref.txt @@ -73,7 +73,7 @@ in ref value. Log lines are formatted as: Where "oldsha1" is the 40 character hexadecimal value previously stored in <ref>, "newsha1" is the 40 character hexadecimal value of <newvalue> and "committer" is the committer's name, email address -and date in the standard GIT committer ident format. +and date in the standard Git committer ident format. Optionally with -m: diff --git a/Documentation/git.txt b/Documentation/git.txt index 555250d..1aac71e 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -890,7 +890,7 @@ See also the link:howto-index.html[howto] documents for some useful examples. The internals are documented in the -link:technical/api-index.html[GIT API documentation]. +link:technical/api-index.html[Git API documentation]. Users migrating from CVS may also want to read linkgit:gitcvs-migration[7]. diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index 5325c5a..6a701dd 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -16,8 +16,8 @@ This tutorial explains how to use the "core" git commands to set up and work with a git repository. If you just need to use git as a revision control system you may prefer -to start with "A Tutorial Introduction to GIT" (linkgit:gittutorial[7]) or -link:user-manual.html[the GIT User Manual]. +to start with "A Tutorial Introduction to Git" (linkgit:gittutorial[7]) or +link:user-manual.html[the Git User Manual]. However, an understanding of these low-level tools can be helpful if you want to understand git's internals. diff --git a/Documentation/gitglossary.txt b/Documentation/gitglossary.txt index d77a45a..6d7b195 100644 --- a/Documentation/gitglossary.txt +++ b/Documentation/gitglossary.txt @@ -3,7 +3,7 @@ gitglossary(7) NAME ---- -gitglossary - A GIT Glossary +gitglossary - A Git Glossary SYNOPSIS -------- diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index f1cb6f3..9dd45c4 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -656,7 +656,7 @@ digressions that may be interesting at this point are: * linkgit:gitworkflows[7]: Gives an overview of recommended workflows. - * link:everyday.html[Everyday GIT with 20 Commands Or So] + * link:everyday.html[Everyday Git with 20 Commands Or So] * linkgit:gitcvs-migration[7]: Git for CVS users. diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt index 168e8bf..d364c3a 100644 --- a/Documentation/gitweb.txt +++ b/Documentation/gitweb.txt @@ -504,7 +504,7 @@ repositories, you can configure Apache like this: The above configuration expects your public repositories to live under '/pub/git' and will serve them as `http://git.domain.org/dir-under-pub-git`, -both as cloneable GIT URL and as browseable gitweb interface. If you then +both as cloneable Git URL and as browseable gitweb interface. If you then start your linkgit:git-daemon[1] with `--base-path=/pub/git --export-all` then you can even use the `git://` URL with exactly the same path. diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index 8b8c6ae..e2e7d65 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -242,7 +242,7 @@ tag to the tip of 'master' indicating the release version: .Release tagging [caption="Recipe: "] ===================================== -`git tag -s -m "GIT X.Y.Z" vX.Y.Z master` +`git tag -s -m "Git X.Y.Z" vX.Y.Z master` ===================================== You need to push the new tag to a public git server (see diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index f928b57..7c28aef 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -52,7 +52,7 @@ [[def_cherry-picking]]cherry-picking:: In <<def_SCM,SCM>> jargon, "cherry pick" means to choose a subset of changes out of a series of changes (typically commits) and record them - as a new series of changes on top of a different codebase. In GIT, this is + as a new series of changes on top of a different codebase. In Git, this is performed by the "git cherry-pick" command to extract the change introduced by an existing <<def_commit,commit>> and to record it based on the tip of the current <<def_branch,branch>> as a new commit. diff --git a/Documentation/howto-index.sh b/Documentation/howto-index.sh index 34aa30c..8e82e52 100755 --- a/Documentation/howto-index.sh +++ b/Documentation/howto-index.sh @@ -1,7 +1,7 @@ #!/bin/sh cat <<\EOF -GIT Howto Index +Git Howto Index =============== Here is a collection of mailing list postings made by various diff --git a/Documentation/howto/rebase-from-internal-branch.txt b/Documentation/howto/rebase-from-internal-branch.txt index 4627ee4..19ab604 100644 --- a/Documentation/howto/rebase-from-internal-branch.txt +++ b/Documentation/howto/rebase-from-internal-branch.txt @@ -4,7 +4,7 @@ Cc: Petr Baudis <pasky@suse.cz>, Linus Torvalds <torvalds@osdl.org> Subject: Re: sending changesets from the middle of a git tree Date: Sun, 14 Aug 2005 18:37:39 -0700 Abstract: In this article, JC talks about how he rebases the - public "pu" branch using the core GIT tools when he updates + public "pu" branch using the core Git tools when he updates the "master" branch, and how "rebase" works. Also discussed is how this applies to individual developers who sends patches upstream. @@ -31,7 +31,7 @@ up. With its basing philosophical ancestry on quilt, this is the kind of task StGIT is designed to do. I just have done a simpler one, this time using only the core -GIT tools. +Git tools. I had a handful of commits that were ahead of master in pu, and I wanted to add some documentation bypassing my usual habit of @@ -96,7 +96,7 @@ you ran fsck-cache, which is normal. After testing "pu", you can run "git prune" to get rid of those original three commits. While I am talking about "git rebase", I should talk about how -to do cherrypicking using only the core GIT tools. +to do cherrypicking using only the core Git tools. Let's go back to the earlier picture, with different labels. diff --git a/Documentation/howto/revert-branch-rebase.txt b/Documentation/howto/revert-branch-rebase.txt index a59ced8..84dd839 100644 --- a/Documentation/howto/revert-branch-rebase.txt +++ b/Documentation/howto/revert-branch-rebase.txt @@ -12,10 +12,10 @@ How to revert an existing commit ================================ One of the changes I pulled into the 'master' branch turns out to -break building GIT with GCC 2.95. While they were well intentioned +break building Git with GCC 2.95. While they were well intentioned portability fixes, keeping things working with gcc-2.95 was also important. Here is what I did to revert the change in the 'master' -branch and to adjust the 'pu' branch, using core GIT tools and +branch and to adjust the 'pu' branch, using core Git tools and barebone Porcelain. First, prepare a throw-away branch in case I screw things up. diff --git a/Documentation/howto/setup-git-server-over-http.txt b/Documentation/howto/setup-git-server-over-http.txt index a695f01..e49d785 100644 --- a/Documentation/howto/setup-git-server-over-http.txt +++ b/Documentation/howto/setup-git-server-over-http.txt @@ -53,10 +53,10 @@ In effect, this means you're going to be root, or that you're using a preconfigured WebDAV server. -Step 1: setup a bare GIT repository +Step 1: setup a bare Git repository ----------------------------------- -At the time of writing, git-http-push cannot remotely create a GIT +At the time of writing, git-http-push cannot remotely create a Git repository. So we have to do that at the server side with git. Another option is to generate an empty bare repository at the client and copy it to the server with a WebDAV client (which is the only option if Git diff --git a/Documentation/technical/api-index-skel.txt b/Documentation/technical/api-index-skel.txt index 730cfac..eda8c19 100644 --- a/Documentation/technical/api-index-skel.txt +++ b/Documentation/technical/api-index-skel.txt @@ -1,7 +1,7 @@ -GIT API Documents +Git API Documents ================= -GIT has grown a set of internal API over time. This collection +Git has grown a set of internal API over time. This collection documents them. //////////////////////////////////////////////////////////////// diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt index 7324154..6a05ee2 100644 --- a/Documentation/technical/index-format.txt +++ b/Documentation/technical/index-format.txt @@ -1,4 +1,4 @@ -GIT index format +Git index format ================ == The git index file has the following format @@ -21,9 +21,9 @@ GIT index format - Extensions Extensions are identified by signature. Optional extensions can - be ignored if GIT does not understand them. + be ignored if Git does not understand them. - GIT currently supports cached tree and resolve undo extensions. + Git currently supports cached tree and resolve undo extensions. 4-byte extension signature. If the first byte is 'A'..'Z' the extension is optional and can be ignored. diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt index a7871fb..e7d07bc 100644 --- a/Documentation/technical/pack-format.txt +++ b/Documentation/technical/pack-format.txt @@ -1,4 +1,4 @@ -GIT pack format +Git pack format =============== == pack-*.pack files have the following format: @@ -9,7 +9,7 @@ GIT pack format The signature is: {'P', 'A', 'C', 'K'} 4-byte version number (network byte order): - GIT currently accepts version number 2 or 3 but + Git currently accepts version number 2 or 3 but generates version 2 only. 4-byte number of objects contained in the pack (network byte order) diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 1b377dc..c93e1a8 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -2299,7 +2299,7 @@ Here are some of the scripts that simplify all this even further. ------------------------------------------------- ==== update script ==== -# Update a branch in my GIT tree. If the branch to be updated +# Update a branch in my Git tree. If the branch to be updated # is origin, then pull from kernel.org. Otherwise merge # origin/master branch into test|release branch @@ -2357,7 +2357,7 @@ esac ------------------------------------------------- ==== status script ==== -# report on status of my ia64 GIT tree +# report on status of my ia64 Git tree gb=$(tput setab 2) rb=$(tput setab 1) -- 1.8.0.msysgit.0 --- Thomas ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] Change old system name 'GIT' to 'Git' 2013-01-19 9:59 ` [PATCH 1/2] Change old system name 'GIT' to 'Git' Thomas Ackermann @ 2013-01-19 10:39 ` David Aguilar 2013-01-20 18:33 ` Junio C Hamano 2013-01-19 15:01 ` Aw: " Thomas Ackermann 1 sibling, 1 reply; 10+ messages in thread From: David Aguilar @ 2013-01-19 10:39 UTC (permalink / raw) To: Thomas Ackermann; +Cc: git On Sat, Jan 19, 2013 at 1:59 AM, Thomas Ackermann <th.acker@arcor.de> wrote: > @@ -55,7 +55,7 @@ History Viewers > > - *gitweb* (shipped with git-core) > > - GITweb provides full-fledged web interface for GIT repositories. > + GITweb provides full-fledged web interface for Git repositories. What about GITweb? > diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt > index d377a35..0df13ff 100644 > --- a/Documentation/git-update-ref.txt > +++ b/Documentation/git-update-ref.txt > @@ -73,7 +73,7 @@ in ref value. Log lines are formatted as: > Where "oldsha1" is the 40 character hexadecimal value previously > stored in <ref>, "newsha1" is the 40 character hexadecimal value of > <newvalue> and "committer" is the committer's name, email address > -and date in the standard GIT committer ident format. > +and date in the standard Git committer ident format. IMO some of these look nicer when everything is lowercase. e.g. "standard git committer ident format". > diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt > index 168e8bf..d364c3a 100644 > --- a/Documentation/gitweb.txt > +++ b/Documentation/gitweb.txt > @@ -504,7 +504,7 @@ repositories, you can configure Apache like this: > > The above configuration expects your public repositories to live under > '/pub/git' and will serve them as `http://git.domain.org/dir-under-pub-git`, > -both as cloneable GIT URL and as browseable gitweb interface. If you then > +both as cloneable Git URL and as browseable gitweb interface. If you then > start your linkgit:git-daemon[1] with `--base-path=/pub/git --export-all` > then you can even use the `git://` URL with exactly the same path. Git but not Gitweb? IMO it reads nicer as "cloneable git URL", which also avoids this mismatch, but like I said that's my opinion. $ git grep 'git repositor' | wc -l 226 These changes touch, for example, git-clone.txt to make it say: "Make a 'bare' Git repository". Why not lowercase? In that same file it has "git repository", in lowercase, in a later paragraph. I'm not sure which way is preferred, but I think they should be consistent. Anyways, just some small notes. cheers, -- David ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] Change old system name 'GIT' to 'Git' 2013-01-19 10:39 ` David Aguilar @ 2013-01-20 18:33 ` Junio C Hamano 2013-01-20 18:53 ` Joachim Schmitz 0 siblings, 1 reply; 10+ messages in thread From: Junio C Hamano @ 2013-01-20 18:33 UTC (permalink / raw) To: David Aguilar; +Cc: Thomas Ackermann, git David Aguilar <davvid@gmail.com> writes: > On Sat, Jan 19, 2013 at 1:59 AM, Thomas Ackermann <th.acker@arcor.de> wrote: >> @@ -55,7 +55,7 @@ History Viewers >> >> - *gitweb* (shipped with git-core) >> >> - GITweb provides full-fledged web interface for GIT repositories. >> + GITweb provides full-fledged web interface for Git repositories. > > What about GITweb? > >> diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt >> index d377a35..0df13ff 100644 >> --- a/Documentation/git-update-ref.txt >> +++ b/Documentation/git-update-ref.txt >> @@ -73,7 +73,7 @@ in ref value. Log lines are formatted as: >> Where "oldsha1" is the 40 character hexadecimal value previously >> stored in <ref>, "newsha1" is the 40 character hexadecimal value of >> <newvalue> and "committer" is the committer's name, email address >> -and date in the standard GIT committer ident format. >> +and date in the standard Git committer ident format. > > IMO some of these look nicer when everything is lowercase. > e.g. "standard git committer ident format". I do not think we ever intended to change the *name* of the software. In the early days, we wrote GIT in places where, if we were doing a fancier typography, we would have used drop-caps for the latter two (i.e. it is "Git" spelled in a font whose lower case alphabets have the same shape as upper case ones but are smaller). So there were only "git" vs "Git". If I were to decide today to change the spellings, with an explicit purpose of making things more consistent across documentation, it may make sense to use even a simpler rule that is less error-prone for people who write new sentences that has to have the word. How about treating it just like any other ordinary word? That is, we say "git" (without double-quotes, of course), unless it comes at the beginning of a sentence? ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] Change old system name 'GIT' to 'Git' 2013-01-20 18:33 ` Junio C Hamano @ 2013-01-20 18:53 ` Joachim Schmitz 2013-01-20 19:02 ` Junio C Hamano 0 siblings, 1 reply; 10+ messages in thread From: Joachim Schmitz @ 2013-01-20 18:53 UTC (permalink / raw) To: git Junio C Hamano wrote: > David Aguilar <davvid@gmail.com> writes: > >> On Sat, Jan 19, 2013 at 1:59 AM, Thomas Ackermann >> <th.acker@arcor.de> wrote: >>> @@ -55,7 +55,7 @@ History Viewers >>> >>> - *gitweb* (shipped with git-core) >>> >>> - GITweb provides full-fledged web interface for GIT repositories. >>> + GITweb provides full-fledged web interface for Git repositories. >> >> What about GITweb? >> >>> diff --git a/Documentation/git-update-ref.txt >>> b/Documentation/git-update-ref.txt index d377a35..0df13ff 100644 >>> --- a/Documentation/git-update-ref.txt >>> +++ b/Documentation/git-update-ref.txt >>> @@ -73,7 +73,7 @@ in ref value. Log lines are formatted as: >>> Where "oldsha1" is the 40 character hexadecimal value previously >>> stored in <ref>, "newsha1" is the 40 character hexadecimal value of >>> <newvalue> and "committer" is the committer's name, email address >>> -and date in the standard GIT committer ident format. >>> +and date in the standard Git committer ident format. >> >> IMO some of these look nicer when everything is lowercase. >> e.g. "standard git committer ident format". > > I do not think we ever intended to change the *name* of the > software. > > In the early days, we wrote GIT in places where, if we were doing a > fancier typography, we would have used drop-caps for the latter two > (i.e. it is "Git" spelled in a font whose lower case alphabets have > the same shape as upper case ones but are smaller). So there were > only "git" vs "Git". > > If I were to decide today to change the spellings, with an explicit > purpose of making things more consistent across documentation, it > may make sense to use even a simpler rule that is less error-prone > for people who write new sentences that has to have the word. How > about treating it just like any other ordinary word? That is, we > say "git" (without double-quotes, of course), unless it comes at the > beginning of a sentence? Because then it could get confused with "git", the command? That would be lower case even at the beginning of a sentence, wouldn't it? Bye, Jojo ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] Change old system name 'GIT' to 'Git' 2013-01-20 18:53 ` Joachim Schmitz @ 2013-01-20 19:02 ` Junio C Hamano 0 siblings, 0 replies; 10+ messages in thread From: Junio C Hamano @ 2013-01-20 19:02 UTC (permalink / raw) To: Joachim Schmitz; +Cc: git "Joachim Schmitz" <jojo@schmitz-digital.de> writes: > Because then it could get confused with "git", the command? That would > be lower case even at the beginning of a sentence, wouldn't it? Is it a real-world problem? I think in a prose when you refer to "git" the command, you would say something like The `git` command started as a thin wrapper to many subcommand of the `git-subcmd` form. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Aw: Re: [PATCH 1/2] Change old system name 'GIT' to 'Git' 2013-01-19 9:59 ` [PATCH 1/2] Change old system name 'GIT' to 'Git' Thomas Ackermann 2013-01-19 10:39 ` David Aguilar @ 2013-01-19 15:01 ` Thomas Ackermann 2013-01-20 0:47 ` David Aguilar 2013-01-20 11:24 ` Aw: " Matthieu Moy 1 sibling, 2 replies; 10+ messages in thread From: Thomas Ackermann @ 2013-01-19 15:01 UTC (permalink / raw) To: davvid, th.acker; +Cc: git > > What about GITweb? > You are right; I missed that because I grepped only for 'GIT' as a whole word. 'gitweb' and 'GITweb' should be changed to 'Gitweb'. > > IMO some of these look nicer when everything is lowercase. > e.g. "standard git committer ident format". > IMHO what seems nicer here is the spelling we are all accustomed to. The whole point of my patch is to use 'Git' consistently when we are talking about the system and not the individual command. > > $ git grep 'git repositor' | wc -l > 226 > > These changes touch, for example, git-clone.txt to make it > say: "Make a 'bare' Git repository". Why not lowercase? > When you also apply my second patch you only get 17 occurences of "git repository" which I missed to change to 'Git repository' ... Thanks for looking into this! --- Thomas ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: [PATCH 1/2] Change old system name 'GIT' to 'Git' 2013-01-19 15:01 ` Aw: " Thomas Ackermann @ 2013-01-20 0:47 ` David Aguilar 2013-01-20 11:24 ` Aw: " Matthieu Moy 1 sibling, 0 replies; 10+ messages in thread From: David Aguilar @ 2013-01-20 0:47 UTC (permalink / raw) To: Thomas Ackermann; +Cc: git On Sat, Jan 19, 2013 at 7:01 AM, Thomas Ackermann <th.acker@arcor.de> wrote: > >> >> What about GITweb? >> > You are right; I missed that because I grepped only for 'GIT' as a whole word. > 'gitweb' and 'GITweb' should be changed to 'Gitweb'. > >> >> IMO some of these look nicer when everything is lowercase. >> e.g. "standard git committer ident format". >> > IMHO what seems nicer here is the spelling we are all accustomed to. > The whole point of my patch is to use 'Git' consistently when > we are talking about the system and not the individual command. > >> >> $ git grep 'git repositor' | wc -l >> 226 >> >> These changes touch, for example, git-clone.txt to make it >> say: "Make a 'bare' Git repository". Why not lowercase? >> > When you also apply my second patch you only get 17 occurences of "git repository" > which I missed to change to 'Git repository' ... > > Thanks for looking into this! Thank *you* for tackling these last 226 and listening to my silly opinions. The end result will be much nicer all around. -- David ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Aw: Re: [PATCH 1/2] Change old system name 'GIT' to 'Git' 2013-01-19 15:01 ` Aw: " Thomas Ackermann 2013-01-20 0:47 ` David Aguilar @ 2013-01-20 11:24 ` Matthieu Moy 1 sibling, 0 replies; 10+ messages in thread From: Matthieu Moy @ 2013-01-20 11:24 UTC (permalink / raw) To: Thomas Ackermann; +Cc: davvid, git Thomas Ackermann <th.acker@arcor.de> writes: > The whole point of my patch is to use 'Git' consistently when > we are talking about the system and not the individual command. I like the idea. "git" should obviously remain lower-case when talking about the command, but deserves a capital when talking about the software independantly of whether it's called from command-line. Just like I type "firefox" in a shell to launch a program called "Firefox" (or even "Mozilla Firefox"). -- Matthieu Moy http://www-verimag.imag.fr/~moy/ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/2] GIT, Git, git 2013-01-19 9:57 [PATCH 0/2] GIT, Git, git Thomas Ackermann 2013-01-19 9:59 ` [PATCH 1/2] Change old system name 'GIT' to 'Git' Thomas Ackermann @ 2013-01-19 22:31 ` Jonathan Nieder 1 sibling, 0 replies; 10+ messages in thread From: Jonathan Nieder @ 2013-01-19 22:31 UTC (permalink / raw) To: Thomas Ackermann; +Cc: git Hi Thomas, Thomas Ackermann wrote: > Git changed its 'official' system name from 'GIT' to 'Git' in v1.6.5.3 > (as can be seen in the corresponding release note where 'GIT' was > changed to 'Git' in the header line). > > Alas the documention uses 'GIT', 'Git' or even 'git' to refer to the > Git system. So change every occurrence of 'GIT" and 'git' to 'Git' > whenever Git as a system is referred to (but don't do this change > in the release notes because they constitute a history orthogonal > to the history versioned by Git). I don't have any opinion about the subject at hand, except that making a consistent convention and documenting it somewhere to avoid future churn sounds like a fine idea. Instead, I'm writing for a procedural nitpick ;-): please move the above rationale to one of the commit messages, so it gets recorded somewhere that future readers can easily find it. Hope that helps, Jonathan ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-01-20 19:02 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-01-19 9:57 [PATCH 0/2] GIT, Git, git Thomas Ackermann 2013-01-19 9:59 ` [PATCH 1/2] Change old system name 'GIT' to 'Git' Thomas Ackermann 2013-01-19 10:39 ` David Aguilar 2013-01-20 18:33 ` Junio C Hamano 2013-01-20 18:53 ` Joachim Schmitz 2013-01-20 19:02 ` Junio C Hamano 2013-01-19 15:01 ` Aw: " Thomas Ackermann 2013-01-20 0:47 ` David Aguilar 2013-01-20 11:24 ` Aw: " Matthieu Moy 2013-01-19 22:31 ` [PATCH 0/2] GIT, Git, git Jonathan Nieder
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).