From: "Vladimir 'φ-coder/phcoder' Serbinenko" <phcoder@gmail.com>
To: The development of GNU GRUB <grub-devel@gnu.org>
Subject: Re: [Patch] [bug #26237] multiple problems with usb devices
Date: Mon, 31 May 2010 14:23:05 +0200 [thread overview]
Message-ID: <4C03AA29.2020807@gmail.com> (raw)
In-Reply-To: <4C02E60A.3060407@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4352 bytes --]
Vladimir 'φ-coder/phcoder' Serbinenko wrote:
> Aleš Nesrsta wrote:
> Hello, Aleš. I've seen that your assignment was completed. I added you
> to grub contributors. Feel free to create a branch in branches/usb.
> Right now I'm busy but next week I should be able to assist. Perhaps
> even this week. Right now I send uncommitted changes sitting in my
> yeeloongfw branch. It's largely your rebased changes + few other things
> like shutting the controller down before booting OS to avoid memory used
> by OS to be clobbered by e.g. HCCA.
> Branch usb should contain pci improvements + your usb changes. If you
> have trouble with bzr or are short on time me (or perhaps someone else)
> can give a hand.
> This branch can go into mainline. Since mainline usb is in deplorable
> state there is no need to pass this changes through experimental at all.
> Merging into mainline doesn't mean that no further developpement should
> be done on usb, just that this part is already a huge improvement.
>
>
I've created a branch "usb" where I put all the yeeloong work and
previous version of your patch. Could you merge your latest patch into
it and test the whole on your systems?
>> Remaining problems:
>>
>> 1.
>> Some devices (at least my BUFFALO USB clip drive flash disk, more
>> precisely "ID 0ea0:2168 Ours Technology, Inc. Transcend JetFlash 2.0 /
>> Astone USB Drive") cannot transfer 4KB data blocks independent on
>> controller OHCI/UHCI - my workaround is not good.
>> But it is probably problem with low priority - device is working finally
>> but it is slower than another device.
>>
>>
>>
> Agreed
>
>> 2.
>> Some devices (at least my APACER cardreader "ID 058f:6366 Alcor Micro
>> Corp. Multi Flash Reader") are not working on UHCI. Such device does not
>> accept any control message and UHCI returns status 0x450007 - it means
>> STALL during sending SETUP packet.
>> It looks to be the same problem as described by Vladimir: "I have
>> somewhat similar issue with Geode OHCI controller right now: devices and
>> speeds are correctly seen but trying to send a message results in a halt
>> in first TD and error code 5.".
>>
>>
> The problem was that the port was plainly off due to Geode reaction on
> incorrect writes differring from that of other controllers.
>
>> But I have problem on UHCI, not on OHCI - on computer with OHCI is this
>> device working well (it is normal USB Mass Storage Bulk-Only device with
>> SCSI subclass)! Maybe it depends on "combined controllers" UHCI-EHCI,
>> OHCI-EHCI (?) - device is working on computer with OHCI only computer
>> and it is not working on computer with UHCI-EHCI controller. But any
>> other device is working well on both computers... I don't understand, I
>> currently have no idea what can be wrong. Does anybody know...?
>>
>>
>>
> Does this device work under OS on this computer? Some ports are plainly
> underpowered.
>
>> 3.
>> There is not working USB hub support, GRUB does not see device connected
>> via USB hub - does anybody know some details or have some specification
>> of USB Hub class ? I cannot find it on USB site (maybe I have not
>> sufficient patience...).
>>
>>
>> I will probably focus in OHCI speed-up now, i.e. I try to do some other
>> handling of ED to prevent changes in OHCI registers which are slowing
>> down OHCI performance (OHCI is approx. 3 times slower than UHCI now from
>> this reason).
>>
>>
> How useful would the interrupts be for this matter? If the answer is
> "very useful" I can implement them. Also we need some restructuring of
> code of both ohci and grub in general to decrease the wait time. I think
> specifically all the waits in init sequence. If system has 2 OHCI
> controllers currently you need to wait twice as long as with 1
> controllers while it's possible to init them in parallel and not wait
> longer than in the case of one controller.
>
>> Best regards
>> Ales
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Grub-devel mailing list
>> Grub-devel@gnu.org
>> http://lists.gnu.org/mailman/listinfo/grub-devel
>>
>
>
>
--
Regards
Vladimir 'φ-coder/phcoder' Serbinenko
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 293 bytes --]
next prev parent reply other threads:[~2010-05-31 12:23 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-14 22:23 [Patch] [bug #26237] multiple problems with usb devices Aleš Nesrsta
2010-04-02 20:46 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-04-07 19:49 ` Aleš Nesrsta
2010-04-07 20:39 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-04-08 21:27 ` Aleš Nesrsta
2010-04-16 16:39 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-04-20 20:14 ` Aleš Nesrsta
2010-04-24 19:50 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-04-28 8:20 ` Aleš Nesrsta
2010-05-09 13:50 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-05-21 23:46 ` Aleš Nesrsta
2010-05-22 1:20 ` Grégoire Sutre
2010-05-22 9:35 ` Colin Watson
2010-05-22 23:13 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-05-23 10:27 ` Aleš Nesrsta
2010-05-23 14:41 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-05-23 17:42 ` Aleš Nesrsta
2010-05-23 18:40 ` Thomas Schmitt
2010-05-23 17:51 ` [Patch] [bug #26237] " Vladimir 'φ-coder/phcoder' Serbinenko
2010-05-23 14:44 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-05-23 17:16 ` Aleš Nesrsta
2010-05-23 19:35 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-05-23 20:41 ` seth.goldberg
2010-05-25 18:58 ` Aleš Nesrsta
2010-05-30 16:51 ` Aleš Nesrsta
2010-05-30 22:26 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-05-31 4:16 ` Seth Goldberg
2010-05-31 12:23 ` Vladimir 'φ-coder/phcoder' Serbinenko [this message]
2010-05-31 21:54 ` Aleš Nesrsta
2010-06-01 0:18 ` [RFT] " Vladimir 'φ-coder/phcoder' Serbinenko
2010-06-01 21:14 ` Aleš Nesrsta
2010-06-02 0:27 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-06-02 3:02 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-06-02 19:39 ` Aleš Nesrsta
2010-06-02 20:14 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-06-03 11:47 ` Aleš Nesrsta
2010-06-12 17:05 ` [RFT] Re: [Patch] [bug #26237] multiple problems with usb devices - faster OHCI Aleš Nesrsta
2010-06-12 18:59 ` Aleš Nesrsta
2010-06-13 17:47 ` [RFT] Re: [Patch] [bug #26237] multiple problems with usb devices Aleš Nesrsta
2010-06-21 20:24 ` Aleš Nesrsta
2010-06-25 18:10 ` Vladimir 'φ-coder/phcoder' Serbinenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C03AA29.2020807@gmail.com \
--to=phcoder@gmail.com \
--cc=grub-devel@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox