* How to develop and integrate brand new module into GRUB2?
@ 2013-09-26 7:28 Vijayakumar Venganti
2013-09-26 7:35 ` Vladimir 'φ-coder/phcoder' Serbinenko
0 siblings, 1 reply; 6+ messages in thread
From: Vijayakumar Venganti @ 2013-09-26 7:28 UTC (permalink / raw)
To: grub-devel
[-- Attachment #1: Type: text/plain, Size: 485 bytes --]
Dear Friends,
I need to develop a new module and integrate into GRUB2. I already have the
code written, my question is how to integrate the code into the existing
GRUB2 build system so that the code gets built when make is entered at
GRUB2's top level directory?
My module is located at <Working directory>/grub2/grub-core*
/testmodule/Makefile*
So, I want to run the Makefile inside testmodule and integrate that module
into GRUB2.
Any help is greatly appreciated..
Thanks,
Vijay
[-- Attachment #2: Type: text/html, Size: 1432 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to develop and integrate brand new module into GRUB2?
2013-09-26 7:28 How to develop and integrate brand new module into GRUB2? Vijayakumar Venganti
@ 2013-09-26 7:35 ` Vladimir 'φ-coder/phcoder' Serbinenko
2013-10-02 22:03 ` Mat Troi
0 siblings, 1 reply; 6+ messages in thread
From: Vladimir 'φ-coder/phcoder' Serbinenko @ 2013-09-26 7:35 UTC (permalink / raw)
To: The development of GNU GRUB
[-- Attachment #1: Type: text/plain, Size: 821 bytes --]
On 26.09.2013 09:28, Vijayakumar Venganti wrote:
> Dear Friends,
>
> I need to develop a new module and integrate into GRUB2. I already have
> the code written, my question is how to integrate the code into the
> existing GRUB2 build system so that the code gets built when make is
> entered at GRUB2's top level directory?
>
> My module is located at <Working
> directory>/grub2/grub-core*/testmodule/Makefile*
> So, I want to run the Makefile inside testmodule and integrate that
> module into GRUB2.
> Any help is greatly appreciated..
>
Do not create your own Makefile. Look at grub-conf/Makefile.core.def
>
> Thanks,
> Vijay
>
>
> _______________________________________________
> Grub-devel mailing list
> Grub-devel@gnu.org
> https://lists.gnu.org/mailman/listinfo/grub-devel
>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 291 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to develop and integrate brand new module into GRUB2?
2013-09-26 7:35 ` Vladimir 'φ-coder/phcoder' Serbinenko
@ 2013-10-02 22:03 ` Mat Troi
2013-10-02 22:25 ` Vladimir 'φ-coder/phcoder' Serbinenko
0 siblings, 1 reply; 6+ messages in thread
From: Mat Troi @ 2013-10-02 22:03 UTC (permalink / raw)
To: The development of GNU GRUB
[-- Attachment #1: Type: text/plain, Size: 2253 bytes --]
Hi Vijayakumar Venganti,
Sorry I overlooked your email last week :-( I had the same question before
and below is how I got it to work. You need to regenerate Makefile.in file
in your grub-core folder. First, you need to modify Makefile.core.am to
include your new module; to see how to do this, search in
Makefile.core.amfor "hello" module. You also need to modify
Makefile.core.def; again to
see how to do this, search in Makefile.core.def for "hello" module. On
another machine (will be referred to as machine B), you need to install
m4-1.4.6 at ftp://ftp.gnu.org/gnu/m4/, install autoconf-2.64, install
automake-1.11.2. Make sure your $PATH points to the stuff you just
installed. Then in your grub2 directory there should be a file named
autogen.sh. Copy autogen.sh and tries to run it on machine B. There will
be warnings/errors for missing files, depending on the warnings/errors copy
files from grub2 folder over to machine B. After autogen.sh runs
successfully, copy Makefile.in back to your work environment and from there
run your normal build.
I hope this helps,
Mat Troi
On Thu, Sep 26, 2013 at 12:35 AM, Vladimir 'φ-coder/phcoder' Serbinenko <
phcoder@gmail.com> wrote:
> On 26.09.2013 09:28, Vijayakumar Venganti wrote:
> > Dear Friends,
> >
> > I need to develop a new module and integrate into GRUB2. I already have
> > the code written, my question is how to integrate the code into the
> > existing GRUB2 build system so that the code gets built when make is
> > entered at GRUB2's top level directory?
> >
> > My module is located at <Working
> > directory>/grub2/grub-core*/testmodule/Makefile*
> > So, I want to run the Makefile inside testmodule and integrate that
> > module into GRUB2.
> > Any help is greatly appreciated..
> >
> Do not create your own Makefile. Look at grub-conf/Makefile.core.def
> >
> > Thanks,
> > Vijay
> >
> >
> > _______________________________________________
> > Grub-devel mailing list
> > Grub-devel@gnu.org
> > https://lists.gnu.org/mailman/listinfo/grub-devel
> >
>
>
>
> _______________________________________________
> Grub-devel mailing list
> Grub-devel@gnu.org
> https://lists.gnu.org/mailman/listinfo/grub-devel
>
>
[-- Attachment #2: Type: text/html, Size: 3529 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to develop and integrate brand new module into GRUB2?
2013-10-02 22:03 ` Mat Troi
@ 2013-10-02 22:25 ` Vladimir 'φ-coder/phcoder' Serbinenko
0 siblings, 0 replies; 6+ messages in thread
From: Vladimir 'φ-coder/phcoder' Serbinenko @ 2013-10-02 22:25 UTC (permalink / raw)
To: The development of GNU GRUB
[-- Attachment #1: Type: text/plain, Size: 2909 bytes --]
On 03.10.2013 00:03, Mat Troi wrote:
> Hi Vijayakumar Venganti,
>
> Sorry I overlooked your email last week :-( I had the same question
> before and below is how I got it to work. You need to regenerate
> Makefile.in file in your grub-core folder. First, you need to modify
> Makefile.core.am <http://Makefile.core.am> to include your new module;
> to see how to do this, search in Makefile.core.am
> <http://Makefile.core.am> for "hello" module. You also need to modify
> Makefile.core.def; again to see how to do this, search in
> Makefile.core.def for "hello" module. On another machine (will be
> referred to as machine B), you need to install m4-1.4.6 at
> ftp://ftp.gnu.org/gnu/m4/, install autoconf-2.64, install
> automake-1.11.2. Make sure your $PATH points to the stuff you just
> installed. Then in your grub2 directory there should be a file named
> autogen.sh. Copy autogen.sh and tries to run it on machine B. There
> will be warnings/errors for missing files, depending on the
> warnings/errors copy files from grub2 folder over to machine B. After
> autogen.sh runs successfully, copy Makefile.in back to your work
> environment and from there run your normal build.
>
"Why do easy if you can do complicated?"
Just change Makefile.core.def and rerun ./autogen.sh. That is.
> I hope this helps,
> Mat Troi
>
>
>
> On Thu, Sep 26, 2013 at 12:35 AM, Vladimir 'φ-coder/phcoder' Serbinenko
> <phcoder@gmail.com <mailto:phcoder@gmail.com>> wrote:
>
> On 26.09.2013 09 <tel:26.09.2013%2009>:28, Vijayakumar Venganti wrote:
> > Dear Friends,
> >
> > I need to develop a new module and integrate into GRUB2. I already
> have
> > the code written, my question is how to integrate the code into the
> > existing GRUB2 build system so that the code gets built when make is
> > entered at GRUB2's top level directory?
> >
> > My module is located at <Working
> > directory>/grub2/grub-core*/testmodule/Makefile*
> > So, I want to run the Makefile inside testmodule and integrate that
> > module into GRUB2.
> > Any help is greatly appreciated..
> >
> Do not create your own Makefile. Look at grub-conf/Makefile.core.def
> >
> > Thanks,
> > Vijay
> >
> >
> > _______________________________________________
> > Grub-devel mailing list
> > Grub-devel@gnu.org <mailto:Grub-devel@gnu.org>
> > https://lists.gnu.org/mailman/listinfo/grub-devel
> >
>
>
>
> _______________________________________________
> Grub-devel mailing list
> Grub-devel@gnu.org <mailto:Grub-devel@gnu.org>
> https://lists.gnu.org/mailman/listinfo/grub-devel
>
>
>
>
> _______________________________________________
> Grub-devel mailing list
> Grub-devel@gnu.org
> https://lists.gnu.org/mailman/listinfo/grub-devel
>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 291 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* How to develop and integrate brand new module into GRUB2?
@ 2013-08-28 0:21 Mat Troi
2013-08-31 11:19 ` Andrey Borzenkov
0 siblings, 1 reply; 6+ messages in thread
From: Mat Troi @ 2013-08-28 0:21 UTC (permalink / raw)
To: grub-devel
[-- Attachment #1: Type: text/plain, Size: 353 bytes --]
Hi,
I need to develop a new module and integrate into GRUB2. I already have the
code written, my question is how to integrate the code into the existing
GRUB2 build system so that the code gets built when make is entered at
GRUB2's top level directory?
My module is located at <Working
directory>/grub2/grub-core/testmodule/testmodule.c
Thanks,
Matt
[-- Attachment #2: Type: text/html, Size: 468 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to develop and integrate brand new module into GRUB2?
2013-08-28 0:21 Mat Troi
@ 2013-08-31 11:19 ` Andrey Borzenkov
0 siblings, 0 replies; 6+ messages in thread
From: Andrey Borzenkov @ 2013-08-31 11:19 UTC (permalink / raw)
To: The development of GNU GRUB; +Cc: mattroisang
В Tue, 27 Aug 2013 17:21:01 -0700
Mat Troi <mattroisang@gmail.com> пишет:
> Hi,
>
> I need to develop a new module and integrate into GRUB2. I already have the
> code written, my question is how to integrate the code into the existing
> GRUB2 build system so that the code gets built when make is entered at
> GRUB2's top level directory?
>
> My module is located at <Working
> directory>/grub2/grub-core/testmodule/testmodule.c
>
At the minimum you need to add
module = {
name = testmodule;
common = testmodule/testmodule.c;
}
to grub-core/Makefile.core.def
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-10-02 22:25 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-26 7:28 How to develop and integrate brand new module into GRUB2? Vijayakumar Venganti
2013-09-26 7:35 ` Vladimir 'φ-coder/phcoder' Serbinenko
2013-10-02 22:03 ` Mat Troi
2013-10-02 22:25 ` Vladimir 'φ-coder/phcoder' Serbinenko
-- strict thread matches above, loose matches on Subject: below --
2013-08-28 0:21 Mat Troi
2013-08-31 11:19 ` Andrey Borzenkov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).