Grub Development Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Vladimir 'φ-coder/phcoder' Serbinenko" <phcoder@gmail.com>
To: grub-devel@gnu.org
Subject: Re: Vendor power-on button
Date: Mon, 28 Jun 2010 10:28:04 +0200	[thread overview]
Message-ID: <4C285D14.9040808@gmail.com> (raw)
In-Reply-To: <20100620045258.GA1083@math.berkeley.edu>


[-- Attachment #1.1: Type: text/plain, Size: 1254 bytes --]

On 06/20/2010 06:52 AM, Paul Vojta wrote:
> On Sun, May 23, 2010 at 02:31:05PM +0200, Vladimir '??-coder/phcoder' Serbinenko wrote:
>   
>> Hello, all. I've just merged vendor power-on button support into
>> mainline. Here is extract from manual:
>>     
> [snip]
>
>   
>> If you have a laptop which has a similar feature could you figure your
>> address and contribute?
>>     
> I have a Dell XPS M1330, and GRUB_BUTTON_CMOS_ADDRESS=85:3 works also for me.
>
> However, I do have one question.
>
> I have it set up now to boot directly into Linux when I use the main power-on
> button, and I use the auxiliary button to get a boot menu, defaulting
> to Windows.  But when I boot Windows using that button, it starts up
> a MediaDirect setup screen (in addition to regular Windows).  Would it be
> possible to (optionally) clear the vendor power-on button bit in the
> cmos before booting?
>   
Please try the attached patch. And add:
GRUB_BUTTON_CMOS_CLEAN=yes
> --Paul Vojta, vojta@math.berkeley.edu
>
> _______________________________________________
> Grub-devel mailing list
> Grub-devel@gnu.org
> http://lists.gnu.org/mailman/listinfo/grub-devel
>
>   


-- 
Regards
Vladimir 'φ-coder/phcoder' Serbinenko


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.2: cmosclean.diff --]
[-- Type: text/x-diff; name="cmosclean.diff", Size: 2989 bytes --]

=== modified file 'commands/i386/cmostest.c'
--- commands/i386/cmostest.c	2010-05-22 18:28:09 +0000
+++ commands/i386/cmostest.c	2010-06-28 08:24:28 +0000
@@ -22,20 +22,32 @@
 #include <grub/cmos.h>
 
 static grub_err_t
-grub_cmd_cmostest (struct grub_command *cmd __attribute__ ((unused)),
-		   int argc, char *argv[])
+parse_args (int argc, char *argv[], int *byte, int *bit)
 {
-  int byte, bit;
   char *rest;
 
   if (argc != 1)
     return grub_error (GRUB_ERR_BAD_ARGUMENT, "Address required.");
 
-  byte = grub_strtoul (argv[0], &rest, 0);
+  *byte = grub_strtoul (argv[0], &rest, 0);
   if (*rest != ':')
     return grub_error (GRUB_ERR_BAD_ARGUMENT, "Address required.");
 
-  bit = grub_strtoul (rest + 1, 0, 0);
+  *bit = grub_strtoul (rest + 1, 0, 0);
+
+  return GRUB_ERR_NONE;
+}
+
+static grub_err_t
+grub_cmd_cmostest (struct grub_command *cmd __attribute__ ((unused)),
+		   int argc, char *argv[])
+{
+  int byte, bit;
+  grub_err_t err;
+
+  err = parse_args (argc, argv, &byte, &bit);
+  if (err)
+    return err;
 
   if (grub_cmos_read (byte) & (1 << bit))
     return GRUB_ERR_NONE;
@@ -43,7 +55,22 @@
   return grub_error (GRUB_ERR_TEST_FAILURE, "false");
 }
 
-static grub_command_t cmd;
+static grub_err_t
+grub_cmd_cmosclean (struct grub_command *cmd __attribute__ ((unused)),
+		    int argc, char *argv[])
+{
+  int byte, bit;
+  grub_err_t err;
+
+  err = parse_args (argc, argv, &byte, &bit);
+  if (err)
+    return err;
+
+  grub_cmos_write (byte, grub_cmos_read (byte) & (~(1 << bit)));
+  return GRUB_ERR_NONE;
+}
+
+static grub_command_t cmd, cmd_clean;
 
 \f
 GRUB_MOD_INIT(cmostest)
@@ -51,9 +78,13 @@
   cmd = grub_register_command ("cmostest", grub_cmd_cmostest,
 			       "cmostest BYTE:BIT",
 			       "Test bit at BYTE:BIT in CMOS.");
+  cmd_clean = grub_register_command ("cmosclean", grub_cmd_cmosclean,
+				     "cmosclean BYTE:BIT",
+				     "Clean bit at BYTE:BIT in CMOS.");
 }
 
 GRUB_MOD_FINI(cmostest)
 {
   grub_unregister_command (cmd);
+  grub_unregister_command (cmd_clean);
 }

=== modified file 'util/grub-mkconfig.in'
--- util/grub-mkconfig.in	2010-06-28 00:39:49 +0000
+++ util/grub-mkconfig.in	2010-06-28 08:26:35 +0000
@@ -254,6 +254,7 @@
   GRUB_HIDDEN_TIMEOUT_BUTTON \
   GRUB_TIMEOUT_BUTTON \
   GRUB_BUTTON_CMOS_ADDRESS \
+  GRUB_BUTTON_CMOS_CLEAN \
   GRUB_DISTRIBUTOR \
   GRUB_CMDLINE_LINUX \
   GRUB_CMDLINE_LINUX_DEFAULT \

=== modified file 'util/grub.d/00_header.in'
--- util/grub.d/00_header.in	2010-06-17 15:01:17 +0000
+++ util/grub.d/00_header.in	2010-06-28 08:25:59 +0000
@@ -253,6 +253,12 @@
 make_timeout "${GRUB_HIDDEN_TIMEOUT}" "${GRUB_TIMEOUT}"
 fi
 
+if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ] && [ "x$GRUB_BUTTON_CMOS_CLEAN" != "xyes" ]; then
+    cat <<EOF
+cmosclean $GRUB_BUTTON_CMOS_ADDRESS
+EOF
+fi
+
 # Play an initial tune
 if [ "x${GRUB_INIT_TUNE}" != "x" ] ; then
   cat << EOF


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 294 bytes --]

  reply	other threads:[~2010-06-28  8:41 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-23 12:31 Vendor power-on button Vladimir 'φ-coder/phcoder' Serbinenko
2010-06-20  4:52 ` Paul Vojta
2010-06-28  8:28   ` Vladimir 'φ-coder/phcoder' Serbinenko [this message]
2010-07-17  0:37     ` Paul Vojta
  -- strict thread matches above, loose matches on Subject: below --
2010-06-07  0:15 Henrique Ferreiro
2010-06-07 20:26 ` Vladimir 'φ-coder/phcoder' Serbinenko
2010-06-08 13:41   ` Henrique Ferreiro
2010-06-09 20:26     ` Vladimir 'φ-coder/phcoder' Serbinenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C285D14.9040808@gmail.com \
    --to=phcoder@gmail.com \
    --cc=grub-devel@gnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox