From: "Ævar Arnfjörð Bjarmason" <avarab@gmail.com>
To: git@vger.kernel.org
Cc: "Jiang Xin" <worldhello.net@gmail.com>,
"Junio C Hamano" <gitster@pobox.com>,
"Bernhard Reiter" <ockham@raz.or.at>,
"Remi Pommarel" <repk@triplefau.lt>, "Jeff King" <peff@peff.net>,
"Ævar Arnfjörð Bjarmason" <avarab@gmail.com>
Subject: [PATCH v2 6/6] imap-send: correctly report "host" when using "tunnel"
Date: Thu, 2 Feb 2023 10:44:17 +0100 [thread overview]
Message-ID: <patch-v2-6.6-686febb8cdc-20230202T093706Z-avarab@gmail.com> (raw)
In-Reply-To: <cover-v2-0.6-00000000000-20230202T093706Z-avarab@gmail.com>
Before [1] we'd force the "imap.host" to be set, even if the
"imap.tunnel" was set, and then proceed to not use the "host" for
establishing a connection, as we'd use the tunneling command.
However, we'd still use the "imap.host" if it was set as the "host"
field given to the credential helper, and in messages that were shared
with the non-tunnel mode, until a preceding commit made these OpenSSL
codepaths tunnel-only.
Let's always give "host=tunnel" to the credential helper when in the
"imap.tunnel" mode, and rephrase the relevant messages to indicate
that we're tunneling. This changes the existing behavior, but that
behavior was emergent and didn't make much sense. If we were using
"imap.tunnel" the value in "imap.host" might be entirely unrelated to
the host we're tunneling to. Let's not pretend to know more than we do
in that case.
1. 34b5cd1fe9f (Don't force imap.host to be set when imap.tunnel is
set, 2008-04-22)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
---
imap-send.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/imap-send.c b/imap-send.c
index 9712a8d4f93..24b30c143a7 100644
--- a/imap-send.c
+++ b/imap-send.c
@@ -917,7 +917,7 @@ static void server_fill_credential(struct imap_server_conf *srvc, struct credent
return;
cred->protocol = xstrdup(srvc->use_ssl ? "imaps" : "imap");
- cred->host = xstrdup(srvc->host);
+ cred->host = xstrdup(srvc->tunnel ? "tunnel" : srvc->host);
cred->username = xstrdup_or_null(srvc->user);
cred->password = xstrdup_or_null(srvc->pass);
@@ -1004,7 +1004,7 @@ static struct imap_store *imap_open_store(struct imap_server_conf *srvc, const c
if (!CAP(AUTH_CRAM_MD5)) {
fprintf(stderr, "You specified "
"CRAM-MD5 as authentication method, "
- "but %s doesn't support it.\n", srvc->host);
+ "but tunnel doesn't support it.\n");
goto bail;
}
/* CRAM-MD5 */
@@ -1021,8 +1021,8 @@ static struct imap_store *imap_open_store(struct imap_server_conf *srvc, const c
}
} else {
if (CAP(NOLOGIN)) {
- fprintf(stderr, "Skipping account %s@%s, server forbids LOGIN\n",
- srvc->user, srvc->host);
+ fprintf(stderr, "Skipping account %s, server forbids LOGIN\n",
+ srvc->user);
goto bail;
}
if (!imap->buf.sock.ssl)
@@ -1434,12 +1434,9 @@ int cmd_main(int argc, const char **argv)
fprintf(stderr, "no imap store specified\n");
return 1;
}
- if (!server.host) {
- if (!server.tunnel) {
- fprintf(stderr, "no imap host specified\n");
- return 1;
- }
- server.host = "tunnel";
+ if (!server.host && !server.tunnel) {
+ fprintf(stderr, "no imap host specified\n");
+ return 1;
}
/* read the messages */
--
2.39.1.1392.g63e6d408230
next prev parent reply other threads:[~2023-02-02 9:45 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-01 11:31 [PATCH 1/2] Makefile: not use mismatched curl_config to check version Jiang Xin
2023-02-01 11:31 ` [PATCH 2/2] imap-send: not define USE_CURL_FOR_IMAP_SEND in Makefile Jiang Xin
2023-02-01 23:04 ` [PATCH] imap-send: replace auto-probe libcurl with hard dependency Ævar Arnfjörð Bjarmason
2023-02-01 23:22 ` Junio C Hamano
2023-02-01 23:56 ` Ævar Arnfjörð Bjarmason
2023-02-02 1:32 ` Junio C Hamano
2023-02-01 23:59 ` Jeff King
2023-02-02 0:20 ` Ævar Arnfjörð Bjarmason
2023-02-02 9:44 ` [PATCH v2 0/6] " Ævar Arnfjörð Bjarmason
2023-02-02 9:44 ` [PATCH v2 1/6] imap-send: note "auth_method", not "host" on auth method failure Ævar Arnfjörð Bjarmason
2023-02-02 19:11 ` Junio C Hamano
2023-02-02 9:44 ` [PATCH v2 2/6] imap-send doc: the imap.sslVerify is used with imap.tunnel Ævar Arnfjörð Bjarmason
2023-02-02 9:44 ` [PATCH v2 3/6] imap-send: replace auto-probe libcurl with hard dependency Ævar Arnfjörð Bjarmason
2023-02-02 19:33 ` Junio C Hamano
2023-02-02 9:44 ` [PATCH v2 4/6] imap-send: make --curl no-optional Ævar Arnfjörð Bjarmason
2023-02-02 20:42 ` Junio C Hamano
2023-02-03 21:46 ` Ævar Arnfjörð Bjarmason
2023-02-04 5:22 ` Junio C Hamano
2023-02-02 9:44 ` [PATCH v2 5/6] imap-send: remove old --no-curl codepath Ævar Arnfjörð Bjarmason
2023-02-02 20:43 ` Junio C Hamano
2023-02-02 9:44 ` Ævar Arnfjörð Bjarmason [this message]
2023-02-02 20:56 ` [PATCH v2 6/6] imap-send: correctly report "host" when using "tunnel" Junio C Hamano
2023-02-03 17:53 ` Jeff King
2023-02-03 21:12 ` Ævar Arnfjörð Bjarmason
2023-02-04 11:09 ` Jeff King
2023-02-05 21:51 ` Ævar Arnfjörð Bjarmason
2023-02-07 18:30 ` Jeff King
2023-02-07 20:39 ` Ævar Arnfjörð Bjarmason
2023-02-07 21:26 ` Junio C Hamano
2023-02-07 22:04 ` Ævar Arnfjörð Bjarmason
2023-02-07 22:16 ` Jeff King
2023-02-07 22:15 ` Jeff King
2023-02-07 22:24 ` Junio C Hamano
2023-02-08 1:06 ` Ævar Arnfjörð Bjarmason
2023-02-17 20:50 ` Jeff King
2023-02-06 21:41 ` Junio C Hamano
2023-02-01 18:06 ` [PATCH 1/2] Makefile: not use mismatched curl_config to check version Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=patch-v2-6.6-686febb8cdc-20230202T093706Z-avarab@gmail.com \
--to=avarab@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=ockham@raz.or.at \
--cc=peff@peff.net \
--cc=repk@triplefau.lt \
--cc=worldhello.net@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).