grub-devel.gnu.org archive mirror
 help / color / mirror / Atom feed
From: Andrei Borzenkov <arvidjaar@gmail.com>
To: "Rivard, Matthew T" <matthew.t.rivard@intel.com>,
	The development of GNU GRUB <grub-devel@gnu.org>
Subject: Re: [PATCH][WiP] native DHCPv4 support in net_bootp
Date: Sat, 19 Mar 2016 07:51:55 +0300	[thread overview]
Message-ID: <56ECDAEB.8090602@gmail.com> (raw)
In-Reply-To: <EEEB59C9688B214382E250B0063276B97FF181@ORSMSX102.amr.corp.intel.com>

19.03.2016 04:03, Rivard, Matthew T пишет:
> Thanks for the patch, finally had an opportunity to apply it and test
> it.   It did require disabling -Werror in order for the diff that was
> originally supplied to compile, as there's a couple of variables that
> were throwing uninitialized warnings.
> 

Build log would be helpful.

> 
> -----Original Message----- From: Andrei Borzenkov
> [mailto:arvidjaar@gmail.com] Sent: Sunday, January 17, 2016 7:42 AM 
> To: Rivard, Matthew T <matthew.t.rivard@intel.com>; The development
> of GNU GRUB <grub-devel@gnu.org> Subject: [PATCH][WiP] native DHCPv4
> support in net_bootp
> 
> 14.10.2015 23:09, Andrei Borzenkov пишет:
>> 14.10.2015 21:09, Rivard, Matthew T пишет:
>>> Just going by these definitions of bootp and dhcp here: 
>>> https://technet.microsoft.com/en-us/library/cc781243%28v=ws.10%29.asp
>>>
>>> 
x
>>> 
>>> The net_bootp only works with a bootp enabled scope on the dhcp
>>> server after chaining from iPXE to grub2.   Without a "bootp"
>>> scope setup on the dhcp, calling net_bootp on the adapter fails
>>> to get an IP address.
>>> 
>>> So, I guess I could more clearly word that the bootp protocol
>>> works when calling net_bootp, but standard dhcp isn't.
>>> 
>> 
>> Hmm ... you are right; we are actually doing BOOTP here, not DHCP.
>> 
> 
> This patch adds support for native DHCPv4 and removes requirement for
> BOOTP compatibility support in DHCP server.
> 
> This is work in progress, but this works for me in test environment.
> 
> Patch changes net_bootp to implement full DHCP transaction. it still
> /should/ work with BOOTP pure server (untested, I do not have one).
> It also re-implements option processing to support overloaded fields
> and consolidates it in one place.
> 
> What is currently not implemented
> 
> - per interface, per transaction stage retransmit timer. Will be
> done.
> 
> - DHCP server selection. We take first DHCPOFFER or BOOTPREPLY. No
> plans to implement.
> 
> - DHCP option concatenation (RFC3396). I do not expect to hit it in
> real life; could be implemented relatively easy if needed.
> 
> - client identifier (RFC6842). I do not expect to hit it in real
> life; could be added easily if needed.
> 



  reply	other threads:[~2016-03-19  4:52 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <EEEB59C9688B214382E250B0063276B96CEE43@ORSMSX102.amr.corp.intel.com>
     [not found] ` <55FB8A5F.6040404@gmail.com>
     [not found]   ` <EEEB59C9688B214382E250B0063276B96CF050@ORSMSX102.amr.corp.intel.com>
2015-10-14  6:13     ` iPXE efi chainloading grub2 pxe efi file Andrei Borzenkov
2015-10-14 16:56       ` Rivard, Matthew T
2015-10-14 18:03         ` Andrei Borzenkov
2015-10-14 18:09           ` Rivard, Matthew T
2015-10-14 18:23             ` Andrei Borzenkov
2015-10-14 21:12               ` Rivard, Matthew T
2015-10-14 20:09             ` Andrei Borzenkov
2016-01-17 15:41               ` [PATCH][WiP] native DHCPv4 support in net_bootp Andrei Borzenkov
2016-01-21 18:37                 ` Mark Rutland
2016-03-19  1:03                 ` Rivard, Matthew T
2016-03-19  4:51                   ` Andrei Borzenkov [this message]
2015-10-15 17:46       ` [ipxe-devel] iPXE efi chainloading grub2 pxe efi file Michael Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56ECDAEB.8090602@gmail.com \
    --to=arvidjaar@gmail.com \
    --cc=grub-devel@gnu.org \
    --cc=matthew.t.rivard@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).