* Re: Find the starting point of a local branch
From: Tomas Carnecky @ 2012-12-24 5:34 UTC (permalink / raw)
To: Nguyen Thai Ngoc Duy, Seth Robertson; +Cc: Woody Wu, git
In-Reply-To: <CACsJy8CNd3W_WUMbZ1QZ4ReZ5ziX90QejK9mh1TMs0ig33kGMw@mail.gmail.com>
On Mon, 24 Dec 2012 12:28:45 +0700, Nguyen Thai Ngoc Duy <pclouds@gmail.com> wrote:
> On Mon, Dec 24, 2012 at 11:09 AM, Seth Robertson <in-gitvger@baka.org> wrote:
> >
> > In message <20121224035825.GA17203@zuhnb712>, Woody Wu writes:
> >
> > How can I find out what's the staring reference point (a commit number
> > or tag name) of a locally created branch? I can use gitk to find out it
> > but this method is slow, I think there might be a command line to do it
> > quickly.
> >
> > The answer is more complex than you probably suspected.
> >
> > Technically, `git log --oneline mybranch | tail -n 1` will tell you
> > the starting point of any branch. But...I'm sure that isn't what you
> > want to know.
> >
> > You want to know "what commit was I at when I typed `git branch
> > mybranch`"? The problem is git doesn't record this information and
> > doesn't have the slightest clue.
>
> Maybe we should store this information. reflog is a perfect place for
> this, I think. If this information is reliably available, git rebase
> can be told to "rebase my whole branch" instead of my choosing the
> base commit for it.
What's the starting point of the branch if I type: git branch foo <commit-ish>?
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Nguyen Thai Ngoc Duy @ 2012-12-24 5:45 UTC (permalink / raw)
To: Tomas Carnecky; +Cc: Seth Robertson, Woody Wu, git
In-Reply-To: <1356327291-ner-6552@calvin>
On Mon, Dec 24, 2012 at 12:34 PM, Tomas Carnecky
<tomas.carnecky@gmail.com> wrote:
>> Maybe we should store this information. reflog is a perfect place for
>> this, I think. If this information is reliably available, git rebase
>> can be told to "rebase my whole branch" instead of my choosing the
>> base commit for it.
>
> What's the starting point of the branch if I type: git branch foo <commit-ish>?
You start working off <commit-ish> so I think the starting point would
be <commit-ish>.
--
Duy
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Jeff King @ 2012-12-24 6:19 UTC (permalink / raw)
To: Nguyen Thai Ngoc Duy; +Cc: Seth Robertson, Woody Wu, git
In-Reply-To: <CACsJy8CNd3W_WUMbZ1QZ4ReZ5ziX90QejK9mh1TMs0ig33kGMw@mail.gmail.com>
On Mon, Dec 24, 2012 at 12:28:45PM +0700, Nguyen Thai Ngoc Duy wrote:
> > You want to know "what commit was I at when I typed `git branch
> > mybranch`"? The problem is git doesn't record this information and
> > doesn't have the slightest clue.
>
> Maybe we should store this information. reflog is a perfect place for
> this, I think. If this information is reliably available, git rebase
> can be told to "rebase my whole branch" instead of my choosing the
> base commit for it.
Is that what you really want, though? We record the "upstream" branch
already, and you can calculate the merge base with that branch to see
which commits are unique to your branch. In simple cases, that is the
same as "where did I start the branch". In more complex cases, it may
not be (e.g., if you merged some of the early commits in the branch
already). But in that latter case, would you really want to rebase
those commits that had been merged?
The reason that git does not bother storing "where did I start this
branch" is that it is usually not useful. The right question is usually
"what is the merge base". There are exceptions, of course (e.g., if you
are asking something like "what work did I do while checked out on the
'foo' branch"). But for merging and rebasing, I think the computed
merge-base is much more likely to do what people want.
-Peff
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Junio C Hamano @ 2012-12-24 6:27 UTC (permalink / raw)
To: Nguyen Thai Ngoc Duy; +Cc: Tomas Carnecky, Seth Robertson, Woody Wu, git
In-Reply-To: <CACsJy8DkA-J+ds1eHBqrRyiZrOigORTtxVeEQpZjGHrBR+QjCQ@mail.gmail.com>
Nguyen Thai Ngoc Duy <pclouds@gmail.com> writes:
> On Mon, Dec 24, 2012 at 12:34 PM, Tomas Carnecky
> <tomas.carnecky@gmail.com> wrote:
>>> Maybe we should store this information. reflog is a perfect place for
>>> this, I think. If this information is reliably available, git rebase
>>> can be told to "rebase my whole branch" instead of my choosing the
>>> base commit for it.
>>
>> What's the starting point of the branch if I type: git branch foo <commit-ish>?
>
> You start working off <commit-ish> so I think the starting point would
> be <commit-ish>.
Yeah, that sounds sensible. Don't we already have it in the reflog,
though?
What is trickier is when you later transplant it to some other base
(perhaps prepare a topic on 'master', realize it should better apply
to 'maint' and move it there). If the user did the transplanting by
hand, reflog would probably not have enough information, e.g. after
$ git checkout maint^0
$ git log --oneline master..topic
$ git cherry-pick $one_of_the_commit_names_you_see_in_the_above
$ git cherry-pick $another_commit_name_you_see_in_the_above
...
$ git branch -f topic
no reflog other than HEAD@{} will tell you that you were at maint^0,
so the reflog of topic wouldn't know it "forked" from there, either.
^ permalink raw reply
* Re: [PATCH 2/2] learn to pick/revert into unborn branch
From: Martin von Zweigbergk @ 2012-12-24 7:20 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, Ramkumar Ramachandra
In-Reply-To: <7v4njcpof8.fsf@alter.siamese.dyndns.org>
On Sun, Dec 23, 2012 at 11:18 AM, Junio C Hamano <gitster@pobox.com> wrote:
> Martin von Zweigbergk <martinvonz@gmail.com> writes:
>> On Sat, Dec 22, 2012 at 7:24 PM, Junio C Hamano <gitster@pobox.com> wrote:
>
> I am not opposed to an "internal use" of the cherry-pick machinery to
> implement a corner case of "rebase -i":
>....
> 3. You run "rebase -i --root" to get this insn sheet:
>
> pick Add Makefile and hello.c for "Hello world"
> pick Add goodbye.c for "Goodbye world"
>
> and swap them:
>
> pick Add goodbye.c for "Goodbye world"
> pick Add Makefile and hello.c for "Hello world"
Right, and as you point out in your later message, editing the initial
commit is another (and more useful) use case. It could of course be
special cased in "git rebase", but I think doing it "git cherry-pick"
is the right thing to do. Hopefully git-rebase.sh can then just reset
to the void state and git-rebase--interactive.sh can just continue
without knowing or caring whether it got started on an unborn branch.
Hmm... I just realized the "branch" in "unborn branch" really means we
don't have "unborn detached HEAD", do we? So some more tricks are
probably necessary after all. :-(
> [...] It transplants something that used to depend on the entire
> history behind it to be the beginning of the history so its log
> needs to be adjusted, but "rebase -i" can choose to always make it
> conflict and force the user to write a correct log message, so it
> won't expose the fundamental flaw you would add if you allowed the
> end-user facing "cherry-pick" to pick something to create a new root
> commit without interaction.
If I understand you correctly, you are suggesting that "git rebase"
should set the action from "pick" to "edit" for the first commit in
the insn sheet if it is not a root commit. "git rebase -i --root"
doesn't currently do that, but it certainly could.
> I agree that "git reset" without any commit parameter to reset the
> index and optionally the working tree (with "--hard") should reset
> from an empty tree when you do not yet have any commit.
Good to hear.
> But I do not think it has anything to do with "cherry-pick to empty",
> so I do not agree with "In the same way" at all.
See later comment.
>> One use case might be to rewrite history by creating an new unborn
>> branch and picking the initial commit and a subset of other commits.
>
> If you mean, in the above sample history, to "git cherry-pick" the
> commit that starts the "Hello world" and then do something else on
> top of the resulting history, how would that be different from
> forking from that existing root commit?
True, the result would be the same. The user's thought process might
be a little different ("let me start from scratch" vs "let me start
almost from scratch"), but that's a very minor difference that I'm
sure any user would quickly overcome.
>> Anyway, I didn't implement it because I thought it would be very
>> useful, but mostly because I just thought it should work (for
>> completeness).
>
> I would not exactly call X "complete" if X works in one way in most
> cases and it works in quite a different way in one other case, only
> because it would have to barf if it wanted to work in the same way
> as in most cases, and the different behaviour is chosen only because
> "X that does something is better than X that stops in an impossible
> situation and barfs".
I agree, of course, but I don't see the behavior as different. When
thinking about behavior around the root of the history, I imagine that
all root commits actually have a parent, and that they all have the
same parent. I also imagine that on an unborn branch, instead of being
invalid, HEAD points to that same "single root" commit with an empty
tree. Despite this model not matching git's, I find that this helps me
reason about what the behavior of various commands should be.
With this reasoning, cherry-picking into an unborn branch is no
different from cherry-picking into any commit with an empty tree
(which of course would be rare, but not forbidden).
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Woody Wu @ 2012-12-24 7:31 UTC (permalink / raw)
To: Seth Robertson; +Cc: git
In-Reply-To: <201212240409.qBO49wkV020768@no.baka.org>
On Sun, Dec 23, 2012 at 11:09:58PM -0500, Seth Robertson wrote:
>
> In message <20121224035825.GA17203@zuhnb712>, Woody Wu writes:
>
> How can I find out what's the staring reference point (a commit number
> or tag name) of a locally created branch? I can use gitk to find out it
> but this method is slow, I think there might be a command line to do it
> quickly.
>
> The answer is more complex than you probably suspected.
>
> Technically, `git log --oneline mybranch | tail -n 1` will tell you
> the starting point of any branch. But...I'm sure that isn't what you
> want to know.
>
> You want to know "what commit was I at when I typed `git branch
> mybranch`"?
Yes, this is exactly I want to know.
>The problem is git doesn't record this information and
> doesn't have the slightest clue.
>
> But, you say, I can use `gitk` and see it. See? Right there. That
> isn't (necessarily) the "starting point" of the branch, it is the
> place where your branch diverged from some other branch. Git is
> actually quite able to tell you when the last time your branch
> diverged from some other branch. `git merge-base mybranch master`
> will tell you this, and is probably the answer you were looking for.
This is not working to me since I have more than one local branch that
diverged from the master, and in fact, the branch I have in question was
diverged from another local branch. With the method of 'git
merge-base', I have to remember a branch tree in my brain.
But thanks anyway, I see you guys's discussions and it's a little hard
to understand to me at the moment. Currently, I still have to use gitk
with narrowed outputs.
> Note that this is the *last* divergence. If your branch diverged and
> merged previously that will not be reported. Even worse, if you did a
> fast-forward merge (I recommend against them in general) then it is
> impossible to discover about what the independent pre-merge history
> was really like.
>
> -Seth Robertson
--
woody
I can't go back to yesterday - because I was a different person then.
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Kevin @ 2012-12-24 9:12 UTC (permalink / raw)
To: Woody Wu; +Cc: Seth Robertson, git
In-Reply-To: <20121224073103.GA10793@zuhnb712>
On Mon, Dec 24, 2012 at 8:31 AM, Woody Wu <narkewoody@gmail.com> wrote:
> But thanks anyway, I see you guys's discussions and it's a little hard
> to understand to me at the moment. Currently, I still have to use gitk
> with narrowed outputs.
Each commit refers to it's parent. If you take a branch, and keep
following the first parent of the commits, you will finally reach the
root commit (the first commit made). You don't see any branches, it's
just one straight line. That's why git can't tell you where a branch
started, because it all looks like a single branch to git.
With merge-base, you basically give git two branches, and git finds
the first ancestor that is common to both branches.
See [1] for an example. If you follow the arrows from branch a, you
get from E to A (note that commit C doesn't know about commit F
pointing to it). So it looks like there is only a single branch.
If you do git merge-base a b, git sees both branches have commit C in
common, and reports that as the merge-base.
[1]: http://g.jk.gs/9W.png
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Nguyen Thai Ngoc Duy @ 2012-12-24 11:16 UTC (permalink / raw)
To: Jeff King; +Cc: Seth Robertson, Woody Wu, git
In-Reply-To: <20121224061938.GA25186@sigill.intra.peff.net>
On Mon, Dec 24, 2012 at 1:19 PM, Jeff King <peff@peff.net> wrote:
> On Mon, Dec 24, 2012 at 12:28:45PM +0700, Nguyen Thai Ngoc Duy wrote:
>
>> > You want to know "what commit was I at when I typed `git branch
>> > mybranch`"? The problem is git doesn't record this information and
>> > doesn't have the slightest clue.
>>
>> Maybe we should store this information. reflog is a perfect place for
>> this, I think. If this information is reliably available, git rebase
>> can be told to "rebase my whole branch" instead of my choosing the
>> base commit for it.
>
> Is that what you really want, though? We record the "upstream" branch
> already, and you can calculate the merge base with that branch to see
> which commits are unique to your branch. In simple cases, that is the
> same as "where did I start the branch". In more complex cases, it may
> not be (e.g., if you merged some of the early commits in the branch
> already). But in that latter case, would you really want to rebase
> those commits that had been merged?
>
> The reason that git does not bother storing "where did I start this
> branch" is that it is usually not useful. The right question is usually
> "what is the merge base". There are exceptions, of course (e.g., if you
> are asking something like "what work did I do while checked out on the
> 'foo' branch"). But for merging and rebasing, I think the computed
> merge-base is much more likely to do what people want.
Rebasing is exactly why I want this. Merge base works most of the time
until you rewrite upstream (which I do sometimes). There are also
cases when I create a branch without upstream, or when upstream is
renamed. Still, making "rebase -i --topic" == "rebase -i $(git
merge-base HEAD @{upstream})" would be cool.
--
Duy
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Nguyen Thai Ngoc Duy @ 2012-12-24 11:21 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Tomas Carnecky, Seth Robertson, Woody Wu, git
In-Reply-To: <7vmwx4newy.fsf@alter.siamese.dyndns.org>
On Mon, Dec 24, 2012 at 1:27 PM, Junio C Hamano <gitster@pobox.com> wrote:
> Nguyen Thai Ngoc Duy <pclouds@gmail.com> writes:
>
>> On Mon, Dec 24, 2012 at 12:34 PM, Tomas Carnecky
>> <tomas.carnecky@gmail.com> wrote:
>>>> Maybe we should store this information. reflog is a perfect place for
>>>> this, I think. If this information is reliably available, git rebase
>>>> can be told to "rebase my whole branch" instead of my choosing the
>>>> base commit for it.
>>>
>>> What's the starting point of the branch if I type: git branch foo <commit-ish>?
>>
>> You start working off <commit-ish> so I think the starting point would
>> be <commit-ish>.
>
> Yeah, that sounds sensible. Don't we already have it in the reflog,
> though?
I looked briefly at reflog before writing my previous mail and noticed
that when I create a new branch (usually using "git checkout -b branch
ref") it does not record the base commit.
> What is trickier is when you later transplant it to some other base
> (perhaps prepare a topic on 'master', realize it should better apply
> to 'maint' and move it there). If the user did the transplanting by
> hand, reflog would probably not have enough information, e.g. after
>
> $ git checkout maint^0
> $ git log --oneline master..topic
> $ git cherry-pick $one_of_the_commit_names_you_see_in_the_above
> $ git cherry-pick $another_commit_name_you_see_in_the_above
> ...
> $ git branch -f topic
>
> no reflog other than HEAD@{} will tell you that you were at maint^0,
> so the reflog of topic wouldn't know it "forked" from there, either.
We could at least invalidate the recorded base in reflog and let user
define a new one (I hope).
--
Duy
^ permalink raw reply
* Re: [PATCH] Python scripts audited for minimum compatible version and checks added.
From: Pete Wyckoff @ 2012-12-24 13:36 UTC (permalink / raw)
To: Eric S. Raymond; +Cc: git
In-Reply-To: <20121220141855.05DAA44105@snark.thyrsus.com>
esr@thyrsus.com wrote on Thu, 20 Dec 2012 09:13 -0500:
> diff --git a/git-p4.py b/git-p4.py
> index 551aec9..ec060b4 100755
> --- a/git-p4.py
> +++ b/git-p4.py
> @@ -12,6 +12,11 @@ import optparse, sys, os, marshal, subprocess, shelve
> import tempfile, getopt, os.path, time, platform
> import re, shutil
>
> +if sys.hexversion < 0x02040000:
> + # The limiter is the subprocess module
> + sys.stderr.write("git-p4.py: requires Python 2.4 or later.")
> + sys.exit(1)
> +
> verbose = False
If 2.3 does not have the subprocess module, this script will fail
at the import, and not run your version test.
All the uses of sys.stderr.write() should probably include a
newline. Presumably you used write instead of print to avoid
2to3 differences.
The name of this particular script, as users would type it, is
"git p4"; no dash and no ".py".
Many of your changes have these three problems; I just picked on
my favorite one.
> diff --git a/git-remote-testgit.py b/git-remote-testgit.py
> index 5f3ebd2..22d2eb6 100644
> --- a/git-remote-testgit.py
> +++ b/git-remote-testgit.py
> @@ -31,6 +31,11 @@ from git_remote_helpers.git.exporter import GitExporter
> from git_remote_helpers.git.importer import GitImporter
> from git_remote_helpers.git.non_local import NonLocalGit
>
> +if sys.hexversion < 0x01050200:
> + # os.makedirs() is the limiter
> + sys.stderr.write("git-remote-testgit.py: requires Python 1.5.2 or later.")
> + sys.exit(1)
> +
This one, though, is a bit of a lie because git_remote_helpers
needs 2.4, and you add that version enforcement in the library.
I assume what you're trying to do here is to make the
version-related failures more explicit, rather than have users
parse an ImportError traceback, e.g. That seems somewhat useful
for people with ancient installs.
But what about the high-end of the version range? I'm pretty
sure most of these scripts will throw syntax errors on >= 3.0,
how should we catch that before users see it?
-- Pete
^ permalink raw reply
* GIT get corrupted on lustre
From: Eric Chamberland @ 2012-12-24 14:08 UTC (permalink / raw)
To: git
Hi,
we are using git since may and all is working fine for all of us (almost
20 people) on our workstations. However, when we clone our repositories
to the cluster, only and only there
we are having many problems similiar to this post:
http://thread.gmane.org/gmane.comp.file-systems.lustre.user/12093
Doing a "git clone" always work fine, but when we "git pull" or "git gc"
or "git fsck", often (1/5) the local repository get corrupted.
for example, I got this error two days ago while doing "git gc":
error: index file .git/objects/pack/pack-7b43b1c613a851392aaf4f66916dff2577931576.idx is too small
error: refs/heads/mail_seekable does not point to a valid object!
also, I got this error 5 days ago:
error: index file .git/objects/pack/pack-ef9b5bbff1ebc1af63ef4262ade3e18b439c58af.idx is too small
error: refs/heads/mail_seekable does not point to a valid object!
Removing stale temporary file .git/objects/pack/tmp_pack_lO7aw2
and this one some time ago:
Removing stale temporary file .git/objects/pack/tmp_pack_5CHb2F
Removing stale temporary file .git/objects/pack/tmp_pack_GY159g
Removing stale temporary file .git/objects/pack/tmp_pack_aKkXTS
We are using git 1.8.0.1 on CentOS release 5.8 (Final).
We think it could be related to the fact that we are on a *Lustre*
filesystem, which I think doesn't fully support file locking.
Questions:
#1) However, how can we *test* the filesystem (lustre) compatibility
with git? (Is there a unit test we can run?)
#2) Is there a way to compile GIT to be compatible with lustre? (ex: no
threads?)
#3) If you *know* your filesystem doesn't allow file locking, how would
you configure/compile GIT to work on it?
#4) Anyone has another idea on how to solve this?
Thanks,
Eric
^ permalink raw reply
* Re: GIT get corrupted on lustre
From: Andreas Schwab @ 2012-12-24 14:48 UTC (permalink / raw)
To: Eric Chamberland; +Cc: git
In-Reply-To: <50D861EE.6020105@giref.ulaval.ca>
Eric Chamberland <Eric.Chamberland@giref.ulaval.ca> writes:
> #1) However, how can we *test* the filesystem (lustre) compatibility with
> git? (Is there a unit test we can run?)
Have you considered running git's testsuite?
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply
* Re: GIT get corrupted on lustre
From: Brian J. Murrell @ 2012-12-24 15:11 UTC (permalink / raw)
To: git
In-Reply-To: <50D861EE.6020105@giref.ulaval.ca>
[-- Attachment #1: Type: text/plain, Size: 741 bytes --]
On 12-12-24 09:08 AM, Eric Chamberland wrote:
> Hi,
Hi,
> Doing a "git clone" always work fine, but when we "git pull" or "git gc"
> or "git fsck", often (1/5) the local repository get corrupted.
Have you tried adding a "-q" to the git command line to quiet down git's
"feedback" messages?
I discovered other oddities with using git on Lustre which I described
in this thread:
http://thread.gmane.org/gmane.comp.version-control.git/208886
I found that by simply disabling the feedback (which disables the
copious SIGALRM processing) I could alleviate the issue.
I wonder if your issues are more of the same.
I filed Lustre bug LU-2276 about it at:
http://jira.whamcloud.com/browse/LU-2276
Cheers,
b.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 261 bytes --]
^ permalink raw reply
* Re: [PATCH] Python scripts audited for minimum compatible version and checks added.
From: Eric S. Raymond @ 2012-12-24 15:32 UTC (permalink / raw)
To: Pete Wyckoff; +Cc: git
In-Reply-To: <20121224133649.GA1400@padd.com>
Pete Wyckoff <pw@padd.com>:
> esr@thyrsus.com wrote on Thu, 20 Dec 2012 09:13 -0500:
> > diff --git a/git-p4.py b/git-p4.py
> > index 551aec9..ec060b4 100755
> > --- a/git-p4.py
> > +++ b/git-p4.py
> > @@ -12,6 +12,11 @@ import optparse, sys, os, marshal, subprocess, shelve
> > import tempfile, getopt, os.path, time, platform
> > import re, shutil
> >
> > +if sys.hexversion < 0x02040000:
> > + # The limiter is the subprocess module
> > + sys.stderr.write("git-p4.py: requires Python 2.4 or later.")
> > + sys.exit(1)
> > +
> > verbose = False
>
> If 2.3 does not have the subprocess module, this script will fail
> at the import, and not run your version test.
Yes, the import of subprocess should move to after the check.
> All the uses of sys.stderr.write() should probably include a
> newline. Presumably you used write instead of print to avoid
> 2to3 differences.
That is correct.
> The name of this particular script, as users would type it, is
> "git p4"; no dash and no ".py".
>
> Many of your changes have these three problems; I just picked on
> my favorite one.
Should I resubmit, or do you intend to fix these while merging?
> > diff --git a/git-remote-testgit.py b/git-remote-testgit.py
> > index 5f3ebd2..22d2eb6 100644
> > --- a/git-remote-testgit.py
> > +++ b/git-remote-testgit.py
> > @@ -31,6 +31,11 @@ from git_remote_helpers.git.exporter import GitExporter
> > from git_remote_helpers.git.importer import GitImporter
> > from git_remote_helpers.git.non_local import NonLocalGit
> >
> > +if sys.hexversion < 0x01050200:
> > + # os.makedirs() is the limiter
> > + sys.stderr.write("git-remote-testgit.py: requires Python 1.5.2 or later.")
> > + sys.exit(1)
> > +
>
> This one, though, is a bit of a lie because git_remote_helpers
> needs 2.4, and you add that version enforcement in the library.
Agreed. The goal here was simply to have the depedencies of the individual
scripts be clearly documented, and establish a practice for future
submitters to emulate.
> I assume what you're trying to do here is to make the
> version-related failures more explicit, rather than have users
> parse an ImportError traceback, e.g.
See above. At least half the point is making our dependencies
explicit rather than implicit, so we can make better policy
decisions.
> But what about the high-end of the version range? I'm pretty
> sure most of these scripts will throw syntax errors on >= 3.0,
> how should we catch that before users see it?
That's a problem for another day, when 3.x is more widely deployed.
I'd be willing to run 2to3 on these scripts and check forward
compatibility.
--
<a href="http://www.catb.org/~esr/">Eric S. Raymond</a>
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Jeff King @ 2012-12-24 15:34 UTC (permalink / raw)
To: Nguyen Thai Ngoc Duy; +Cc: Seth Robertson, Woody Wu, git
In-Reply-To: <CACsJy8Dt94XLSa8Sg3T0URJYG9cHD_sUySuhm3Vu4ESy-VrXag@mail.gmail.com>
On Mon, Dec 24, 2012 at 06:16:05PM +0700, Nguyen Thai Ngoc Duy wrote:
> > The reason that git does not bother storing "where did I start this
> > branch" is that it is usually not useful. The right question is usually
> > "what is the merge base". There are exceptions, of course (e.g., if you
> > are asking something like "what work did I do while checked out on the
> > 'foo' branch"). But for merging and rebasing, I think the computed
> > merge-base is much more likely to do what people want.
>
> Rebasing is exactly why I want this. Merge base works most of the time
> until you rewrite upstream (which I do sometimes).
True, although wouldn't you generally want to rebase it on top of the
rewritten upstream in that case (which is what "pull --rebase" will do,
by scanning the reflog for the last version of the upstream that you
actually built on).
> There are also cases when I create a branch without upstream, or when
> upstream is renamed. Still, making "rebase -i --topic" == "rebase -i
> $(git merge-base HEAD @{upstream})" would be cool.
Yeah. I usually just do "rebase -i @{upstream}" which picks the same
commits, but moves to the updated version of upstream (IOW, I both
rewrite and move forward at the same time). But there is value in
rewriting without moving forward in many workflows. That seems like a
sensible feature to me.
-Peff
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Martin von Zweigbergk @ 2012-12-24 17:24 UTC (permalink / raw)
To: Woody Wu; +Cc: Seth Robertson, git
In-Reply-To: <20121224073103.GA10793@zuhnb712>
On Sun, Dec 23, 2012 at 11:31 PM, Woody Wu <narkewoody@gmail.com> wrote:
> On Sun, Dec 23, 2012 at 11:09:58PM -0500, Seth Robertson wrote:
>>
>> In message <20121224035825.GA17203@zuhnb712>, Woody Wu writes:
>>
>> How can I find out what's the staring reference point (a commit number
>> or tag name) of a locally created branch? I can use gitk to find out it
>> but this method is slow, I think there might be a command line to do it
>> quickly.
>>
>> The answer is more complex than you probably suspected.
>>
>> Technically, `git log --oneline mybranch | tail -n 1` will tell you
>> the starting point of any branch. But...I'm sure that isn't what you
>> want to know.
>>
>> You want to know "what commit was I at when I typed `git branch
>> mybranch`"?
>
> Yes, this is exactly I want to know.
>
>>The problem is git doesn't record this information and
>> doesn't have the slightest clue.
>>
>> But, you say, I can use `gitk` and see it. See? Right there. That
>> isn't (necessarily) the "starting point" of the branch, it is the
>> place where your branch diverged from some other branch. Git is
>> actually quite able to tell you when the last time your branch
>> diverged from some other branch. `git merge-base mybranch master`
>> will tell you this, and is probably the answer you were looking for.
>
> This is not working to me since I have more than one local branch that
> diverged from the master, and in fact, the branch I have in question was
> diverged from another local branch.
As Jeff mentions in a later message, "git pull --rebase" would
probably do what you want. It works with local branches too.
I once tried to add the same cleverness that "git pull --rebase"
directly in "git rebase" [1], but there were several issues with those
patches, one of was regarding the performance ("git pull --rebase" can
be equally slow, but since it often involves network, users probably
rarely notice). I think it would be nice to at least add it as an
option to "git rebase" some day. Until then, "git pull --rebase" works
fine.
[1] http://thread.gmane.org/gmane.comp.version-control.git/166710
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Junio C Hamano @ 2012-12-24 19:10 UTC (permalink / raw)
To: Nguyen Thai Ngoc Duy; +Cc: Tomas Carnecky, Seth Robertson, Woody Wu, git
In-Reply-To: <CACsJy8DMGrHqgY7himfJA-6f5beZ83Pje+-ex62LQOAARWh=Nw@mail.gmail.com>
Nguyen Thai Ngoc Duy <pclouds@gmail.com> writes:
> On Mon, Dec 24, 2012 at 1:27 PM, Junio C Hamano <gitster@pobox.com> wrote:
>> Nguyen Thai Ngoc Duy <pclouds@gmail.com> writes:
>>
>>> On Mon, Dec 24, 2012 at 12:34 PM, Tomas Carnecky
>>> <tomas.carnecky@gmail.com> wrote:
>>>>> Maybe we should store this information. reflog is a perfect place for
>>>>> this, I think. If this information is reliably available, git rebase
>>>>> can be told to "rebase my whole branch" instead of my choosing the
>>>>> base commit for it.
>>>>
>>>> What's the starting point of the branch if I type: git branch foo <commit-ish>?
>>>
>>> You start working off <commit-ish> so I think the starting point would
>>> be <commit-ish>.
>>
>> Yeah, that sounds sensible. Don't we already have it in the reflog,
>> though?
>
> I looked briefly at reflog before writing my previous mail and noticed
> that when I create a new branch (usually using "git checkout -b branch
> ref") it does not record the base commit.
Hmph. Perhaps you are referring to something different than what I
think "the base commit" with that word.
$ git reflog mz/pick-unborn | tail -n 1
b3cf6f3 mz/pick-unborn@{3}: branch: Created from ko/master
>> What is trickier is when you later transplant it to some other base
>> (perhaps prepare a topic on 'master', realize it should better apply
>> to 'maint' and move it there). If the user did the transplanting by
>> hand, reflog would probably not have enough information, e.g. after
>>
>> $ git checkout maint^0
>> $ git log --oneline master..topic
>> $ git cherry-pick $one_of_the_commit_names_you_see_in_the_above
>> $ git cherry-pick $another_commit_name_you_see_in_the_above
>> ...
>> $ git branch -f topic
>>
>> no reflog other than HEAD@{} will tell you that you were at maint^0,
>> so the reflog of topic wouldn't know it "forked" from there, either.
>
> We could at least invalidate the recorded base in reflog and let user
> define a new one (I hope).
Please do not even think about going back and rewrite to lose
information. If the records have full information, you should be
able to reconstruct what you want from it without rewriting.
Even more importantly, wish to "invalidate" indicates that you know
at a newer point that you have more authoritative information than
the older reflog entries, so you should be able to do the moral
equivalent by writing the event as establishing a new base at that
point (e.g. "checkout -B"), and stopping at that point in the reflog
when reading, without losing the older reflog entries.
^ permalink raw reply
* Re: [PATCH] Python scripts audited for minimum compatible version and checks added.
From: Junio C Hamano @ 2012-12-24 19:12 UTC (permalink / raw)
To: esr; +Cc: Pete Wyckoff, git
In-Reply-To: <20121224153257.GA28213@thyrsus.com>
"Eric S. Raymond" <esr@thyrsus.com> writes:
> Pete Wyckoff <pw@padd.com>:
>> esr@thyrsus.com wrote on Thu, 20 Dec 2012 09:13 -0500:
>> ...
>> Many of your changes have these three problems; I just picked on
>> my favorite one.
>
> Should I resubmit, or do you intend to fix these while merging?
I'd appreciate a re-roll, perhaps in a few days after the dust
settles.
Thanks, both, for the patch and the review.
^ permalink raw reply
* Re: [PATCH] Python scripts audited for minimum compatible version and checks added.
From: Eric S. Raymond @ 2012-12-24 19:52 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Pete Wyckoff, git
In-Reply-To: <7v7go7nu1f.fsf@alter.siamese.dyndns.org>
Junio C Hamano <gitster@pobox.com>:
> > Should I resubmit, or do you intend to fix these while merging?
>
> I'd appreciate a re-roll, perhaps in a few days after the dust
> settles.
You'll get it.
It will take a little longer than it otherwise might have because I'm
in the middle of straightening out the mess around cvsps and git-cvsimport,
which is deeper and nastier than I realized.
It turns out that one of the options git-cvsimport depends on, -A, has
been broken (leading to incorrect conversions of branchy repos) since
2006 if not earlier; I'm removing it outright.
Thus, the version of git-cvsimport in the git-tree will die with an
error calling cvsps 3.x - but since what it was doing before was actually
mangling users' repositories this is no great loss.
I'm going to have to shoot the existing implementation of
git-cvsimport through the head and rewrite it. This won't be
difficult; I already have a proof-of-concept in 126 lines of Python,
which is a big improvement over the 1179 lines of Perl in the existing
version. Most of the vanished bulk is CVS client code for fetching
logs and files, which is now done better and faster inside cvsps.
--
<a href="http://www.catb.org/~esr/">Eric S. Raymond</a>
^ permalink raw reply
* [LHF] making t5000 "tar xf" tests more lenient
From: Junio C Hamano @ 2012-12-24 20:49 UTC (permalink / raw)
To: git
I've been running testsuite on a few platforms that are unfamiliar
to me, and was bitten by BSD implementation of tar that do not grok
the extended pax headers. I've already fixed one in t9502 [*1*]
where we produce a tarball with "git archive" and then try to
validate it with the platform implementation of "tar" so that the
test won't barf when it sees the extended pax header.
t5000 is littered with similar tests that break unnecessarily with
BSD implementations. I think what it wants to test are:
- "archive" produces tarball, and "tar" can extract from it. If
your "tar" does not understand pax header, you may get it as an
extra file that shouldn't be there, but that should not cause the
test to fail---in real life, people without a pax-aware "tar"
will just ignore and remove the header and can go on.
- "get-tar-commmit-id" can inspect a tarball produced by "archive"
to recover the object name of the commit even on a platform
without a pax-aware "tar".
Perhaps t5000 can be restructured like so:
- create a tarball with the commit-id and test with
"get-tar-commit-id" to validate it; also create a tarball out of
a tree to make sure it does not have commit-id and check with
"get-tar-commit-id". Do this on any and all platform, even on
the ones without a pax-aware "tar".
- check platform implementation of "tar" early to see if extracting
a simple output from "git archive" results in an extra pax header
file. If so, remember this fact and produce any and all tarballs
used in the remainder of the test by forcing ^{tree}.
so that people on platforms without pax-aware "tar" do not have to
install GNU tar only to pass this test.
It would be a good exercise during the holiday week for somebody on
BSD (it seems NetBSD is more troublesome than OpenBSD) to come up
with a patch to help users on these platforms.
Thanks.
[Footnote]
*1* http://thread.gmane.org/gmane.comp.version-control.git/211803
^ permalink raw reply
* Re: Find the starting point of a local branch
From: Nguyen Thai Ngoc Duy @ 2012-12-25 1:09 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Tomas Carnecky, Seth Robertson, Woody Wu, git
In-Reply-To: <7vbodjnu5c.fsf@alter.siamese.dyndns.org>
On Tue, Dec 25, 2012 at 2:10 AM, Junio C Hamano <gitster@pobox.com> wrote:
>> I looked briefly at reflog before writing my previous mail and noticed
>> that when I create a new branch (usually using "git checkout -b branch
>> ref") it does not record the base commit.
>
> Hmph. Perhaps you are referring to something different than what I
> think "the base commit" with that word.
>
> $ git reflog mz/pick-unborn | tail -n 1
> b3cf6f3 mz/pick-unborn@{3}: branch: Created from ko/master
No you're right. My reflogs must be pruned. Creating a new branch does
produce that entry.
>> We could at least invalidate the recorded base in reflog and let user
>> define a new one (I hope).
>
> Please do not even think about going back and rewrite to lose
> information. If the records have full information, you should be
> able to reconstruct what you want from it without rewriting.
>
> Even more importantly, wish to "invalidate" indicates that you know
> at a newer point that you have more authoritative information than
> the older reflog entries, so you should be able to do the moral
> equivalent by writing the event as establishing a new base at that
> point (e.g. "checkout -B"), and stopping at that point in the reflog
> when reading, without losing the older reflog entries.
Exactly. And when we prune the reflog, we could add the base back so
the base is always in reflog.
--
Duy
^ permalink raw reply
* [PATCH] t9200: let "cvs init" create the test repository
From: Junio C Hamano @ 2012-12-25 1:09 UTC (permalink / raw)
To: git
Some platforms (e.g. NetBSD 6.3) seem to configure their CVS to
allow "cvs init" in an existing directory only to members of
"cvsadmin".
Instead of preparing an empty directory and then running "cvs init"
on it, let's run "cvs init" and let it create the necessary
directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
t/t9200-git-cvsexportcommit.sh | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/t/t9200-git-cvsexportcommit.sh b/t/t9200-git-cvsexportcommit.sh
index b59be9a..c5368a3 100755
--- a/t/t9200-git-cvsexportcommit.sh
+++ b/t/t9200-git-cvsexportcommit.sh
@@ -25,8 +25,9 @@ GIT_DIR=$PWD/.git
export CVSROOT CVSWORK GIT_DIR
rm -rf "$CVSROOT" "$CVSWORK"
-mkdir "$CVSROOT" &&
+
cvs init &&
+test -d "$CVSROOT" &&
cvs -Q co -d "$CVSWORK" . &&
echo >empty &&
git add empty &&
^ permalink raw reply related
* Re: GIT get corrupted on lustre
From: Greg Troxel @ 2012-12-25 1:11 UTC (permalink / raw)
To: Eric Chamberland; +Cc: git
In-Reply-To: <50D861EE.6020105@giref.ulaval.ca>
[-- Attachment #1: Type: text/plain, Size: 617 bytes --]
we are using git since may and all is working fine for all of us
(almost 20 people) on our workstations. However, when we clone our
repositories to the cluster, only and only there
we are having many problems similiar to this post:
What filesystem tests have you run on lustre? I would run every test
you can find, and lustre should have a robust test suite. It's really
hard to be certain, but given how many filesystems git is used with,
your experience points to a lustre bug.
I would also suggest using ktrace/ktruss/strace and perhaps poring over
the logs to see if you can spot any bad behavior.
[-- Attachment #2: Type: application/pgp-signature, Size: 194 bytes --]
^ permalink raw reply
* Re: [PATCH] t9200: let "cvs init" create the test repository
From: Junio C Hamano @ 2012-12-25 1:49 UTC (permalink / raw)
To: git
In-Reply-To: <7vr4mflyxu.fsf@alter.siamese.dyndns.org>
Junio C Hamano <gitster@pobox.com> writes:
> Some platforms (e.g. NetBSD 6.3) seem to configure their CVS to
s/6.3/6.0/; sorry for the noise.
^ permalink raw reply
* Re: Using Eclipse git plugin
From: Robin Rosenberg @ 2012-12-25 21:01 UTC (permalink / raw)
To: Dennis Putnam; +Cc: git
In-Reply-To: <50D72E73.8070501@bellsouth.net>
----- Ursprungligt meddelande -----
> This may be more of an Eclipse question than a git question but
> hopefully someone on this list knows both. I now have a working git
> central repository (on Linux) and a local repository clone (on
> Windows).
> I can see and edit my files in Eclipse, commit them and push them to
> the
> remote repository. The problem I am having now is developing my code
> in
> Eclipse. It seems I can no longer run the code as the 'Run as
> Application' menu item is missing. How do I test my code now? TIA.
You're better off visiting the some Eclipse forums for this. I see
no reason to suspect this has anything to do Git or even EGit. You should
check the Error log view for hints errors hidden from view. It can also
be the case that your selection is not a Java class with a test case or
main method.
If it is EGit-related, http://www.eclipse.org/egit/support contains more
tips on getting help.
-- robin
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox