[PATCH] add a exit condition even for no stop case

[Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>]

Hi all,

As I said in the my last email, I'm running tests in a network with
heavy traffic, like, over 150 arp requests comming every second. Under these
condition, I found an issue in the receive_packets function.

On line 1456 of net/net.c there is a while (1) that only exits if there
is a stop condition and more then 10 packages or if there is no package
received.

If GRUB is idle and enter in this loop, the only condition to leave is
if it doesn't have incoming packages. In a network with heavy traffic
(like mine) this never happens.

The result is that GRUB becomes muted and freeze.

I made a small fix that exits this loop if the incoming packages rearch
a maximum level. I used 100 packages and it seems fine.

---
 grub-core/net/net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/grub-core/net/net.c b/grub-core/net/net.c
index 683ab28..f2e723b 100644
--- a/grub-core/net/net.c
+++ b/grub-core/net/net.c
@@ -1453,7 +1453,7 @@ receive_packets (struct grub_net_card *card, int *stop_condition)
 	}
       card->opened = 1;
     }
-  while (1)
+  while (received < 100)
     {
       /* Maybe should be better have a fixed number of packets for each card
 	 and just mark them as used and not used.  */ 
-- 
1.8.2.1


-- 
Paulo Flabiano Smorigo
IBM Linux Technology Center