* Re: [PATCH] ls-remote: add "--diff" option to show only refs that differ
From: Linus Torvalds @ 2017-02-02 21:19 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Git Mailing List
In-Reply-To: <xmqqfujws3pl.fsf@gitster.mtv.corp.google.com>
On Thu, Feb 2, 2017 at 1:05 PM, Junio C Hamano <gitster@pobox.com> wrote:
>
> Another case I can think of that "--diff" would help is when you are
> inspecting your own mirror (but that can be seen as a special case
> of the "they have copies of yours plus their own", if you think of
> your mirror as "them" and the difference is "being stale").
Yeah, that's actually what I did for some testing (not having stale
branches, but just to check the expected differences for my upstream
kernel repo with my local pulls that I haven't pushed out yet).
The actual real use-case is something that only happens for me only
very occasionally. I end up sending out "did you forget to push"
emails perhaps a couple of times every release, but every time I do I
will have gone and done a ls-remote on their repo..
Linus
^ permalink raw reply
* [PATCH v2] git-prompt.sh: add submodule indicator
From: Benjamin Fuchs @ 2017-02-02 22:51 UTC (permalink / raw)
To: git; +Cc: szeder.dev, sbeller, gitster, Benjamin Fuchs
Hi everyone again,
I guess this time I'm rerolling my patch the right way.
Thanks again Gábor for your feedback.
And thanks to Junio for being patient and explaining the reroll workflow
Greeting,
Benjamin
Benjamin Fuchs (1):
git-prompt.sh: add submodule indicator
contrib/completion/git-prompt.sh | 40 ++++++++++++++++++++++++++-
t/t9903-bash-prompt.sh | 59 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 98 insertions(+), 1 deletion(-)
--
2.7.4
^ permalink raw reply
* [PATCH v2] git-prompt.sh: add submodule indicator
From: Benjamin Fuchs @ 2017-02-02 22:51 UTC (permalink / raw)
To: git; +Cc: szeder.dev, sbeller, gitster, Benjamin Fuchs
In-Reply-To: <1486075892-20676-1-git-send-email-email@benjaminfuchs.de>
I expirienced that working with submodules can be confusing. A submodule can be
anywhere in your parent git repository. While walking through the parent
repository it would be good to have a reminder to know when you entered a
submodule.
This new indicator will show if you are in a submodule. The new prompt will look
like this: (sub:master). If the currently checked out submodule commit does not
match the SHA-1 found in the index of the containing repository a "+" will be
prepended (+sub:master). Adding a new optional env variable for the new feature.
Signed-off-by: Benjamin Fuchs <email@benjaminfuchs.de>
---
contrib/completion/git-prompt.sh | 40 ++++++++++++++++++++++++++-
t/t9903-bash-prompt.sh | 59 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/contrib/completion/git-prompt.sh b/contrib/completion/git-prompt.sh
index 97eacd7..9a0c4af 100644
--- a/contrib/completion/git-prompt.sh
+++ b/contrib/completion/git-prompt.sh
@@ -93,6 +93,13 @@
# directory is set up to be ignored by git, then set
# GIT_PS1_HIDE_IF_PWD_IGNORED to a nonempty value. Override this on the
# repository level by setting bash.hideIfPwdIgnored to "false".
+#
+# If you would like __git_ps1 to indicate that you are in a submodule,
+# set GIT_PS1_SHOWSUBMODULE to a nonempty value. In this case the name
+# of the submodule will be prepended to the branch name (e.g. module:master).
+# If you set GIT_PS1_SHOWDIRTYSTATE to a nonempty value, the name will be
+# prepended by "+" if the currently checked out submodule commit does not
+# match the SHA-1 found in the index of the containing repository.
# check whether printf supports -v
__git_printf_supports_v=
@@ -284,6 +291,32 @@ __git_eread ()
test -r "$f" && read "$@" <"$f"
}
+# __git_ps1_submodule
+# Requires the git dir set in $g by the caller.
+# Returns the name of the submodule in $sub if we are currently inside one.
+# The name will be prepended by "+" if the currently checked out submodule commit
+# does not match the SHA-1 found in the index of the containing repository.
+# NOTE: git_dir looks like in a ...
+# - submodule: "GIT_PARENT/.git/modules/PATH_TO_SUBMODULE"
+# - parent: "GIT_PARENT/.git" (exception "." in .git)
+__git_ps1_submodule ()
+{
+ local git_dir="$g"
+ local submodule_name="$(basename "$git_dir")"
+ if [ "$submodule_name" != ".git" ] && [ "$submodule_name" != "." ]; then
+ local status=""
+ if [ -n "${GIT_PS1_SHOWDIRTYSTATE-}" ] &&
+ [ "$(git config --bool bash.showDirtyState)" != "false" ]
+ then
+ local parent_top="${git_dir%.git*}"
+ local submodule_top="${git_dir#*modules/}"
+ git -C "$parent_top" diff --no-ext-diff --ignore-submodules=dirty --quiet -- "$submodule_top" 2>/dev/null || status="+"
+ fi
+
+ sub="$status$submodule_name:"
+ fi
+}
+
# __git_ps1 accepts 0 or 1 arguments (i.e., format string)
# when called from PS1 using command substitution
# in this mode it prints text to add to bash PS1 prompt (includes branch name)
@@ -513,8 +546,13 @@ __git_ps1 ()
b="\${__git_ps1_branch_name}"
fi
+ local sub=""
+ if [ -n "${GIT_PS1_SHOWSUBMODULE-}" ]; then
+ __git_ps1_submodule
+ fi
+
local f="$w$i$s$u"
- local gitstring="$c$b${f:+$z$f}$r$p"
+ local gitstring="$c$sub$b${f:+$z$f}$r$p"
if [ $pcmode = yes ]; then
if [ "${__git_printf_supports_v-}" != yes ]; then
diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh
index 97c9b32..ac82c99 100755
--- a/t/t9903-bash-prompt.sh
+++ b/t/t9903-bash-prompt.sh
@@ -16,9 +16,22 @@ c_lblue='\\[\\e[1;34m\\]'
c_clear='\\[\\e[0m\\]'
test_expect_success 'setup for prompt tests' '
+ mkdir .subrepo &&
+ (cd .subrepo &&
+ git init &&
+ echo 1 >file &&
+ git add file &&
+ git commit -m initial &&
+ git checkout -b dirty &&
+ echo 2 >file &&
+ git commit -m "dirty branch" file
+ ) &&
git init otherrepo &&
echo 1 >file &&
git add file &&
+ git submodule add ./.subrepo sub &&
+ git -C sub checkout master &&
+ git add sub &&
test_tick &&
git commit -m initial &&
git tag -a -m msg1 t1 &&
@@ -755,4 +768,50 @@ test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stderr)' '
test_cmp expected "$actual"
'
+test_expect_success 'prompt - submodule indicator' '
+ printf " (sub:master)" >expected &&
+ (
+ cd sub &&
+ GIT_PS1_SHOWSUBMODULE=y &&
+ __git_ps1 >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success 'prompt - submodule indicator - disabled' '
+ printf " (master)" >expected &&
+ (
+ cd sub &&
+ GIT_PS1_SHOWSUBMODULE= &&
+ __git_ps1 >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success 'prompt - submodule indicator - dirty status indicator' '
+ printf " (+sub:dirty)" >expected &&
+ git -C sub checkout dirty &&
+ test_when_finished "git -C sub checkout master" &&
+ (
+ cd sub &&
+ GIT_PS1_SHOWSUBMODULE=y &&
+ GIT_PS1_SHOWDIRTYSTATE=y &&
+ __git_ps1 >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success 'prompt - submodule indicator - dirty status indicator disabled' '
+ printf " (sub:dirty)" >expected &&
+ git -C sub checkout dirty &&
+ test_when_finished "git -C sub checkout master" &&
+ (
+ cd sub &&
+ GIT_PS1_SHOWSUBMODULE=y &&
+ GIT_PS1_SHOWDIRTYSTATE= &&
+ __git_ps1 >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
test_done
--
2.7.4
^ permalink raw reply related
* Re: git-scm.com status report
From: Samuel Lijin @ 2017-02-02 22:51 UTC (permalink / raw)
To: pedro rijo, j; +Cc: Eric Wong, git@vger.kernel.org, Jeff King
In-Reply-To: <16F9F83D-5A7F-4059-9A27-DB25A8FB1E99@gmail.com>
For anyone interested, this thread is on the HN front page right now[0].
There's one suggestion in particular that stands out to me - shifting
to Digital Ocean[1], which for $240/mo offers wayyyy more than what it
sounds like the current Heroku costs are.
[0] https://news.ycombinator.com/item?id=13554065
[1] https://news.ycombinator.com/item?id=13554632
On Thu, Feb 2, 2017 at 4:01 PM, pedro rijo <pedrorijo91@gmail.com> wrote:
> Hey,
>
> While I’m not experienced with Rails apps, I would like to give my
> contribution to the Git project. I could help doing some kind of triage,
> removing abusing PRs/issues (like
> https://github.com/git/git-scm.com/pull/557), looking for typos and other
> tasks that wouldn’t require a lot of RoR knowledge to get start. Also,
> completely free and available to start digging into the RoR stuff of course!
>
> If you are interested, just let me know :)
>
> Thanks,
> Pedro Rijo
^ permalink raw reply
* [ANNOUNCE] Git v2.11.1
From: Junio C Hamano @ 2017-02-02 23:05 UTC (permalink / raw)
To: git; +Cc: Linux Kernel
The latest maintenance release Git v2.11.1 is now available at
the usual places.
The tarballs are found at:
https://www.kernel.org/pub/software/scm/git/
The following public repositories all have a copy of the 'v2.11.1'
tag and the 'maint' branch that the tag points at:
url = https://kernel.googlesource.com/pub/scm/git/git
url = git://repo.or.cz/alt-git.git
url = git://git.sourceforge.jp/gitroot/git-core/git.git
url = git://git-core.git.sourceforge.net/gitroot/git-core/git-core
url = https://github.com/gitster/git
----------------------------------------------------------------
Git v2.11.1 Release Notes
=========================
Fixes since v2.11
-----------------
* The default Travis-CI configuration specifies newer P4 and GitLFS.
* The character width table has been updated to match Unicode 9.0
* Update the isatty() emulation for Windows by updating the previous
hack that depended on internals of (older) MSVC runtime.
* "git rev-parse --symbolic" failed with a more recent notation like
"HEAD^-1" and "HEAD^!".
* An empty directory in a working tree that can simply be nuked used
to interfere while merging or cherry-picking a change to create a
submodule directory there, which has been fixed..
* The code in "git push" to compute if any commit being pushed in the
superproject binds a commit in a submodule that hasn't been pushed
out was overly inefficient, making it unusable even for a small
project that does not have any submodule but have a reasonable
number of refs.
* "git push --dry-run --recurse-submodule=on-demand" wasn't
"--dry-run" in the submodules.
* The output from "git worktree list" was made in readdir() order,
and was unstable.
* mergetool.<tool>.trustExitCode configuration variable did not apply
to built-in tools, but now it does.
* "git p4" LFS support was broken when LFS stores an empty blob.
* Fix a corner case in merge-recursive regression that crept in
during 2.10 development cycle.
* Update the error messages from the dumb-http client when it fails
to obtain loose objects; we used to give sensible error message
only upon 404 but we now forbid unexpected redirects that needs to
be reported with something sensible.
* When diff.renames configuration is on (and with Git 2.9 and later,
it is enabled by default, which made it worse), "git stash"
misbehaved if a file is removed and another file with a very
similar content is added.
* "git diff --no-index" did not take "--no-abbrev" option.
* "git difftool --dir-diff" had a minor regression when started from
a subdirectory, which has been fixed.
* "git commit --allow-empty --only" (no pathspec) with dirty index
ought to be an acceptable way to create a new commit that does not
change any paths, but it was forbidden, perhaps because nobody
needed it so far.
* A pathname that begins with "//" or "\\" on Windows is special but
path normalization logic was unaware of it.
* "git pull --rebase", when there is no new commits on our side since
we forked from the upstream, should be able to fast-forward without
invoking "git rebase", but it didn't.
* The way to specify hotkeys to "xxdiff" that is used by "git
mergetool" has been modernized to match recent versions of xxdiff.
* Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back
to where cherry-pick started while picking multiple changes, when
the cherry-pick stopped to ask for help from the user, and the user
did "git reset --hard" to a different commit in order to re-attempt
the operation.
* Code cleanup in shallow boundary computation.
* A recent update to receive-pack to make it easier to drop garbage
objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot
have a pathname with a colon in it (no surprise!), and this in turn
made it impossible to push into a repository at such a path. This
has been fixed by introducing a quoting mechanism used when
appending such a path to the colon-separated list.
* The function usage_msg_opt() has been updated to say "fatal:"
before the custom message programs give, when they want to die
with a message about wrong command line options followed by the
standard usage string.
* "git index-pack --stdin" needs an access to an existing repository,
but "git index-pack file.pack" to generate an .idx file that
corresponds to a packfile does not.
* Fix for NDEBUG builds.
* A lazy "git push" without refspec did not internally use a fully
specified refspec to perform 'current', 'simple', or 'upstream'
push, causing unnecessary "ambiguous ref" errors.
* "git p4" misbehaved when swapping a directory and a symbolic link.
* Even though an fix was attempted in Git 2.9.3 days, but running
"git difftool --dir-diff" from a subdirectory never worked. This
has been fixed.
* "git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* A potential but unlikely buffer overflow in Windows port has been
fixed.
* When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
* Some platforms no longer understand "latin-1" that is still seen in
the wild in e-mail headers; replace them with "iso-8859-1" that is
more widely known when conversion fails from/to it.
* Update the procedure to generate "tags" for developer support.
* Update the definition of the MacOSX test environment used by
TravisCI.
* A few git-svn updates.
* Compression setting for producing packfiles were spread across
three codepaths, one of which did not honor any configuration.
Unify these so that all of them honor core.compression and
pack.compression variables the same way.
* "git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* Leakage of lockfiles in the config subsystem has been fixed.
* It is natural that "git gc --auto" may not attempt to pack
everything into a single pack, and there is no point in warning
when the user has configured the system to use the pack bitmap,
leading to disabling further "gc".
* "git archive" did not read the standard configuration files, and
failed to notice a file that is marked as binary via the userdiff
driver configuration.
* "git blame --porcelain" misidentified the "previous" <commit, path>
pair (aka "source") when contents came from two or more files.
* "git rebase -i" with a recent update started showing an incorrect
count when squashing more than 10 commits.
* "git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* Tighten a test to avoid mistaking an extended ERE regexp engine as
a PRE regexp engine.
* Typing ^C to pager, which usually does not kill it, killed Git and
took the pager down as a collateral damage in certain process-tree
structure. This has been fixed.
Also contains various documentation updates and code clean-ups.
----------------------------------------------------------------
Changes since v2.11.0 are as follows:
Alan Davies (1):
mingw: fix colourization on Cygwin pseudo terminals
Andreas Krey (2):
commit: make --only --allow-empty work without paths
commit: remove 'Clever' message for --only --amend
Beat Bolli (6):
update_unicode.sh: move it into contrib/update-unicode
update_unicode.sh: remove an unnecessary subshell level
update_unicode.sh: pin the uniset repo to a known good commit
update_unicode.sh: automatically download newer definition files
update_unicode.sh: remove the plane filter
unicode_width.h: update the width tables to Unicode 9.0
Brandon Williams (2):
push: --dry-run updates submodules when --recurse-submodules=on-demand
push: fix --dry-run to not push submodules
Christian Couder (1):
Documentation/bisect: improve on (bad|new) and (good|bad)
David Aguilar (8):
mergetool: honor mergetool.$tool.trustExitCode for built-in tools
mergetools/vimdiff: trust Vim's exit code
difftool: fix dir-diff index creation when in a subdirectory
difftool: fix dir-diff index creation when in a subdirectory
difftool: sanitize $workdir as early as possible
difftool: chdir as early as possible
difftool: rename variables for consistency
mergetools: fix xxdiff hotkeys
David Turner (5):
submodules: allow empty working-tree dirs in merge/cherry-pick
remote-curl: don't hang when a server dies before any output
upload-pack: optionally allow fetching any sha1
auto gc: don't write bitmaps for incremental repacks
repack: die on incremental + write-bitmap-index
Dennis Kaarsemaker (1):
push: test pushing ambiguously named branches
Eric Wong (2):
git-svn: allow "0" in SVN path components
git-svn: document useLogAuthor and addAuthorFrom config keys
George Vanburgh (1):
git-p4: fix multi-path changelist empty commits
Heiko Voigt (4):
serialize collection of changed submodules
serialize collection of refs that contain submodule changes
batch check whether submodule needs pushing into one call
submodule_needs_pushing(): explain the behaviour when we cannot answer
Jack Bates (1):
diff: handle --no-abbrev in no-index case
Jeff Hostetler (1):
mingw: replace isatty() hack
Jeff King (32):
rev-parse: fix parent shorthands with --symbolic
t7610: clean up foo.XXXXXX tmpdir
http: simplify update_url_from_redirect
http: always update the base URL for redirects
remote-curl: rename shadowed options variable
http: make redirects more obvious
http: treat http-alternates like redirects
http-walker: complain about non-404 loose object errors
stash: prefer plumbing over git-diff
alternates: accept double-quoted paths
tmp-objdir: quote paths we add to alternates
Makefile: reformat FIND_SOURCE_FILES
Makefile: exclude test cruft from FIND_SOURCE_FILES
Makefile: match shell scripts in FIND_SOURCE_FILES
Makefile: exclude contrib from FIND_SOURCE_FILES
parse-options: print "fatal:" before usage_msg_opt()
README: replace gmane link with public-inbox
t5000: extract nongit function to test-lib-functions.sh
index-pack: complain when --stdin is used outside of a repo
t: use nongit() function where applicable
index-pack: skip collision check when not in repository
archive-zip: load userdiff config
rebase--interactive: count squash commits above 10 correctly
blame: fix alignment with --abbrev=40
blame: handle --no-abbrev
blame: output porcelain "previous" header for each file
git_exec_path: do not return the result of getenv()
execv_dashed_external: use child_process struct
execv_dashed_external: stop exiting with negative code
execv_dashed_external: wait for child on signal death
t7810: avoid assumption about invalid regex syntax
CodingGuidelines: clarify multi-line brace style
Johannes Schindelin (6):
cherry-pick: demonstrate a segmentation fault
merge-recursive: handle NULL in add_cacheinfo() correctly
mingw: intercept isatty() to handle /dev/null as Git expects it
mingw: adjust is_console() to work with stdin
git_exec_path: avoid Coverity warning about unfree()d result
mingw: follow-up to "replace isatty() hack"
Johannes Sixt (3):
t5547-push-quarantine: run the path separator test on Windows, too
normalize_path_copy(): fix pushing to //server/share/dir on Windows
t5615-alternate-env: double-quotes in file names do not work on Windows
Jonathan Tan (1):
fetch: do not redundantly calculate tag refmap
Junio C Hamano (11):
utf8: refactor code to decide fallback encoding
utf8: accept "latin-1" as ISO-8859-1
push: do not use potentially ambiguous default refspec
compression: unify pack.compression configuration parsing
pull: fast-forward "pull --rebase=true"
preparing for 2.10.3
Revert "sequencer: remove useless get_dir() function"
config.abbrev: document the new default that auto-scales
Almost ready for 2.11.1
Ready for 2.11.1
Git 2.11.1
Kristoffer Haugsbakk (4):
doc: add articles (grammar)
doc: add verb in front of command to run
doc: make the intent of sentence clearer
doc: omit needless "for"
Kyle J. McKay (1):
mailinfo.c: move side-effects outside of assert
Kyle Meyer (1):
branch_get_push: do not segfault when HEAD is detached
Lars Schneider (6):
travis-ci: update P4 to 16.2 and GitLFS to 1.5.2 in Linux build
git-p4: fix empty file processing for large file system backend GitLFS
t0021: minor filter process test cleanup
docs: warn about possible '=' in clean/smudge filter process values
t0021: fix flaky test
travis-ci: fix Perforce install on macOS
Luis Ressel (1):
date-formats.txt: Typo fix
Luke Diamand (1):
git-p4: avoid crash adding symlinked directory
Matt McCutchen (2):
doc: mention transfer data leaks in more places
git-gc.txt: expand discussion of races with other processes
Max Kirillov (1):
mingw: consider that UNICODE_STRING::Length counts bytes
Mike Hommey (1):
fast-import: properly fanout notes when tree is imported
Nguyễn Thái Ngọc Duy (13):
worktree.c: zero new 'struct worktree' on allocation
worktree: reorder an if statement
get_worktrees() must return main worktree as first item even on error
worktree.c: get_worktrees() takes a new flag argument
worktree list: keep the list sorted
merge-recursive.c: use string_list_sort instead of qsort
shallow.c: rename fields in paint_info to better express their purposes
shallow.c: stop abusing COMMIT_SLAB_SIZE for paint_info's memory pools
shallow.c: make paint_alloc slightly more robust
shallow.c: remove useless code
config.c: handle error case for fstat() calls
config.c: rename label unlock_and_out
config.c: handle lock file in error case in git_config_rename_...
Rasmus Villemoes (2):
shallow.c: avoid theoretical pointer wrap-around
shallow.c: bit manipulation tweaks
Stefan Beller (7):
unpack-trees: fix grammar for untracked files in directories
t3600: remove useless redirect
t3600: slightly modernize style
cache.h: document index_name_pos
cache.h: document remove_index_entry_at
cache.h: document add_[file_]to_index
documentation: retire unfinished documentation
Stephan Beyer (5):
am: fix filename in safe_to_abort() error message
am: change safe_to_abort()'s not rewinding error into a warning
t3510: test that cherry-pick --abort does not unsafely change HEAD
sequencer: make sequencer abort safer
sequencer: remove useless get_dir() function
Torsten Bögershausen (1):
convert: git cherry-pick -Xrenormalize did not work
Wolfram Sang (1):
request-pull: drop old USAGE stuff
^ permalink raw reply
* What's cooking in git.git (Feb 2017, #01; Thu, 2)
From: Junio C Hamano @ 2017-02-02 23:05 UTC (permalink / raw)
To: git
Here are the topics that have been cooking. Commits prefixed with
'-' are only in 'pu' (proposed updates) while commits prefixed with
'+' are in 'next'. The ones marked with '.' do not appear in any of
the integration branches, but I am still holding onto them.
The tip of 'master' has most of the topics (and all the big ones)
that should be in the upcoming release. I'll tag 2.12-rc0 sometime
tomorrow. On the 'maint' front, Git 2.11.1 has been tagged with
bugfixes that are already in 'master'.
You can find the changes described here in the integration branches
of the repositories listed at
http://git-blame.blogspot.com/p/git-public-repositories.html
--------------------------------------------------
[Graduated to "master"]
* bc/use-asciidoctor-opt (2017-01-31) 8 commits
(merged to 'next' on 2017-01-31 at f2a641f6f3)
+ Documentation: implement linkgit macro for Asciidoctor
+ Makefile: add a knob to enable the use of Asciidoctor
+ Documentation: move dblatex arguments into variable
+ Documentation: add XSLT to fix DocBook for Texinfo
+ Documentation: sort sources for gitman.texi
+ Documentation: remove unneeded argument in cat-texi.perl
+ Documentation: modernize cat-texi.perl
+ Documentation: fix warning in cat-texi.perl
Asciidoctor, an alternative reimplementation of AsciiDoc, still
needs some changes to work with documents meant to be formatted
with AsciiDoc. "make USE_ASCIIDOCTOR=YesPlease" to use it out of
the box to document our pages is getting closer to reality.
* cw/doc-sign-off (2017-01-27) 1 commit
(merged to 'next' on 2017-01-31 at 133cc2886d)
+ doc: clarify distinction between sign-off and pgp-signing
Doc update.
* ep/commit-static-buf-cleanup (2017-01-31) 2 commits
(merged to 'next' on 2017-01-31 at 02d3c25219)
+ builtin/commit.c: switch to strbuf, instead of snprintf()
+ builtin/commit.c: remove the PATH_MAX limitation via dynamic allocation
Code clean-up.
* gv/mingw-p4-mapuser (2017-01-30) 1 commit
(merged to 'next' on 2017-01-31 at 5a9f2c96f6)
+ git-p4: fix git-p4.mapUser on Windows
"git p4" did not work well with multiple git-p4.mapUser entries on
Windows.
* hv/mingw-help-is-executable (2017-01-30) 1 commit
(merged to 'next' on 2017-01-31 at 89aae8d018)
+ help: improve is_executable() on Windows
"git help" enumerates executable files in $PATH; the implementation
of "is this file executable?" on Windows has been optimized.
* js/mingw-hooks-with-exe-suffix (2017-01-30) 1 commit
(merged to 'next' on 2017-01-31 at 3b7863c578)
+ mingw: allow hooks to be .exe files
Names of the various hook scripts must be spelled exactly, but on
Windows, an .exe binary must be named with .exe suffix; notice
$GIT_DIR/hooks/<hookname>.exe as a valid <hookname> hook.
* js/retire-relink (2017-01-25) 2 commits
(merged to 'next' on 2017-01-31 at c6c6f9b902)
+ relink: really remove the command
+ relink: retire the command
Cruft removal.
* js/status-pre-rebase-i (2017-01-26) 1 commit
(merged to 'next' on 2017-01-31 at 09e51b2e39)
+ status: be prepared for not-yet-started interactive rebase
After starting "git rebase -i", which first opens the user's editor
to edit the series of patches to apply, but before saving the
contents of that file, "git status" failed to show the current
state (i.e. you are in an interactive rebase session, but you have
applied no steps yet) correctly.
* js/unzip-in-usr-bin-workaround (2017-01-27) 1 commit
(merged to 'next' on 2017-01-31 at 515d1d1f90)
+ test-lib: on FreeBSD, look for unzip(1) in /usr/local/bin/
Test tweak for FreeBSD where /usr/bin/unzip is unsuitable to run
our tests but /usr/local/bin/unzip is usable.
* mm/reset-facl-before-umask-test (2017-01-30) 1 commit
(merged to 'next' on 2017-01-31 at 4a2031e49c)
+ t0001: don't let a default ACL interfere with the umask test
Test tweaks for those who have default ACL in their git source tree
that interfere with the umask test.
* nd/log-graph-configurable-colors (2017-01-31) 4 commits
(merged to 'next' on 2017-01-31 at 36df9e2376)
+ color_parse_mem: allow empty color spec
(merged to 'next' on 2017-01-23 at c369982ad8)
+ log --graph: customize the graph lines with config log.graphColors
+ color.c: trim leading spaces in color_parse_mem()
+ color.c: fix color_parse_mem() with value_len == 0
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* rs/absolute-pathdup (2017-01-27) 2 commits
(merged to 'next' on 2017-01-31 at f751f64876)
+ use absolute_pathdup()
+ abspath: add absolute_pathdup()
Code cleanup.
* rs/receive-pack-cleanup (2017-01-30) 1 commit
(merged to 'next' on 2017-01-31 at d660881f69)
+ receive-pack: call string_list_clear() unconditionally
Code clean-up.
* sb/submodule-add-force (2016-11-29) 1 commit
+ submodule add: extend force flag to add existing repos
(this branch is used by sb/push-make-submodule-check-the-default.)
Originally merged to 'next' on 2016-12-12
"git submodule add" used to be confused and refused to add a
locally created repository; users can now use "--force" option
to add them.
* sg/mailmap-self (2017-01-31) 1 commit
(merged to 'next' on 2017-01-31 at 2e7641759c)
+ .mailmap: update Gábor Szeder's email address
Will merge to 'master'.
--------------------------------------------------
[Stalled]
* ls/p4-path-encoding (2016-12-18) 1 commit
- git-p4: fix git-p4.pathEncoding for removed files
When "git p4" imports changelist that removes paths, it failed to
convert pathnames when the p4 used encoding different from the one
used on the Git side. This has been corrected.
Will be rerolled.
cf. <7E1C7387-4F37-423F-803D-3B5690B49D40@gmail.com>
* sh/grep-tree-obj-tweak-output (2017-01-20) 2 commits
- grep: use '/' delimiter for paths
- grep: only add delimiter if there isn't one already
"git grep", when fed a tree-ish as an input, shows each hit
prefixed with "<tree-ish>:<path>:<lineno>:". As <tree-ish> is
almost always either a commit or a tag that points at a commit, the
early part of the output "<tree-ish>:<path>" can be used as the
name of the blob and given to "git show". When <tree-ish> is a
tree given in the extended SHA-1 syntax (e.g. "<commit>:", or
"<commit>:<dir>"), however, this results in a string that does not
name a blob (e.g. "<commit>::<path>" or "<commit>:<dir>:<path>").
"git grep" has been taught to be a bit more intelligent about these
cases and omit a colon (in the former case) or use slash (in the
latter case) to produce "<commit>:<path>" and
"<commit>:<dir>/<path>" that can be used as the name of a blob.
Waiting for the review discussion to settle, followed by a reroll.
* mh/ref-remove-empty-directory (2017-01-07) 23 commits
- files_transaction_commit(): clean up empty directories
- try_remove_empty_parents(): teach to remove parents of reflogs, too
- try_remove_empty_parents(): don't trash argument contents
- try_remove_empty_parents(): rename parameter "name" -> "refname"
- delete_ref_loose(): inline function
- delete_ref_loose(): derive loose reference path from lock
- log_ref_write_1(): inline function
- log_ref_setup(): manage the name of the reflog file internally
- log_ref_write_1(): don't depend on logfile argument
- log_ref_setup(): pass the open file descriptor back to the caller
- log_ref_setup(): improve robustness against races
- log_ref_setup(): separate code for create vs non-create
- log_ref_write(): inline function
- rename_tmp_log(): improve error reporting
- rename_tmp_log(): use raceproof_create_file()
- lock_ref_sha1_basic(): use raceproof_create_file()
- lock_ref_sha1_basic(): inline constant
- raceproof_create_file(): new function
- safe_create_leading_directories(): set errno on SCLD_EXISTS
- safe_create_leading_directories_const(): preserve errno
- t5505: use "for-each-ref" to test for the non-existence of references
- refname_is_safe(): correct docstring
- files_rename_ref(): tidy up whitespace
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
Expecting a reroll.
cf. <5051c78e-51f9-becd-e1a6-9c0b781d6912@alum.mit.edu>
* jc/diff-b-m (2015-02-23) 5 commits
. WIPWIP
. WIP: diff-b-m
- diffcore-rename: allow easier debugging
- diffcore-rename.c: add locate_rename_src()
- diffcore-break: allow debugging
"git diff -B -M" produced incorrect patch when the postimage of a
completely rewritten file is similar to the preimage of a removed
file; such a resulting file must not be expressed as a rename from
other place.
The fix in this patch is broken, unfortunately.
Will discard.
--------------------------------------------------
[Cooking]
* jk/delta-chain-limit (2017-01-27) 2 commits
- pack-objects: convert recursion to iteration in break_delta_chain()
- pack-objects: enforce --depth limit in reused deltas
"git repack --depth=<n>" for a long time busted the specified depth
when reusing delta from existing packs. This has been corrected.
Will merge to 'next'.
* js/re-running-failed-tests (2017-01-27) 1 commit
(merged to 'next' on 2017-01-31 at 30c3a9e0cf)
+ t/Makefile: add a rule to re-run previously-failed tests
"make -C t failed" will now run only the tests that failed in the
previous run. This is usable only when prove is not use, and gives
a useless error message when run after "make clean", but otherwise
is serviceable.
Will merge to 'master'.
* cw/log-updates-for-all-refs-really (2017-02-01) 4 commits
(merged to 'next' on 2017-02-02 at 3e11673fcc)
+ doc: add note about ignoring '--no-create-reflog'
(merged to 'next' on 2017-01-31 at 53f71d2401)
+ update-ref: add test cases for bare repository
+ refs: add option core.logAllRefUpdates = always
+ config: add markup to core.logAllRefUpdates doc
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
Will merge to 'master'.
* mm/merge-rename-delete-message (2017-01-30) 1 commit
- merge-recursive: make "CONFLICT (rename/delete)" message show both paths
* rs/object-id (2017-01-30) 3 commits
(merged to 'next' on 2017-01-31 at c442e4780c)
+ checkout: convert post_checkout_hook() to struct object_id
+ use oidcpy() for copying hashes between instances of struct object_id
+ use oid_to_hex_r() for converting struct object_id hashes to hex strings
"uchar [40]" to "struct object_id" conversion continues.
Will merge to 'master'.
* rs/swap (2017-01-30) 5 commits
- graph: use SWAP macro
- diff: use SWAP macro
- use SWAP macro
- apply: use SWAP macro
- add SWAP macro
Code clean-up.
Will merge to 'next'.
* pl/complete-diff-submodule-diff (2017-01-30) 1 commit
(merged to 'next' on 2017-01-31 at 7e668d325c)
+ Completion: Add support for --submodule=diff
The command line completion (in contrib/) learned that
"git diff --submodule=" can take "diff" as a recently added option.
Will merge to 'master'.
* ps/urlmatch-wildcard (2017-02-01) 5 commits
- urlmatch: allow globbing for the URL host part
- urlmatch: include host in urlmatch ranking
- urlmatch: split host and port fields in `struct url_info`
- urlmatch: enable normalization of URLs with globs
- mailmap: add Patrick Steinhardt's work address
The <url> part in "http.<url>.<variable>" configuration variable
can now be spelled with '*' that serves as wildcard.
E.g. "http.https://*.example.com.proxy" can be used to specify the
proxy used for https://a.example.com, https://b.example.com, etc.,
i.e. any host in the example.com domain.
* sb/submodule-recursive-absorb (2017-01-26) 3 commits
(merged to 'next' on 2017-01-31 at 0a24cfd06b)
+ submodule absorbing: fix worktree/gitdir pointers recursively for non-moves
+ cache.h: expose the dying procedure for reading gitlinks
+ setup: add gentle version of resolve_git_dir
When a submodule "sub", which has another submodule "module" nested
within it, is "absorbed" into the top-level superproject, the inner
submodule "module" is left in a strange state.
Will merge to 'master'.
* sb/submodule-update-initial-runs-custom-script (2017-01-26) 1 commit
(merged to 'next' on 2017-01-31 at d794f894c6)
+ submodule update: run custom update script for initial populating as well
The user can specify a custom update method that is run when
"submodule update" updates an already checked out submodule. This
was ignored when checking the submodule out for the first time and
we instead always just checked out the commit that is bound to the
path in the superproject's index.
Will merge to 'master'.
* sf/putty-w-args (2017-02-01) 5 commits
- SQUASH???
- connect: Add the envvar GIT_SSH_VARIANT and ssh.variant config
- git_connect(): factor out SSH variant handling
- connect: rename tortoiseplink and putty variables
- connect: handle putty/plink also in GIT_SSH_COMMAND
The command line options for ssh invocation needs to be tweaked for
some implementations of SSH (e.g. PuTTY plink wants "-P <port>"
while OpenSSH wants "-p <port>" to specify port to connect to), and
the variant was guessed when GIT_SSH environment variable is used
to specify it. Extend the guess to the command specified by the
newer GIT_SSH_COMMAND and also core.sshcommand configuration
variable, and give an escape hatch for users to deal with
misdetected cases.
Expecting a reroll of the last step to plug new memory leak.
cf. <xmqqpoj8z7su.fsf@gitster.mtv.corp.google.com>
* jk/describe-omit-some-refs (2017-01-23) 5 commits
(merged to 'next' on 2017-01-23 at f8a14b4996)
+ describe: teach describe negative pattern matches
+ describe: teach --match to accept multiple patterns
+ name-rev: add support to exclude refs by pattern match
+ name-rev: extend --refs to accept multiple patterns
+ doc: add documentation for OPT_STRING_LIST
"git describe" and "git name-rev" have been taught to take more
than one refname patterns to restrict the set of refs to base their
naming output on, and also learned to take negative patterns to
name refs not to be used for naming via their "--exclude" option.
Will cook in 'next'.
* sb/unpack-trees-super-prefix (2017-01-25) 4 commits
(merged to 'next' on 2017-01-31 at dabe6ca2b1)
+ unpack-trees: support super-prefix option
+ t1001: modernize style
+ t1000: modernize style
+ read-tree: use OPT_BOOL instead of OPT_SET_INT
"git read-tree" and its underlying unpack_trees() machinery learned
to report problematic paths prefixed with the --super-prefix option.
Will merge to 'master'.
* sb/submodule-doc (2017-01-12) 3 commits
- submodules: add a background story
- submodule update documentation: don't repeat ourselves
- submodule documentation: add options to the subcommand
Needs review.
* bw/attr (2017-02-01) 27 commits
- attr: reformat git_attr_set_direction() function
- attr: push the bare repo check into read_attr()
- attr: store attribute stack in attr_check structure
- attr: tighten const correctness with git_attr and match_attr
- attr: remove maybe-real, maybe-macro from git_attr
- attr: eliminate global check_all_attr array
- attr: use hashmap for attribute dictionary
- attr: change validity check for attribute names to use positive logic
- attr: pass struct attr_check to collect_some_attrs
- attr: retire git_check_attrs() API
- attr: convert git_check_attrs() callers to use the new API
- attr: convert git_all_attrs() to use "struct attr_check"
- attr: (re)introduce git_check_attr() and struct attr_check
- attr: rename function and struct related to checking attributes
- attr.c: outline the future plans by heavily commenting
- Documentation: fix a typo
- attr.c: add push_stack() helper
- attr: support quoting pathname patterns in C style
- attr.c: plug small leak in parse_attr_line()
- attr.c: tighten constness around "git_attr" structure
- attr.c: simplify macroexpand_one()
- attr.c: mark where #if DEBUG ends more clearly
- attr.c: complete a sentence in a comment
- attr.c: explain the lack of attr-name syntax check in parse_attr()
- attr.c: update a stale comment on "struct match_attr"
- attr.c: use strchrnul() to scan for one line
- commit.c: use strchrnul() to scan for one line
The gitattributes machinery is being taught to work better in a
multi-threaded environment.
Expecting a reroll.
* vn/xdiff-func-context (2017-01-15) 1 commit
- xdiff -W: relax end-of-file function detection
"git diff -W" has been taught to handle the case where a new
function is added at the end of the file better.
Will hold.
An follow-up change to go back from the line that matches the
funcline to show comments before the function definition is still
being discussed.
* ls/filter-process-delayed (2017-01-08) 1 commit
. convert: add "status=delayed" to filter process protocol
Ejected, as does not build when merged to 'pu'.
* nd/worktree-move (2017-01-27) 7 commits
- fixup! worktree move: new command
- worktree remove: new command
- worktree move: refuse to move worktrees with submodules
- worktree move: accept destination as directory
- worktree move: new command
- worktree.c: add update_worktree_location()
- worktree.c: add validate_worktree()
"git worktree" learned move and remove subcommands.
Needs review.
* cc/split-index-config (2016-12-26) 21 commits
- Documentation/git-update-index: explain splitIndex.*
- Documentation/config: add splitIndex.sharedIndexExpire
- read-cache: use freshen_shared_index() in read_index_from()
- read-cache: refactor read_index_from()
- t1700: test shared index file expiration
- read-cache: unlink old sharedindex files
- config: add git_config_get_expiry() from gc.c
- read-cache: touch shared index files when used
- sha1_file: make check_and_freshen_file() non static
- Documentation/config: add splitIndex.maxPercentChange
- t1700: add tests for splitIndex.maxPercentChange
- read-cache: regenerate shared index if necessary
- config: add git_config_get_max_percent_split_change()
- Documentation/git-update-index: talk about core.splitIndex config var
- Documentation/config: add information for core.splitIndex
- t1700: add tests for core.splitIndex
- update-index: warn in case of split-index incoherency
- read-cache: add and then use tweak_split_index()
- split-index: add {add,remove}_split_index() functions
- config: add git_config_get_split_index()
- config: mark an error message up for translation
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
Waiting for review comments to be addressed.
cf. <20161226102222.17150-1-chriscool@tuxfamily.org>
cf. <a1a44640-ff6c-2294-72ac-46322eff8505@ramsayjones.plus.com>
* sb/push-make-submodule-check-the-default (2017-01-26) 2 commits
(merged to 'next' on 2017-01-26 at 5f4715cea6)
+ Revert "push: change submodule default to check when submodules exist"
(merged to 'next' on 2016-12-12 at 1863e05af5)
+ push: change submodule default to check when submodules exist
Turn the default of "push.recurseSubmodules" to "check" when
submodules seem to be in use.
Retracted.
* kn/ref-filter-branch-list (2017-01-31) 20 commits
(merged to 'next' on 2017-01-31 at e7592a5461)
+ branch: implement '--format' option
+ branch: use ref-filter printing APIs
+ branch, tag: use porcelain output
+ ref-filter: allow porcelain to translate messages in the output
+ ref-filter: add an 'rstrip=<N>' option to atoms which deal with refnames
+ ref-filter: modify the 'lstrip=<N>' option to work with negative '<N>'
+ ref-filter: Do not abruptly die when using the 'lstrip=<N>' option
+ ref-filter: rename the 'strip' option to 'lstrip'
+ ref-filter: make remote_ref_atom_parser() use refname_atom_parser_internal()
+ ref-filter: introduce refname_atom_parser()
+ ref-filter: introduce refname_atom_parser_internal()
+ ref-filter: make "%(symref)" atom work with the ':short' modifier
+ ref-filter: add support for %(upstream:track,nobracket)
+ ref-filter: make %(upstream:track) prints "[gone]" for invalid upstreams
+ ref-filter: introduce format_ref_array_item()
+ ref-filter: move get_head_description() from branch.c
+ ref-filter: modify "%(objectname:short)" to take length
+ ref-filter: implement %(if:equals=<string>) and %(if:notequals=<string>)
+ ref-filter: include reference to 'used_atom' within 'atom_value'
+ ref-filter: implement %(if), %(then), and %(else) atoms
The code to list branches in "git branch" has been consolidated
with the more generic ref-filter API.
Will cook in 'next'.
* jk/no-looking-at-dotgit-outside-repo-final (2016-10-26) 1 commit
(merged to 'next' on 2016-12-05 at 0c77e39cd5)
+ setup_git_env: avoid blind fall-back to ".git"
Originally merged to 'next' on 2016-10-26
This is the endgame of the topic to avoid blindly falling back to
".git" when the setup sequence said we are _not_ in Git repository.
A corner case that happens to work right now may be broken by a
call to die("BUG").
Will cook in 'next'.
* pb/bisect (2016-10-18) 27 commits
- bisect--helper: remove the dequote in bisect_start()
- bisect--helper: retire `--bisect-auto-next` subcommand
- bisect--helper: retire `--bisect-autostart` subcommand
- bisect--helper: retire `--bisect-write` subcommand
- bisect--helper: `bisect_replay` shell function in C
- bisect--helper: `bisect_log` shell function in C
- bisect--helper: retire `--write-terms` subcommand
- bisect--helper: retire `--check-expected-revs` subcommand
- bisect--helper: `bisect_state` & `bisect_head` shell function in C
- bisect--helper: `bisect_autostart` shell function in C
- bisect--helper: retire `--next-all` subcommand
- bisect--helper: retire `--bisect-clean-state` subcommand
- bisect--helper: `bisect_next` and `bisect_auto_next` shell function in C
- t6030: no cleanup with bad merge base
- bisect--helper: `bisect_start` shell function partially in C
- bisect--helper: `get_terms` & `bisect_terms` shell function in C
- bisect--helper: `bisect_next_check` & bisect_voc shell function in C
- bisect--helper: `check_and_set_terms` shell function in C
- bisect--helper: `bisect_write` shell function in C
- bisect--helper: `is_expected_rev` & `check_expected_revs` shell function in C
- bisect--helper: `bisect_reset` shell function in C
- wrapper: move is_empty_file() and rename it as is_empty_or_missing_file()
- t6030: explicitly test for bisection cleanup
- bisect--helper: `bisect_clean_state` shell function in C
- bisect--helper: `write_terms` shell function in C
- bisect: rewrite `check_term_format` shell function in C
- bisect--helper: use OPT_CMDMODE instead of OPT_BOOL
Move more parts of "git bisect" to C.
Expecting a reroll.
cf. <CAFZEwPPXPPHi8KiEGS9ggzNHDCGhuqMgH9Z8-Pf9GLshg8+LPA@mail.gmail.com>
cf. <CAFZEwPM9RSTGN54dzaw9gO9iZmsYjJ_d1SjUD4EzSDDbmh-XuA@mail.gmail.com>
* jc/merge-drop-old-syntax (2015-04-29) 1 commit
(merged to 'next' on 2016-12-05 at 041946dae0)
+ merge: drop 'git merge <message> HEAD <commit>' syntax
Originally merged to 'next' on 2016-10-11
Stop supporting "git merge <message> HEAD <commit>" syntax that has
been deprecated since October 2007, and issues a deprecation
warning message since v2.5.0.
Will cook in 'next'.
--------------------------------------------------
[Discarded]
* jc/bundle (2016-03-03) 6 commits
. index-pack: --clone-bundle option
. Merge branch 'jc/index-pack' into jc/bundle
. bundle v3: the beginning
. bundle: keep a copy of bundle file name in the in-core bundle header
. bundle: plug resource leak
. bundle doc: 'verify' is not about verifying the bundle
The beginning of "split bundle", which could be one of the
ingredients to allow "git clone" traffic off of the core server
network to CDN.
While I think it would make it easier for people to experiment and
build on if the topic is merged to 'next', I am at the same time a
bit reluctant to merge an unproven new topic that introduces a new
file format, which we may end up having to support til the end of
time. It is likely that to support a "prime clone from CDN", it
would need a lot more than just "these are the heads and the pack
data is over there", so this may not be sufficient.
* jk/nofollow-attr-ignore (2016-11-02) 5 commits
. exclude: do not respect symlinks for in-tree .gitignore
. attr: do not respect symlinks for in-tree .gitattributes
. exclude: convert "check_index" into a flags field
. attr: convert "macro_ok" into a flags field
. add open_nofollow() helper
As we do not follow symbolic links when reading control files like
.gitignore and .gitattributes from the index, match the behaviour
and not follow symbolic links when reading them from the working
tree. This also tightens security a bit by not leaking contents of
an unrelated file in the error messages when it is pointed at by
one of these files that is a symbolic link.
Perhaps we want to cover .gitmodules too with the same mechanism?
^ permalink raw reply
* [PATCH] reset: add an example of how to split a commit into two
From: Jacob Keller @ 2017-02-03 0:30 UTC (permalink / raw)
To: git; +Cc: Jacob Keller
From: Jacob Keller <jacob.keller@gmail.com>
It is sometimes useful to break a commit into parts to more logically
show how the code changes. There are many possible ways to achieve this
result, but one simple and powerful one is to use git reset -p.
Add an example to the documentation showing how this can be done so that
users are more likely to discover this, instead of inventing more
painful methods such as re-writing code from scratch, or duplicating git
add -p more times than necessary.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
---
Documentation/git-reset.txt | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt
index 25432d9257f9..4adac7a25bf9 100644
--- a/Documentation/git-reset.txt
+++ b/Documentation/git-reset.txt
@@ -292,6 +292,29 @@ $ git reset --keep start <3>
<3> But you can use "reset --keep" to remove the unwanted commit after
you switched to "branch2".
+Split a commit into two::
++
+Suppose that you have created a commit, but later decide that you want to split
+the changes into two separate commits, including only part of the old commit
+into the first commit, and including the rest as a separate commit on top. You
+can use git reset in patch mode to interactively select which hunks to split
+out into a separate commit.
++
+------------
+$ git reset -p HEAD^ <1>
+$ git commit --amend <2>
+$ git commit ... <3>
+------------
++
+<1> This lets you interactively undo changes between HEAD^ and HEAD, so you can
+ select which parts to remove from the initial commit. The changes are
+ placed into the index, leaving the working tree untouched.
+<2> Now, you ammend the initial commit with the modifications that you just
+ made in the index.
+<3> Finally, you can add and then commit the final original unmodified files
+ back as the second commit, enabling you to logically separate a commit
+ into a sequence of two commits instead.
+
DISCUSSION
----------
--
2.11.0.864.ge7592a54611d
^ permalink raw reply related
* [PATCHv2 00/21] completion: various __gitdir()-related improvements
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
This is a long overdue reroll of a bunch of bugfixes, cleanups and
optimizations related to how the completion script finds the path to
the repository and how it uses that path. Most importantly this
series adds support for completion following 'git -C path', and it
eliminates a few subshells and git processes, for the sake of
fork()+exec() challenged OSes.
The first round is at [1]. It made its way to pu back then, but since
the reroll didn't come it was eventually discarded.
What did NOT change since v1 is that the new option added to 'git
rev-parse' is still called '--absolute-git-dir'. There was a
suggestion [2] to turn it into an orthogonal '--absolute-dir' option
that works with other path-querying options, too, but I really doubt
it's worth it. In short, regular scripts don't care, because a
relative path doesn't make any difference for them, and before we do
this orthogonal thing we have to decide a bunch of questions first,
see [3].
Changes since v1:
- Use our real_path() instead of system realpath() to implement 'git
rev-parse --absolute-git-dir'.
- Refactored a bit how __git_refs() determines where it should list
refs from.
- Renamed a few refnames and remote in the tests (this accounts for
the bulk of the interdiff).
- Misc small adjustments: a few more comments, removed unnecessary
disambiguating '--', typofix and more consistent quoting.
- Improved commit messages.
- Rebased to current master.
The interdiff below is compared to v1 rebased on top of current master.
This series is also available at
https://github.com/szeder/git completion-gitdir-improvements
[1] - http://public-inbox.org/git/1456440650-32623-1-git-send-email-szeder@ira.uka.de/T/
[2] - http://public-inbox.org/git/CANoM8SXO_Rz_CVOz9ptsaVCzcQ2D1FQrSuFFW4vZ4SdRYMzD=w@mail.gmail.com/
[3] - http://public-inbox.org/git/20160518185825.Horde.EPd2nJNvqEW_VX4b01yWdIr@webmail.informatik.kit.edu/
SZEDER Gábor (21):
completion: improve __git_refs()'s in-code documentation
completion tests: don't add test cruft to the test repository
completion tests: make the $cur variable local to the test helper
functions
completion tests: consolidate getting path of current working
directory
completion tests: check __gitdir()'s output in the error cases
completion tests: add tests for the __git_refs() helper function
completion: ensure that the repository path given on the command line
exists
completion: fix most spots not respecting 'git --git-dir=<path>'
completion: respect 'git --git-dir=<path>' when listing remote refs
completion: list refs from remote when remote's name matches a
directory
completion: don't list 'HEAD' when trying refs completion outside of a
repo
completion: list short refs from a remote given as a URL
completion: don't offer commands when 'git --opt' needs an argument
completion: fix completion after 'git -C <path>'
rev-parse: add '--absolute-git-dir' option
completion: respect 'git -C <path>'
completion: don't use __gitdir() for git commands
completion: consolidate silencing errors from git commands
completion: don't guard git executions with __gitdir()
completion: extract repository discovery from __gitdir()
completion: cache the path to the repository
Documentation/git-rev-parse.txt | 4 +
builtin/rev-parse.c | 26 +-
contrib/completion/git-completion.bash | 250 ++++++++++-----
t/t1500-rev-parse.sh | 17 +-
t/t9902-completion.sh | 561 +++++++++++++++++++++++++++++----
5 files changed, 690 insertions(+), 168 deletions(-)
--
2.11.0.555.g967c1bcb3
diff --git a/builtin/rev-parse.c b/builtin/rev-parse.c
index 4040b3c86..1967bafba 100644
--- a/builtin/rev-parse.c
+++ b/builtin/rev-parse.c
@@ -820,10 +820,7 @@ int cmd_rev_parse(int argc, const char **argv, const char *prefix)
if (!gitdir && !prefix)
gitdir = ".git";
if (gitdir) {
- char absolute_path[PATH_MAX];
- if (!realpath(gitdir, absolute_path))
- die_errno(_("unable to get absolute path"));
- puts(absolute_path);
+ puts(real_path(gitdir));
continue;
}
}
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 0184d0ebc..ed06cb621 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -350,41 +350,38 @@ __git_tags ()
# Lists refs from the local (by default) or from a remote repository.
# It accepts 0, 1 or 2 arguments:
-# 1: The remote to lists refs from (optional; ignored, if set but empty).
+# 1: The remote to list refs from (optional; ignored, if set but empty).
# Can be the name of a configured remote, a path, or a URL.
# 2: In addition to local refs, list unique branches from refs/remotes/ for
# 'git checkout's tracking DWIMery (optional; ignored, if set but empty).
__git_refs ()
{
local i hash dir track="${2-}"
- local from_local=y remote="${1-}" named_remote=n
+ local list_refs_from=path remote="${1-}"
local format refs pfx
__git_find_repo_path
dir="$__git_repo_path"
- if [ -z "$dir" ] && [ -z "$remote" ]; then
- return
- fi
-
- if [ -n "$remote" ]; then
+ if [ -z "$remote" ]; then
+ if [ -z "$dir" ]; then
+ return
+ fi
+ else
if __git_is_configured_remote "$remote"; then
# configured remote takes precedence over a
# local directory with the same name
- from_local=n
- named_remote=y
+ list_refs_from=remote
+ elif [ -d "$remote/.git" ]; then
+ dir="$remote/.git"
+ elif [ -d "$remote" ]; then
+ dir="$remote"
else
- if [ -d "$remote/.git" ]; then
- dir="$remote/.git"
- elif [ -d "$remote" ]; then
- dir="$remote"
- else
- from_local=n
- fi
+ list_refs_from=url
fi
fi
- if [ "$from_local" = y ] && [ -d "$dir" ]; then
+ if [ "$list_refs_from" = path ]; then
case "$cur" in
refs|refs/*)
format="refname"
@@ -430,18 +427,18 @@ __git_refs ()
done
;;
*)
- if [ "$named_remote" = y ]; then
+ if [ "$list_refs_from" = remote ]; then
echo "HEAD"
- __git for-each-ref --format="%(refname:short)" -- \
+ __git for-each-ref --format="%(refname:short)" \
"refs/remotes/$remote/" | sed -e "s#^$remote/##"
else
__git ls-remote "$remote" HEAD \
- 'refs/tags/*' 'refs/heads/*' 'refs/remotes/*' |
+ "refs/tags/*" "refs/heads/*" "refs/remotes/*" |
while read -r hash i; do
case "$i" in
*^{}) ;;
refs/*) echo "${i#refs/*/}" ;;
- *) echo "$i" ;;
+ *) echo "$i" ;; # symbolic refs
esac
done
fi
@@ -910,7 +907,7 @@ __git_get_option_value ()
done
if [ -n "$config_key" ] && [ -z "$result" ]; then
- result="$(git --git-dir="$(__gitdir)" config "$config_key")"
+ result="$(__git config "$config_key")"
fi
echo "$result"
@@ -2830,9 +2827,12 @@ __git_main ()
if [ -z "$command" ]; then
case "$prev" in
--git-dir|-C|--work-tree)
+ # these need a path argument, let's fall back to
+ # Bash filename completion
return
;;
-c|--namespace)
+ # we don't support completing these options' arguments
return
;;
esac
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 1660759e3..d711bef24 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -519,22 +519,19 @@ test_expect_success '__git_is_configured_remote' '
'
test_expect_success 'setup for ref completion' '
- echo content >file1 &&
- echo more >file2 &&
- git add file1 file2 &&
- git commit -m one &&
- git branch mybranch &&
- git tag mytag &&
+ git commit --allow-empty -m initial &&
+ git branch matching-branch &&
+ git tag matching-tag &&
(
cd otherrepo &&
- >file &&
- git add file &&
- git commit -m initial &&
- git branch branch
+ git commit --allow-empty -m initial &&
+ git branch -m master master-in-other &&
+ git branch branch-in-other &&
+ git tag tag-in-other
) &&
- git remote add remote "$ROOT/otherrepo/.git" &&
- git update-ref refs/remotes/remote/branch master &&
- git update-ref refs/remotes/remote/master master &&
+ git remote add other "$ROOT/otherrepo/.git" &&
+ git fetch --no-tags other &&
+ rm -f .git/FETCH_HEAD &&
git init thirdrepo
'
@@ -542,10 +539,10 @@ test_expect_success '__git_refs - simple' '
cat >expected <<-EOF &&
HEAD
master
- mybranch
- remote/branch
- remote/master
- mytag
+ matching-branch
+ other/branch-in-other
+ other/master-in-other
+ matching-tag
EOF
(
cur= &&
@@ -557,7 +554,7 @@ test_expect_success '__git_refs - simple' '
test_expect_success '__git_refs - full refs' '
cat >expected <<-EOF &&
refs/heads/master
- refs/heads/mybranch
+ refs/heads/matching-branch
EOF
(
cur=refs/heads/ &&
@@ -569,8 +566,9 @@ test_expect_success '__git_refs - full refs' '
test_expect_success '__git_refs - repo given on the command line' '
cat >expected <<-EOF &&
HEAD
- branch
- master
+ branch-in-other
+ master-in-other
+ tag-in-other
EOF
(
__git_dir="$ROOT/otherrepo/.git" &&
@@ -583,8 +581,9 @@ test_expect_success '__git_refs - repo given on the command line' '
test_expect_success '__git_refs - remote on local file system' '
cat >expected <<-EOF &&
HEAD
- branch
- master
+ branch-in-other
+ master-in-other
+ tag-in-other
EOF
(
cur= &&
@@ -595,11 +594,12 @@ test_expect_success '__git_refs - remote on local file system' '
test_expect_success '__git_refs - remote on local file system - full refs' '
cat >expected <<-EOF &&
- refs/heads/branch
- refs/heads/master
+ refs/heads/branch-in-other
+ refs/heads/master-in-other
+ refs/tags/tag-in-other
EOF
(
- cur=refs/heads/ &&
+ cur=refs/ &&
__git_refs otherrepo >"$actual"
) &&
test_cmp expected "$actual"
@@ -608,24 +608,25 @@ test_expect_success '__git_refs - remote on local file system - full refs' '
test_expect_success '__git_refs - configured remote' '
cat >expected <<-EOF &&
HEAD
- branch
- master
+ branch-in-other
+ master-in-other
EOF
(
cur= &&
- __git_refs remote >"$actual"
+ __git_refs other >"$actual"
) &&
test_cmp expected "$actual"
'
test_expect_success '__git_refs - configured remote - full refs' '
cat >expected <<-EOF &&
- refs/heads/branch
- refs/heads/master
+ refs/heads/branch-in-other
+ refs/heads/master-in-other
+ refs/tags/tag-in-other
EOF
(
- cur=refs/heads/ &&
- __git_refs remote >"$actual"
+ cur=refs/ &&
+ __git_refs other >"$actual"
) &&
test_cmp expected "$actual"
'
@@ -633,28 +634,29 @@ test_expect_success '__git_refs - configured remote - full refs' '
test_expect_success '__git_refs - configured remote - repo given on the command line' '
cat >expected <<-EOF &&
HEAD
- branch
- master
+ branch-in-other
+ master-in-other
EOF
(
cd thirdrepo &&
__git_dir="$ROOT/.git" &&
cur= &&
- __git_refs remote >"$actual"
+ __git_refs other >"$actual"
) &&
test_cmp expected "$actual"
'
test_expect_success '__git_refs - configured remote - full refs - repo given on the command line' '
cat >expected <<-EOF &&
- refs/heads/branch
- refs/heads/master
+ refs/heads/branch-in-other
+ refs/heads/master-in-other
+ refs/tags/tag-in-other
EOF
(
cd thirdrepo &&
__git_dir="$ROOT/.git" &&
- cur=refs/heads/ &&
- __git_refs remote >"$actual"
+ cur=refs/ &&
+ __git_refs other >"$actual"
) &&
test_cmp expected "$actual"
'
@@ -662,14 +664,14 @@ test_expect_success '__git_refs - configured remote - full refs - repo given on
test_expect_success '__git_refs - configured remote - remote name matches a directory' '
cat >expected <<-EOF &&
HEAD
- branch
- master
+ branch-in-other
+ master-in-other
EOF
- mkdir remote &&
- test_when_finished "rm -rf remote" &&
+ mkdir other &&
+ test_when_finished "rm -rf other" &&
(
cur= &&
- __git_refs remote >"$actual"
+ __git_refs other >"$actual"
) &&
test_cmp expected "$actual"
'
@@ -677,8 +679,9 @@ test_expect_success '__git_refs - configured remote - remote name matches a dire
test_expect_success '__git_refs - URL remote' '
cat >expected <<-EOF &&
HEAD
- branch
- master
+ branch-in-other
+ master-in-other
+ tag-in-other
EOF
(
cur= &&
@@ -689,11 +692,12 @@ test_expect_success '__git_refs - URL remote' '
test_expect_success '__git_refs - URL remote - full refs' '
cat >expected <<-EOF &&
- refs/heads/branch
- refs/heads/master
+ refs/heads/branch-in-other
+ refs/heads/master-in-other
+ refs/tags/tag-in-other
EOF
(
- cur=refs/heads/ &&
+ cur=refs/ &&
__git_refs "file://$ROOT/otherrepo/.git" >"$actual"
) &&
test_cmp expected "$actual"
@@ -709,7 +713,7 @@ test_expect_success '__git_refs - non-existing remote' '
test_expect_success '__git_refs - non-existing remote - full refs' '
(
- cur=refs/heads/ &&
+ cur=refs/ &&
__git_refs non-existing >"$actual"
) &&
test_must_be_empty "$actual"
@@ -725,30 +729,41 @@ test_expect_success '__git_refs - non-existing URL remote' '
test_expect_success '__git_refs - non-existing URL remote - full refs' '
(
- cur=refs/heads/ &&
+ cur=refs/ &&
__git_refs "file://$ROOT/non-existing" >"$actual"
) &&
test_must_be_empty "$actual"
'
+test_expect_success '__git_refs - not in a git repository' '
+ (
+ GIT_CEILING_DIRECTORIES="$ROOT" &&
+ export GIT_CEILING_DIRECTORIES &&
+ cd subdir &&
+ cur= &&
+ __git_refs >"$actual"
+ ) &&
+ test_must_be_empty "$actual"
+'
+
test_expect_success '__git_refs - unique remote branches for git checkout DWIMery' '
cat >expected <<-EOF &&
HEAD
master
- mybranch
- otherremote/ambiguous
- otherremote/otherbranch
+ matching-branch
+ other/ambiguous
+ other/branch-in-other
+ other/master-in-other
remote/ambiguous
- remote/branch
- remote/master
- mytag
- branch
- master
- otherbranch
+ remote/branch-in-remote
+ matching-tag
+ branch-in-other
+ branch-in-remote
+ master-in-other
EOF
- for remote_ref in refs/remotes/remote/ambiguous \
- refs/remotes/otherremote/ambiguous \
- refs/remotes/otherremote/otherbranch
+ for remote_ref in refs/remotes/other/ambiguous \
+ refs/remotes/remote/ambiguous \
+ refs/remotes/remote/branch-in-remote
do
git update-ref $remote_ref master &&
test_when_finished "git update-ref -d $remote_ref"
@@ -760,19 +775,10 @@ test_expect_success '__git_refs - unique remote branches for git checkout DWIMer
test_cmp expected "$actual"
'
-test_expect_success '__git_refs - not in a git repository' '
- (
- GIT_CEILING_DIRECTORIES="$ROOT" &&
- export GIT_CEILING_DIRECTORIES &&
- cd subdir &&
- cur= &&
- __git_refs >"$actual"
- ) &&
- test_must_be_empty "$actual"
-'
-
-test_expect_success 'remove configured remote used for refs completion' '
- git remote remove remote
+test_expect_success 'teardown after ref completion' '
+ git branch -d matching-branch &&
+ git tag -d matching-tag &&
+ git remote remove other
'
test_expect_success '__git_get_config_variables' '
@@ -898,6 +904,15 @@ test_expect_success 'git --help completion' '
test_completion "git --help core" "core-tutorial "
'
+test_expect_success 'setup for integration tests' '
+ echo content >file1 &&
+ echo more >file2 &&
+ git add file1 file2 &&
+ git commit -m one &&
+ git branch mybranch &&
+ git tag mytag
+'
+
test_expect_success 'checkout completes ref names' '
test_completion "git checkout m" <<-\EOF
master Z
@@ -908,7 +923,7 @@ test_expect_success 'checkout completes ref names' '
test_expect_success 'git -C <path> checkout uses the right repo' '
test_completion "git -C subdir -C subsubdir -C .. -C ../otherrepo checkout b" <<-\EOF
- branch Z
+ branch-in-other Z
EOF
'
^ permalink raw reply related
* [PATCHv2 02/21] completion tests: don't add test cruft to the test repository
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
While preparing commits, three tests added newly created files to the
index using 'git add .', which added not only the files in question
but leftover test cruft from previous tests like the files 'expected'
and 'actual' as well. Luckily, this had no effect on the tests'
correctness.
Add only the files we are actually interested in.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
t/t9902-completion.sh | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index a34e55f87..f490c1d05 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -486,7 +486,7 @@ test_expect_success 'git --help completion' '
test_expect_success 'setup for ref completion' '
echo content >file1 &&
echo more >file2 &&
- git add . &&
+ git add file1 file2 &&
git commit -m one &&
git branch mybranch &&
git tag mytag
@@ -517,7 +517,7 @@ test_expect_success '<ref>: completes paths' '
test_expect_success 'complete tree filename with spaces' '
echo content >"name with spaces" &&
- git add . &&
+ git add "name with spaces" &&
git commit -m spaces &&
test_completion "git show HEAD:nam" <<-\EOF
name with spaces Z
@@ -526,7 +526,7 @@ test_expect_success 'complete tree filename with spaces' '
test_expect_success 'complete tree filename with metacharacters' '
echo content >"name with \${meta}" &&
- git add . &&
+ git add "name with \${meta}" &&
git commit -m meta &&
test_completion "git show HEAD:nam" <<-\EOF
name with ${meta} Z
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 04/21] completion tests: consolidate getting path of current working directory
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
Some tests of the __gitdir() helper function use the $TRASH_DIRECTORY
variable in direct path comparisons. In general this should be
avoided, because it might contain symbolic links. There happens to be
no issues with this here, however, because those tests use
$TRASH_DIRECTORY both for specifying the expected result and for
specifying input which in turn is just 'echo'ed verbatim.
Other __gitdir() tests ask for the path of the trash directory by
running $(pwd -P) in each test, sometimes even twice in a single test.
Run $(pwd) only once at the beginning of the test script to store the
path of the trash directory in a variable, and use that variable in
all __gitdir() tests.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
t/t9902-completion.sh | 44 +++++++++++++++++++++-----------------------
1 file changed, 21 insertions(+), 23 deletions(-)
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 294a08cfe..030a16e77 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -124,15 +124,22 @@ invalid_variable_name='${foo.bar}'
actual="$TRASH_DIRECTORY/actual"
+if test_have_prereq MINGW
+then
+ ROOT="$(pwd -W)"
+else
+ ROOT="$(pwd)"
+fi
+
test_expect_success 'setup for __gitdir tests' '
mkdir -p subdir/subsubdir &&
git init otherrepo
'
test_expect_success '__gitdir - from command line (through $__git_dir)' '
- echo "$TRASH_DIRECTORY/otherrepo/.git" >expected &&
+ echo "$ROOT/otherrepo/.git" >expected &&
(
- __git_dir="$TRASH_DIRECTORY/otherrepo/.git" &&
+ __git_dir="$ROOT/otherrepo/.git" &&
__gitdir >"$actual"
) &&
test_cmp expected "$actual"
@@ -157,7 +164,7 @@ test_expect_success '__gitdir - .git directory in cwd' '
'
test_expect_success '__gitdir - .git directory in parent' '
- echo "$(pwd -P)/.git" >expected &&
+ echo "$ROOT/.git" >expected &&
(
cd subdir/subsubdir &&
__gitdir >"$actual"
@@ -175,7 +182,7 @@ test_expect_success '__gitdir - cwd is a .git directory' '
'
test_expect_success '__gitdir - parent is a .git directory' '
- echo "$(pwd -P)/.git" >expected &&
+ echo "$ROOT/.git" >expected &&
(
cd .git/refs/heads &&
__gitdir >"$actual"
@@ -184,9 +191,9 @@ test_expect_success '__gitdir - parent is a .git directory' '
'
test_expect_success '__gitdir - $GIT_DIR set while .git directory in cwd' '
- echo "$TRASH_DIRECTORY/otherrepo/.git" >expected &&
+ echo "$ROOT/otherrepo/.git" >expected &&
(
- GIT_DIR="$TRASH_DIRECTORY/otherrepo/.git" &&
+ GIT_DIR="$ROOT/otherrepo/.git" &&
export GIT_DIR &&
__gitdir >"$actual"
) &&
@@ -194,9 +201,9 @@ test_expect_success '__gitdir - $GIT_DIR set while .git directory in cwd' '
'
test_expect_success '__gitdir - $GIT_DIR set while .git directory in parent' '
- echo "$TRASH_DIRECTORY/otherrepo/.git" >expected &&
+ echo "$ROOT/otherrepo/.git" >expected &&
(
- GIT_DIR="$TRASH_DIRECTORY/otherrepo/.git" &&
+ GIT_DIR="$ROOT/otherrepo/.git" &&
export GIT_DIR &&
cd subdir &&
__gitdir >"$actual"
@@ -206,24 +213,15 @@ test_expect_success '__gitdir - $GIT_DIR set while .git directory in parent' '
test_expect_success '__gitdir - non-existing $GIT_DIR' '
(
- GIT_DIR="$TRASH_DIRECTORY/non-existing" &&
+ GIT_DIR="$ROOT/non-existing" &&
export GIT_DIR &&
test_must_fail __gitdir
)
'
-function pwd_P_W () {
- if test_have_prereq MINGW
- then
- pwd -W
- else
- pwd -P
- fi
-}
-
test_expect_success '__gitdir - gitfile in cwd' '
- echo "$(pwd_P_W)/otherrepo/.git" >expected &&
- echo "gitdir: $(pwd_P_W)/otherrepo/.git" >subdir/.git &&
+ echo "$ROOT/otherrepo/.git" >expected &&
+ echo "gitdir: $ROOT/otherrepo/.git" >subdir/.git &&
test_when_finished "rm -f subdir/.git" &&
(
cd subdir &&
@@ -233,8 +231,8 @@ test_expect_success '__gitdir - gitfile in cwd' '
'
test_expect_success '__gitdir - gitfile in parent' '
- echo "$(pwd_P_W)/otherrepo/.git" >expected &&
- echo "gitdir: $(pwd_P_W)/otherrepo/.git" >subdir/.git &&
+ echo "$ROOT/otherrepo/.git" >expected &&
+ echo "gitdir: $ROOT/otherrepo/.git" >subdir/.git &&
test_when_finished "rm -f subdir/.git" &&
(
cd subdir/subsubdir &&
@@ -244,7 +242,7 @@ test_expect_success '__gitdir - gitfile in parent' '
'
test_expect_success SYMLINKS '__gitdir - resulting path avoids symlinks' '
- echo "$(pwd -P)/otherrepo/.git" >expected &&
+ echo "$ROOT/otherrepo/.git" >expected &&
mkdir otherrepo/dir &&
test_when_finished "rm -rf otherrepo/dir" &&
ln -s otherrepo/dir link &&
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 05/21] completion tests: check __gitdir()'s output in the error cases
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
The __gitdir() helper function shouldn't output anything if not in a
git repository. The relevant tests only checked its error code, so
extend them to ensure that there's no output.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
t/t9902-completion.sh | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 030a16e77..f7f7d49fb 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -215,8 +215,9 @@ test_expect_success '__gitdir - non-existing $GIT_DIR' '
(
GIT_DIR="$ROOT/non-existing" &&
export GIT_DIR &&
- test_must_fail __gitdir
- )
+ test_must_fail __gitdir >"$actual"
+ ) &&
+ test_must_be_empty "$actual"
'
test_expect_success '__gitdir - gitfile in cwd' '
@@ -255,7 +256,8 @@ test_expect_success SYMLINKS '__gitdir - resulting path avoids symlinks' '
'
test_expect_success '__gitdir - not a git repository' '
- nongit test_must_fail __gitdir
+ nongit test_must_fail __gitdir >"$actual" &&
+ test_must_be_empty "$actual"
'
test_expect_success '__gitcomp - trailing space - options' '
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 03/21] completion tests: make the $cur variable local to the test helper functions
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
The test helper functions test_gitcomp() and test_gitcomp_nl() leak
the $cur variable into the test environment. Since this variable has
a special role in the Bash completion script (it holds the word
currently being completed) it influences the behavior of most
completion functions and thus this leakage could interfere with
subsequent tests. Although there are no such issues in the current
tests, early versions of the new tests that will be added later in
this series suffered because of this.
It's better to play safe and declare $cur local in those test helper
functions. 'local' is bashism, of course, but the tests of the Bash
completion script are run under Bash anyway, and there are already
other variables declared local in this test script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
t/t9902-completion.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index f490c1d05..294a08cfe 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -98,7 +98,7 @@ test_gitcomp ()
{
local -a COMPREPLY &&
sed -e 's/Z$//' >expected &&
- cur="$1" &&
+ local cur="$1" &&
shift &&
__gitcomp "$@" &&
print_comp &&
@@ -113,7 +113,7 @@ test_gitcomp_nl ()
{
local -a COMPREPLY &&
sed -e 's/Z$//' >expected &&
- cur="$1" &&
+ local cur="$1" &&
shift &&
__gitcomp_nl "$@" &&
print_comp &&
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 11/21] completion: don't list 'HEAD' when trying refs completion outside of a repo
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
When refs completion is attempted while not in a git repository, the
completion script offers 'HEAD' erroneously.
Check early in __git_refs() that there is either a repository or a
remote to work on, and return early if neither is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 8 ++++++--
t/t9902-completion.sh | 2 +-
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index fd0ba1f3b..6b489b7c8 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -346,7 +346,11 @@ __git_refs ()
local list_refs_from=path remote="${1-}"
local format refs pfx
- if [ -n "$remote" ]; then
+ if [ -z "$remote" ]; then
+ if [ -z "$dir" ]; then
+ return
+ fi
+ else
if __git_is_configured_remote "$remote"; then
# configured remote takes precedence over a
# local directory with the same name
@@ -360,7 +364,7 @@ __git_refs ()
fi
fi
- if [ "$list_refs_from" = path ] && [ -d "$dir" ]; then
+ if [ "$list_refs_from" = path ]; then
case "$cur" in
refs|refs/*)
format="refname"
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index a201b5212..5b4defaa5 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -599,7 +599,7 @@ test_expect_success '__git_refs - non-existing URL remote - full refs' '
test_must_be_empty "$actual"
'
-test_expect_failure '__git_refs - not in a git repository' '
+test_expect_success '__git_refs - not in a git repository' '
(
GIT_CEILING_DIRECTORIES="$ROOT" &&
export GIT_CEILING_DIRECTORIES &&
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 12/21] completion: list short refs from a remote given as a URL
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
e832f5c09680 (completion: avoid ls-remote in certain scenarios,
2013-05-28) turned a 'git ls-remote <remote>' query into a 'git
for-each-ref refs/remotes/<remote>/' to improve responsiveness of
remote refs completion by avoiding potential network communication.
However, it inadvertently made impossible to complete short refs from
a remote given as a URL, e.g. 'git fetch git://server.com/repo.git
<TAB>', because there is, of course, no such thing as
'refs/remotes/git://server.com/repo.git'.
Since the previous commit we tell apart configured remotes, i.e. those
that can have a hierarchy under 'refs/remotes/', from others that
don't, including remotes given as URL, so we know when we can't use
the faster 'git for-each-ref'-based approach.
Resurrect the old, pre-e832f5c09680 'git ls-remote'-based code for the
latter case to support listing short refs from remotes given as a URL.
The code is slightly updated from the original to
- take into account the path to the repository given on the command
line (if any), and
- omit 'ORIG_HEAD' from the query, as 'git ls-remote' will never
list it anyway.
When the remote given to __git_refs() doesn't exist, then it will be
handled by this resurrected 'git ls-remote' query. This code path
doesn't list 'HEAD' unconditionally, which has the nice side effect of
fixing two more expected test failures.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 19 ++++++++++++++++---
t/t9902-completion.sh | 6 +++---
2 files changed, 19 insertions(+), 6 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 6b489b7c8..4ded44977 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -338,6 +338,7 @@ __git_tags ()
# Lists refs from the local (by default) or from a remote repository.
# It accepts 0, 1 or 2 arguments:
# 1: The remote to list refs from (optional; ignored, if set but empty).
+# Can be the name of a configured remote, a path, or a URL.
# 2: In addition to local refs, list unique branches from refs/remotes/ for
# 'git checkout's tracking DWIMery (optional; ignored, if set but empty).
__git_refs ()
@@ -410,9 +411,21 @@ __git_refs ()
done
;;
*)
- echo "HEAD"
- git --git-dir="$dir" for-each-ref --format="%(refname:short)" \
- "refs/remotes/$remote/" 2>/dev/null | sed -e "s#^$remote/##"
+ if [ "$list_refs_from" = remote ]; then
+ echo "HEAD"
+ git --git-dir="$dir" for-each-ref --format="%(refname:short)" \
+ "refs/remotes/$remote/" 2>/dev/null | sed -e "s#^$remote/##"
+ else
+ git --git-dir="$dir" ls-remote "$remote" HEAD \
+ "refs/tags/*" "refs/heads/*" "refs/remotes/*" 2>/dev/null |
+ while read -r hash i; do
+ case "$i" in
+ *^{}) ;;
+ refs/*) echo "${i#refs/*/}" ;;
+ *) echo "$i" ;; # symbolic refs
+ esac
+ done
+ fi
;;
esac
}
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 5b4defaa5..500505dca 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -540,7 +540,7 @@ test_expect_success '__git_refs - configured remote - remote name matches a dire
test_cmp expected "$actual"
'
-test_expect_failure '__git_refs - URL remote' '
+test_expect_success '__git_refs - URL remote' '
cat >expected <<-EOF &&
HEAD
branch-in-other
@@ -567,7 +567,7 @@ test_expect_success '__git_refs - URL remote - full refs' '
test_cmp expected "$actual"
'
-test_expect_failure '__git_refs - non-existing remote' '
+test_expect_success '__git_refs - non-existing remote' '
(
cur= &&
__git_refs non-existing >"$actual"
@@ -583,7 +583,7 @@ test_expect_success '__git_refs - non-existing remote - full refs' '
test_must_be_empty "$actual"
'
-test_expect_failure '__git_refs - non-existing URL remote' '
+test_expect_success '__git_refs - non-existing URL remote' '
(
cur= &&
__git_refs "file://$ROOT/non-existing" >"$actual"
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 07/21] completion: ensure that the repository path given on the command line exists
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
The __gitdir() helper function prints the path to the git repository
to its stdout or stays silent and returns with error when it can't
find a repository or when the repository given via $GIT_DIR doesn't
exist.
This is not the case, however, when the path in $__git_dir, i.e. the
path to the repository specified on the command line via 'git
--git-dir=<path>', doesn't exist: __gitdir() still outputs it as if it
were a real existing repository, making some completion functions
believe that they operate on an existing repository.
Check that the path in $__git_dir exists and return with error without
printing anything to stdout if it doesn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 1 +
t/t9902-completion.sh | 8 ++++++++
2 files changed, 9 insertions(+)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index ee6fb2259..5b2bd6721 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -40,6 +40,7 @@ __gitdir ()
{
if [ -z "${1-}" ]; then
if [ -n "${__git_dir-}" ]; then
+ test -d "$__git_dir" || return 1
echo "$__git_dir"
elif [ -n "${GIT_DIR-}" ]; then
test -d "${GIT_DIR-}" || return 1
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 7956cb9b1..7667baabf 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -211,6 +211,14 @@ test_expect_success '__gitdir - $GIT_DIR set while .git directory in parent' '
test_cmp expected "$actual"
'
+test_expect_success '__gitdir - non-existing path in $__git_dir' '
+ (
+ __git_dir="non-existing" &&
+ test_must_fail __gitdir >"$actual"
+ ) &&
+ test_must_be_empty "$actual"
+'
+
test_expect_success '__gitdir - non-existing $GIT_DIR' '
(
GIT_DIR="$ROOT/non-existing" &&
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 16/21] completion: respect 'git -C <path>'
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
'git -C <path>' option(s) on the command line should be taken into
account during completion, because
- like '--git-dir=<path>', it can lead us to a different repository,
- a few git commands executed in the completion script do care about
in which directory they are executed, and
- the command for which we are providing completion might care about
in which directory it will be executed.
However, unlike '--git-dir=<path>', the '-C <path>' option can be
specified multiple times and their effect is cumulative, so we can't
just store a single '<path>' in a variable. Nor can we simply
concatenate a path from '-C <path1> -C <path2> ...', because e.g. (in
an arguably pathological corner case) a relative path might be
followed by an absolute path.
Instead, store all '-C <path>' options word by word in the
$__git_C_args array in the main git completion function, and pass this
array, if present, to 'git rev-parse --absolute-git-dir' when
discovering the repository in __gitdir(), and let it take care of
multiple options, relative paths, absolute paths and everything.
Also pass all '-C <path> options via the $__git_C_args array to those
git executions which require a worktree and for which it matters from
which directory they are executed from. There are only three such
cases:
- 'git diff-index' and 'git ls-files' in __git_ls_files_helper()
used for git-aware filename completion, and
- the 'git ls-tree' used for completing the 'ref:path' notation.
The other git commands executed in the completion script don't need
these '-C <path>' options, because __gitdir() already took those
options into account. It would not hurt them, either, but let's not
induce unnecessary code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 19 ++++++--
t/t9902-completion.sh | 87 ++++++++++++++++++++++++++++++++++
2 files changed, 101 insertions(+), 5 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index ac5eb9ced..e003afd54 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -39,7 +39,11 @@ esac
__gitdir ()
{
if [ -z "${1-}" ]; then
- if [ -n "${__git_dir-}" ]; then
+ if [ -n "${__git_C_args-}" ]; then
+ git "${__git_C_args[@]}" \
+ ${__git_dir:+--git-dir="$__git_dir"} \
+ rev-parse --absolute-git-dir 2>/dev/null
+ elif [ -n "${__git_dir-}" ]; then
test -d "$__git_dir" || return 1
echo "$__git_dir"
elif [ -n "${GIT_DIR-}" ]; then
@@ -286,10 +290,10 @@ __git_ls_files_helper ()
local dir="$(__gitdir)"
if [ "$2" == "--committable" ]; then
- git --git-dir="$dir" -C "$1" diff-index --name-only --relative HEAD
+ git ${__git_C_args:+"${__git_C_args[@]}"} --git-dir="$dir" -C "$1" diff-index --name-only --relative HEAD
else
# NOTE: $2 is not quoted in order to support multiple options
- git --git-dir="$dir" -C "$1" ls-files --exclude-standard $2
+ git ${__git_C_args:+"${__git_C_args[@]}"} --git-dir="$dir" -C "$1" ls-files --exclude-standard $2
fi 2>/dev/null
}
@@ -519,7 +523,7 @@ __git_complete_revlist_file ()
*) pfx="$ref:$pfx" ;;
esac
- __gitcomp_nl "$(git --git-dir="$(__gitdir)" ls-tree "$ls" 2>/dev/null \
+ __gitcomp_nl "$(git ${__git_C_args:+"${__git_C_args[@]}"} --git-dir="$(__gitdir)" ls-tree "$ls" 2>/dev/null \
| sed '/^100... blob /{
s,^.* ,,
s,$, ,
@@ -2792,6 +2796,7 @@ _git_worktree ()
__git_main ()
{
local i c=1 command __git_dir
+ local __git_C_args C_args_count=0
while [ $c -lt $cword ]; do
i="${words[c]}"
@@ -2800,7 +2805,11 @@ __git_main ()
--git-dir) ((c++)) ; __git_dir="${words[c]}" ;;
--bare) __git_dir="." ;;
--help) command="help"; break ;;
- -c|-C|--work-tree|--namespace) ((c++)) ;;
+ -c|--work-tree|--namespace) ((c++)) ;;
+ -C) __git_C_args[C_args_count++]=-C
+ ((c++))
+ __git_C_args[C_args_count++]="${words[c]}"
+ ;;
-*) ;;
*) command="$i"; break ;;
esac
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index be2ed8704..984df05b2 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -211,6 +211,87 @@ test_expect_success '__gitdir - $GIT_DIR set while .git directory in parent' '
test_cmp expected "$actual"
'
+test_expect_success '__gitdir - from command line while "git -C"' '
+ echo "$ROOT/.git" >expected &&
+ (
+ __git_dir="$ROOT/.git" &&
+ __git_C_args=(-C otherrepo) &&
+ __gitdir >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success '__gitdir - relative dir from command line and "git -C"' '
+ echo "$ROOT/otherrepo/.git" >expected &&
+ (
+ cd subdir &&
+ __git_dir="otherrepo/.git" &&
+ __git_C_args=(-C ..) &&
+ __gitdir >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success '__gitdir - $GIT_DIR set while "git -C"' '
+ echo "$ROOT/.git" >expected &&
+ (
+ GIT_DIR="$ROOT/.git" &&
+ export GIT_DIR &&
+ __git_C_args=(-C otherrepo) &&
+ __gitdir >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success '__gitdir - relative dir in $GIT_DIR and "git -C"' '
+ echo "$ROOT/otherrepo/.git" >expected &&
+ (
+ cd subdir &&
+ GIT_DIR="otherrepo/.git" &&
+ export GIT_DIR &&
+ __git_C_args=(-C ..) &&
+ __gitdir >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success '__gitdir - "git -C" while .git directory in cwd' '
+ echo "$ROOT/otherrepo/.git" >expected &&
+ (
+ __git_C_args=(-C otherrepo) &&
+ __gitdir >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success '__gitdir - "git -C" while cwd is a .git directory' '
+ echo "$ROOT/otherrepo/.git" >expected &&
+ (
+ cd .git &&
+ __git_C_args=(-C .. -C otherrepo) &&
+ __gitdir >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success '__gitdir - "git -C" while .git directory in parent' '
+ echo "$ROOT/otherrepo/.git" >expected &&
+ (
+ cd subdir &&
+ __git_C_args=(-C .. -C otherrepo) &&
+ __gitdir >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success '__gitdir - non-existing path in "git -C"' '
+ (
+ __git_C_args=(-C non-existing) &&
+ test_must_fail __gitdir >"$actual"
+ ) &&
+ test_must_be_empty "$actual"
+'
+
test_expect_success '__gitdir - non-existing path in $__git_dir' '
(
__git_dir="non-existing" &&
@@ -785,6 +866,12 @@ test_expect_success 'checkout completes ref names' '
EOF
'
+test_expect_success 'git -C <path> checkout uses the right repo' '
+ test_completion "git -C subdir -C subsubdir -C .. -C ../otherrepo checkout b" <<-\EOF
+ branch-in-other Z
+ EOF
+'
+
test_expect_success 'show completes all refs' '
test_completion "git show m" <<-\EOF
master Z
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 08/21] completion: fix most spots not respecting 'git --git-dir=<path>'
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
The completion script already respects the path to the repository
specified on the command line most of the time, here we add the
necessary '--git-dir=$(__gitdir)' options to most of the places where
git was executed without it. The exceptions where said option is not
added are the git invocations:
- in __git_refs() which are non-trivial and will be the subject of
the following patch,
- getting the list of git commands, merge strategies and archive
formats, because these are independent from the repository and
thus don't need it, and
- the 'git rev-parse --git-dir' in __gitdir() itself.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 5b2bd6721..295f6de24 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -283,11 +283,13 @@ __gitcomp_file ()
# argument, and using the options specified in the second argument.
__git_ls_files_helper ()
{
+ local dir="$(__gitdir)"
+
if [ "$2" == "--committable" ]; then
- git -C "$1" diff-index --name-only --relative HEAD
+ git --git-dir="$dir" -C "$1" diff-index --name-only --relative HEAD
else
# NOTE: $2 is not quoted in order to support multiple options
- git -C "$1" ls-files --exclude-standard $2
+ git --git-dir="$dir" -C "$1" ls-files --exclude-standard $2
fi 2>/dev/null
}
@@ -408,7 +410,7 @@ __git_refs2 ()
__git_refs_remotes ()
{
local i hash
- git ls-remote "$1" 'refs/heads/*' 2>/dev/null | \
+ git --git-dir="$(__gitdir)" ls-remote "$1" 'refs/heads/*' 2>/dev/null | \
while read -r hash i; do
echo "$i:refs/remotes/$1/${i#refs/heads/}"
done
@@ -1186,7 +1188,7 @@ _git_commit ()
return
esac
- if git rev-parse --verify --quiet HEAD >/dev/null; then
+ if git --git-dir="$(__gitdir)" rev-parse --verify --quiet HEAD >/dev/null; then
__git_complete_index_file "--committable"
else
# This is the first commit
@@ -1486,7 +1488,7 @@ _git_log ()
{
__git_has_doubledash && return
- local g="$(git rev-parse --git-dir 2>/dev/null)"
+ local g="$(__gitdir)"
local merge=""
if [ -f "$g/MERGE_HEAD" ]; then
merge="--merge"
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 15/21] rev-parse: add '--absolute-git-dir' option
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
The output of 'git rev-parse --git-dir' can be either a relative or an
absolute path, depending on whether the current working directory is
at the top of the worktree or the .git directory or not, or how the
path to the repository is specified via the '--git-dir=<path>' option
or the $GIT_DIR environment variable. And if that output is a
relative path, then it is relative to the directory where any 'git
-C <path>' options might have led us.
This doesn't matter at all for regular scripts, because the git
wrapper automatically takes care of changing directories according to
the '-C <path>' options, and the scripts can then simply follow any
path returned by 'git rev-parse --git-dir', even if it's a relative
path.
Our Bash completion script, however, is unique in that it must run
directly in the user's interactive shell environment. This means that
it's not executed through the git wrapper and would have to take care
of any '-C <path> options on its own, and it can't just change
directories as it pleases. Consequently, adding support for taking
any '-C <path>' options on the command line into account during
completion turned out to be considerably more difficult, error prone
and required more subshells and git processes when it had to cope with
a relative path to the .git directory.
Help this rather special use case and teach 'git rev-parse' a new
'--absolute-git-dir' option which always outputs a canonicalized
absolute path to the .git directory, regardless of whether the path is
discovered automatically or is specified via $GIT_DIR or 'git
--git-dir=<path>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
Documentation/git-rev-parse.txt | 4 ++++
builtin/rev-parse.c | 26 ++++++++++++++++++--------
t/t1500-rev-parse.sh | 17 +++++++++--------
3 files changed, 31 insertions(+), 16 deletions(-)
diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt
index 7241e9689..91c02b8c8 100644
--- a/Documentation/git-rev-parse.txt
+++ b/Documentation/git-rev-parse.txt
@@ -217,6 +217,10 @@ If `$GIT_DIR` is not defined and the current directory
is not detected to lie in a Git repository or work tree
print a message to stderr and exit with nonzero status.
+--absolute-git-dir::
+ Like `--git-dir`, but its output is always the canonicalized
+ absolute path.
+
--git-common-dir::
Show `$GIT_COMMON_DIR` if defined, else `$GIT_DIR`.
diff --git a/builtin/rev-parse.c b/builtin/rev-parse.c
index ff13e59e1..1967bafba 100644
--- a/builtin/rev-parse.c
+++ b/builtin/rev-parse.c
@@ -802,17 +802,27 @@ int cmd_rev_parse(int argc, const char **argv, const char *prefix)
putchar('\n');
continue;
}
- if (!strcmp(arg, "--git-dir")) {
+ if (!strcmp(arg, "--git-dir") ||
+ !strcmp(arg, "--absolute-git-dir")) {
const char *gitdir = getenv(GIT_DIR_ENVIRONMENT);
char *cwd;
int len;
- if (gitdir) {
- puts(gitdir);
- continue;
- }
- if (!prefix) {
- puts(".git");
- continue;
+ if (arg[2] == 'g') { /* --git-dir */
+ if (gitdir) {
+ puts(gitdir);
+ continue;
+ }
+ if (!prefix) {
+ puts(".git");
+ continue;
+ }
+ } else { /* --absolute-git-dir */
+ if (!gitdir && !prefix)
+ gitdir = ".git";
+ if (gitdir) {
+ puts(real_path(gitdir));
+ continue;
+ }
}
cwd = xgetcwd();
len = strlen(cwd);
diff --git a/t/t1500-rev-parse.sh b/t/t1500-rev-parse.sh
index 038e24c40..8b62ed85b 100755
--- a/t/t1500-rev-parse.sh
+++ b/t/t1500-rev-parse.sh
@@ -3,7 +3,7 @@
test_description='test git rev-parse'
. ./test-lib.sh
-# usage: [options] label is-bare is-inside-git is-inside-work prefix git-dir
+# usage: [options] label is-bare is-inside-git is-inside-work prefix git-dir absolute-git-dir
test_rev_parse () {
d=
bare=
@@ -29,7 +29,8 @@ test_rev_parse () {
--is-inside-git-dir \
--is-inside-work-tree \
--show-prefix \
- --git-dir
+ --git-dir \
+ --absolute-git-dir
do
test $# -eq 0 && break
expect="$1"
@@ -62,26 +63,26 @@ test_expect_success 'setup' '
cp -R .git repo.git
'
-test_rev_parse toplevel false false true '' .git
+test_rev_parse toplevel false false true '' .git "$ROOT/.git"
-test_rev_parse -C .git .git/ false true false '' .
-test_rev_parse -C .git/objects .git/objects/ false true false '' "$ROOT/.git"
+test_rev_parse -C .git .git/ false true false '' . "$ROOT/.git"
+test_rev_parse -C .git/objects .git/objects/ false true false '' "$ROOT/.git" "$ROOT/.git"
-test_rev_parse -C sub/dir subdirectory false false true sub/dir/ "$ROOT/.git"
+test_rev_parse -C sub/dir subdirectory false false true sub/dir/ "$ROOT/.git" "$ROOT/.git"
test_rev_parse -b t 'core.bare = true' true false false
test_rev_parse -b u 'core.bare undefined' false false true
-test_rev_parse -C work -g ../.git -b f 'GIT_DIR=../.git, core.bare = false' false false true ''
+test_rev_parse -C work -g ../.git -b f 'GIT_DIR=../.git, core.bare = false' false false true '' "../.git" "$ROOT/.git"
test_rev_parse -C work -g ../.git -b t 'GIT_DIR=../.git, core.bare = true' true false false ''
test_rev_parse -C work -g ../.git -b u 'GIT_DIR=../.git, core.bare undefined' false false true ''
-test_rev_parse -C work -g ../repo.git -b f 'GIT_DIR=../repo.git, core.bare = false' false false true ''
+test_rev_parse -C work -g ../repo.git -b f 'GIT_DIR=../repo.git, core.bare = false' false false true '' "../repo.git" "$ROOT/repo.git"
test_rev_parse -C work -g ../repo.git -b t 'GIT_DIR=../repo.git, core.bare = true' true false false ''
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 18/21] completion: consolidate silencing errors from git commands
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
Outputting error messages during completion is bad: they disrupt the
command line, can't be deleted, and the user is forced to Ctrl-C and
start over most of the time. We already silence stderr of many git
commands in our Bash completion script, but there are still some in
there that can spew error messages when something goes wrong.
We could add the missing stderr redirections to all the remaining
places, but instead let's leverage that git commands are now executed
through the previously introduced __git() wrapper function, and
redirect standard error to /dev/null only in that function. This way
we need only one redirection to take care of errors from almost all
git commands. Redirecting standard error of the __git() wrapper
function thus became redundant, remove them.
The exceptions, i.e. the repo-independent git executions and those in
the __gitdir() function that don't go through __git() already have
their standard error silenced.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index e7c0b56ea..1a849761f 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -66,7 +66,7 @@ __gitdir ()
__git ()
{
git ${__git_C_args:+"${__git_C_args[@]}"} \
- ${__git_dir:+--git-dir="$__git_dir"} "$@"
+ ${__git_dir:+--git-dir="$__git_dir"} "$@" 2>/dev/null
}
# The following function is based on code from:
@@ -300,7 +300,7 @@ __git_ls_files_helper ()
else
# NOTE: $2 is not quoted in order to support multiple options
__git -C "$1" ls-files --exclude-standard $2
- fi 2>/dev/null
+ fi
}
@@ -410,7 +410,7 @@ __git_refs ()
fi
case "$cur" in
refs|refs/*)
- __git ls-remote "$remote" "$cur*" 2>/dev/null | \
+ __git ls-remote "$remote" "$cur*" | \
while read -r hash i; do
case "$i" in
*^{}) ;;
@@ -422,10 +422,10 @@ __git_refs ()
if [ "$list_refs_from" = remote ]; then
echo "HEAD"
__git for-each-ref --format="%(refname:short)" \
- "refs/remotes/$remote/" 2>/dev/null | sed -e "s#^$remote/##"
+ "refs/remotes/$remote/" | sed -e "s#^$remote/##"
else
__git ls-remote "$remote" HEAD \
- "refs/tags/*" "refs/heads/*" "refs/remotes/*" 2>/dev/null |
+ "refs/tags/*" "refs/heads/*" "refs/remotes/*" |
while read -r hash i; do
case "$i" in
*^{}) ;;
@@ -451,7 +451,7 @@ __git_refs2 ()
__git_refs_remotes ()
{
local i hash
- __git ls-remote "$1" 'refs/heads/*' 2>/dev/null | \
+ __git ls-remote "$1" 'refs/heads/*' | \
while read -r hash i; do
echo "$i:refs/remotes/$1/${i#refs/heads/}"
done
@@ -527,7 +527,7 @@ __git_complete_revlist_file ()
*) pfx="$ref:$pfx" ;;
esac
- __gitcomp_nl "$(__git ls-tree "$ls" 2>/dev/null \
+ __gitcomp_nl "$(__git ls-tree "$ls" \
| sed '/^100... blob /{
s,^.* ,,
s,$, ,
@@ -805,7 +805,7 @@ __git_compute_porcelain_commands ()
__git_get_config_variables ()
{
local section="$1" i IFS=$'\n'
- for i in $(__git config --name-only --get-regexp "^$section\..*" 2>/dev/null); do
+ for i in $(__git config --name-only --get-regexp "^$section\..*"); do
echo "${i#$section.}"
done
}
@@ -823,7 +823,7 @@ __git_aliases ()
# __git_aliased_command requires 1 argument
__git_aliased_command ()
{
- local word cmdline=$(__git config --get "alias.$1" 2>/dev/null)
+ local word cmdline=$(__git config --get "alias.$1")
for word in $cmdline; do
case "$word" in
\!gitk|gitk)
@@ -1841,9 +1841,7 @@ _git_send_email ()
{
case "$prev" in
--to|--cc|--bcc|--from)
- __gitcomp "
- $(__git send-email --dump-aliases 2>/dev/null)
- "
+ __gitcomp "$(__git send-email --dump-aliases)"
return
;;
esac
@@ -1873,9 +1871,7 @@ _git_send_email ()
return
;;
--to=*|--cc=*|--bcc=*|--from=*)
- __gitcomp "
- $(__git send-email --dump-aliases 2>/dev/null)
- " "" "${cur#--*=}"
+ __gitcomp "$(__git send-email --dump-aliases)" "" "${cur#--*=}"
return
;;
--*)
@@ -1969,7 +1965,7 @@ __git_config_get_set_variables ()
c=$((--c))
done
- __git config $config_file --name-only --list 2>/dev/null
+ __git config $config_file --name-only --list
}
_git_config ()
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 19/21] completion: don't guard git executions with __gitdir()
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
Three completion functions, namely __git_index_files(), __git_heads()
and __git_tags(), first run __gitdir() and check that the path it
outputs exists, i.e. that there is a git repository, and run a git
command only if there is one.
After the previous changes in this series there are no further uses of
__gitdir()'s output in these functions besides those checks. And
those checks are unnecessary, because we can just execute those git
commands outside of a repository and let them error out. We don't
perform such a check in other places either.
Remove this check and the __gitdir() call from these functions,
sparing the fork()+exec() overhead of the command substitution and the
potential 'git rev-parse' execution.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 32 +++++++++++---------------------
1 file changed, 11 insertions(+), 21 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 1a849761f..1c7493ff2 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -312,35 +312,25 @@ __git_ls_files_helper ()
# slash.
__git_index_files ()
{
- local dir="$(__gitdir)" root="${2-.}" file
-
- if [ -d "$dir" ]; then
- __git_ls_files_helper "$root" "$1" |
- while read -r file; do
- case "$file" in
- ?*/*) echo "${file%%/*}" ;;
- *) echo "$file" ;;
- esac
- done | sort | uniq
- fi
+ local root="${2-.}" file
+
+ __git_ls_files_helper "$root" "$1" |
+ while read -r file; do
+ case "$file" in
+ ?*/*) echo "${file%%/*}" ;;
+ *) echo "$file" ;;
+ esac
+ done | sort | uniq
}
__git_heads ()
{
- local dir="$(__gitdir)"
- if [ -d "$dir" ]; then
- __git for-each-ref --format='%(refname:short)' refs/heads
- return
- fi
+ __git for-each-ref --format='%(refname:short)' refs/heads
}
__git_tags ()
{
- local dir="$(__gitdir)"
- if [ -d "$dir" ]; then
- __git for-each-ref --format='%(refname:short)' refs/tags
- return
- fi
+ __git for-each-ref --format='%(refname:short)' refs/tags
}
# Lists refs from the local (by default) or from a remote repository.
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 10/21] completion: list refs from remote when remote's name matches a directory
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
If the remote given to __git_refs() happens to match both the name of
a configured remote and the name of a directory in the current working
directory, then that directory is assumed to be a git repository, and
listing refs from that directory will be attempted. This is wrong,
because in such a situation git commands (e.g. 'git fetch|pull|push
<remote>' whom these refs will eventually be passed to) give
precedence to the configured remote. Therefore, __git_refs() should
list refs from the configured remote as well.
Add the helper function __git_is_configured_remote() that checks
whether its argument matches the name of a configured remote. Use
this helper to decide how to handle the remote passed to __git_refs().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 20 ++++++++++++++++++--
t/t9902-completion.sh | 11 ++++++++++-
2 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 7d7e8b9d9..fd0ba1f3b 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -347,12 +347,16 @@ __git_refs ()
local format refs pfx
if [ -n "$remote" ]; then
- if [ -d "$remote/.git" ]; then
+ if __git_is_configured_remote "$remote"; then
+ # configured remote takes precedence over a
+ # local directory with the same name
+ list_refs_from=remote
+ elif [ -d "$remote/.git" ]; then
dir="$remote/.git"
elif [ -d "$remote" ]; then
dir="$remote"
else
- list_refs_from=remote
+ list_refs_from=url
fi
fi
@@ -435,6 +439,18 @@ __git_remotes ()
git --git-dir="$d" remote
}
+# Returns true if $1 matches the name of a configured remote, false otherwise.
+__git_is_configured_remote ()
+{
+ local remote
+ for remote in $(__git_remotes); do
+ if [ "$remote" = "$1" ]; then
+ return 0
+ fi
+ done
+ return 1
+}
+
__git_list_merge_strategies ()
{
git merge -s help 2>&1 |
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 6e64cd6ba..a201b5212 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -373,6 +373,15 @@ test_expect_success '__git_remotes - list remotes from $GIT_DIR/remotes and from
test_cmp expect actual
'
+test_expect_success '__git_is_configured_remote' '
+ test_when_finished "git remote remove remote_1" &&
+ git remote add remote_1 git://remote_1 &&
+ test_when_finished "git remote remove remote_2" &&
+ git remote add remote_2 git://remote_2 &&
+ verbose __git_is_configured_remote remote_2 &&
+ test_must_fail __git_is_configured_remote non-existent
+'
+
test_expect_success 'setup for ref completion' '
git commit --allow-empty -m initial &&
git branch matching-branch &&
@@ -516,7 +525,7 @@ test_expect_success '__git_refs - configured remote - full refs - repo given on
test_cmp expected "$actual"
'
-test_expect_failure '__git_refs - configured remote - remote name matches a directory' '
+test_expect_success '__git_refs - configured remote - remote name matches a directory' '
cat >expected <<-EOF &&
HEAD
branch-in-other
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 17/21] completion: don't use __gitdir() for git commands
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
Several completion functions contain the following pattern to run git
commands respecting the path to the repository specified on the
command line:
git --git-dir="$(__gitdir)" <cmd> <options>
This imposes the overhead of fork()ing a subshell for the command
substitution and potentially fork()+exec()ing 'git rev-parse' inside
__gitdir().
Now, if neither '--gitdir=<path>' nor '-C <path>' options are
specified on the command line, then those git commands are perfectly
capable to discover the repository on their own. If either one or
both of those options are specified on the command line, then, again,
the git commands could discover the repository, if we pass them all of
those options from the command line.
This means we don't have to run __gitdir() at all for git commands and
can spare its fork()+exec() overhead.
Use Bash parameter expansions to check the $__git_dir variable and
$__git_C_args array and to assemble the appropriate '--git-dir=<path>'
and '-C <path>' options if either one or both are present on the
command line. These parameter expansions are, however, rather long,
so instead of changing all git executions and make already long lines
even longer, encapsulate running git with '--git-dir=<path> -C <path>'
options into the new __git() wrapper function. Furthermore, this
wrapper function will also enable us to silence error messages from
git commands uniformly in one place in a later commit.
There's one tricky case, though: in __git_refs() local refs are listed
with 'git for-each-ref', where "local" is not necessarily the
repository we are currently in, but it might mean a remote repository
in the filesystem (e.g. listing refs for 'git fetch /some/other/repo
<TAB>'). Use one-shot variable assignment to override $__git_dir with
the path of the repository where the refs should come from. Although
one-shot variable assignments in front of shell functions are to be
avoided in our scripts in general, in the Bash completion script we
can do that safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 60 ++++++++++++++++++----------------
1 file changed, 31 insertions(+), 29 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index e003afd54..e7c0b56ea 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -61,6 +61,14 @@ __gitdir ()
fi
}
+# Runs git with all the options given as argument, respecting any
+# '--git-dir=<path>' and '-C <path>' options present on the command line
+__git ()
+{
+ git ${__git_C_args:+"${__git_C_args[@]}"} \
+ ${__git_dir:+--git-dir="$__git_dir"} "$@"
+}
+
# The following function is based on code from:
#
# bash_completion - programmable completion functions for bash 3.2+
@@ -287,13 +295,11 @@ __gitcomp_file ()
# argument, and using the options specified in the second argument.
__git_ls_files_helper ()
{
- local dir="$(__gitdir)"
-
if [ "$2" == "--committable" ]; then
- git ${__git_C_args:+"${__git_C_args[@]}"} --git-dir="$dir" -C "$1" diff-index --name-only --relative HEAD
+ __git -C "$1" diff-index --name-only --relative HEAD
else
# NOTE: $2 is not quoted in order to support multiple options
- git ${__git_C_args:+"${__git_C_args[@]}"} --git-dir="$dir" -C "$1" ls-files --exclude-standard $2
+ __git -C "$1" ls-files --exclude-standard $2
fi 2>/dev/null
}
@@ -323,8 +329,7 @@ __git_heads ()
{
local dir="$(__gitdir)"
if [ -d "$dir" ]; then
- git --git-dir="$dir" for-each-ref --format='%(refname:short)' \
- refs/heads
+ __git for-each-ref --format='%(refname:short)' refs/heads
return
fi
}
@@ -333,8 +338,7 @@ __git_tags ()
{
local dir="$(__gitdir)"
if [ -d "$dir" ]; then
- git --git-dir="$dir" for-each-ref --format='%(refname:short)' \
- refs/tags
+ __git for-each-ref --format='%(refname:short)' refs/tags
return
fi
}
@@ -385,14 +389,14 @@ __git_refs ()
refs="refs/tags refs/heads refs/remotes"
;;
esac
- git --git-dir="$dir" for-each-ref --format="$pfx%($format)" \
+ __git_dir="$dir" __git for-each-ref --format="$pfx%($format)" \
$refs
if [ -n "$track" ]; then
# employ the heuristic used by git checkout
# Try to find a remote branch that matches the completion word
# but only output if the branch name is unique
local ref entry
- git --git-dir="$dir" for-each-ref --shell --format="ref=%(refname:short)" \
+ __git for-each-ref --shell --format="ref=%(refname:short)" \
"refs/remotes/" | \
while read -r entry; do
eval "$entry"
@@ -406,7 +410,7 @@ __git_refs ()
fi
case "$cur" in
refs|refs/*)
- git --git-dir="$dir" ls-remote "$remote" "$cur*" 2>/dev/null | \
+ __git ls-remote "$remote" "$cur*" 2>/dev/null | \
while read -r hash i; do
case "$i" in
*^{}) ;;
@@ -417,10 +421,10 @@ __git_refs ()
*)
if [ "$list_refs_from" = remote ]; then
echo "HEAD"
- git --git-dir="$dir" for-each-ref --format="%(refname:short)" \
+ __git for-each-ref --format="%(refname:short)" \
"refs/remotes/$remote/" 2>/dev/null | sed -e "s#^$remote/##"
else
- git --git-dir="$dir" ls-remote "$remote" HEAD \
+ __git ls-remote "$remote" HEAD \
"refs/tags/*" "refs/heads/*" "refs/remotes/*" 2>/dev/null |
while read -r hash i; do
case "$i" in
@@ -447,7 +451,7 @@ __git_refs2 ()
__git_refs_remotes ()
{
local i hash
- git --git-dir="$(__gitdir)" ls-remote "$1" 'refs/heads/*' 2>/dev/null | \
+ __git ls-remote "$1" 'refs/heads/*' 2>/dev/null | \
while read -r hash i; do
echo "$i:refs/remotes/$1/${i#refs/heads/}"
done
@@ -457,7 +461,7 @@ __git_remotes ()
{
local d="$(__gitdir)"
test -d "$d/remotes" && ls -1 "$d/remotes"
- git --git-dir="$d" remote
+ __git remote
}
# Returns true if $1 matches the name of a configured remote, false otherwise.
@@ -523,7 +527,7 @@ __git_complete_revlist_file ()
*) pfx="$ref:$pfx" ;;
esac
- __gitcomp_nl "$(git ${__git_C_args:+"${__git_C_args[@]}"} --git-dir="$(__gitdir)" ls-tree "$ls" 2>/dev/null \
+ __gitcomp_nl "$(__git ls-tree "$ls" 2>/dev/null \
| sed '/^100... blob /{
s,^.* ,,
s,$, ,
@@ -801,7 +805,7 @@ __git_compute_porcelain_commands ()
__git_get_config_variables ()
{
local section="$1" i IFS=$'\n'
- for i in $(git --git-dir="$(__gitdir)" config --name-only --get-regexp "^$section\..*" 2>/dev/null); do
+ for i in $(__git config --name-only --get-regexp "^$section\..*" 2>/dev/null); do
echo "${i#$section.}"
done
}
@@ -819,8 +823,7 @@ __git_aliases ()
# __git_aliased_command requires 1 argument
__git_aliased_command ()
{
- local word cmdline=$(git --git-dir="$(__gitdir)" \
- config --get "alias.$1" 2>/dev/null)
+ local word cmdline=$(__git config --get "alias.$1" 2>/dev/null)
for word in $cmdline; do
case "$word" in
\!gitk|gitk)
@@ -896,7 +899,7 @@ __git_get_option_value ()
done
if [ -n "$config_key" ] && [ -z "$result" ]; then
- result="$(git --git-dir="$(__gitdir)" config "$config_key")"
+ result="$(__git config "$config_key")"
fi
echo "$result"
@@ -1237,7 +1240,7 @@ _git_commit ()
return
esac
- if git --git-dir="$(__gitdir)" rev-parse --verify --quiet HEAD >/dev/null; then
+ if __git rev-parse --verify --quiet HEAD >/dev/null; then
__git_complete_index_file "--committable"
else
# This is the first commit
@@ -1839,7 +1842,7 @@ _git_send_email ()
case "$prev" in
--to|--cc|--bcc|--from)
__gitcomp "
- $(git --git-dir="$(__gitdir)" send-email --dump-aliases 2>/dev/null)
+ $(__git send-email --dump-aliases 2>/dev/null)
"
return
;;
@@ -1871,7 +1874,7 @@ _git_send_email ()
;;
--to=*|--cc=*|--bcc=*|--from=*)
__gitcomp "
- $(git --git-dir="$(__gitdir)" send-email --dump-aliases 2>/dev/null)
+ $(__git send-email --dump-aliases 2>/dev/null)
" "" "${cur#--*=}"
return
;;
@@ -1966,7 +1969,7 @@ __git_config_get_set_variables ()
c=$((--c))
done
- git --git-dir="$(__gitdir)" config $config_file --name-only --list 2>/dev/null
+ __git config $config_file --name-only --list 2>/dev/null
}
_git_config ()
@@ -2001,9 +2004,8 @@ _git_config ()
remote.*.push)
local remote="${prev#remote.}"
remote="${remote%.push}"
- __gitcomp_nl "$(git --git-dir="$(__gitdir)" \
- for-each-ref --format='%(refname):%(refname)' \
- refs/heads)"
+ __gitcomp_nl "$(__git for-each-ref
+ --format='%(refname):%(refname)' refs/heads)"
return
;;
pull.twohead|pull.octopus)
@@ -2591,12 +2593,12 @@ _git_stash ()
if [ $cword -eq 3 ]; then
__gitcomp_nl "$(__git_refs)";
else
- __gitcomp_nl "$(git --git-dir="$(__gitdir)" stash list \
+ __gitcomp_nl "$(__git stash list \
| sed -n -e 's/:.*//p')"
fi
;;
show,*|apply,*|drop,*|pop,*)
- __gitcomp_nl "$(git --git-dir="$(__gitdir)" stash list \
+ __gitcomp_nl "$(__git stash list \
| sed -n -e 's/:.*//p')"
;;
*)
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 13/21] completion: don't offer commands when 'git --opt' needs an argument
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
The main git options '--git-dir', '-c', '-C', '--worktree' and
'--namespace' require an argument, but attempting completion right
after them lists git commands.
Don't offer anything right after these options, thus let Bash fall
back to filename completion, because
- the three options '--git-dir', '-C' and '--worktree' do actually
require a path argument, and
- we don't complete the required argument of '-c' and '--namespace',
and in that case the "standard" behavior of our completion script
is to not offer anything, but fall back to filename completion.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 4ded44977..7d25b33b8 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2808,6 +2808,17 @@ __git_main ()
done
if [ -z "$command" ]; then
+ case "$prev" in
+ --git-dir|-C|--work-tree)
+ # these need a path argument, let's fall back to
+ # Bash filename completion
+ return
+ ;;
+ -c|--namespace)
+ # we don't support completing these options' arguments
+ return
+ ;;
+ esac
case "$cur" in
--*) __gitcomp "
--paginate
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 20/21] completion: extract repository discovery from __gitdir()
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
To prepare for caching the path to the repository in the following
commit, extract the repository discovering part of __gitdir() into the
__git_find_repo_path() helper function, which stores the found path in
the $__git_repo_path variable instead of printing it. Make __gitdir()
a wrapper around this new function. Declare $__git_repo_path local in
the toplevel completion functions __git_main() and __gitk_main() to
ensure that it never leaks into the environment and influences
subsequent completions (though this isn't necessary right now, as
__gitdir() is still only executed in subshells, but will matter for
the following commit).
Adjust tests checking __gitdir() or any other completion function
calling __gitdir() to perform those checks in a subshell to prevent
$__git_repo_path from leaking into the test environment. Otherwise
leave the tests unchanged to demonstrate that this change doesn't
alter __gitdir()'s behavior.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 42 +++++++++++++++++++++-------------
t/t9902-completion.sh | 22 +++++++++++++-----
2 files changed, 42 insertions(+), 22 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 1c7493ff2..7775411cd 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -34,26 +34,35 @@ case "$COMP_WORDBREAKS" in
*) COMP_WORDBREAKS="$COMP_WORDBREAKS:"
esac
+# Discovers the path to the git repository taking any '--git-dir=<path>' and
+# '-C <path>' options into account and stores it in the $__git_repo_path
+# variable.
+__git_find_repo_path ()
+{
+ if [ -n "${__git_C_args-}" ]; then
+ __git_repo_path="$(git "${__git_C_args[@]}" \
+ ${__git_dir:+--git-dir="$__git_dir"} \
+ rev-parse --absolute-git-dir 2>/dev/null)"
+ elif [ -n "${__git_dir-}" ]; then
+ test -d "$__git_dir" &&
+ __git_repo_path="$__git_dir"
+ elif [ -n "${GIT_DIR-}" ]; then
+ test -d "${GIT_DIR-}" &&
+ __git_repo_path="$GIT_DIR"
+ elif [ -d .git ]; then
+ __git_repo_path=.git
+ else
+ __git_repo_path="$(git rev-parse --git-dir 2>/dev/null)"
+ fi
+}
+
# __gitdir accepts 0 or 1 arguments (i.e., location)
# returns location of .git repo
__gitdir ()
{
if [ -z "${1-}" ]; then
- if [ -n "${__git_C_args-}" ]; then
- git "${__git_C_args[@]}" \
- ${__git_dir:+--git-dir="$__git_dir"} \
- rev-parse --absolute-git-dir 2>/dev/null
- elif [ -n "${__git_dir-}" ]; then
- test -d "$__git_dir" || return 1
- echo "$__git_dir"
- elif [ -n "${GIT_DIR-}" ]; then
- test -d "${GIT_DIR-}" || return 1
- echo "$GIT_DIR"
- elif [ -d .git ]; then
- echo .git
- else
- git rev-parse --git-dir 2>/dev/null
- fi
+ __git_find_repo_path || return 1
+ echo "$__git_repo_path"
elif [ -d "$1/.git" ]; then
echo "$1/.git"
else
@@ -2783,7 +2792,7 @@ _git_worktree ()
__git_main ()
{
- local i c=1 command __git_dir
+ local i c=1 command __git_dir __git_repo_path
local __git_C_args C_args_count=0
while [ $c -lt $cword ]; do
@@ -2855,6 +2864,7 @@ __gitk_main ()
{
__git_has_doubledash && return
+ local __git_repo_path
local g="$(__gitdir)"
local merge=""
if [ -f "$g/MERGE_HEAD" ]; then
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 984df05b2..1816ed2e0 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -147,19 +147,25 @@ test_expect_success '__gitdir - from command line (through $__git_dir)' '
test_expect_success '__gitdir - repo as argument' '
echo "otherrepo/.git" >expected &&
- __gitdir "otherrepo" >"$actual" &&
+ (
+ __gitdir "otherrepo" >"$actual"
+ ) &&
test_cmp expected "$actual"
'
test_expect_success '__gitdir - remote as argument' '
echo "remote" >expected &&
- __gitdir "remote" >"$actual" &&
+ (
+ __gitdir "remote" >"$actual"
+ ) &&
test_cmp expected "$actual"
'
test_expect_success '__gitdir - .git directory in cwd' '
echo ".git" >expected &&
- __gitdir >"$actual" &&
+ (
+ __gitdir >"$actual"
+ ) &&
test_cmp expected "$actual"
'
@@ -450,7 +456,9 @@ test_expect_success '__git_remotes - list remotes from $GIT_DIR/remotes and from
git remote add remote_in_config_1 git://remote_1 &&
test_when_finished "git remote remove remote_in_config_2" &&
git remote add remote_in_config_2 git://remote_2 &&
- __git_remotes >actual &&
+ (
+ __git_remotes >actual
+ ) &&
test_cmp expect actual
'
@@ -459,8 +467,10 @@ test_expect_success '__git_is_configured_remote' '
git remote add remote_1 git://remote_1 &&
test_when_finished "git remote remove remote_2" &&
git remote add remote_2 git://remote_2 &&
- verbose __git_is_configured_remote remote_2 &&
- test_must_fail __git_is_configured_remote non-existent
+ (
+ verbose __git_is_configured_remote remote_2 &&
+ test_must_fail __git_is_configured_remote non-existent
+ )
'
test_expect_success 'setup for ref completion' '
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
* [PATCHv2 21/21] completion: cache the path to the repository
From: SZEDER Gábor @ 2017-02-03 2:48 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git, SZEDER Gábor
In-Reply-To: <20170203024829.8071-1-szeder.dev@gmail.com>
After the previous changes in this series there are only a handful of
$(__gitdir) command substitutions left in the completion script, but
there is still a bit of room for improvements:
1. The command substitution involves the forking of a subshell,
which has considerable overhead on some platforms.
2. There are a few cases, where this command substitution is
executed more than once during a single completion, which means
multiple subshells and possibly multiple 'git rev-parse'
executions. __gitdir() is invoked twice while completing refs
for e.g. 'git log', 'git rebase', 'gitk', or while completing
remote refs for 'git fetch' or 'git push'.
Both of these points can be addressed by using the
__git_find_repo_path() helper function introduced in the previous
commit:
1. __git_find_repo_path() stores the path to the repository in a
variable instead of printing it, so the command substitution
around the function can be avoided. Or rather: the command
substitution should be avoided to make the new value of the
variable set inside the function visible to the callers.
(Yes, there is now a command substitution inside
__git_find_repo_path() around each 'git rev-parse', but that's
executed only if necessary, and only once per completion, see
point 2. below.)
2. $__git_repo_path, the variable holding the path to the
repository, is declared local in the toplevel completion
functions __git_main() and __gitk_main(). Thus, once set, the
path is visible in all completion functions, including all
subsequent calls to __git_find_repo_path(), meaning that they
wouldn't have to re-discover the path to the repository.
So call __git_find_repo_path() and use $__git_repo_path instead of the
$(__gitdir) command substitution to access paths in the .git
directory. Turn tests checking __gitdir()'s repository discovery into
tests of __git_find_repo_path() such that only the tested function
changes but the expected results don't, ensuring that repo discovery
keeps working as it did before.
As __gitdir() is not used anymore in the completion script, mark it as
deprecated and direct users' attention to __git_find_repo_path() and
$__git_repo_path. Yet keep four __gitdir() tests to ensure that it
handles success and failure of __git_find_repo_path() and that it
still handles its optional remote argument, because users' custom
completion scriptlets might depend on it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
---
contrib/completion/git-completion.bash | 46 ++++++----
t/t9902-completion.sh | 161 +++++++++++++++++++++------------
2 files changed, 132 insertions(+), 75 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 7775411cd..ed06cb621 100644
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -39,6 +39,11 @@ esac
# variable.
__git_find_repo_path ()
{
+ if [ -n "$__git_repo_path" ]; then
+ # we already know where it is
+ return
+ fi
+
if [ -n "${__git_C_args-}" ]; then
__git_repo_path="$(git "${__git_C_args[@]}" \
${__git_dir:+--git-dir="$__git_dir"} \
@@ -56,6 +61,7 @@ __git_find_repo_path ()
fi
}
+# Deprecated: use __git_find_repo_path() and $__git_repo_path instead
# __gitdir accepts 0 or 1 arguments (i.e., location)
# returns location of .git repo
__gitdir ()
@@ -350,10 +356,13 @@ __git_tags ()
# 'git checkout's tracking DWIMery (optional; ignored, if set but empty).
__git_refs ()
{
- local i hash dir="$(__gitdir)" track="${2-}"
+ local i hash dir track="${2-}"
local list_refs_from=path remote="${1-}"
local format refs pfx
+ __git_find_repo_path
+ dir="$__git_repo_path"
+
if [ -z "$remote" ]; then
if [ -z "$dir" ]; then
return
@@ -458,8 +467,8 @@ __git_refs_remotes ()
__git_remotes ()
{
- local d="$(__gitdir)"
- test -d "$d/remotes" && ls -1 "$d/remotes"
+ __git_find_repo_path
+ test -d "$__git_repo_path/remotes" && ls -1 "$__git_repo_path/remotes"
__git remote
}
@@ -957,8 +966,8 @@ __git_whitespacelist="nowarn warn error error-all fix"
_git_am ()
{
- local dir="$(__gitdir)"
- if [ -d "$dir"/rebase-apply ]; then
+ __git_find_repo_path
+ if [ -d "$__git_repo_path"/rebase-apply ]; then
__gitcomp "--skip --continue --resolved --abort"
return
fi
@@ -1041,7 +1050,8 @@ _git_bisect ()
local subcommands="start bad good skip reset visualize replay log run"
local subcommand="$(__git_find_on_cmdline "$subcommands")"
if [ -z "$subcommand" ]; then
- if [ -f "$(__gitdir)"/BISECT_START ]; then
+ __git_find_repo_path
+ if [ -f "$__git_repo_path"/BISECT_START ]; then
__gitcomp "$subcommands"
else
__gitcomp "replay start"
@@ -1146,8 +1156,8 @@ _git_cherry ()
_git_cherry_pick ()
{
- local dir="$(__gitdir)"
- if [ -f "$dir"/CHERRY_PICK_HEAD ]; then
+ __git_find_repo_path
+ if [ -f "$__git_repo_path"/CHERRY_PICK_HEAD ]; then
__gitcomp "--continue --quit --abort"
return
fi
@@ -1538,10 +1548,10 @@ __git_log_date_formats="relative iso8601 rfc2822 short local default raw"
_git_log ()
{
__git_has_doubledash && return
+ __git_find_repo_path
- local g="$(__gitdir)"
local merge=""
- if [ -f "$g/MERGE_HEAD" ]; then
+ if [ -f "$__git_repo_path/MERGE_HEAD" ]; then
merge="--merge"
fi
case "$cur" in
@@ -1788,11 +1798,12 @@ _git_push ()
_git_rebase ()
{
- local dir="$(__gitdir)"
- if [ -f "$dir"/rebase-merge/interactive ]; then
+ __git_find_repo_path
+ if [ -f "$__git_repo_path"/rebase-merge/interactive ]; then
__gitcomp "--continue --skip --abort --quit --edit-todo"
return
- elif [ -d "$dir"/rebase-apply ] || [ -d "$dir"/rebase-merge ]; then
+ elif [ -d "$__git_repo_path"/rebase-apply ] || \
+ [ -d "$__git_repo_path"/rebase-merge ]; then
__gitcomp "--continue --skip --abort --quit"
return
fi
@@ -2467,8 +2478,8 @@ _git_reset ()
_git_revert ()
{
- local dir="$(__gitdir)"
- if [ -f "$dir"/REVERT_HEAD ]; then
+ __git_find_repo_path
+ if [ -f "$__git_repo_path"/REVERT_HEAD ]; then
__gitcomp "--continue --quit --abort"
return
fi
@@ -2865,9 +2876,10 @@ __gitk_main ()
__git_has_doubledash && return
local __git_repo_path
- local g="$(__gitdir)"
+ __git_find_repo_path
+
local merge=""
- if [ -f "$g/MERGE_HEAD" ]; then
+ if [ -f "$__git_repo_path/MERGE_HEAD" ]; then
merge="--merge"
fi
case "$cur" in
diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh
index 1816ed2e0..d711bef24 100755
--- a/t/t9902-completion.sh
+++ b/t/t9902-completion.sh
@@ -131,213 +131,217 @@ else
ROOT="$(pwd)"
fi
-test_expect_success 'setup for __gitdir tests' '
+test_expect_success 'setup for __git_find_repo_path/__gitdir tests' '
mkdir -p subdir/subsubdir &&
+ mkdir -p non-repo &&
git init otherrepo
'
-test_expect_success '__gitdir - from command line (through $__git_dir)' '
+test_expect_success '__git_find_repo_path - from command line (through $__git_dir)' '
echo "$ROOT/otherrepo/.git" >expected &&
(
__git_dir="$ROOT/otherrepo/.git" &&
- __gitdir >"$actual"
- ) &&
- test_cmp expected "$actual"
-'
-
-test_expect_success '__gitdir - repo as argument' '
- echo "otherrepo/.git" >expected &&
- (
- __gitdir "otherrepo" >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - remote as argument' '
- echo "remote" >expected &&
- (
- __gitdir "remote" >"$actual"
- ) &&
- test_cmp expected "$actual"
-'
-
-test_expect_success '__gitdir - .git directory in cwd' '
+test_expect_success '__git_find_repo_path - .git directory in cwd' '
echo ".git" >expected &&
(
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - .git directory in parent' '
+test_expect_success '__git_find_repo_path - .git directory in parent' '
echo "$ROOT/.git" >expected &&
(
cd subdir/subsubdir &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - cwd is a .git directory' '
+test_expect_success '__git_find_repo_path - cwd is a .git directory' '
echo "." >expected &&
(
cd .git &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - parent is a .git directory' '
+test_expect_success '__git_find_repo_path - parent is a .git directory' '
echo "$ROOT/.git" >expected &&
(
cd .git/refs/heads &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - $GIT_DIR set while .git directory in cwd' '
+test_expect_success '__git_find_repo_path - $GIT_DIR set while .git directory in cwd' '
echo "$ROOT/otherrepo/.git" >expected &&
(
GIT_DIR="$ROOT/otherrepo/.git" &&
export GIT_DIR &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - $GIT_DIR set while .git directory in parent' '
+test_expect_success '__git_find_repo_path - $GIT_DIR set while .git directory in parent' '
echo "$ROOT/otherrepo/.git" >expected &&
(
GIT_DIR="$ROOT/otherrepo/.git" &&
export GIT_DIR &&
cd subdir &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - from command line while "git -C"' '
+test_expect_success '__git_find_repo_path - from command line while "git -C"' '
echo "$ROOT/.git" >expected &&
(
__git_dir="$ROOT/.git" &&
__git_C_args=(-C otherrepo) &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - relative dir from command line and "git -C"' '
+test_expect_success '__git_find_repo_path - relative dir from command line and "git -C"' '
echo "$ROOT/otherrepo/.git" >expected &&
(
cd subdir &&
__git_dir="otherrepo/.git" &&
__git_C_args=(-C ..) &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - $GIT_DIR set while "git -C"' '
+test_expect_success '__git_find_repo_path - $GIT_DIR set while "git -C"' '
echo "$ROOT/.git" >expected &&
(
GIT_DIR="$ROOT/.git" &&
export GIT_DIR &&
__git_C_args=(-C otherrepo) &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - relative dir in $GIT_DIR and "git -C"' '
+test_expect_success '__git_find_repo_path - relative dir in $GIT_DIR and "git -C"' '
echo "$ROOT/otherrepo/.git" >expected &&
(
cd subdir &&
GIT_DIR="otherrepo/.git" &&
export GIT_DIR &&
__git_C_args=(-C ..) &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - "git -C" while .git directory in cwd' '
+test_expect_success '__git_find_repo_path - "git -C" while .git directory in cwd' '
echo "$ROOT/otherrepo/.git" >expected &&
(
__git_C_args=(-C otherrepo) &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - "git -C" while cwd is a .git directory' '
+test_expect_success '__git_find_repo_path - "git -C" while cwd is a .git directory' '
echo "$ROOT/otherrepo/.git" >expected &&
(
cd .git &&
__git_C_args=(-C .. -C otherrepo) &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - "git -C" while .git directory in parent' '
+test_expect_success '__git_find_repo_path - "git -C" while .git directory in parent' '
echo "$ROOT/otherrepo/.git" >expected &&
(
cd subdir &&
__git_C_args=(-C .. -C otherrepo) &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - non-existing path in "git -C"' '
+test_expect_success '__git_find_repo_path - non-existing path in "git -C"' '
(
__git_C_args=(-C non-existing) &&
- test_must_fail __gitdir >"$actual"
+ test_must_fail __git_find_repo_path &&
+ printf "$__git_repo_path" >"$actual"
) &&
test_must_be_empty "$actual"
'
-test_expect_success '__gitdir - non-existing path in $__git_dir' '
+test_expect_success '__git_find_repo_path - non-existing path in $__git_dir' '
(
__git_dir="non-existing" &&
- test_must_fail __gitdir >"$actual"
+ test_must_fail __git_find_repo_path &&
+ printf "$__git_repo_path" >"$actual"
) &&
test_must_be_empty "$actual"
'
-test_expect_success '__gitdir - non-existing $GIT_DIR' '
+test_expect_success '__git_find_repo_path - non-existing $GIT_DIR' '
(
GIT_DIR="$ROOT/non-existing" &&
export GIT_DIR &&
- test_must_fail __gitdir >"$actual"
+ test_must_fail __git_find_repo_path &&
+ printf "$__git_repo_path" >"$actual"
) &&
test_must_be_empty "$actual"
'
-test_expect_success '__gitdir - gitfile in cwd' '
+test_expect_success '__git_find_repo_path - gitfile in cwd' '
echo "$ROOT/otherrepo/.git" >expected &&
echo "gitdir: $ROOT/otherrepo/.git" >subdir/.git &&
test_when_finished "rm -f subdir/.git" &&
(
cd subdir &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - gitfile in parent' '
+test_expect_success '__git_find_repo_path - gitfile in parent' '
echo "$ROOT/otherrepo/.git" >expected &&
echo "gitdir: $ROOT/otherrepo/.git" >subdir/.git &&
test_when_finished "rm -f subdir/.git" &&
(
cd subdir/subsubdir &&
- __gitdir >"$actual"
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success SYMLINKS '__gitdir - resulting path avoids symlinks' '
+test_expect_success SYMLINKS '__git_find_repo_path - resulting path avoids symlinks' '
echo "$ROOT/otherrepo/.git" >expected &&
mkdir otherrepo/dir &&
test_when_finished "rm -rf otherrepo/dir" &&
@@ -345,16 +349,57 @@ test_expect_success SYMLINKS '__gitdir - resulting path avoids symlinks' '
test_when_finished "rm -f link" &&
(
cd link &&
+ __git_find_repo_path &&
+ echo "$__git_repo_path" >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success '__git_find_repo_path - not a git repository' '
+ (
+ cd non-repo &&
+ GIT_CEILING_DIRECTORIES="$ROOT" &&
+ export GIT_CEILING_DIRECTORIES &&
+ test_must_fail __git_find_repo_path &&
+ printf "$__git_repo_path" >"$actual"
+ ) &&
+ test_must_be_empty "$actual"
+'
+
+test_expect_success '__gitdir - finds repo' '
+ echo "$ROOT/.git" >expected &&
+ (
+ cd subdir/subsubdir &&
__gitdir >"$actual"
) &&
test_cmp expected "$actual"
'
-test_expect_success '__gitdir - not a git repository' '
- nongit test_must_fail __gitdir >"$actual" &&
+
+test_expect_success '__gitdir - returns error when cant find repo' '
+ (
+ __git_dir="non-existing" &&
+ test_must_fail __gitdir >"$actual"
+ ) &&
test_must_be_empty "$actual"
'
+test_expect_success '__gitdir - repo as argument' '
+ echo "otherrepo/.git" >expected &&
+ (
+ __gitdir "otherrepo" >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
+test_expect_success '__gitdir - remote as argument' '
+ echo "remote" >expected &&
+ (
+ __gitdir "remote" >"$actual"
+ ) &&
+ test_cmp expected "$actual"
+'
+
test_expect_success '__gitcomp - trailing space - options' '
test_gitcomp "--re" "--dry-run --reuse-message= --reedit-message=
--reset-author" <<-EOF
--
2.11.0.555.g967c1bcb3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox