git.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/2] git-submodule: make it easier to use alternate urls
@ 2007-06-05  9:29 Lars Hjemli
       [not found] ` <863f2ca67857bc2d09f46f1a5ef6f653d16d5256.1181034736.git.hjemli@gmail.com>
  0 siblings, 1 reply; 11+ messages in thread
From: Lars Hjemli @ 2007-06-05  9:29 UTC (permalink / raw)
  To: Junio C Hamano; +Cc: git


This patch-series teaches git-submodule to register submodule urls in
.git/config during 'git-submodule init' and to perform the actual cloning
during 'git-submodule update', using the url stored in .git/config. So now
the downstream users can specify their preferred urls for each interesting
submodule by editing their .git/config after running 'git-submodule init'.

 Documentation/git-submodule.txt |   16 ++++----
 git-submodule.sh                |   83 ++++++++++++++++++++------------------
 t/t7400-submodule-basic.sh      |   38 ++++++++++++------
 3 files changed, 78 insertions(+), 59 deletions(-)

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 1/2] git-submodule: move cloning into a separate function
       [not found] ` <863f2ca67857bc2d09f46f1a5ef6f653d16d5256.1181034736.git.hjemli@gmail.com>
@ 2007-06-05  9:29   ` Lars Hjemli
  2007-06-05 10:40     ` Johannes Sixt
  2007-06-06  9:13   ` Lars Hjemli
       [not found]   ` <c14730acf8a52a57250303c033ebec09bf960007.1181034736.git.hjemli@gmail.com>
  2 siblings, 1 reply; 11+ messages in thread
From: Lars Hjemli @ 2007-06-05  9:29 UTC (permalink / raw)
  To: Junio C Hamano; +Cc: git

This is just a simple refactoring of modules_init() with no change in
functionality.

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
---
 git-submodule.sh |   44 ++++++++++++++++++++++++++++----------------
 1 files changed, 28 insertions(+), 16 deletions(-)

diff --git a/git-submodule.sh b/git-submodule.sh
index 6ed5a6c..a89ea88 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -25,6 +25,33 @@ say()
 	fi
 }
 
+
+#
+# Clone a submodule
+#
+module_clone()
+{
+	path=$1
+	url=$2
+
+	# If there already is a directory at the submodule path,
+	# expect it to be empty (since that is the default checkout
+	# action) and try to remove it.
+	# Note: if $path is a symlink to a directory the test will
+	# succeed but the rmdir will fail. We might want to fix this.
+	if test -d "$path"
+	then
+		rmdir "$path" 2>/dev/null ||
+		die "Directory '$path' exist, but is neither empty nor a git repository"
+	fi
+
+	test -e "$path" &&
+	die "A file already exist at path '$path'"
+
+	git-clone -n "$url" "$path" ||
+	die "Clone of submodule '$path' failed"
+}
+
 #
 # Run clone + checkout on missing submodules
 #
@@ -40,20 +67,6 @@ modules_init()
 		# repository
 		test -d "$path"/.git && continue
 
-		# If there already is a directory at the submodule path,
-		# expect it to be empty (since that is the default checkout
-		# action) and try to remove it.
-		# Note: if $path is a symlink to a directory the test will
-		# succeed but the rmdir will fail. We might want to fix this.
-		if test -d "$path"
-		then
-			rmdir "$path" 2>/dev/null ||
-			die "Directory '$path' exist, but is neither empty nor a git repository"
-		fi
-
-		test -e "$path" &&
-		die "A file already exist at path '$path'"
-
 		url=$(GIT_CONFIG=.gitmodules git-config module."$path".url)
 		test -z "$url" &&
 		die "No url found for submodule '$path' in .gitmodules"
@@ -69,8 +82,7 @@ modules_init()
 		# logical modulename (if present) as key. But this would need
 		# another fallback mechanism if the module wasn't named.
 
-		git-clone -n "$url" "$path" ||
-		die "Clone of submodule '$path' failed"
+		module_clone "$path" "$url" || exit $?
 
 		(unset GIT_DIR && cd "$path" && git-checkout -q "$sha1") ||
 		die "Checkout of submodule '$path' failed"
-- 
1.5.2.841.gc9eafb

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH 2/2] git-submodule: clone during update, not during init
       [not found]   ` <c14730acf8a52a57250303c033ebec09bf960007.1181034736.git.hjemli@gmail.com>
@ 2007-06-05  9:29     ` Lars Hjemli
  2007-06-05 11:18       ` Lars Hjemli
  2007-06-06  9:13     ` Lars Hjemli
  1 sibling, 1 reply; 11+ messages in thread
From: Lars Hjemli @ 2007-06-05  9:29 UTC (permalink / raw)
  To: Junio C Hamano; +Cc: git

This teaches 'git-submodule init' to register submodule paths and urls in
.git/config instead of actually cloning them. The cloning is now handled
as part of 'git-submodule update'.

With this change it is possible to specify preferred/alternate urls for
the submodules in .git/config before the submodules are cloned.

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
---
 Documentation/git-submodule.txt |   16 +++++++-------
 git-submodule.sh                |   41 ++++++++++++++++----------------------
 t/t7400-submodule-basic.sh      |   38 ++++++++++++++++++++++++-----------
 3 files changed, 51 insertions(+), 44 deletions(-)

diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt
index cb0424f..f8fb80f 100644
--- a/Documentation/git-submodule.txt
+++ b/Documentation/git-submodule.txt
@@ -23,15 +23,15 @@ status::
 	repository. This command is the default command for git-submodule.
 
 init::
-	Initialize the submodules, i.e. clone the git repositories specified
-	in the .gitmodules file and checkout the submodule commits specified
-	in the index of the containing repository. This will make the
-	submodules HEAD be detached.
+	Initialize the submodules, i.e. register in .git/config each submodule
+	path and url found in .gitmodules. The key used in git/config is
+	`submodule.$path.url`. This command does not alter existing information
+	in .git/config.
 
 update::
-	Update the initialized submodules, i.e. checkout the submodule commits
-	specified in the index of the containing repository. This will make
-	the submodules HEAD be detached.
+	Update the registered submodules, i.e. clone missing submodules and
+	checkout the commit specified in the index of the containing repository.
+	This will make the submodules HEAD be detached.
 
 
 OPTIONS
@@ -50,7 +50,7 @@ OPTIONS
 
 FILES
 -----
-When cloning submodules, a .gitmodules file in the top-level directory
+When initializing submodules, a .gitmodules file in the top-level directory
 of the containing repository is used to find the url of each submodule.
 This file should be formatted in the same way as $GIR_DIR/config. The key
 to each submodule url is "module.$path.url".
diff --git a/git-submodule.sh b/git-submodule.sh
index a89ea88..e7b6978 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -53,7 +53,7 @@ module_clone()
 }
 
 #
-# Run clone + checkout on missing submodules
+# Register submodules in .git/config
 #
 # $@ = requested paths (default to all)
 #
@@ -62,37 +62,23 @@ modules_init()
 	git ls-files --stage -- "$@" | grep -e '^160000 ' |
 	while read mode sha1 stage path
 	do
-		# Skip submodule paths that already contain a .git directory.
-		# This will also trigger if $path is a symlink to a git
-		# repository
-		test -d "$path"/.git && continue
+		# Skip already registered paths
+		url=$(git-config submodule."$path".url)
+		test -z "$url" || continue
 
 		url=$(GIT_CONFIG=.gitmodules git-config module."$path".url)
 		test -z "$url" &&
 		die "No url found for submodule '$path' in .gitmodules"
 
-		# MAYBE FIXME: this would be the place to check GIT_CONFIG
-		# for a preferred url for this submodule, possibly like this:
-		#
-		# modname=$(GIT_CONFIG=.gitmodules git-config module."$path".name)
-		# alturl=$(git-config module."$modname".url)
-		#
-		# This would let the versioned .gitmodules file use the submodule
-		# path as key, while the unversioned GIT_CONFIG would use the
-		# logical modulename (if present) as key. But this would need
-		# another fallback mechanism if the module wasn't named.
+		git-config submodule."$path".url "$url" ||
+		die "Failed to register url for submodule '$path'"
 
-		module_clone "$path" "$url" || exit $?
-
-		(unset GIT_DIR && cd "$path" && git-checkout -q "$sha1") ||
-		die "Checkout of submodule '$path' failed"
-
-		say "Submodule '$path' initialized"
+		say "Submodule '$path' registered with url '$url'"
 	done
 }
 
 #
-# Checkout correct revision of each initialized submodule
+# Update each submodule path to correct revision, using clone and checkout as needed
 #
 # $@ = requested paths (default to all)
 #
@@ -101,14 +87,21 @@ modules_update()
 	git ls-files --stage -- "$@" | grep -e '^160000 ' |
 	while read mode sha1 stage path
 	do
-		if ! test -d "$path"/.git
+		url=$(git-config submodule."$path".url)
+		if test -z "$url"
 		then
 			# Only mention uninitialized submodules when its
 			# path have been specified
 			test "$#" != "0" &&
 			say "Submodule '$path' not initialized"
-			continue;
+			continue
 		fi
+
+		if ! test -d "$path"/.git
+		then
+			module_clone "$path" "$url" || exit $?
+		fi
+
 		subsha1=$(unset GIT_DIR && cd "$path" &&
 			git-rev-parse --verify HEAD) ||
 		die "Unable to find current revision of submodule '$path'"
diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh
index 6274729..3940433 100755
--- a/t/t7400-submodule-basic.sh
+++ b/t/t7400-submodule-basic.sh
@@ -40,7 +40,7 @@ test_expect_success 'Prepare submodule testing' '
 	git-add a lib z &&
 	git-commit -m "super commit 1" &&
 	mv lib .subrepo &&
-	GIT_CONFIG=.gitmodules git-config module.lib.url ./.subrepo
+	GIT_CONFIG=.gitmodules git-config module.lib.url git://example.com/lib.git
 '
 
 test_expect_success 'status should only print one line' '
@@ -52,41 +52,55 @@ test_expect_success 'status should initially be "missing"' '
 	git-submodule status | grep "^-$rev1"
 '
 
-test_expect_success 'init should fail when path is used by a file' '
+test_expect_success 'init should register submodule url in .git/config' '
+	git-submodule init &&
+	url=$(git-config submodule.lib.url) &&
+	if test "$url" != "git://example.com/lib.git"
+	then
+		echo "[OOPS] init succeeded but submodule url is wrong"
+		false
+	elif ! git-config submodule.lib.url ./.subrepo
+	then
+		echo "[OOPS] init succeeded but update of url failed"
+		false
+	fi
+'
+
+test_expect_success 'update should fail when path is used by a file' '
 	echo "hello" >lib &&
-	if git-submodule init
+	if git-submodule update
 	then
-		echo "[OOPS] init should have failed"
+		echo "[OOPS] update should have failed"
 		false
 	elif test -f lib && test "$(cat lib)" != "hello"
 	then
-		echo "[OOPS] init failed but lib file was molested"
+		echo "[OOPS] update failed but lib file was molested"
 		false
 	else
 		rm lib
 	fi
 '
 
-test_expect_success 'init should fail when path is used by a nonempty directory' '
+test_expect_success 'update should fail when path is used by a nonempty directory' '
 	mkdir lib &&
 	echo "hello" >lib/a &&
-	if git-submodule init
+	if git-submodule update
 	then
-		echo "[OOPS] init should have failed"
+		echo "[OOPS] update should have failed"
 		false
 	elif test "$(cat lib/a)" != "hello"
 	then
-		echo "[OOPS] init failed but lib/a was molested"
+		echo "[OOPS] update failed but lib/a was molested"
 		false
 	else
 		rm lib/a
 	fi
 '
 
-test_expect_success 'init should work when path is an empty dir' '
+test_expect_success 'update should work when path is an empty dir' '
 	rm -rf lib &&
 	mkdir lib &&
-	git-submodule init &&
+	git-submodule update &&
 	head=$(cd lib && git-rev-parse HEAD) &&
 	if test -z "$head"
 	then
@@ -99,7 +113,7 @@ test_expect_success 'init should work when path is an empty dir' '
 	fi
 '
 
-test_expect_success 'status should be "up-to-date" after init' '
+test_expect_success 'status should be "up-to-date" after update' '
 	git-submodule status | grep "^ $rev1"
 '
 
-- 
1.5.2.841.gc9eafb

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] git-submodule: move cloning into a separate function
  2007-06-05  9:29   ` [PATCH 1/2] git-submodule: move cloning into a separate function Lars Hjemli
@ 2007-06-05 10:40     ` Johannes Sixt
  2007-06-05 11:13       ` Lars Hjemli
  0 siblings, 1 reply; 11+ messages in thread
From: Johannes Sixt @ 2007-06-05 10:40 UTC (permalink / raw)
  To: git

Lars Hjemli wrote:
> +               module_clone "$path" "$url" || exit $?

Minor nit: The idiom that is commonly used in situations like this (see
other git-* shell scripts):

		module_clone "$path" "$url" || exit

because exit without argument uses the code of the last command
executed.

-- Hannes

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 1/2] git-submodule: move cloning into a separate function
  2007-06-05 10:40     ` Johannes Sixt
@ 2007-06-05 11:13       ` Lars Hjemli
  2007-06-06  8:55         ` Junio C Hamano
  2007-06-17 14:38         ` Sven Verdoolaege
  0 siblings, 2 replies; 11+ messages in thread
From: Lars Hjemli @ 2007-06-05 11:13 UTC (permalink / raw)
  To: Johannes Sixt; +Cc: git@vger.kernel.org

This is just a simple refactoring of modules_init() with no change in
functionality.

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
---

On Tue, 05 Jun 2007 12:40:50 +0200, Johannes Sixt <J.Sixt@eudaptics.com> wrote:

> Lars Hjemli wrote:
>> +               module_clone "$path" "$url" || exit $?
>
> Minor nit: The idiom that is commonly used in situations like this (see
> other git-* shell scripts):
>
> 		module_clone "$path" "$url" || exit
>
> because exit without argument uses the code of the last command
> executed.
>

Thanks, I'll follow up with matching changes to [patch 2/2].


  git-submodule.sh |   44 ++++++++++++++++++++++++++++----------------
  1 files changed, 28 insertions(+), 16 deletions(-)

diff --git a/git-submodule.sh b/git-submodule.sh
index 6ed5a6c..a89ea88 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -25,6 +25,33 @@ say()
  	fi
  }

+
+#
+# Clone a submodule
+#
+module_clone()
+{
+	path=$1
+	url=$2
+
+	# If there already is a directory at the submodule path,
+	# expect it to be empty (since that is the default checkout
+	# action) and try to remove it.
+	# Note: if $path is a symlink to a directory the test will
+	# succeed but the rmdir will fail. We might want to fix this.
+	if test -d "$path"
+	then
+		rmdir "$path" 2>/dev/null ||
+		die "Directory '$path' exist, but is neither empty nor a git repository"
+	fi
+
+	test -e "$path" &&
+	die "A file already exist at path '$path'"
+
+	git-clone -n "$url" "$path" ||
+	die "Clone of submodule '$path' failed"
+}
+
  #
  # Run clone + checkout on missing submodules
  #
@@ -40,20 +67,6 @@ modules_init()
  		# repository
  		test -d "$path"/.git && continue

-		# If there already is a directory at the submodule path,
-		# expect it to be empty (since that is the default checkout
-		# action) and try to remove it.
-		# Note: if $path is a symlink to a directory the test will
-		# succeed but the rmdir will fail. We might want to fix this.
-		if test -d "$path"
-		then
-			rmdir "$path" 2>/dev/null ||
-			die "Directory '$path' exist, but is neither empty nor a git repository"
-		fi
-
-		test -e "$path" &&
-		die "A file already exist at path '$path'"
-
  		url=$(GIT_CONFIG=.gitmodules git-config module."$path".url)
  		test -z "$url" &&
  		die "No url found for submodule '$path' in .gitmodules"
@@ -69,8 +82,7 @@ modules_init()
  		# logical modulename (if present) as key. But this would need
  		# another fallback mechanism if the module wasn't named.

-		git-clone -n "$url" "$path" ||
-		die "Clone of submodule '$path' failed"
+		module_clone "$path" "$url" || exit

  		(unset GIT_DIR && cd "$path" && git-checkout -q "$sha1") ||
  		die "Checkout of submodule '$path' failed"
-- 
1.5.2.841.gc9eafb

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH 2/2] git-submodule: clone during update, not during init
  2007-06-05  9:29     ` [PATCH 2/2] git-submodule: clone during update, not during init Lars Hjemli
@ 2007-06-05 11:18       ` Lars Hjemli
  0 siblings, 0 replies; 11+ messages in thread
From: Lars Hjemli @ 2007-06-05 11:18 UTC (permalink / raw)
  To: Johannes Sixt; +Cc: git

This teaches 'git-submodule init' to register submodule paths and urls in
.git/config instead of actually cloning them. The cloning is now handled
as part of 'git-submodule update'.

With this change it is possible to specify preferred/alternate urls for
the submodules in .git/config before the submodules are cloned.

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
---

Changed from '|| exit @?' to '|| exit'.


  Documentation/git-submodule.txt |   16 +++++++-------
  git-submodule.sh                |   41 ++++++++++++++++----------------------
  t/t7400-submodule-basic.sh      |   38 ++++++++++++++++++++++++-----------
  3 files changed, 51 insertions(+), 44 deletions(-)

diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt
index cb0424f..f8fb80f 100644
--- a/Documentation/git-submodule.txt
+++ b/Documentation/git-submodule.txt
@@ -23,15 +23,15 @@ status::
  	repository. This command is the default command for git-submodule.

  init::
-	Initialize the submodules, i.e. clone the git repositories specified
-	in the .gitmodules file and checkout the submodule commits specified
-	in the index of the containing repository. This will make the
-	submodules HEAD be detached.
+	Initialize the submodules, i.e. register in .git/config each submodule
+	path and url found in .gitmodules. The key used in git/config is
+	`submodule.$path.url`. This command does not alter existing information
+	in .git/config.

  update::
-	Update the initialized submodules, i.e. checkout the submodule commits
-	specified in the index of the containing repository. This will make
-	the submodules HEAD be detached.
+	Update the registered submodules, i.e. clone missing submodules and
+	checkout the commit specified in the index of the containing repository.
+	This will make the submodules HEAD be detached.


  OPTIONS
@@ -50,7 +50,7 @@ OPTIONS

  FILES
  -----
-When cloning submodules, a .gitmodules file in the top-level directory
+When initializing submodules, a .gitmodules file in the top-level directory
  of the containing repository is used to find the url of each submodule.
  This file should be formatted in the same way as $GIR_DIR/config. The key
  to each submodule url is "module.$path.url".
diff --git a/git-submodule.sh b/git-submodule.sh
index a89ea88..e7b6978 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -53,7 +53,7 @@ module_clone()
  }

  #
-# Run clone + checkout on missing submodules
+# Register submodules in .git/config
  #
  # $@ = requested paths (default to all)
  #
@@ -62,37 +62,23 @@ modules_init()
  	git ls-files --stage -- "$@" | grep -e '^160000 ' |
  	while read mode sha1 stage path
  	do
-		# Skip submodule paths that already contain a .git directory.
-		# This will also trigger if $path is a symlink to a git
-		# repository
-		test -d "$path"/.git && continue
+		# Skip already registered paths
+		url=$(git-config submodule."$path".url)
+		test -z "$url" || continue

  		url=$(GIT_CONFIG=.gitmodules git-config module."$path".url)
  		test -z "$url" &&
  		die "No url found for submodule '$path' in .gitmodules"

-		# MAYBE FIXME: this would be the place to check GIT_CONFIG
-		# for a preferred url for this submodule, possibly like this:
-		#
-		# modname=$(GIT_CONFIG=.gitmodules git-config module."$path".name)
-		# alturl=$(git-config module."$modname".url)
-		#
-		# This would let the versioned .gitmodules file use the submodule
-		# path as key, while the unversioned GIT_CONFIG would use the
-		# logical modulename (if present) as key. But this would need
-		# another fallback mechanism if the module wasn't named.
+		git-config submodule."$path".url "$url" ||
+		die "Failed to register url for submodule '$path'"

-		module_clone "$path" "$url" || exit
-
-		(unset GIT_DIR && cd "$path" && git-checkout -q "$sha1") ||
-		die "Checkout of submodule '$path' failed"
-
-		say "Submodule '$path' initialized"
+		say "Submodule '$path' registered with url '$url'"
  	done
  }

  #
-# Checkout correct revision of each initialized submodule
+# Update each submodule path to correct revision, using clone and checkout as needed
  #
  # $@ = requested paths (default to all)
  #
@@ -101,14 +87,21 @@ modules_update()
  	git ls-files --stage -- "$@" | grep -e '^160000 ' |
  	while read mode sha1 stage path
  	do
-		if ! test -d "$path"/.git
+		url=$(git-config submodule."$path".url)
+		if test -z "$url"
  		then
  			# Only mention uninitialized submodules when its
  			# path have been specified
  			test "$#" != "0" &&
  			say "Submodule '$path' not initialized"
-			continue;
+			continue
  		fi
+
+		if ! test -d "$path"/.git
+		then
+			module_clone "$path" "$url" || exit
+		fi
+
  		subsha1=$(unset GIT_DIR && cd "$path" &&
  			git-rev-parse --verify HEAD) ||
  		die "Unable to find current revision of submodule '$path'"
diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh
index 6274729..3940433 100755
--- a/t/t7400-submodule-basic.sh
+++ b/t/t7400-submodule-basic.sh
@@ -40,7 +40,7 @@ test_expect_success 'Prepare submodule testing' '
  	git-add a lib z &&
  	git-commit -m "super commit 1" &&
  	mv lib .subrepo &&
-	GIT_CONFIG=.gitmodules git-config module.lib.url ./.subrepo
+	GIT_CONFIG=.gitmodules git-config module.lib.url git://example.com/lib.git
  '

  test_expect_success 'status should only print one line' '
@@ -52,41 +52,55 @@ test_expect_success 'status should initially be "missing"' '
  	git-submodule status | grep "^-$rev1"
  '

-test_expect_success 'init should fail when path is used by a file' '
+test_expect_success 'init should register submodule url in .git/config' '
+	git-submodule init &&
+	url=$(git-config submodule.lib.url) &&
+	if test "$url" != "git://example.com/lib.git"
+	then
+		echo "[OOPS] init succeeded but submodule url is wrong"
+		false
+	elif ! git-config submodule.lib.url ./.subrepo
+	then
+		echo "[OOPS] init succeeded but update of url failed"
+		false
+	fi
+'
+
+test_expect_success 'update should fail when path is used by a file' '
  	echo "hello" >lib &&
-	if git-submodule init
+	if git-submodule update
  	then
-		echo "[OOPS] init should have failed"
+		echo "[OOPS] update should have failed"
  		false
  	elif test -f lib && test "$(cat lib)" != "hello"
  	then
-		echo "[OOPS] init failed but lib file was molested"
+		echo "[OOPS] update failed but lib file was molested"
  		false
  	else
  		rm lib
  	fi
  '

-test_expect_success 'init should fail when path is used by a nonempty directory' '
+test_expect_success 'update should fail when path is used by a nonempty directory' '
  	mkdir lib &&
  	echo "hello" >lib/a &&
-	if git-submodule init
+	if git-submodule update
  	then
-		echo "[OOPS] init should have failed"
+		echo "[OOPS] update should have failed"
  		false
  	elif test "$(cat lib/a)" != "hello"
  	then
-		echo "[OOPS] init failed but lib/a was molested"
+		echo "[OOPS] update failed but lib/a was molested"
  		false
  	else
  		rm lib/a
  	fi
  '

-test_expect_success 'init should work when path is an empty dir' '
+test_expect_success 'update should work when path is an empty dir' '
  	rm -rf lib &&
  	mkdir lib &&
-	git-submodule init &&
+	git-submodule update &&
  	head=$(cd lib && git-rev-parse HEAD) &&
  	if test -z "$head"
  	then
@@ -99,7 +113,7 @@ test_expect_success 'init should work when path is an empty dir' '
  	fi
  '

-test_expect_success 'status should be "up-to-date" after init' '
+test_expect_success 'status should be "up-to-date" after update' '
  	git-submodule status | grep "^ $rev1"
  '

-- 
1.5.2.841.gc9eafb

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] git-submodule: move cloning into a separate function
  2007-06-05 11:13       ` Lars Hjemli
@ 2007-06-06  8:55         ` Junio C Hamano
  2007-06-17 14:38         ` Sven Verdoolaege
  1 sibling, 0 replies; 11+ messages in thread
From: Junio C Hamano @ 2007-06-06  8:55 UTC (permalink / raw)
  To: Lars Hjemli; +Cc: Johannes Sixt, git@vger.kernel.org

"Lars Hjemli" <hjemli@gmail.com> writes:

> This is just a simple refactoring of modules_init() with no change in
> functionality.
>
> Signed-off-by: Lars Hjemli <hjemli@gmail.com>
> ---
>
> On Tue, 05 Jun 2007 12:40:50 +0200, Johannes Sixt <J.Sixt@eudaptics.com> wrote:
>
>> Lars Hjemli wrote:
>>> +               module_clone "$path" "$url" || exit $?
>>
>> Minor nit: The idiom that is commonly used in situations like this (see
>> other git-* shell scripts):
>>
>> 		module_clone "$path" "$url" || exit
>>
>> because exit without argument uses the code of the last command
>> executed.
>>
>
> Thanks, I'll follow up with matching changes to [patch 2/2].
>

This seems to be WS munged by your mailer.

> ...
> +	die "Clone of submodule '$path' failed"
> +}
> +
>   #
>   # Run clone + checkout on missing submodules
>   #
> @@ -40,20 +67,6 @@ modules_init()
>   		# repository

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 1/2] git-submodule: move cloning into a separate function
       [not found] ` <863f2ca67857bc2d09f46f1a5ef6f653d16d5256.1181034736.git.hjemli@gmail.com>
  2007-06-05  9:29   ` [PATCH 1/2] git-submodule: move cloning into a separate function Lars Hjemli
@ 2007-06-06  9:13   ` Lars Hjemli
       [not found]   ` <c14730acf8a52a57250303c033ebec09bf960007.1181034736.git.hjemli@gmail.com>
  2 siblings, 0 replies; 11+ messages in thread
From: Lars Hjemli @ 2007-06-06  9:13 UTC (permalink / raw)
  To: Junio C Hamano; +Cc: Johannes Sixt, git

This is just a simple refactoring of modules_init() with no change in
functionality.

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
---

On 6/6/07, Junio C Hamano <junkio@cox.net> wrote:
> This seems to be WS munged by your mailer.

Ouch, I didn't notice...


 git-submodule.sh |   44 ++++++++++++++++++++++++++++----------------
 1 files changed, 28 insertions(+), 16 deletions(-)

diff --git a/git-submodule.sh b/git-submodule.sh
index 6ed5a6c..a89ea88 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -25,6 +25,33 @@ say()
 	fi
 }
 
+
+#
+# Clone a submodule
+#
+module_clone()
+{
+	path=$1
+	url=$2
+
+	# If there already is a directory at the submodule path,
+	# expect it to be empty (since that is the default checkout
+	# action) and try to remove it.
+	# Note: if $path is a symlink to a directory the test will
+	# succeed but the rmdir will fail. We might want to fix this.
+	if test -d "$path"
+	then
+		rmdir "$path" 2>/dev/null ||
+		die "Directory '$path' exist, but is neither empty nor a git repository"
+	fi
+
+	test -e "$path" &&
+	die "A file already exist at path '$path'"
+
+	git-clone -n "$url" "$path" ||
+	die "Clone of submodule '$path' failed"
+}
+
 #
 # Run clone + checkout on missing submodules
 #
@@ -40,20 +67,6 @@ modules_init()
 		# repository
 		test -d "$path"/.git && continue
 
-		# If there already is a directory at the submodule path,
-		# expect it to be empty (since that is the default checkout
-		# action) and try to remove it.
-		# Note: if $path is a symlink to a directory the test will
-		# succeed but the rmdir will fail. We might want to fix this.
-		if test -d "$path"
-		then
-			rmdir "$path" 2>/dev/null ||
-			die "Directory '$path' exist, but is neither empty nor a git repository"
-		fi
-
-		test -e "$path" &&
-		die "A file already exist at path '$path'"
-
 		url=$(GIT_CONFIG=.gitmodules git-config module."$path".url)
 		test -z "$url" &&
 		die "No url found for submodule '$path' in .gitmodules"
@@ -69,8 +82,7 @@ modules_init()
 		# logical modulename (if present) as key. But this would need
 		# another fallback mechanism if the module wasn't named.
 
-		git-clone -n "$url" "$path" ||
-		die "Clone of submodule '$path' failed"
+		module_clone "$path" "$url" || exit
 
 		(unset GIT_DIR && cd "$path" && git-checkout -q "$sha1") ||
 		die "Checkout of submodule '$path' failed"
-- 
1.5.2.841.gc9eafb

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH 2/2] git-submodule: clone during update, not during init
       [not found]   ` <c14730acf8a52a57250303c033ebec09bf960007.1181034736.git.hjemli@gmail.com>
  2007-06-05  9:29     ` [PATCH 2/2] git-submodule: clone during update, not during init Lars Hjemli
@ 2007-06-06  9:13     ` Lars Hjemli
  1 sibling, 0 replies; 11+ messages in thread
From: Lars Hjemli @ 2007-06-06  9:13 UTC (permalink / raw)
  To: Junio C Hamano; +Cc: Johannes Sixt, git

This teaches 'git-submodule init' to register submodule paths and urls in
.git/config instead of actually cloning them. The cloning is now handled
as part of 'git-submodule update'.

With this change it is possible to specify preferred/alternate urls for
the submodules in .git/config before the submodules are cloned.

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
---
 Documentation/git-submodule.txt |   16 +++++++-------
 git-submodule.sh                |   41 ++++++++++++++++----------------------
 t/t7400-submodule-basic.sh      |   38 ++++++++++++++++++++++++-----------
 3 files changed, 51 insertions(+), 44 deletions(-)

diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt
index cb0424f..f8fb80f 100644
--- a/Documentation/git-submodule.txt
+++ b/Documentation/git-submodule.txt
@@ -23,15 +23,15 @@ status::
 	repository. This command is the default command for git-submodule.
 
 init::
-	Initialize the submodules, i.e. clone the git repositories specified
-	in the .gitmodules file and checkout the submodule commits specified
-	in the index of the containing repository. This will make the
-	submodules HEAD be detached.
+	Initialize the submodules, i.e. register in .git/config each submodule
+	path and url found in .gitmodules. The key used in git/config is
+	`submodule.$path.url`. This command does not alter existing information
+	in .git/config.
 
 update::
-	Update the initialized submodules, i.e. checkout the submodule commits
-	specified in the index of the containing repository. This will make
-	the submodules HEAD be detached.
+	Update the registered submodules, i.e. clone missing submodules and
+	checkout the commit specified in the index of the containing repository.
+	This will make the submodules HEAD be detached.
 
 
 OPTIONS
@@ -50,7 +50,7 @@ OPTIONS
 
 FILES
 -----
-When cloning submodules, a .gitmodules file in the top-level directory
+When initializing submodules, a .gitmodules file in the top-level directory
 of the containing repository is used to find the url of each submodule.
 This file should be formatted in the same way as $GIR_DIR/config. The key
 to each submodule url is "module.$path.url".
diff --git a/git-submodule.sh b/git-submodule.sh
index a89ea88..e7b6978 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -53,7 +53,7 @@ module_clone()
 }
 
 #
-# Run clone + checkout on missing submodules
+# Register submodules in .git/config
 #
 # $@ = requested paths (default to all)
 #
@@ -62,37 +62,23 @@ modules_init()
 	git ls-files --stage -- "$@" | grep -e '^160000 ' |
 	while read mode sha1 stage path
 	do
-		# Skip submodule paths that already contain a .git directory.
-		# This will also trigger if $path is a symlink to a git
-		# repository
-		test -d "$path"/.git && continue
+		# Skip already registered paths
+		url=$(git-config submodule."$path".url)
+		test -z "$url" || continue
 
 		url=$(GIT_CONFIG=.gitmodules git-config module."$path".url)
 		test -z "$url" &&
 		die "No url found for submodule '$path' in .gitmodules"
 
-		# MAYBE FIXME: this would be the place to check GIT_CONFIG
-		# for a preferred url for this submodule, possibly like this:
-		#
-		# modname=$(GIT_CONFIG=.gitmodules git-config module."$path".name)
-		# alturl=$(git-config module."$modname".url)
-		#
-		# This would let the versioned .gitmodules file use the submodule
-		# path as key, while the unversioned GIT_CONFIG would use the
-		# logical modulename (if present) as key. But this would need
-		# another fallback mechanism if the module wasn't named.
+		git-config submodule."$path".url "$url" ||
+		die "Failed to register url for submodule '$path'"
 
-		module_clone "$path" "$url" || exit
-
-		(unset GIT_DIR && cd "$path" && git-checkout -q "$sha1") ||
-		die "Checkout of submodule '$path' failed"
-
-		say "Submodule '$path' initialized"
+		say "Submodule '$path' registered with url '$url'"
 	done
 }
 
 #
-# Checkout correct revision of each initialized submodule
+# Update each submodule path to correct revision, using clone and checkout as needed
 #
 # $@ = requested paths (default to all)
 #
@@ -101,14 +87,21 @@ modules_update()
 	git ls-files --stage -- "$@" | grep -e '^160000 ' |
 	while read mode sha1 stage path
 	do
-		if ! test -d "$path"/.git
+		url=$(git-config submodule."$path".url)
+		if test -z "$url"
 		then
 			# Only mention uninitialized submodules when its
 			# path have been specified
 			test "$#" != "0" &&
 			say "Submodule '$path' not initialized"
-			continue;
+			continue
 		fi
+
+		if ! test -d "$path"/.git
+		then
+			module_clone "$path" "$url" || exit
+		fi
+
 		subsha1=$(unset GIT_DIR && cd "$path" &&
 			git-rev-parse --verify HEAD) ||
 		die "Unable to find current revision of submodule '$path'"
diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh
index 6274729..3940433 100755
--- a/t/t7400-submodule-basic.sh
+++ b/t/t7400-submodule-basic.sh
@@ -40,7 +40,7 @@ test_expect_success 'Prepare submodule testing' '
 	git-add a lib z &&
 	git-commit -m "super commit 1" &&
 	mv lib .subrepo &&
-	GIT_CONFIG=.gitmodules git-config module.lib.url ./.subrepo
+	GIT_CONFIG=.gitmodules git-config module.lib.url git://example.com/lib.git
 '
 
 test_expect_success 'status should only print one line' '
@@ -52,41 +52,55 @@ test_expect_success 'status should initially be "missing"' '
 	git-submodule status | grep "^-$rev1"
 '
 
-test_expect_success 'init should fail when path is used by a file' '
+test_expect_success 'init should register submodule url in .git/config' '
+	git-submodule init &&
+	url=$(git-config submodule.lib.url) &&
+	if test "$url" != "git://example.com/lib.git"
+	then
+		echo "[OOPS] init succeeded but submodule url is wrong"
+		false
+	elif ! git-config submodule.lib.url ./.subrepo
+	then
+		echo "[OOPS] init succeeded but update of url failed"
+		false
+	fi
+'
+
+test_expect_success 'update should fail when path is used by a file' '
 	echo "hello" >lib &&
-	if git-submodule init
+	if git-submodule update
 	then
-		echo "[OOPS] init should have failed"
+		echo "[OOPS] update should have failed"
 		false
 	elif test -f lib && test "$(cat lib)" != "hello"
 	then
-		echo "[OOPS] init failed but lib file was molested"
+		echo "[OOPS] update failed but lib file was molested"
 		false
 	else
 		rm lib
 	fi
 '
 
-test_expect_success 'init should fail when path is used by a nonempty directory' '
+test_expect_success 'update should fail when path is used by a nonempty directory' '
 	mkdir lib &&
 	echo "hello" >lib/a &&
-	if git-submodule init
+	if git-submodule update
 	then
-		echo "[OOPS] init should have failed"
+		echo "[OOPS] update should have failed"
 		false
 	elif test "$(cat lib/a)" != "hello"
 	then
-		echo "[OOPS] init failed but lib/a was molested"
+		echo "[OOPS] update failed but lib/a was molested"
 		false
 	else
 		rm lib/a
 	fi
 '
 
-test_expect_success 'init should work when path is an empty dir' '
+test_expect_success 'update should work when path is an empty dir' '
 	rm -rf lib &&
 	mkdir lib &&
-	git-submodule init &&
+	git-submodule update &&
 	head=$(cd lib && git-rev-parse HEAD) &&
 	if test -z "$head"
 	then
@@ -99,7 +113,7 @@ test_expect_success 'init should work when path is an empty dir' '
 	fi
 '
 
-test_expect_success 'status should be "up-to-date" after init' '
+test_expect_success 'status should be "up-to-date" after update' '
 	git-submodule status | grep "^ $rev1"
 '
 
-- 
1.5.2.841.gc9eafb

^ permalink raw reply related	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] git-submodule: move cloning into a separate function
  2007-06-05 11:13       ` Lars Hjemli
  2007-06-06  8:55         ` Junio C Hamano
@ 2007-06-17 14:38         ` Sven Verdoolaege
  2007-06-17 15:56           ` Lars Hjemli
  1 sibling, 1 reply; 11+ messages in thread
From: Sven Verdoolaege @ 2007-06-17 14:38 UTC (permalink / raw)
  To: Lars Hjemli; +Cc: Johannes Sixt, git@vger.kernel.org

On Tue, Jun 05, 2007 at 01:13:28PM +0200, Lars Hjemli wrote:
> +module_clone()
> +{
> +	path=$1
> +	url=$2
> +
> +	# If there already is a directory at the submodule path,
> +	# expect it to be empty (since that is the default checkout
> +	# action) and try to remove it.
> +	# Note: if $path is a symlink to a directory the test will
> +	# succeed but the rmdir will fail. We might want to fix this.
> +	if test -d "$path"
> +	then
> +		rmdir "$path" 2>/dev/null ||
> +		die "Directory '$path' exist, but is neither empty nor a git repository"

What makes you say that '$path' is not a git repository?

skimo

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/2] git-submodule: move cloning into a separate function
  2007-06-17 14:38         ` Sven Verdoolaege
@ 2007-06-17 15:56           ` Lars Hjemli
  0 siblings, 0 replies; 11+ messages in thread
From: Lars Hjemli @ 2007-06-17 15:56 UTC (permalink / raw)
  To: skimo; +Cc: Johannes Sixt, git@vger.kernel.org

On 6/17/07, Sven Verdoolaege <skimo@kotnet.org> wrote:
> On Tue, Jun 05, 2007 at 01:13:28PM +0200, Lars Hjemli wrote:
> > +module_clone()
> > +{
> > +     path=$1
> > +     url=$2
> > +
> > +     # If there already is a directory at the submodule path,
> > +     # expect it to be empty (since that is the default checkout
> > +     # action) and try to remove it.
> > +     # Note: if $path is a symlink to a directory the test will
> > +     # succeed but the rmdir will fail. We might want to fix this.
> > +     if test -d "$path"
> > +     then
> > +             rmdir "$path" 2>/dev/null ||
> > +             die "Directory '$path' exist, but is neither empty nor a git repository"
>
> What makes you say that '$path' is not a git repository?
>

The function assumes it's only invoked when no repo is present in $path/.git.

-- 
larsh

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2007-06-17 15:56 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-05  9:29 [PATCH 0/2] git-submodule: make it easier to use alternate urls Lars Hjemli
     [not found] ` <863f2ca67857bc2d09f46f1a5ef6f653d16d5256.1181034736.git.hjemli@gmail.com>
2007-06-05  9:29   ` [PATCH 1/2] git-submodule: move cloning into a separate function Lars Hjemli
2007-06-05 10:40     ` Johannes Sixt
2007-06-05 11:13       ` Lars Hjemli
2007-06-06  8:55         ` Junio C Hamano
2007-06-17 14:38         ` Sven Verdoolaege
2007-06-17 15:56           ` Lars Hjemli
2007-06-06  9:13   ` Lars Hjemli
     [not found]   ` <c14730acf8a52a57250303c033ebec09bf960007.1181034736.git.hjemli@gmail.com>
2007-06-05  9:29     ` [PATCH 2/2] git-submodule: clone during update, not during init Lars Hjemli
2007-06-05 11:18       ` Lars Hjemli
2007-06-06  9:13     ` Lars Hjemli

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).