* [PATCH 15/36] attr: add counted string version of git_check_attr()
From: Stefan Beller @ 2016-10-22 23:32 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Often a potential caller has <path, pathlen> pair that
represents the path it wants to ask attributes for; when
path[pathlen] is not NUL, the caller has to xmemdupz()
only to call git_check_attr().
Add git_check_attr_counted() that takes such a counted
string instead of "const char *path".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 23 ++++++++++++++---------
attr.h | 1 +
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/attr.c b/attr.c
index d427798..9bec243 100644
--- a/attr.c
+++ b/attr.c
@@ -734,20 +734,19 @@ static int attr_check_is_dynamic(const struct git_attr_check *check)
* check_all_attr. If num is non-zero, only attributes in check[] are
* collected. Otherwise all attributes are collected.
*/
-static void collect_some_attrs(const char *path, int num,
+static void collect_some_attrs(const char *path, int pathlen, int num,
struct git_attr_check_elem *check)
{
struct attr_stack *stk;
- int i, pathlen, rem, dirlen;
+ int i, rem, dirlen;
const char *cp, *last_slash = NULL;
int basename_offset;
- for (cp = path; *cp; cp++) {
+ for (cp = path; cp < path + pathlen; cp++) {
if (*cp == '/' && cp[1])
last_slash = cp;
}
- pathlen = cp - path;
if (last_slash) {
basename_offset = last_slash + 1 - path;
dirlen = last_slash - path;
@@ -778,12 +777,12 @@ static void collect_some_attrs(const char *path, int num,
rem = fill(path, pathlen, basename_offset, stk, rem);
}
-static int git_check_attrs(const char *path, int num,
+static int git_check_attrs(const char *path, int pathlen, int num,
struct git_attr_check_elem *check)
{
int i;
- collect_some_attrs(path, num, check);
+ collect_some_attrs(path, pathlen, num, check);
for (i = 0; i < num; i++) {
const char *value = check_all_attr[check[i].attr->attr_nr].value;
@@ -800,7 +799,7 @@ void git_all_attrs(const char *path, struct git_attr_check *check)
int i;
git_attr_check_clear(check);
- collect_some_attrs(path, 0, NULL);
+ collect_some_attrs(path, strlen(path), 0, NULL);
for (i = 0; i < attr_nr; i++) {
const char *name = check_all_attr[i].attr->name;
@@ -825,10 +824,16 @@ void git_attr_set_direction(enum git_attr_direction new, struct index_state *ist
use_index = istate;
}
-int git_check_attr(const char *path, struct git_attr_check *check)
+int git_check_attr_counted(const char *path, int pathlen,
+ struct git_attr_check *check)
{
check->finalized = 1;
- return git_check_attrs(path, check->check_nr, check->check);
+ return git_check_attrs(path, pathlen, check->check_nr, check->check);
+}
+
+int git_check_attr(const char *path, struct git_attr_check *check)
+{
+ return git_check_attr_counted(path, strlen(path), check);
}
struct git_attr_check *git_attr_check_initl(const char *one, ...)
diff --git a/attr.h b/attr.h
index 506db0c..c84f164 100644
--- a/attr.h
+++ b/attr.h
@@ -38,6 +38,7 @@ struct git_attr_check {
extern struct git_attr_check *git_attr_check_initl(const char *, ...);
extern int git_check_attr(const char *path, struct git_attr_check *);
+extern int git_check_attr_counted(const char *, int, struct git_attr_check *);
extern struct git_attr_check *git_attr_check_alloc(void);
extern struct git_attr_check_elem *git_attr_check_append(struct git_attr_check *, const struct git_attr *);
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 21/36] attr.c: rename a local variable check
From: Stefan Beller @ 2016-10-22 23:32 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Throughout this series, we are trying to use "check" to name an
instance of "git_attr_check" structure; let's rename a "check" that
refers to an array whose elements are git_attr_check_elem to avoid
confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/attr.c b/attr.c
index 9ed4825..7869277 100644
--- a/attr.c
+++ b/attr.c
@@ -682,12 +682,12 @@ static int macroexpand_one(int attr_nr, int rem);
static int fill_one(const char *what, struct match_attr *a, int rem)
{
- struct git_attr_check_elem *check = check_all_attr;
+ struct git_attr_check_elem *celem = check_all_attr;
int i;
for (i = a->num_attr - 1; 0 < rem && 0 <= i; i--) {
struct git_attr *attr = a->state[i].attr;
- const char **n = &(check[attr->attr_nr].value);
+ const char **n = &(celem[attr->attr_nr].value);
const char *v = a->state[i].setto;
if (*n == ATTR__UNKNOWN) {
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 19/36] attr.c: add push_stack() helper
From: Stefan Beller @ 2016-10-22 23:32 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
There are too many repetitious "I have this new attr_stack element;
push it at the top of the stack" sequence. The new helper function
push_stack() gives us a way to express what is going on at these
places, and as a side effect, halves the number of times we mention
the attr_stack global variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 71 +++++++++++++++++++++++++++++++-----------------------------------
1 file changed, 33 insertions(+), 38 deletions(-)
diff --git a/attr.c b/attr.c
index eba582b..34c297d 100644
--- a/attr.c
+++ b/attr.c
@@ -521,6 +521,18 @@ static int git_attr_system(void)
static GIT_PATH_FUNC(git_path_info_attributes, INFOATTRIBUTES_FILE)
+static void push_stack(struct attr_stack **attr_stack_p,
+ struct attr_stack *elem, char *origin, size_t originlen)
+{
+ if (elem) {
+ elem->origin = origin;
+ if (origin)
+ elem->originlen = originlen;
+ elem->prev = *attr_stack_p;
+ *attr_stack_p = elem;
+ }
+}
+
static void bootstrap_attr_stack(void)
{
struct attr_stack *elem;
@@ -528,52 +540,35 @@ static void bootstrap_attr_stack(void)
if (attr_stack)
return;
- elem = read_attr_from_array(builtin_attr);
- elem->origin = NULL;
- elem->prev = attr_stack;
- attr_stack = elem;
-
- if (git_attr_system()) {
- elem = read_attr_from_file(git_etc_gitattributes(), 1);
- if (elem) {
- elem->origin = NULL;
- elem->prev = attr_stack;
- attr_stack = elem;
- }
- }
+ push_stack(&attr_stack, read_attr_from_array(builtin_attr), NULL, 0);
+
+ if (git_attr_system())
+ push_stack(&attr_stack,
+ read_attr_from_file(git_etc_gitattributes(), 1),
+ NULL, 0);
if (!git_attributes_file)
git_attributes_file = xdg_config_home("attributes");
- if (git_attributes_file) {
- elem = read_attr_from_file(git_attributes_file, 1);
- if (elem) {
- elem->origin = NULL;
- elem->prev = attr_stack;
- attr_stack = elem;
- }
- }
+ if (git_attributes_file)
+ push_stack(&attr_stack,
+ read_attr_from_file(git_attributes_file, 1),
+ NULL, 0);
if (!is_bare_repository() || direction == GIT_ATTR_INDEX) {
elem = read_attr(GITATTRIBUTES_FILE, 1);
- elem->origin = xstrdup("");
- elem->originlen = 0;
- elem->prev = attr_stack;
- attr_stack = elem;
+ push_stack(&attr_stack, elem, xstrdup(""), 0);
debug_push(elem);
}
elem = read_attr_from_file(git_path_info_attributes(), 1);
if (!elem)
elem = xcalloc(1, sizeof(*elem));
- elem->origin = NULL;
- elem->prev = attr_stack;
- attr_stack = elem;
+ push_stack(&attr_stack, elem, NULL, 0);
}
static void prepare_attr_stack(const char *path, int dirlen)
{
struct attr_stack *elem, *info;
- int len;
const char *cp;
/*
@@ -633,20 +628,21 @@ static void prepare_attr_stack(const char *path, int dirlen)
assert(attr_stack->origin);
while (1) {
- len = strlen(attr_stack->origin);
+ size_t len = strlen(attr_stack->origin);
+ char *origin;
+
if (dirlen <= len)
break;
cp = memchr(path + len + 1, '/', dirlen - len - 1);
if (!cp)
cp = path + dirlen;
- strbuf_add(&pathbuf, path, cp - path);
- strbuf_addch(&pathbuf, '/');
- strbuf_addstr(&pathbuf, GITATTRIBUTES_FILE);
+ strbuf_addf(&pathbuf,
+ "%.*s/%s", (int)(cp - path), path,
+ GITATTRIBUTES_FILE);
elem = read_attr(pathbuf.buf, 0);
strbuf_setlen(&pathbuf, cp - path);
- elem->origin = strbuf_detach(&pathbuf, &elem->originlen);
- elem->prev = attr_stack;
- attr_stack = elem;
+ origin = strbuf_detach(&pathbuf, &len);
+ push_stack(&attr_stack, elem, origin, len);
debug_push(elem);
}
@@ -656,8 +652,7 @@ static void prepare_attr_stack(const char *path, int dirlen)
/*
* Finally push the "info" one at the top of the stack.
*/
- info->prev = attr_stack;
- attr_stack = info;
+ push_stack(&attr_stack, info, NULL, 0);
}
static int path_matches(const char *pathname, int pathlen,
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 18/36] attr: support quoting pathname patterns in C style
From: Stefan Beller @ 2016-10-22 23:32 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Full pattern must be quoted. So 'pat"t"ern attr' will give exactly
'pat"t"ern', not 'pattern'. Also clarify that leading whitespaces are
not part of the pattern and document comment syntax.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
Documentation/gitattributes.txt | 8 +++++---
attr.c | 15 +++++++++++++--
t/t0003-attributes.sh | 26 ++++++++++++++++++++++++++
3 files changed, 44 insertions(+), 5 deletions(-)
diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt
index 7aff940..8a061af 100644
--- a/Documentation/gitattributes.txt
+++ b/Documentation/gitattributes.txt
@@ -21,9 +21,11 @@ Each line in `gitattributes` file is of form:
pattern attr1 attr2 ...
That is, a pattern followed by an attributes list,
-separated by whitespaces. When the pattern matches the
-path in question, the attributes listed on the line are given to
-the path.
+separated by whitespaces. Leading and trailing whitespaces are
+ignored. Lines that begin with '#' are ignored. Patterns
+that begin with a double quote are quoted in C style.
+When the pattern matches the path in question, the attributes
+listed on the line are given to the path.
Each attribute can be in one of these states for a given path:
diff --git a/attr.c b/attr.c
index 659dc41..eba582b 100644
--- a/attr.c
+++ b/attr.c
@@ -13,6 +13,7 @@
#include "attr.h"
#include "dir.h"
#include "utf8.h"
+#include "quote.h"
const char git_attr__true[] = "(builtin)true";
const char git_attr__false[] = "\0(builtin)false";
@@ -225,12 +226,21 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
const char *cp, *name, *states;
struct match_attr *res = NULL;
int is_macro;
+ struct strbuf pattern = STRBUF_INIT;
cp = line + strspn(line, blank);
if (!*cp || *cp == '#')
return NULL;
name = cp;
- namelen = strcspn(name, blank);
+
+ if (*cp == '"' && !unquote_c_style(&pattern, name, &states)) {
+ name = pattern.buf;
+ namelen = pattern.len;
+ } else {
+ namelen = strcspn(name, blank);
+ states = name + namelen;
+ }
+
if (strlen(ATTRIBUTE_MACRO_PREFIX) < namelen &&
starts_with(name, ATTRIBUTE_MACRO_PREFIX)) {
if (!macro_ok) {
@@ -250,7 +260,6 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
else
is_macro = 0;
- states = name + namelen;
states += strspn(states, blank);
/* First pass to count the attr_states */
@@ -293,9 +302,11 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
cannot_trust_maybe_real = 1;
}
+ strbuf_release(&pattern);
return res;
fail_return:
+ strbuf_release(&pattern);
free(res);
return NULL;
}
diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh
index f0fbb42..f19ae4f 100755
--- a/t/t0003-attributes.sh
+++ b/t/t0003-attributes.sh
@@ -13,10 +13,31 @@ attr_check () {
test_line_count = 0 err
}
+attr_check_quote () {
+
+ path="$1"
+ quoted_path="$2"
+ expect="$3"
+
+ git check-attr test -- "$path" >actual &&
+ echo "\"$quoted_path\": test: $expect" >expect &&
+ test_cmp expect actual
+
+}
+
+test_expect_success 'open-quoted pathname' '
+ echo "\"a test=a" >.gitattributes &&
+ test_must_fail attr_check a a
+'
+
+
test_expect_success 'setup' '
mkdir -p a/b/d a/c b &&
(
echo "[attr]notest !test"
+ echo "\" d \" test=d"
+ echo " e test=e"
+ echo " e\" test=e"
echo "f test=f"
echo "a/i test=a/i"
echo "onoff test -test"
@@ -69,6 +90,11 @@ test_expect_success 'command line checks' '
'
test_expect_success 'attribute test' '
+
+ attr_check " d " d &&
+ attr_check e e &&
+ attr_check_quote e\" e\\\" e &&
+
attr_check f f &&
attr_check a/f f &&
attr_check a/c/f f &&
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 17/36] attr: expose validity check for attribute names
From: Stefan Beller @ 2016-10-22 23:32 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Export attr_name_valid() function, and a helper function that
returns the message to be given when a given <name, len> pair
is not a good name for an attribute.
We could later update the message to exactly spell out what the
rules for a good attribute name are, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 39 +++++++++++++++++++++++++--------------
attr.h | 3 +++
2 files changed, 28 insertions(+), 14 deletions(-)
diff --git a/attr.c b/attr.c
index 90dbacd..659dc41 100644
--- a/attr.c
+++ b/attr.c
@@ -59,23 +59,38 @@ static unsigned hash_name(const char *name, int namelen)
return val;
}
-static int invalid_attr_name(const char *name, int namelen)
+int attr_name_valid(const char *name, size_t namelen)
{
/*
* Attribute name cannot begin with '-' and must consist of
* characters from [-A-Za-z0-9_.].
*/
if (namelen <= 0 || *name == '-')
- return -1;
+ return 0;
while (namelen--) {
char ch = *name++;
if (! (ch == '-' || ch == '.' || ch == '_' ||
('0' <= ch && ch <= '9') ||
('a' <= ch && ch <= 'z') ||
('A' <= ch && ch <= 'Z')) )
- return -1;
+ return 0;
}
- return 0;
+ return 1;
+}
+
+void invalid_attr_name_message(struct strbuf *err, const char *name, int len)
+{
+ strbuf_addf(err, _("%.*s is not a valid attribute name"),
+ len, name);
+}
+
+static void report_invalid_attr(const char *name, size_t len,
+ const char *src, int lineno)
+{
+ struct strbuf err = STRBUF_INIT;
+ invalid_attr_name_message(&err, name, len);
+ fprintf(stderr, "%s: %s:%d\n", err.buf, src, lineno);
+ strbuf_release(&err);
}
struct git_attr *git_attr_counted(const char *name, size_t len)
@@ -90,7 +105,7 @@ struct git_attr *git_attr_counted(const char *name, size_t len)
return a;
}
- if (invalid_attr_name(name, len))
+ if (!attr_name_valid(name, len))
return NULL;
FLEX_ALLOC_MEM(a, name, name, len);
@@ -176,17 +191,15 @@ static const char *parse_attr(const char *src, int lineno, const char *cp,
cp++;
len--;
}
- if (invalid_attr_name(cp, len)) {
- fprintf(stderr,
- "%.*s is not a valid attribute name: %s:%d\n",
- len, cp, src, lineno);
+ if (!attr_name_valid(cp, len)) {
+ report_invalid_attr(cp, len, src, lineno);
return NULL;
}
} else {
/*
* As this function is always called twice, once with
* e == NULL in the first pass and then e != NULL in
- * the second pass, no need for invalid_attr_name()
+ * the second pass, no need for attr_name_valid()
* check here.
*/
if (*cp == '-' || *cp == '!') {
@@ -229,10 +242,8 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
name += strlen(ATTRIBUTE_MACRO_PREFIX);
name += strspn(name, blank);
namelen = strcspn(name, blank);
- if (invalid_attr_name(name, namelen)) {
- fprintf(stderr,
- "%.*s is not a valid attribute name: %s:%d\n",
- namelen, name, src, lineno);
+ if (!attr_name_valid(name, namelen)) {
+ report_invalid_attr(name, namelen, src, lineno);
goto fail_return;
}
}
diff --git a/attr.h b/attr.h
index bcedf92..40abc16 100644
--- a/attr.h
+++ b/attr.h
@@ -13,6 +13,9 @@ extern struct git_attr *git_attr(const char *);
/* The same, but with counted string */
extern struct git_attr *git_attr_counted(const char *, size_t);
+extern int attr_name_valid(const char *name, size_t namelen);
+extern void invalid_attr_name_message(struct strbuf *, const char *, int);
+
/* Internal use */
extern const char git_attr__true[];
extern const char git_attr__false[];
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 16/36] attr: add counted string version of git_attr()
From: Stefan Beller @ 2016-10-22 23:32 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Often a potential caller has <name, namelen> pair that
represents the name it wants to create an attribute out of.
When name[namelen] is not NUL, the caller has to xmemdupz()
only to call git_attr().
Add git_attr_counted() that takes such a counted string instead of
"const char *name".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 8 ++++----
attr.h | 5 ++++-
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/attr.c b/attr.c
index 9bec243..90dbacd 100644
--- a/attr.c
+++ b/attr.c
@@ -78,7 +78,7 @@ static int invalid_attr_name(const char *name, int namelen)
return 0;
}
-static struct git_attr *git_attr_internal(const char *name, int len)
+struct git_attr *git_attr_counted(const char *name, size_t len)
{
unsigned hval = hash_name(name, len);
unsigned pos = hval % HASHSIZE;
@@ -109,7 +109,7 @@ static struct git_attr *git_attr_internal(const char *name, int len)
struct git_attr *git_attr(const char *name)
{
- return git_attr_internal(name, strlen(name));
+ return git_attr_counted(name, strlen(name));
}
/* What does a matched pattern decide? */
@@ -199,7 +199,7 @@ static const char *parse_attr(const char *src, int lineno, const char *cp,
else {
e->setto = xmemdupz(equals + 1, ep - equals - 1);
}
- e->attr = git_attr_internal(cp, len);
+ e->attr = git_attr_counted(cp, len);
}
return ep + strspn(ep, blank);
}
@@ -254,7 +254,7 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
sizeof(struct attr_state) * num_attr +
(is_macro ? 0 : namelen + 1));
if (is_macro) {
- res->u.attr = git_attr_internal(name, namelen);
+ res->u.attr = git_attr_counted(name, namelen);
res->u.attr->maybe_macro = 1;
} else {
char *p = (char *)&(res->state[num_attr]);
diff --git a/attr.h b/attr.h
index c84f164..bcedf92 100644
--- a/attr.h
+++ b/attr.h
@@ -8,7 +8,10 @@ struct git_attr;
* Given a string, return the gitattribute object that
* corresponds to it.
*/
-struct git_attr *git_attr(const char *);
+extern struct git_attr *git_attr(const char *);
+
+/* The same, but with counted string */
+extern struct git_attr *git_attr_counted(const char *, size_t);
/* Internal use */
extern const char git_attr__true[];
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 11/36] attr: (re)introduce git_check_attr() and struct git_attr_check
From: Stefan Beller @ 2016-10-22 23:32 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
A common pattern to check N attributes for many paths is to
(1) prepare an array A of N git_attr_check_elem items;
(2) call git_attr() to intern the N attribute names and fill A;
(3) repeatedly call git_check_attrs() for path with N and A;
A look-up for these N attributes for a single path P scans the
entire attr_stack, starting from the .git/info/attributes file and
then .gitattributes file in the directory the path P is in, going
upwards to find .gitattributes file found in parent directories.
An earlier commit 06a604e6 (attr: avoid heavy work when we know the
specified attr is not defined, 2014-12-28) tried to optimize out
this scanning for one trivial special case: when the attribute being
sought is known not to exist, we do not have to scan for it. While
this may be a cheap and effective heuristic, it would not work well
when N is (much) more than 1.
What we would want is a more customized way to skip irrelevant
entries in the attribute stack, and the definition of irrelevance
is tied to the set of attributes passed to git_check_attrs() call,
i.e. the set of attributes being sought. The data necessary for
this optimization needs to live alongside the set of attributes, but
a simple array of git_attr_check_elem simply does not have any place
for that.
Introduce "struct git_attr_check" that contains N, the number of
attributes being sought, and A, the array that holds N
git_attr_check_elem items, and a function git_check_attr() that
takes a path P and this structure as its parameters. This structure
can later be extended to hold extra data necessary for optimization.
Also, to make it easier to write the first two steps in common
cases, introduce git_attr_check_initl() helper function, which takes
a NULL-terminated list of attribute names and initialize this
structure.
As an illustration of this new API, convert archive.c that asks for
export-subst and export-ignore attributes for each paths.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
archive.c | 24 ++++++------------------
attr.c | 34 ++++++++++++++++++++++++++++++++++
attr.h | 9 +++++++++
3 files changed, 49 insertions(+), 18 deletions(-)
diff --git a/archive.c b/archive.c
index 2dc8d6c..11e3951 100644
--- a/archive.c
+++ b/archive.c
@@ -87,19 +87,6 @@ void *sha1_file_to_archive(const struct archiver_args *args,
return buffer;
}
-static void setup_archive_check(struct git_attr_check_elem *check)
-{
- static struct git_attr *attr_export_ignore;
- static struct git_attr *attr_export_subst;
-
- if (!attr_export_ignore) {
- attr_export_ignore = git_attr("export-ignore");
- attr_export_subst = git_attr("export-subst");
- }
- check[0].attr = attr_export_ignore;
- check[1].attr = attr_export_subst;
-}
-
struct directory {
struct directory *up;
struct object_id oid;
@@ -123,7 +110,7 @@ static int write_archive_entry(const unsigned char *sha1, const char *base,
struct archiver_context *c = context;
struct archiver_args *args = c->args;
write_archive_entry_fn_t write_entry = c->write_entry;
- struct git_attr_check_elem check[2];
+ static struct git_attr_check *check;
const char *path_without_prefix;
int err;
@@ -137,11 +124,12 @@ static int write_archive_entry(const unsigned char *sha1, const char *base,
strbuf_addch(&path, '/');
path_without_prefix = path.buf + args->baselen;
- setup_archive_check(check);
- if (!git_check_attrs(path_without_prefix, ARRAY_SIZE(check), check)) {
- if (ATTR_TRUE(check[0].value))
+ if (!check)
+ check = git_attr_check_initl("export-ignore", "export-subst", NULL);
+ if (!git_check_attr(path_without_prefix, check)) {
+ if (ATTR_TRUE(check->check[0].value))
return 0;
- args->convert = ATTR_TRUE(check[1].value);
+ args->convert = ATTR_TRUE(check->check[1].value);
}
if (S_ISDIR(mode) || S_ISGITLINK(mode)) {
diff --git a/attr.c b/attr.c
index c99e23a..861e1a2 100644
--- a/attr.c
+++ b/attr.c
@@ -829,3 +829,37 @@ void git_attr_set_direction(enum git_attr_direction new, struct index_state *ist
drop_attr_stack();
use_index = istate;
}
+
+int git_check_attr(const char *path, struct git_attr_check *check)
+{
+ return git_check_attrs(path, check->check_nr, check->check);
+}
+
+struct git_attr_check *git_attr_check_initl(const char *one, ...)
+{
+ struct git_attr_check *check;
+ int cnt;
+ va_list params;
+ const char *param;
+
+ va_start(params, one);
+ for (cnt = 1; (param = va_arg(params, const char *)) != NULL; cnt++)
+ ;
+ va_end(params);
+ check = xcalloc(1,
+ sizeof(*check) + cnt * sizeof(*(check->check)));
+ check->check_nr = cnt;
+ check->check = (struct git_attr_check_elem *)(check + 1);
+
+ check->check[0].attr = git_attr(one);
+ va_start(params, one);
+ for (cnt = 1; cnt < check->check_nr; cnt++) {
+ param = va_arg(params, const char *);
+ if (!param)
+ die("BUG: counted %d != ended at %d",
+ check->check_nr, cnt);
+ check->check[cnt].attr = git_attr(param);
+ }
+ va_end(params);
+ return check;
+}
diff --git a/attr.h b/attr.h
index dd3c4a3..3fd8690 100644
--- a/attr.h
+++ b/attr.h
@@ -29,6 +29,15 @@ struct git_attr_check_elem {
const char *value;
};
+struct git_attr_check {
+ int check_nr;
+ int check_alloc;
+ struct git_attr_check_elem *check;
+};
+
+extern struct git_attr_check *git_attr_check_initl(const char *, ...);
+extern int git_check_attr(const char *path, struct git_attr_check *);
+
/*
* Return the name of the attribute represented by the argument. The
* return value is a pointer to a null-delimited string that is part
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 14/36] attr: retire git_check_attrs() API
From: Stefan Beller @ 2016-10-22 23:32 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Since nobody uses the old API, make it file-scope static, and update
the documentation to describe the new API.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
Documentation/technical/api-gitattributes.txt | 82 ++++++++++++++++++---------
attr.c | 3 +-
attr.h | 2 -
3 files changed, 56 insertions(+), 31 deletions(-)
diff --git a/Documentation/technical/api-gitattributes.txt b/Documentation/technical/api-gitattributes.txt
index 2602668..92fc32a 100644
--- a/Documentation/technical/api-gitattributes.txt
+++ b/Documentation/technical/api-gitattributes.txt
@@ -16,10 +16,15 @@ Data Structure
of no interest to the calling programs. The name of the
attribute can be retrieved by calling `git_attr_name()`.
+`struct git_attr_check_elem`::
+
+ This structure represents one attribute and its value.
+
`struct git_attr_check`::
- This structure represents a set of attributes to check in a call
- to `git_check_attr()` function, and receives the results.
+ This structure represents a collection of `git_attr_check_elem`.
+ It is passed to `git_check_attr()` function, specifying the
+ attributes to check, and receives their values.
Attribute Values
@@ -48,49 +53,51 @@ value of the attribute for the path.
Querying Specific Attributes
----------------------------
-* Prepare an array of `struct git_attr_check` to define the list of
- attributes you would want to check. To populate this array, you would
- need to define necessary attributes by calling `git_attr()` function.
+* Prepare `struct git_attr_check` using git_attr_check_initl()
+ function, enumerating the names of attributes whose values you are
+ interested in, terminated with a NULL pointer. Alternatively, an
+ empty `struct git_attr_check` can be prepared by calling
+ `git_attr_check_alloc()` function and then attributes you want to
+ ask about can be added to it with `git_attr_check_append()`
+ function.
* Call `git_check_attr()` to check the attributes for the path.
-* Inspect `git_attr_check` structure to see how each of the attribute in
- the array is defined for the path.
+* Inspect `git_attr_check` structure to see how each of the
+ attribute in the array is defined for the path.
Example
-------
-To see how attributes "crlf" and "indent" are set for different paths.
+To see how attributes "crlf" and "ident" are set for different paths.
-. Prepare an array of `struct git_attr_check` with two elements (because
- we are checking two attributes). Initialize their `attr` member with
- pointers to `struct git_attr` obtained by calling `git_attr()`:
+. Prepare a `struct git_attr_check` with two elements (because
+ we are checking two attributes):
------------
-static struct git_attr_check check[2];
+static struct git_attr_check *check;
static void setup_check(void)
{
- if (check[0].attr)
+ if (check)
return; /* already done */
- check[0].attr = git_attr("crlf");
- check[1].attr = git_attr("ident");
+ check = git_attr_check_initl("crlf", "ident", NULL);
}
------------
-. Call `git_check_attr()` with the prepared array of `struct git_attr_check`:
+. Call `git_check_attr()` with the prepared `struct git_attr_check`:
------------
const char *path;
setup_check();
- git_check_attr(path, ARRAY_SIZE(check), check);
+ git_check_attr(path, check);
------------
-. Act on `.value` member of the result, left in `check[]`:
+. Act on `.value` member of the result, left in `check->check[]`:
------------
- const char *value = check[0].value;
+ const char *value = check->check[0].value;
if (ATTR_TRUE(value)) {
The attribute is Set, by listing only the name of the
@@ -109,20 +116,39 @@ static void setup_check(void)
}
------------
+To see how attributes in argv[] are set for different paths, only
+the first step in the above would be different.
+
+------------
+static struct git_attr_check *check;
+static void setup_check(const char **argv)
+{
+ check = git_attr_check_alloc();
+ while (*argv) {
+ struct git_attr *attr = git_attr(*argv);
+ git_attr_check_append(check, attr);
+ argv++;
+ }
+}
+------------
+
Querying All Attributes
-----------------------
To get the values of all attributes associated with a file:
-* Call `git_all_attrs()`, which returns an array of `git_attr_check`
- structures.
+* Prepare an empty `git_attr_check` structure by calling
+ `git_attr_check_alloc()`.
+
+* Call `git_all_attrs()`, which populates the `git_attr_check`
+ with the attributes attached to the path.
-* Iterate over the `git_attr_check` array to examine the attribute
- names and values. The name of the attribute described by a
- `git_attr_check` object can be retrieved via
- `git_attr_name(check[i].attr)`. (Please note that no items will be
- returned for unset attributes, so `ATTR_UNSET()` will return false
- for all returned `git_array_check` objects.)
+* Iterate over the `git_attr_check.check[]` array to examine
+ the attribute names and values. The name of the attribute
+ described by a `git_attr_check.check[]` object can be retrieved via
+ `git_attr_name(check->check[i].attr)`. (Please note that no items
+ will be returned for unset attributes, so `ATTR_UNSET()` will return
+ false for all returned `git_array_check` objects.)
-* Free the `git_array_check` array.
+* Free the `git_array_check` by calling `git_attr_check_free()`.
diff --git a/attr.c b/attr.c
index 76f0d6b..d427798 100644
--- a/attr.c
+++ b/attr.c
@@ -778,7 +778,8 @@ static void collect_some_attrs(const char *path, int num,
rem = fill(path, pathlen, basename_offset, stk, rem);
}
-int git_check_attrs(const char *path, int num, struct git_attr_check_elem *check)
+static int git_check_attrs(const char *path, int num,
+ struct git_attr_check_elem *check)
{
int i;
diff --git a/attr.h b/attr.h
index 0d94077..506db0c 100644
--- a/attr.h
+++ b/attr.h
@@ -52,8 +52,6 @@ extern void git_attr_check_free(struct git_attr_check *);
*/
extern const char *git_attr_name(const struct git_attr *);
-int git_check_attrs(const char *path, int, struct git_attr_check_elem *);
-
/*
* Retrieve all attributes that apply to the specified path.
* check holds the attributes and their values.
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 12/36] attr: convert git_all_attrs() to use "struct git_attr_check"
From: Stefan Beller @ 2016-10-22 23:32 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
This updates the other two ways the attribute check is done via an
array of "struct git_attr_check_elem" elements. These two niches
appear only in "git check-attr".
* The caller does not know offhand what attributes it wants to ask
about and cannot use git_attr_check_initl() to prepare the
git_attr_check structure.
* The caller may not know what attributes it wants to ask at all,
and instead wants to learn everything that the given path has.
Such a caller can call git_attr_check_alloc() to allocate an empty
git_attr_check, and then call git_attr_check_append() to add
attribute names one by one. A new attribute can be appended until
git_attr_check structure is "finalized", which happens when it is
used to ask for attributes for any path by calling git_check_attr()
or git_all_attrs(). A git_attr_check structure that is initialized
by git_attr_check_initl() is already finalized when it is returned.
I am not at all happy with the way git_all_attrs() API turned out to
be, but it is only to support one niche caller ("check-attr --all"),
so I'll stop here for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 75 ++++++++++++++++++++++++++++++++++++++--------------
attr.h | 16 ++++++-----
builtin/check-attr.c | 51 ++++++++++++++++++-----------------
3 files changed, 90 insertions(+), 52 deletions(-)
diff --git a/attr.c b/attr.c
index 861e1a2..76f0d6b 100644
--- a/attr.c
+++ b/attr.c
@@ -724,6 +724,11 @@ static int macroexpand_one(int nr, int rem)
return rem;
}
+static int attr_check_is_dynamic(const struct git_attr_check *check)
+{
+ return (void *)(check->check) != (void *)(check + 1);
+}
+
/*
* Collect attributes for path into the array pointed to by
* check_all_attr. If num is non-zero, only attributes in check[] are
@@ -789,32 +794,21 @@ int git_check_attrs(const char *path, int num, struct git_attr_check_elem *check
return 0;
}
-int git_all_attrs(const char *path, int *num, struct git_attr_check_elem **check)
+void git_all_attrs(const char *path, struct git_attr_check *check)
{
- int i, count, j;
+ int i;
+ git_attr_check_clear(check);
collect_some_attrs(path, 0, NULL);
- /* Count the number of attributes that are set. */
- count = 0;
- for (i = 0; i < attr_nr; i++) {
- const char *value = check_all_attr[i].value;
- if (value != ATTR__UNSET && value != ATTR__UNKNOWN)
- ++count;
- }
- *num = count;
- ALLOC_ARRAY(*check, count);
- j = 0;
for (i = 0; i < attr_nr; i++) {
+ const char *name = check_all_attr[i].attr->name;
const char *value = check_all_attr[i].value;
- if (value != ATTR__UNSET && value != ATTR__UNKNOWN) {
- (*check)[j].attr = check_all_attr[i].attr;
- (*check)[j].value = value;
- ++j;
- }
+ if (value == ATTR__UNSET || value == ATTR__UNKNOWN)
+ continue;
+ git_attr_check_append(check, git_attr(name));
+ check->check[check->check_nr - 1].value = value;
}
-
- return 0;
}
void git_attr_set_direction(enum git_attr_direction new, struct index_state *istate)
@@ -832,6 +826,7 @@ void git_attr_set_direction(enum git_attr_direction new, struct index_state *ist
int git_check_attr(const char *path, struct git_attr_check *check)
{
+ check->finalized = 1;
return git_check_attrs(path, check->check_nr, check->check);
}
@@ -849,17 +844,57 @@ struct git_attr_check *git_attr_check_initl(const char *one, ...)
check = xcalloc(1,
sizeof(*check) + cnt * sizeof(*(check->check)));
check->check_nr = cnt;
+ check->finalized = 1;
check->check = (struct git_attr_check_elem *)(check + 1);
check->check[0].attr = git_attr(one);
va_start(params, one);
for (cnt = 1; cnt < check->check_nr; cnt++) {
+ struct git_attr *attr;
param = va_arg(params, const char *);
if (!param)
die("BUG: counted %d != ended at %d",
check->check_nr, cnt);
- check->check[cnt].attr = git_attr(param);
+ attr = git_attr(param);
+ if (!attr)
+ die("BUG: %s: not a valid attribute name", param);
+ check->check[cnt].attr = attr;
}
va_end(params);
return check;
}
+
+struct git_attr_check *git_attr_check_alloc(void)
+{
+ return xcalloc(1, sizeof(struct git_attr_check));
+}
+
+struct git_attr_check_elem *git_attr_check_append(struct git_attr_check *check,
+ const struct git_attr *attr)
+{
+ struct git_attr_check_elem *elem;
+ if (check->finalized)
+ die("BUG: append after git_attr_check structure is finalized");
+ if (!attr_check_is_dynamic(check))
+ die("BUG: appending to a statically initialized git_attr_check");
+ ALLOC_GROW(check->check, check->check_nr + 1, check->check_alloc);
+ elem = &check->check[check->check_nr++];
+ elem->attr = attr;
+ return elem;
+}
+
+void git_attr_check_clear(struct git_attr_check *check)
+{
+ if (!attr_check_is_dynamic(check))
+ die("BUG: clearing a statically initialized git_attr_check");
+ free(check->check);
+ check->check_nr = 0;
+ check->check_alloc = 0;
+ check->finalized = 0;
+}
+
+void git_attr_check_free(struct git_attr_check *check)
+{
+ git_attr_check_clear(check);
+ free(check);
+}
diff --git a/attr.h b/attr.h
index 3fd8690..0d94077 100644
--- a/attr.h
+++ b/attr.h
@@ -30,6 +30,7 @@ struct git_attr_check_elem {
};
struct git_attr_check {
+ int finalized;
int check_nr;
int check_alloc;
struct git_attr_check_elem *check;
@@ -38,6 +39,12 @@ struct git_attr_check {
extern struct git_attr_check *git_attr_check_initl(const char *, ...);
extern int git_check_attr(const char *path, struct git_attr_check *);
+extern struct git_attr_check *git_attr_check_alloc(void);
+extern struct git_attr_check_elem *git_attr_check_append(struct git_attr_check *, const struct git_attr *);
+
+extern void git_attr_check_clear(struct git_attr_check *);
+extern void git_attr_check_free(struct git_attr_check *);
+
/*
* Return the name of the attribute represented by the argument. The
* return value is a pointer to a null-delimited string that is part
@@ -48,13 +55,10 @@ extern const char *git_attr_name(const struct git_attr *);
int git_check_attrs(const char *path, int, struct git_attr_check_elem *);
/*
- * Retrieve all attributes that apply to the specified path. *num
- * will be set to the number of attributes on the path; **check will
- * be set to point at a newly-allocated array of git_attr_check
- * objects describing the attributes and their values. *check must be
- * free()ed by the caller.
+ * Retrieve all attributes that apply to the specified path.
+ * check holds the attributes and their values.
*/
-int git_all_attrs(const char *path, int *num, struct git_attr_check_elem **check);
+void git_all_attrs(const char *path, struct git_attr_check *check);
enum git_attr_direction {
GIT_ATTR_CHECKIN,
diff --git a/builtin/check-attr.c b/builtin/check-attr.c
index 97e3837..ec61476 100644
--- a/builtin/check-attr.c
+++ b/builtin/check-attr.c
@@ -24,12 +24,13 @@ static const struct option check_attr_options[] = {
OPT_END()
};
-static void output_attr(int cnt, struct git_attr_check_elem *check,
- const char *file)
+static void output_attr(struct git_attr_check *check, const char *file)
{
int j;
+ int cnt = check->check_nr;
+
for (j = 0; j < cnt; j++) {
- const char *value = check[j].value;
+ const char *value = check->check[j].value;
if (ATTR_TRUE(value))
value = "set";
@@ -42,36 +43,37 @@ static void output_attr(int cnt, struct git_attr_check_elem *check,
printf("%s%c" /* path */
"%s%c" /* attrname */
"%s%c" /* attrvalue */,
- file, 0, git_attr_name(check[j].attr), 0, value, 0);
+ file, 0,
+ git_attr_name(check->check[j].attr), 0, value, 0);
} else {
quote_c_style(file, NULL, stdout, 0);
- printf(": %s: %s\n", git_attr_name(check[j].attr), value);
+ printf(": %s: %s\n",
+ git_attr_name(check->check[j].attr), value);
}
-
}
}
static void check_attr(const char *prefix,
- int cnt, struct git_attr_check_elem *check,
+ struct git_attr_check *check,
const char *file)
{
char *full_path =
prefix_path(prefix, prefix ? strlen(prefix) : 0, file);
if (check != NULL) {
- if (git_check_attrs(full_path, cnt, check))
- die("git_check_attrs died");
- output_attr(cnt, check, file);
+ if (git_check_attr(full_path, check))
+ die("git_check_attr died");
+ output_attr(check, file);
} else {
- if (git_all_attrs(full_path, &cnt, &check))
- die("git_all_attrs died");
- output_attr(cnt, check, file);
- free(check);
+ check = git_attr_check_alloc();
+ git_all_attrs(full_path, check);
+ output_attr(check, file);
+ git_attr_check_free(check);
}
free(full_path);
}
static void check_attr_stdin_paths(const char *prefix,
- int cnt, struct git_attr_check_elem *check)
+ struct git_attr_check *check)
{
struct strbuf buf = STRBUF_INIT;
struct strbuf unquoted = STRBUF_INIT;
@@ -85,7 +87,7 @@ static void check_attr_stdin_paths(const char *prefix,
die("line is badly quoted");
strbuf_swap(&buf, &unquoted);
}
- check_attr(prefix, cnt, check, buf.buf);
+ check_attr(prefix, check, buf.buf);
maybe_flush_or_die(stdout, "attribute to stdout");
}
strbuf_release(&buf);
@@ -100,7 +102,7 @@ static NORETURN void error_with_usage(const char *msg)
int cmd_check_attr(int argc, const char **argv, const char *prefix)
{
- struct git_attr_check_elem *check;
+ struct git_attr_check *check;
int cnt, i, doubledash, filei;
if (!is_bare_repository())
@@ -163,24 +165,21 @@ int cmd_check_attr(int argc, const char **argv, const char *prefix)
if (all_attrs) {
check = NULL;
} else {
- check = xcalloc(cnt, sizeof(*check));
+ check = git_attr_check_alloc();
for (i = 0; i < cnt; i++) {
- const char *name;
- struct git_attr *a;
- name = argv[i];
- a = git_attr(name);
+ struct git_attr *a = git_attr(argv[i]);
if (!a)
return error("%s: not a valid attribute name",
- name);
- check[i].attr = a;
+ argv[i]);
+ git_attr_check_append(check, a);
}
}
if (stdin_paths)
- check_attr_stdin_paths(prefix, cnt, check);
+ check_attr_stdin_paths(prefix, check);
else {
for (i = filei; i < argc; i++)
- check_attr(prefix, cnt, check, argv[i]);
+ check_attr(prefix, check, argv[i]);
maybe_flush_or_die(stdout, "attribute to stdout");
}
return 0;
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 08/36] attr.c: tighten constness around "git_attr" structure
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
It holds an interned string, and git_attr_name() is a way to peek
into it. Make sure the involved pointer types are pointer-to-const.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 2 +-
attr.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/attr.c b/attr.c
index 7bfeef3..5c35d42 100644
--- a/attr.c
+++ b/attr.c
@@ -43,7 +43,7 @@ static int cannot_trust_maybe_real;
static struct git_attr_check *check_all_attr;
static struct git_attr *(git_attr_hash[HASHSIZE]);
-char *git_attr_name(struct git_attr *attr)
+const char *git_attr_name(const struct git_attr *attr)
{
return attr->name;
}
diff --git a/attr.h b/attr.h
index 8b08d33..00d7a66 100644
--- a/attr.h
+++ b/attr.h
@@ -25,7 +25,7 @@ extern const char git_attr__false[];
* Unset one is returned as NULL.
*/
struct git_attr_check {
- struct git_attr *attr;
+ const struct git_attr *attr;
const char *value;
};
@@ -34,7 +34,7 @@ struct git_attr_check {
* return value is a pointer to a null-delimited string that is part
* of the internal data structure; it should not be modified or freed.
*/
-char *git_attr_name(struct git_attr *);
+extern const char *git_attr_name(const struct git_attr *);
int git_check_attr(const char *path, int, struct git_attr_check *);
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 10/36] attr: rename function and struct related to checking attributes
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
The traditional API to check attributes is to prepare an N-element
array of "struct git_attr_check" and pass N and the array to the
function "git_check_attr()" as arguments.
In preparation to revamp the API to pass a single structure, in
which these N elements are held, rename the type used for these
individual array elements to "struct git_attr_check_elem" and rename
the function to "git_check_attrs()".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
archive.c | 6 +++---
attr.c | 12 ++++++------
attr.h | 8 ++++----
builtin/check-attr.c | 19 ++++++++++---------
builtin/pack-objects.c | 6 +++---
convert.c | 12 ++++++------
ll-merge.c | 10 +++++-----
userdiff.c | 4 ++--
ws.c | 6 +++---
9 files changed, 42 insertions(+), 41 deletions(-)
diff --git a/archive.c b/archive.c
index dde1ab4..2dc8d6c 100644
--- a/archive.c
+++ b/archive.c
@@ -87,7 +87,7 @@ void *sha1_file_to_archive(const struct archiver_args *args,
return buffer;
}
-static void setup_archive_check(struct git_attr_check *check)
+static void setup_archive_check(struct git_attr_check_elem *check)
{
static struct git_attr *attr_export_ignore;
static struct git_attr *attr_export_subst;
@@ -123,7 +123,7 @@ static int write_archive_entry(const unsigned char *sha1, const char *base,
struct archiver_context *c = context;
struct archiver_args *args = c->args;
write_archive_entry_fn_t write_entry = c->write_entry;
- struct git_attr_check check[2];
+ struct git_attr_check_elem check[2];
const char *path_without_prefix;
int err;
@@ -138,7 +138,7 @@ static int write_archive_entry(const unsigned char *sha1, const char *base,
path_without_prefix = path.buf + args->baselen;
setup_archive_check(check);
- if (!git_check_attr(path_without_prefix, ARRAY_SIZE(check), check)) {
+ if (!git_check_attrs(path_without_prefix, ARRAY_SIZE(check), check)) {
if (ATTR_TRUE(check[0].value))
return 0;
args->convert = ATTR_TRUE(check[1].value);
diff --git a/attr.c b/attr.c
index 1877f7a..c99e23a 100644
--- a/attr.c
+++ b/attr.c
@@ -40,7 +40,7 @@ struct git_attr {
static int attr_nr;
static int cannot_trust_maybe_real;
-static struct git_attr_check *check_all_attr;
+static struct git_attr_check_elem *check_all_attr;
static struct git_attr *(git_attr_hash[HASHSIZE]);
const char *git_attr_name(const struct git_attr *attr)
@@ -665,7 +665,7 @@ static int macroexpand_one(int attr_nr, int rem);
static int fill_one(const char *what, struct match_attr *a, int rem)
{
- struct git_attr_check *check = check_all_attr;
+ struct git_attr_check_elem *check = check_all_attr;
int i;
for (i = a->num_attr - 1; 0 < rem && 0 <= i; i--) {
@@ -730,7 +730,7 @@ static int macroexpand_one(int nr, int rem)
* collected. Otherwise all attributes are collected.
*/
static void collect_some_attrs(const char *path, int num,
- struct git_attr_check *check)
+ struct git_attr_check_elem *check)
{
struct attr_stack *stk;
@@ -758,7 +758,7 @@ static void collect_some_attrs(const char *path, int num,
rem = 0;
for (i = 0; i < num; i++) {
if (!check[i].attr->maybe_real) {
- struct git_attr_check *c;
+ struct git_attr_check_elem *c;
c = check_all_attr + check[i].attr->attr_nr;
c->value = ATTR__UNSET;
rem++;
@@ -773,7 +773,7 @@ static void collect_some_attrs(const char *path, int num,
rem = fill(path, pathlen, basename_offset, stk, rem);
}
-int git_check_attr(const char *path, int num, struct git_attr_check *check)
+int git_check_attrs(const char *path, int num, struct git_attr_check_elem *check)
{
int i;
@@ -789,7 +789,7 @@ int git_check_attr(const char *path, int num, struct git_attr_check *check)
return 0;
}
-int git_all_attrs(const char *path, int *num, struct git_attr_check **check)
+int git_all_attrs(const char *path, int *num, struct git_attr_check_elem **check)
{
int i, count, j;
diff --git a/attr.h b/attr.h
index 00d7a66..dd3c4a3 100644
--- a/attr.h
+++ b/attr.h
@@ -20,11 +20,11 @@ extern const char git_attr__false[];
#define ATTR_UNSET(v) ((v) == NULL)
/*
- * Send one or more git_attr_check to git_check_attr(), and
+ * Send one or more git_attr_check to git_check_attrs(), and
* each 'value' member tells what its value is.
* Unset one is returned as NULL.
*/
-struct git_attr_check {
+struct git_attr_check_elem {
const struct git_attr *attr;
const char *value;
};
@@ -36,7 +36,7 @@ struct git_attr_check {
*/
extern const char *git_attr_name(const struct git_attr *);
-int git_check_attr(const char *path, int, struct git_attr_check *);
+int git_check_attrs(const char *path, int, struct git_attr_check_elem *);
/*
* Retrieve all attributes that apply to the specified path. *num
@@ -45,7 +45,7 @@ int git_check_attr(const char *path, int, struct git_attr_check *);
* objects describing the attributes and their values. *check must be
* free()ed by the caller.
*/
-int git_all_attrs(const char *path, int *num, struct git_attr_check **check);
+int git_all_attrs(const char *path, int *num, struct git_attr_check_elem **check);
enum git_attr_direction {
GIT_ATTR_CHECKIN,
diff --git a/builtin/check-attr.c b/builtin/check-attr.c
index 53a5a18..97e3837 100644
--- a/builtin/check-attr.c
+++ b/builtin/check-attr.c
@@ -24,8 +24,8 @@ static const struct option check_attr_options[] = {
OPT_END()
};
-static void output_attr(int cnt, struct git_attr_check *check,
- const char *file)
+static void output_attr(int cnt, struct git_attr_check_elem *check,
+ const char *file)
{
int j;
for (j = 0; j < cnt; j++) {
@@ -51,14 +51,15 @@ static void output_attr(int cnt, struct git_attr_check *check,
}
}
-static void check_attr(const char *prefix, int cnt,
- struct git_attr_check *check, const char *file)
+static void check_attr(const char *prefix,
+ int cnt, struct git_attr_check_elem *check,
+ const char *file)
{
char *full_path =
prefix_path(prefix, prefix ? strlen(prefix) : 0, file);
if (check != NULL) {
- if (git_check_attr(full_path, cnt, check))
- die("git_check_attr died");
+ if (git_check_attrs(full_path, cnt, check))
+ die("git_check_attrs died");
output_attr(cnt, check, file);
} else {
if (git_all_attrs(full_path, &cnt, &check))
@@ -69,8 +70,8 @@ static void check_attr(const char *prefix, int cnt,
free(full_path);
}
-static void check_attr_stdin_paths(const char *prefix, int cnt,
- struct git_attr_check *check)
+static void check_attr_stdin_paths(const char *prefix,
+ int cnt, struct git_attr_check_elem *check)
{
struct strbuf buf = STRBUF_INIT;
struct strbuf unquoted = STRBUF_INIT;
@@ -99,7 +100,7 @@ static NORETURN void error_with_usage(const char *msg)
int cmd_check_attr(int argc, const char **argv, const char *prefix)
{
- struct git_attr_check *check;
+ struct git_attr_check_elem *check;
int cnt, i, doubledash, filei;
if (!is_bare_repository())
diff --git a/builtin/pack-objects.c b/builtin/pack-objects.c
index 1e7c2a9..3cb38ed 100644
--- a/builtin/pack-objects.c
+++ b/builtin/pack-objects.c
@@ -896,7 +896,7 @@ static void write_pack_file(void)
written, nr_result);
}
-static void setup_delta_attr_check(struct git_attr_check *check)
+static void setup_delta_attr_check(struct git_attr_check_elem *check)
{
static struct git_attr *attr_delta;
@@ -908,10 +908,10 @@ static void setup_delta_attr_check(struct git_attr_check *check)
static int no_try_delta(const char *path)
{
- struct git_attr_check check[1];
+ struct git_attr_check_elem check[1];
setup_delta_attr_check(check);
- if (git_check_attr(path, ARRAY_SIZE(check), check))
+ if (git_check_attrs(path, ARRAY_SIZE(check), check))
return 0;
if (ATTR_FALSE(check->value))
return 1;
diff --git a/convert.c b/convert.c
index 077f5e6..c95ae71 100644
--- a/convert.c
+++ b/convert.c
@@ -718,7 +718,7 @@ static int ident_to_worktree(const char *path, const char *src, size_t len,
return 1;
}
-static enum crlf_action git_path_check_crlf(struct git_attr_check *check)
+static enum crlf_action git_path_check_crlf(struct git_attr_check_elem *check)
{
const char *value = check->value;
@@ -735,7 +735,7 @@ static enum crlf_action git_path_check_crlf(struct git_attr_check *check)
return CRLF_UNDEFINED;
}
-static enum eol git_path_check_eol(struct git_attr_check *check)
+static enum eol git_path_check_eol(struct git_attr_check_elem *check)
{
const char *value = check->value;
@@ -748,7 +748,7 @@ static enum eol git_path_check_eol(struct git_attr_check *check)
return EOL_UNSET;
}
-static struct convert_driver *git_path_check_convert(struct git_attr_check *check)
+static struct convert_driver *git_path_check_convert(struct git_attr_check_elem *check)
{
const char *value = check->value;
struct convert_driver *drv;
@@ -761,7 +761,7 @@ static struct convert_driver *git_path_check_convert(struct git_attr_check *chec
return NULL;
}
-static int git_path_check_ident(struct git_attr_check *check)
+static int git_path_check_ident(struct git_attr_check_elem *check)
{
const char *value = check->value;
@@ -783,7 +783,7 @@ static const char *conv_attr_name[] = {
static void convert_attrs(struct conv_attrs *ca, const char *path)
{
int i;
- static struct git_attr_check ccheck[NUM_CONV_ATTRS];
+ static struct git_attr_check_elem ccheck[NUM_CONV_ATTRS];
if (!ccheck[0].attr) {
for (i = 0; i < NUM_CONV_ATTRS; i++)
@@ -792,7 +792,7 @@ static void convert_attrs(struct conv_attrs *ca, const char *path)
git_config(read_convert_config, NULL);
}
- if (!git_check_attr(path, NUM_CONV_ATTRS, ccheck)) {
+ if (!git_check_attrs(path, NUM_CONV_ATTRS, ccheck)) {
ca->crlf_action = git_path_check_crlf(ccheck + 4);
if (ca->crlf_action == CRLF_UNDEFINED)
ca->crlf_action = git_path_check_crlf(ccheck + 0);
diff --git a/ll-merge.c b/ll-merge.c
index ad8be42..eb2c37e 100644
--- a/ll-merge.c
+++ b/ll-merge.c
@@ -336,13 +336,13 @@ static const struct ll_merge_driver *find_ll_merge_driver(const char *merge_attr
return &ll_merge_drv[LL_TEXT_MERGE];
}
-static int git_path_check_merge(const char *path, struct git_attr_check check[2])
+static int git_path_check_merge(const char *path, struct git_attr_check_elem check[2])
{
if (!check[0].attr) {
check[0].attr = git_attr("merge");
check[1].attr = git_attr("conflict-marker-size");
}
- return git_check_attr(path, 2, check);
+ return git_check_attrs(path, 2, check);
}
static void normalize_file(mmfile_t *mm, const char *path)
@@ -362,7 +362,7 @@ int ll_merge(mmbuffer_t *result_buf,
mmfile_t *theirs, const char *their_label,
const struct ll_merge_options *opts)
{
- static struct git_attr_check check[2];
+ static struct git_attr_check_elem check[2];
static const struct ll_merge_options default_opts;
const char *ll_driver_name = NULL;
int marker_size = DEFAULT_CONFLICT_MARKER_SIZE;
@@ -398,12 +398,12 @@ int ll_merge(mmbuffer_t *result_buf,
int ll_merge_marker_size(const char *path)
{
- static struct git_attr_check check;
+ static struct git_attr_check_elem check;
int marker_size = DEFAULT_CONFLICT_MARKER_SIZE;
if (!check.attr)
check.attr = git_attr("conflict-marker-size");
- if (!git_check_attr(path, 1, &check) && check.value) {
+ if (!git_check_attrs(path, 1, &check) && check.value) {
marker_size = atoi(check.value);
if (marker_size <= 0)
marker_size = DEFAULT_CONFLICT_MARKER_SIZE;
diff --git a/userdiff.c b/userdiff.c
index 2125d6d..4de3289 100644
--- a/userdiff.c
+++ b/userdiff.c
@@ -263,7 +263,7 @@ struct userdiff_driver *userdiff_find_by_name(const char *name) {
struct userdiff_driver *userdiff_find_by_path(const char *path)
{
static struct git_attr *attr;
- struct git_attr_check check;
+ struct git_attr_check_elem check;
if (!attr)
attr = git_attr("diff");
@@ -271,7 +271,7 @@ struct userdiff_driver *userdiff_find_by_path(const char *path)
if (!path)
return NULL;
- if (git_check_attr(path, 1, &check))
+ if (git_check_attrs(path, 1, &check))
return NULL;
if (ATTR_TRUE(check.value))
diff --git a/ws.c b/ws.c
index ea4b2b1..7350905 100644
--- a/ws.c
+++ b/ws.c
@@ -71,7 +71,7 @@ unsigned parse_whitespace_rule(const char *string)
return rule;
}
-static void setup_whitespace_attr_check(struct git_attr_check *check)
+static void setup_whitespace_attr_check(struct git_attr_check_elem *check)
{
static struct git_attr *attr_whitespace;
@@ -82,10 +82,10 @@ static void setup_whitespace_attr_check(struct git_attr_check *check)
unsigned whitespace_rule(const char *pathname)
{
- struct git_attr_check attr_whitespace_rule;
+ struct git_attr_check_elem attr_whitespace_rule;
setup_whitespace_attr_check(&attr_whitespace_rule);
- if (!git_check_attr(pathname, 1, &attr_whitespace_rule)) {
+ if (!git_check_attrs(pathname, 1, &attr_whitespace_rule)) {
const char *value;
value = attr_whitespace_rule.value;
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 09/36] attr.c: plug small leak in parse_attr_line()
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
If any error is noticed after the match_attr structure is allocated,
we shouldn't just return NULL from this function.
Add a fail_return label that frees the allocated structure and
returns NULL, and consistently jump there when we want to return
NULL after cleaning up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/attr.c b/attr.c
index 5c35d42..1877f7a 100644
--- a/attr.c
+++ b/attr.c
@@ -223,7 +223,7 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
if (!macro_ok) {
fprintf(stderr, "%s not allowed: %s:%d\n",
name, src, lineno);
- return NULL;
+ goto fail_return;
}
is_macro = 1;
name += strlen(ATTRIBUTE_MACRO_PREFIX);
@@ -233,7 +233,7 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
fprintf(stderr,
"%.*s is not a valid attribute name: %s:%d\n",
namelen, name, src, lineno);
- return NULL;
+ goto fail_return;
}
}
else
@@ -246,7 +246,7 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
for (cp = states, num_attr = 0; *cp; num_attr++) {
cp = parse_attr(src, lineno, cp, NULL);
if (!cp)
- return NULL;
+ goto fail_return;
}
res = xcalloc(1,
@@ -267,7 +267,7 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
if (res->u.pat.flags & EXC_FLAG_NEGATIVE) {
warning(_("Negative patterns are ignored in git attributes\n"
"Use '\\!' for literal leading exclamation."));
- return NULL;
+ goto fail_return;
}
}
res->is_macro = is_macro;
@@ -283,6 +283,10 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
}
return res;
+
+fail_return:
+ free(res);
+ return NULL;
}
/*
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 07/36] attr.c: simplify macroexpand_one()
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
The double-loop wants to do an early return immediately when one
matching macro is found. Eliminate the extra variable 'a' used for
that purpose and rewrite the "assign the found item to 'a' to make
it non-NULL and force the loop(s) to terminate" with a direct return
from there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/attr.c b/attr.c
index 95416d3..7bfeef3 100644
--- a/attr.c
+++ b/attr.c
@@ -701,24 +701,21 @@ static int fill(const char *path, int pathlen, int basename_offset,
static int macroexpand_one(int nr, int rem)
{
struct attr_stack *stk;
- struct match_attr *a = NULL;
int i;
if (check_all_attr[nr].value != ATTR__TRUE ||
!check_all_attr[nr].attr->maybe_macro)
return rem;
- for (stk = attr_stack; !a && stk; stk = stk->prev)
- for (i = stk->num_matches - 1; !a && 0 <= i; i--) {
+ for (stk = attr_stack; stk; stk = stk->prev) {
+ for (i = stk->num_matches - 1; 0 <= i; i--) {
struct match_attr *ma = stk->attrs[i];
if (!ma->is_macro)
continue;
if (ma->u.attr->attr_nr == nr)
- a = ma;
+ return fill_one("expand", ma, rem);
}
-
- if (a)
- rem = fill_one("expand", a, rem);
+ }
return rem;
}
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 03/36] attr.c: update a stale comment on "struct match_attr"
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
When 82dce998 (attr: more matching optimizations from .gitignore,
2012-10-15) changed a pointer to a string "*pattern" into an
embedded "struct pattern" in struct match_attr, it forgot to update
the comment that describes the structure.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/attr.c b/attr.c
index 45aec1b..4ae7801 100644
--- a/attr.c
+++ b/attr.c
@@ -131,9 +131,8 @@ struct pattern {
* If is_macro is true, then u.attr is a pointer to the git_attr being
* defined.
*
- * If is_macro is false, then u.pattern points at the filename pattern
- * to which the rule applies. (The memory pointed to is part of the
- * memory block allocated for the match_attr instance.)
+ * If is_macro is false, then u.pat is the filename pattern to which the
+ * rule applies.
*
* In either case, num_attr is the number of attributes affected by
* this rule, and state is an array listing them. The attributes are
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 05/36] attr.c: complete a sentence in a comment
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/attr.c b/attr.c
index 05db667..a7f2c3f 100644
--- a/attr.c
+++ b/attr.c
@@ -300,7 +300,7 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
* directory (again, reading the file from top to bottom) down to the
* current directory, and then scan the list backwards to find the first match.
* This is exactly the same as what is_excluded() does in dir.c to deal with
- * .gitignore
+ * .gitignore file and info/excludes file as a fallback.
*/
static struct attr_stack {
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 06/36] attr.c: mark where #if DEBUG ends more clearly
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/attr.c b/attr.c
index a7f2c3f..95416d3 100644
--- a/attr.c
+++ b/attr.c
@@ -469,7 +469,7 @@ static void debug_set(const char *what, const char *match, struct git_attr *attr
#define debug_push(a) do { ; } while (0)
#define debug_pop(a) do { ; } while (0)
#define debug_set(a,b,c,d) do { ; } while (0)
-#endif
+#endif /* DEBUG_ATTR */
static void drop_attr_stack(void)
{
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 04/36] attr.c: explain the lack of attr-name syntax check in parse_attr()
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/attr.c b/attr.c
index 4ae7801..05db667 100644
--- a/attr.c
+++ b/attr.c
@@ -183,6 +183,12 @@ static const char *parse_attr(const char *src, int lineno, const char *cp,
return NULL;
}
} else {
+ /*
+ * As this function is always called twice, once with
+ * e == NULL in the first pass and then e != NULL in
+ * the second pass, no need for invalid_attr_name()
+ * check here.
+ */
if (*cp == '-' || *cp == '!') {
e->setto = (*cp == '-') ? ATTR__FALSE : ATTR__UNSET;
cp++;
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 02/36] attr.c: use strchrnul() to scan for one line
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
attr.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/attr.c b/attr.c
index eec5d7d..45aec1b 100644
--- a/attr.c
+++ b/attr.c
@@ -402,8 +402,8 @@ static struct attr_stack *read_attr_from_index(const char *path, int macro_ok)
for (sp = buf; *sp; ) {
char *ep;
int more;
- for (ep = sp; *ep && *ep != '\n'; ep++)
- ;
+
+ ep = strchrnul(sp, '\n');
more = (*ep == '\n');
*ep = '\0';
handle_attr_line(res, sp, path, ++lineno, macro_ok);
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCH 01/36] commit.c: use strchrnul() to scan for one line
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
In-Reply-To: <20161022233225.8883-1-sbeller@google.com>
From: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
---
commit.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/commit.c b/commit.c
index 856fd4a..41b2fdd 100644
--- a/commit.c
+++ b/commit.c
@@ -415,8 +415,7 @@ int find_commit_subject(const char *commit_buffer, const char **subject)
p++;
if (*p) {
p = skip_blank_lines(p + 2);
- for (eol = p; *eol && *eol != '\n'; eol++)
- ; /* do nothing */
+ eol = strchrnul(p, '\n');
} else
eol = p;
--
2.10.1.508.g6572022
^ permalink raw reply related
* [PATCHv2 00/36] Revamping the attr subsystem!
From: Stefan Beller @ 2016-10-22 23:31 UTC (permalink / raw)
To: gitster; +Cc: git, bmwill, pclouds, Stefan Beller
previous discussion:
http://public-inbox.org/git/20161012224109.23410-1-sbeller@google.com
http://public-inbox.org/git/20161011002115.23312-1-sbeller@google.com/
This implements the discarded series':
jc/attr
jc/attr-more
sb/pathspec-label
sb/submodule-default-paths
* I rebase to origin master (no merge conflicts)
* I implemented the thread safe attr API in patch 27 (attr: convert to new threadsafe API)
* patch 28 (attr: keep attr stack for each check) makes it actually possible
to run in a multithreaded environment.
* I added a test for the multithreaded when it is introduced in patch 32
(pathspec: allow querying for attributes)
Thanks,
Stefan
Junio C Hamano (24):
commit.c: use strchrnul() to scan for one line
attr.c: use strchrnul() to scan for one line
attr.c: update a stale comment on "struct match_attr"
attr.c: explain the lack of attr-name syntax check in parse_attr()
attr.c: complete a sentence in a comment
attr.c: mark where #if DEBUG ends more clearly
attr.c: simplify macroexpand_one()
attr.c: tighten constness around "git_attr" structure
attr.c: plug small leak in parse_attr_line()
attr: rename function and struct related to checking attributes
attr: (re)introduce git_check_attr() and struct git_attr_check
attr: convert git_all_attrs() to use "struct git_attr_check"
attr: convert git_check_attrs() callers to use the new API
attr: retire git_check_attrs() API
attr: add counted string version of git_check_attr()
attr: add counted string version of git_attr()
attr: expose validity check for attribute names
attr.c: add push_stack() helper
attr.c: pass struct git_attr_check down the callchain
attr.c: rename a local variable check
attr.c: correct ugly hack for git_all_attrs()
attr.c: introduce empty_attr_check_elems()
attr.c: always pass check[] to collect_some_attrs()
attr.c: outline the future plans by heavily commenting
Nguyễn Thái Ngọc Duy (1):
attr: support quoting pathname patterns in C style
Stefan Beller (11):
attr: make git_check_attr_counted static
attr: convert to new threadsafe API
attr: keep attr stack for each check
Documentation: fix a typo
pathspec: move long magic parsing out of prefix_pathspec
pathspec: move prefix check out of the inner loop
pathspec: allow querying for attributes
pathspec: allow escaped query values
submodule update: add `--init-default-path` switch
clone: add --init-submodule=<pathspec> switch
completion: clone can initialize specific submodules
Documentation/config.txt | 5 +
Documentation/git-clone.txt | 23 +-
Documentation/git-submodule.txt | 17 +-
Documentation/gitattributes.txt | 10 +-
Documentation/glossary-content.txt | 20 +
Documentation/technical/api-gitattributes.txt | 117 ++++--
archive.c | 26 +-
attr.c | 530 ++++++++++++++++++--------
attr.h | 74 +++-
builtin/check-attr.c | 65 ++--
builtin/clone.c | 36 +-
builtin/pack-objects.c | 27 +-
commit.c | 3 +-
contrib/completion/git-completion.bash | 1 +
convert.c | 45 +--
dir.c | 35 ++
git-submodule.sh | 21 +-
hashmap.h | 2 +
ll-merge.c | 36 +-
pathspec.c | 225 +++++++++--
pathspec.h | 16 +
t/t0003-attributes.sh | 26 ++
t/t6134-pathspec-with-labels.sh | 180 +++++++++
t/t7400-submodule-basic.sh | 134 +++++++
userdiff.c | 21 +-
ws.c | 26 +-
26 files changed, 1313 insertions(+), 408 deletions(-)
create mode 100755 t/t6134-pathspec-with-labels.sh
--
2.10.1.508.g6572022
^ permalink raw reply
* Stash pop/apply conflict and --theirs and --ours
From: Sven Strickroth @ 2016-10-22 22:58 UTC (permalink / raw)
To: Git List, Junio C Hamano, Jeff King
Hi,
I regularly experience that beginners have problems unterstanding that
--ours and --theirs are swapped when a conflict occurrs on git stash
apply or stash pop.
From the HCI perspective this is really counter intuitive.
So, I'd like to propose that on git shash pop/apply theirs and ours
should be swapped in git index, so that git checkout --theirs and --ours
work as expected.
PS: I'm sorry if this was already discussed, I haven't found any discussion.
--
Best regards,
Sven Strickroth
PGP key id F5A9D4C4 @ any key-server
^ permalink raw reply
* Re: [PATCH 2/3] submodule tests: replace cloning from . by "$(pwd)"
From: Stefan Beller @ 2016-10-22 20:46 UTC (permalink / raw)
To: Junio C Hamano
Cc: Johannes Sixt, Johannes Schindelin, git@vger.kernel.org, Karl A.,
Dennis Kaarsemaker, Jonathan Nieder
In-Reply-To: <xmqqh984aldl.fsf@gitster.mtv.corp.google.com>
On Sat, Oct 22, 2016 at 12:33 AM, Junio C Hamano <gitster@pobox.com> wrote:
> Johannes Sixt <j6t@kdbg.org> writes:
>
>>> The logic to construct the relative urls is not smart enough to
>>> detect that the ending /. is referring to the directory itself
>>> but rather treats it like any other relative path, i.e.
>>>
>>> path/to/dir/. + ../relative/path/to/submodule
>>>
>>> would result in
>>>
>>> path/to/dir/relative/path/to/submodule
>>>
>>> and not omit the "dir" as you may expect.
>>>
>>> As in a later patch we'll normalize the remote url before the
>>> computation of relative urls takes place, we need to first get our
>>> test suite in a shape with normalized urls only, which is why we should
>>> refrain from cloning from '.'
>>
>> But you are removing a valid use case from the tests. Aren't you
>> sweeping something under the rug with this patch?
>
> I share the same reaction.
Oh I see. I agree.
I reverted the lines that replace . by "$(pwd)" and it still works, but it
still works because the code path regarding local paths was not broken
(both . as well as "$(pwd)" are working without the fix)
>
> If the primary problem being solved is that the combination of a
> relative URL ../sub and the base URL for the superproject which is
> set to /path/to/dir/. (due to "clone .") were incorrectly resolved
> as /path/to/dir/sub (because the buggy relative path logic did not
> know that removing "/." at the end does not take you to one level
> up), and a topic that fixes the bug would make that relative URL
> ../sub to be resolved as /path/to/sub, of course. Otherwise, the
> topic did not fix the bug.
>
> Now if a test that wanted to have a clone of the superproject by
> "clone .", which results in the base URL of /path/to/dir/., actually
> wants to refer in its .gitmodules to /path/to/dir/sub (which after
> all was where the submodule the test created with or without the
> bugfix), I would think the right adjustment for the test that used
> to rely on the buggy behaviour would be to stop using ../sub and
> instead use ./sub as the relative URL, no? After all, the bug forced
> the original test writer to write ../sub but the submodule in this
> case actually is at ./sub relative to its superproject, and that is
> what the original test writer would have written if the bug weren't
> there in the first place, no?
True.
I have looked into it again, and by now I think the bug is a feature,
actually.
Consider this:
git clone . super
git -C super submodule add ../submodule
# we thought the previous line is buggy
git clone super super-clone
Now in the super-clone the ../submodule is the correct
relative url, because the url where we cloned from doesn't
end in /.
If we were to fix the bug with the /. ending, then we would need the
following:
git clone . super
git -C super submodule add ./submodule
# correct relative URL above!
git clone super super-clone
cd superclone && sed s|url =./|url = ../|
# make sure we fix the relative URLs to account for a different remote.
And this doesn't seem right to me as it burdens the user of the super-clone.
>
> Another thing I do not quite understand is why this step comes
> before the fix. If the "clone ." is adjusted to avoid triggering
> the buggy behaviour, i.e. making the base URL to /path/to/dir
> (instead of /path/to/dir/.), wouldn't the relative URL ../sub that
> was written to work around the bug that hasn't been fixed yet in
> this step need to be adjusted anyway? It would end up referring to
> /path/to/sub and not /path/to/dir/sub until the fix is put in place.
>
> Is the removal of remote.origin.url a wrong workaround for that
> breakage, I wonder... I do not understand that change at all, and I
> do not think it was explained in the log message.
I think it is wrong, because it is sidestepping the actual issue.
Continuing from above:
git clone super-clone super-clone2
# this works again, as the remote change doesn't matter.
mkdir test && git -C test clone ../ .
# submodule urls need to be "undone again to work:
cd test && sed s|url =../|url = ./|
So I think keeping the /. around as it currently is, is a pretty
useful bug.
>
> If we really wanted to update the test before fixing the bug, I
> would understand if this step changed ../sub (or whatever relative
> URL that has extra ../ only because the base URL has extra /. at the
> end to compensate for the buggy resolution) to ./sub in the tests
> and marked them to expect failure, and then a later step that fixes
> the bug turns them to expect success without make any other change.
I'll think about this further, but currently I am inclined to declare
it a nonbug
and as it eases testing a lot. Also if someone wants to clone a repository
with broken relative urls, they can work around that by e.g.
git clone <url>/.
to fix one level of indentation, though it is not documented and seems
to be brittle.
Thanks,
Stefan
^ permalink raw reply
* Re: [PATCH v5 00/27] Prepare the sequencer for the upcoming rebase -i patches
From: Junio C Hamano @ 2016-10-22 17:11 UTC (permalink / raw)
To: Johannes Schindelin
Cc: git, Stefan Beller, Jeff King, Jakub Narębski, Johannes Sixt,
Ramsay Jones
In-Reply-To: <cover.1477052405.git.johannes.schindelin@gmx.de>
Johannes Schindelin <johannes.schindelin@gmx.de> writes:
> This patch series marks the '4' in the countdown to speed up rebase -i
> by implementing large parts in C (read: there will be three more patch
> series after that before the full benefit hits git.git: sequencer-i,
> rebase--helper and rebase-i-extra).
> ...
> It would be *really* nice if we could get this patch series at least into
> `next` soon, as it gets late and later for the rest of the patches to make
> it into `master` in time for v2.11 (and it is not for lack of trying on my
> end...).
This "countdown 4" step can affect cherry-pick and revert, even
though we were careful to review changes to the sequencer.c code. I
prefer to cook it in 'next' sufficiently long to ensure that we hear
feedbacks from non-Windows users if there is any unexpected breakage.
There isn't enough time to include this topic in the upcoming
release within the current https://tinyurl.com/gitCal calendar,
however, which places the final on Nov 11th.
I am wondering if it makes sense to delay 2.11 by moving the final
by 4 weeks to Dec 9th.
Thoughts?
Speaking of what to and not to include in the upcoming release, we
do want to include Stefan's off-by-one fix to the submodule-helper,
but that is blocked on Windows end due to the test. I think
everybody agreed that a longer time "right thing to do" fix is to
address the "when base is /path/to/dir/., where is ../sub relative
to it?" issue, but if we are to do so, it would need a longer
gestation period once it hits 'next', as it can affect the current
users and we may even need B/C notes in the release notes for the
change. Giving ourselves a few more weeks of breathing room would
help us to make sure the fix to relative URL issue is sound, too.
As to "countdown 3" and below steps, I am guessing that some of them
can start cooking in 'next' before 2.11, but even with lengthened
schedule, it is likely that they need to cook there beyond the end
of this cycle, unless they are truly trivial changes that do not
even need any reviews.
Thanks.
^ permalink raw reply
* Re: [PATCH] daemon: detect and reject too-long paths
From: Junio C Hamano @ 2016-10-22 16:37 UTC (permalink / raw)
To: Jeff King; +Cc: git
In-Reply-To: <20161022045938.h3xa3yapzlg427vy@sigill.intra.peff.net>
Jeff King <peff@peff.net> writes:
> When we are checking the path via path_ok(), we use some
> fixed PATH_MAX buffers. We write into them via snprintf(),
> so there's no possibility of overflow, but it does mean we
> may silently truncate the path, leading to potentially
> confusing errors when the partial path does not exist.
>
> We're better off to reject the path explicitly.
>
> Signed-off-by: Jeff King <peff@peff.net>
> ---
Sounds sensible.
> Another option would be to switch to strbufs here. That potentially
> introduces cases where a client can convince us to just keep allocating
> memory, but I don't think so in practice; the paths and interpolated
> data items all have to come in 64K pkt-lines, which places a hard
> limit. This is a much more minimal change, though, and I don't hear
> anybody complaining about the inability to use large paths.
The alternative version did not look bad, either; in fact, the end
result may even be conceptually simpler.
But I agree that this one with the same hard-limit we always had is
a much more minimal change and is sufficient.
Thanks.
> daemon.c | 25 +++++++++++++++++++++----
> 1 file changed, 21 insertions(+), 4 deletions(-)
>
> diff --git a/daemon.c b/daemon.c
> index 425aad0507..ff0fa583b0 100644
> --- a/daemon.c
> +++ b/daemon.c
> @@ -160,6 +160,7 @@ static const char *path_ok(const char *directory, struct hostinfo *hi)
> {
> static char rpath[PATH_MAX];
> static char interp_path[PATH_MAX];
> + size_t rlen;
> const char *path;
> const char *dir;
>
> @@ -187,8 +188,12 @@ static const char *path_ok(const char *directory, struct hostinfo *hi)
> namlen = slash - dir;
> restlen -= namlen;
> loginfo("userpath <%s>, request <%s>, namlen %d, restlen %d, slash <%s>", user_path, dir, namlen, restlen, slash);
> - snprintf(rpath, PATH_MAX, "%.*s/%s%.*s",
> - namlen, dir, user_path, restlen, slash);
> + rlen = snprintf(rpath, sizeof(rpath), "%.*s/%s%.*s",
> + namlen, dir, user_path, restlen, slash);
> + if (rlen >= sizeof(rpath)) {
> + logerror("user-path too large: %s", rpath);
> + return NULL;
> + }
> dir = rpath;
> }
> }
> @@ -207,7 +212,15 @@ static const char *path_ok(const char *directory, struct hostinfo *hi)
>
> strbuf_expand(&expanded_path, interpolated_path,
> expand_path, &context);
> - strlcpy(interp_path, expanded_path.buf, PATH_MAX);
> +
> + rlen = strlcpy(interp_path, expanded_path.buf,
> + sizeof(interp_path));
> + if (rlen >= sizeof(interp_path)) {
> + logerror("interpolated path too large: %s",
> + interp_path);
> + return NULL;
> + }
> +
> strbuf_release(&expanded_path);
> loginfo("Interpolated dir '%s'", interp_path);
>
> @@ -219,7 +232,11 @@ static const char *path_ok(const char *directory, struct hostinfo *hi)
> logerror("'%s': Non-absolute path denied (base-path active)", dir);
> return NULL;
> }
> - snprintf(rpath, PATH_MAX, "%s%s", base_path, dir);
> + rlen = snprintf(rpath, sizeof(rpath), "%s%s", base_path, dir);
> + if (rlen >= sizeof(rpath)) {
> + logerror("base-path too large: %s", rpath);
> + return NULL;
> + }
> dir = rpath;
> }
^ permalink raw reply
* Re: [PATCH 3/3] transport: allow summary-width to be computed dynamically
From: Junio C Hamano @ 2016-10-22 16:25 UTC (permalink / raw)
To: Jeff King; +Cc: git
In-Reply-To: <20161022050426.t2fifjqrldc6mebc@sigill.intra.peff.net>
Jeff King <peff@peff.net> writes:
> On Fri, Oct 21, 2016 at 09:39:45PM -0700, Junio C Hamano wrote:
>
>> And this is the final one.
>>
>> -- >8 --
>> From: Junio C Hamano <gitster@pobox.com>
>> Date: Fri, 21 Oct 2016 21:33:06 -0700
>> Subject: [PATCH] transport: compute summary-width dynamically
>>
>> Now all that is left to do is to actually iterate over the refs
>> and measure the display width needed to show their abbreviation.
>
> I think we crossed emails. :) This is obviously correct, if we don't
> mind paying the find_unique_abbrev cost twice for each sha1.
Indeed we did. I do not think the cost matters that much in the
codepath to produce the final summary output.
> This is a minor style nit, but I think it's better to avoid mixing
> unrelated bits between the initialization, condition, and iteration bits
> of a for loop.
Yeah, you're right.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox