From: Glenn Washburn <development@efficientek.com>
To: grub-devel@gnu.org
Cc: Daniel Kiper <dkiper@net-space.pl>,
Patrick Steinhardt <ps@pks.im>,
Glenn Washburn <development@efficientek.com>
Subject: [PATCH v2 09/10] cryptodisk: Rename offset in grub_cryptodisk_t to offset_sectors.
Date: Sat, 3 Oct 2020 17:55:33 -0500 [thread overview]
Message-ID: <a165791de0d39f466db79430699c1e2f38b7bf3c.1601765266.git.development@efficientek.com> (raw)
In-Reply-To: <cover.1601765266.git.development@efficientek.com>
This makes it clear that the offset represents sectors, not bytes, in order
to improve readability.
Signed-off-by: Glenn Washburn <development@efficientek.com>
---
grub-core/disk/cryptodisk.c | 10 +++++-----
grub-core/disk/geli.c | 2 +-
grub-core/disk/luks.c | 4 ++--
grub-core/disk/luks2.c | 4 ++--
include/grub/cryptodisk.h | 7 ++++++-
5 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/grub-core/disk/cryptodisk.c b/grub-core/disk/cryptodisk.c
index f5d098f65..64a51165c 100644
--- a/grub-core/disk/cryptodisk.c
+++ b/grub-core/disk/cryptodisk.c
@@ -766,10 +766,10 @@ grub_cryptodisk_read (grub_disk_t disk, grub_disk_addr_t sector,
grub_dprintf ("cryptodisk",
"Reading %" PRIuGRUB_SIZE " sectors from sector 0x%"
PRIxGRUB_UINT64_T " with offset of %" PRIuGRUB_UINT64_T "\n",
- size, sector, dev->offset);
+ size, sector, dev->offset_sectors);
err = grub_disk_read (dev->source_disk,
- grub_disk_from_native_sector (disk, sector + dev->offset),
+ grub_disk_from_native_sector (disk, sector + dev->offset_sectors),
0, size << disk->log_sector_size, buf);
if (err)
{
@@ -815,7 +815,7 @@ grub_cryptodisk_write (grub_disk_t disk, grub_disk_addr_t sector,
grub_dprintf ("cryptodisk",
"Writing %" PRIuGRUB_SIZE " sectors to sector 0x%"
PRIxGRUB_UINT64_T " with offset of %" PRIuGRUB_UINT64_T "\n",
- size, sector, dev->offset);
+ size, sector, dev->offset_sectors);
gcry_err = grub_cryptodisk_endecrypt (dev, (grub_uint8_t *) tmp,
size << disk->log_sector_size,
@@ -827,7 +827,7 @@ grub_cryptodisk_write (grub_disk_t disk, grub_disk_addr_t sector,
}
/* Since ->write was called so disk.mod is loaded but be paranoid */
- sector = sector + dev->offset;
+ sector = sector + dev->offset_sectors;
if (grub_disk_write_weak)
err = grub_disk_write_weak (dev->source_disk,
grub_disk_from_native_sector (disk, sector),
@@ -1240,7 +1240,7 @@ luks_script_get (grub_size_t *sz)
ptr = grub_stpcpy (ptr, "luks_mount ");
ptr = grub_stpcpy (ptr, i->uuid);
*ptr++ = ' ';
- grub_snprintf (ptr, 21, "%" PRIuGRUB_UINT64_T " ", i->offset);
+ grub_snprintf (ptr, 21, "%" PRIuGRUB_UINT64_T " ", i->offset_sectors);
while (*ptr)
ptr++;
for (iptr = i->cipher->cipher->name; *iptr; iptr++)
diff --git a/grub-core/disk/geli.c b/grub-core/disk/geli.c
index 4ec875821..0175ce4c4 100644
--- a/grub-core/disk/geli.c
+++ b/grub-core/disk/geli.c
@@ -361,7 +361,7 @@ configure_ciphers (grub_disk_t disk, const char *check_uuid,
}
newdev->cipher = cipher;
newdev->secondary_cipher = secondary_cipher;
- newdev->offset = 0;
+ newdev->offset_sectors = 0;
newdev->source_disk = NULL;
newdev->benbi_log = 0;
if (grub_le_to_cpu16 (header.alg) == 0x16)
diff --git a/grub-core/disk/luks.c b/grub-core/disk/luks.c
index 545734342..88f2da493 100644
--- a/grub-core/disk/luks.c
+++ b/grub-core/disk/luks.c
@@ -122,10 +122,10 @@ configure_ciphers (grub_disk_t disk, const char *check_uuid,
newdev = grub_zalloc (sizeof (struct grub_cryptodisk));
if (!newdev)
return NULL;
- newdev->offset = grub_be_to_cpu32 (header.payloadOffset);
+ newdev->offset_sectors = grub_be_to_cpu32 (header.payloadOffset);
newdev->source_disk = NULL;
newdev->log_sector_size = LUKS1_LOG_SECTOR_SIZE;
- newdev->total_sectors = grub_disk_get_size (disk) - newdev->offset;
+ newdev->total_sectors = grub_disk_get_size (disk) - newdev->offset_sectors;
grub_memcpy (newdev->uuid, uuid, sizeof (uuid));
newdev->modname = "luks";
diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c
index 2e295cac8..46abc96ef 100644
--- a/grub-core/disk/luks2.c
+++ b/grub-core/disk/luks2.c
@@ -612,12 +612,12 @@ luks2_recover_key (grub_disk_t disk,
grub_dprintf ("luks2", "Trying keyslot %"PRIuGRUB_UINT64_T"\n", keyslot_key);
/* Set up disk according to keyslot's segment. */
- crypt->offset = grub_divmod64 (segment.offset, segment.sector_size, NULL);
+ crypt->offset_sectors = grub_divmod64 (segment.offset, segment.sector_size, NULL);
crypt->log_sector_size = sizeof (unsigned int) * 8
- __builtin_clz ((unsigned int) segment.sector_size) - 1;
if (grub_strcmp (segment.size, "dynamic") == 0)
crypt->total_sectors = (grub_disk_get_size (disk) >> (crypt->log_sector_size - disk->log_sector_size))
- - crypt->offset;
+ - crypt->offset_sectors;
else
crypt->total_sectors = grub_strtoull (segment.size, NULL, 10) >> crypt->log_sector_size;
diff --git a/include/grub/cryptodisk.h b/include/grub/cryptodisk.h
index 9e10ae927..c8eef2204 100644
--- a/include/grub/cryptodisk.h
+++ b/include/grub/cryptodisk.h
@@ -72,7 +72,12 @@ struct grub_cryptodisk
struct grub_cryptodisk **prev;
char *source;
- grub_disk_addr_t offset;
+
+ /*
+ * The number of sectors the start of the encrypted data is offset into the
+ * underlying disk, where sectors are the size noted by log_sector_size.
+ */
+ grub_disk_addr_t offset_sectors;
/* Total number of encrypted sectors of size (1<<log_sector_size) */
grub_disk_addr_t total_sectors;
grub_disk_t source_disk;
--
2.27.0
next prev parent reply other threads:[~2020-10-03 22:56 UTC|newest]
Thread overview: 289+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-03 21:45 [PATCH 00/10] Cryptodisk fixes for v2.06 redux Glenn Washburn
2020-10-03 21:45 ` [PATCH 01/10] luks2: Fix use of incorrect index and some grub_error() messages Glenn Washburn
2020-10-03 21:45 ` [PATCH 02/10] luks2: Improve readability in luks2_get_keyslot Glenn Washburn
2020-10-03 21:45 ` [PATCH 03/10] luks2: Use more intuitive keyslot key instead of index when naming keyslot Glenn Washburn
2020-10-03 21:45 ` [PATCH 04/10] luks2: grub_cryptodisk_t->total_length is the max number of device native sectors Glenn Washburn
2020-10-03 21:45 ` [PATCH 05/10] cryptodisk: Fix cipher IV mode 'plain64' always being set as 'plain' Glenn Washburn
2020-10-03 21:45 ` [PATCH 06/10] cryptodisk: Properly handle non-512 byte sized sectors Glenn Washburn
2020-10-03 21:46 ` [PATCH 07/10] cryptodisk: Replace some literals with constants in grub_cryptodisk_endecrypt Glenn Washburn
2020-10-03 21:46 ` [PATCH 08/10] cryptodisk: Rename total_length field in grub_cryptodisk_t to total_sectors Glenn Washburn
2020-10-03 21:46 ` [PATCH 09/10] cryptodisk: Rename offset in grub_cryptodisk_t to offset_sectors Glenn Washburn
2020-10-03 21:46 ` [PATCH 10/10] luks2: Rename source disk variabled named 'disk' to 'source' as in luks.c Glenn Washburn
2020-10-03 22:55 ` [PATCH v2 00/10] Cryptodisk fixes for v2.06 redux Glenn Washburn
2020-10-03 22:55 ` [PATCH v2 01/10] luks2: Fix use of incorrect index and some grub_error() messages Glenn Washburn
2020-10-09 9:38 ` Patrick Steinhardt
2020-10-03 22:55 ` [PATCH v2 02/10] luks2: Improve readability in luks2_get_keyslot Glenn Washburn
2020-10-03 22:55 ` [PATCH v2 03/10] luks2: Use more intuitive keyslot key instead of index when naming keyslot Glenn Washburn
2020-10-09 9:44 ` Patrick Steinhardt
2020-10-18 19:05 ` Glenn Washburn
2020-10-03 22:55 ` [PATCH v2 04/10] luks2: grub_cryptodisk_t->total_length is the max number of device native sectors Glenn Washburn
2020-10-09 9:45 ` Patrick Steinhardt
2020-10-03 22:55 ` [PATCH v2 05/10] cryptodisk: Fix cipher IV mode 'plain64' always being set as 'plain' Glenn Washburn
2020-10-03 22:55 ` [PATCH v2 06/10] cryptodisk: Properly handle non-512 byte sized sectors Glenn Washburn
2020-10-09 9:50 ` Patrick Steinhardt
2020-10-18 18:38 ` Glenn Washburn
2020-10-03 22:55 ` [PATCH v2 07/10] cryptodisk: Replace some literals with constants in grub_cryptodisk_endecrypt Glenn Washburn
2020-10-18 18:23 ` Glenn Washburn
2020-10-19 11:27 ` Daniel Kiper
2020-10-03 22:55 ` [PATCH v2 08/10] cryptodisk: Rename total_length field in grub_cryptodisk_t to total_sectors Glenn Washburn
2020-10-09 9:55 ` Patrick Steinhardt
2020-10-03 22:55 ` Glenn Washburn [this message]
2020-10-09 9:56 ` [PATCH v2 09/10] cryptodisk: Rename offset in grub_cryptodisk_t to offset_sectors Patrick Steinhardt
2020-10-03 22:55 ` [PATCH v2 10/10] luks2: Rename source disk variabled named 'disk' to 'source' as in luks.c Glenn Washburn
2020-10-09 10:00 ` Patrick Steinhardt
2020-10-19 16:27 ` Glenn Washburn
2020-10-23 17:46 ` Patrick Steinhardt
2020-10-09 10:01 ` [PATCH v2 00/10] Cryptodisk fixes for v2.06 redux Patrick Steinhardt
2020-10-19 23:09 ` [PATCH v3 " Glenn Washburn
2020-10-19 23:09 ` [PATCH v3 01/10] luks2: Fix use of incorrect index and some grub_error() messages Glenn Washburn
2020-10-23 12:08 ` Daniel Kiper
2020-10-23 17:52 ` Patrick Steinhardt
2020-10-19 23:09 ` [PATCH v3 02/10] luks2: Improve readability in luks2_get_keyslot Glenn Washburn
2020-10-23 12:14 ` Daniel Kiper
2020-10-29 21:52 ` Glenn Washburn
2020-10-30 13:15 ` Daniel Kiper
2020-10-19 23:09 ` [PATCH v3 03/10] luks2: Use more intuitive keyslot key instead of index when naming keyslot Glenn Washburn
2020-10-23 17:55 ` Patrick Steinhardt
2020-10-19 23:09 ` [PATCH v3 04/10] luks2: grub_cryptodisk_t->total_length is the max number of device native sectors Glenn Washburn
2020-10-23 18:03 ` Patrick Steinhardt
2020-10-19 23:09 ` [PATCH v3 05/10] cryptodisk: Fix cipher IV mode 'plain64' always being set as 'plain' Glenn Washburn
2020-10-23 12:21 ` Daniel Kiper
2020-10-19 23:09 ` [PATCH v3 06/10] cryptodisk: Properly handle non-512 byte sized sectors Glenn Washburn
2020-10-23 18:09 ` Patrick Steinhardt
2020-10-26 15:43 ` Daniel Kiper
2020-10-30 20:47 ` Daniel Kiper
2020-11-06 19:08 ` Glenn Washburn
2020-11-19 14:25 ` Daniel Kiper
2020-11-20 5:18 ` Glenn Washburn
2020-11-20 14:17 ` Daniel Kiper
2020-11-20 23:28 ` Glenn Washburn
2020-10-19 23:09 ` [PATCH v3 07/10] cryptodisk: Replace some literals with constants in grub_cryptodisk_endecrypt Glenn Washburn
2020-10-23 18:01 ` Patrick Steinhardt
2020-10-26 18:25 ` Glenn Washburn
2020-10-28 18:16 ` Patrick Steinhardt
2020-10-27 18:03 ` Daniel Kiper
2020-10-29 21:51 ` Glenn Washburn
2020-10-30 13:11 ` Daniel Kiper
2020-10-19 23:09 ` [PATCH v3 08/10] cryptodisk: Rename total_length field in grub_cryptodisk_t to total_sectors Glenn Washburn
2020-10-23 17:58 ` Patrick Steinhardt
2020-10-27 18:06 ` Daniel Kiper
2020-10-19 23:09 ` [PATCH v3 09/10] cryptodisk: Rename offset in grub_cryptodisk_t to offset_sectors Glenn Washburn
2020-10-23 17:58 ` Patrick Steinhardt
2020-10-27 18:07 ` Daniel Kiper
2020-10-19 23:09 ` [PATCH v3 10/10] luks2: Rename source disk variabled named 'disk' to 'source' as in luks.c Glenn Washburn
2020-10-23 18:01 ` Patrick Steinhardt
2020-10-27 18:09 ` Daniel Kiper
2020-10-27 19:25 ` [PATCH v3 00/10] Cryptodisk fixes for v2.06 redux Daniel Kiper
2020-11-02 15:56 ` Daniel Kiper
2020-11-03 18:50 ` Glenn Washburn
2020-11-04 12:44 ` Daniel Kiper
2020-11-07 4:44 ` [PATCH v4 00/15] " Glenn Washburn
2020-11-07 4:44 ` [PATCH v4 01/15] cryptodisk: Rename total_length field in grub_cryptodisk_t to total_sectors Glenn Washburn
2020-11-15 9:37 ` Patrick Steinhardt
2020-11-16 16:22 ` Daniel Kiper
2020-11-07 4:44 ` [PATCH v4 02/15] cryptodisk: Rename offset in grub_cryptodisk_t to offset_sectors Glenn Washburn
2020-11-15 9:38 ` Patrick Steinhardt
2020-11-16 16:25 ` Daniel Kiper
2020-11-07 4:44 ` [PATCH v4 03/15] luks2: Rename source disk variabled named 'disk' to 'source' as in luks.c Glenn Washburn
2020-11-15 9:39 ` Patrick Steinhardt
2020-11-16 16:27 ` Daniel Kiper
2020-11-07 4:44 ` [PATCH v4 04/15] types: Define GRUB_CHAR_BIT based on compiler macro instead of using literal Glenn Washburn
2020-11-15 9:42 ` Patrick Steinhardt
2020-11-16 16:31 ` Daniel Kiper
2020-11-07 4:44 ` [PATCH v4 05/15] luks2: Use correct index variable when looping in luks2_get_keyslot Glenn Washburn
2020-11-15 9:43 ` Patrick Steinhardt
2020-11-16 16:35 ` Daniel Kiper
2020-11-07 4:44 ` [PATCH v4 06/15] luks2: Rename variable i to keyslot_idx " Glenn Washburn
2020-11-15 9:43 ` Patrick Steinhardt
2020-11-16 16:37 ` Daniel Kiper
2020-11-07 4:44 ` [PATCH v4 07/15] luks2: Rename index variable j to i Glenn Washburn
2020-11-15 9:44 ` Patrick Steinhardt
2020-11-16 16:38 ` Daniel Kiper
2020-11-07 4:44 ` [PATCH v4 08/15] luks2: Split idx into three variables: keyslot_key, digest_key, segment_key Glenn Washburn
2020-11-15 9:48 ` Patrick Steinhardt
2020-11-17 13:47 ` Daniel Kiper
2020-11-20 8:39 ` Glenn Washburn
2020-11-07 4:44 ` [PATCH v4 09/15] luks2: Improve error messages in luks2_get_keyslot Glenn Washburn
2020-11-15 9:52 ` Patrick Steinhardt
2020-11-17 13:51 ` Daniel Kiper
2020-11-07 4:44 ` [PATCH v4 10/15] luks2: Use more intuitive keyslot key instead of index when naming keyslot Glenn Washburn
2020-11-15 9:55 ` Patrick Steinhardt
2020-11-20 8:40 ` Glenn Washburn
2020-11-07 4:44 ` [PATCH v4 11/15] cryptodisk: Replace some literals with constants in grub_cryptodisk_endecrypt Glenn Washburn
2020-11-15 9:59 ` Patrick Steinhardt
2020-11-20 8:41 ` Glenn Washburn
2020-11-07 4:44 ` [PATCH v4 12/15] luks2: grub_cryptodisk_t->total_length is the max number of device native sectors Glenn Washburn
2020-11-15 10:00 ` Patrick Steinhardt
2020-11-17 14:06 ` Daniel Kiper
2020-11-20 8:41 ` Glenn Washburn
2020-11-07 4:44 ` [PATCH v4 13/15] cryptodisk: Properly handle non-512 byte sized sectors Glenn Washburn
2020-11-15 10:07 ` Patrick Steinhardt
2020-11-20 8:42 ` Glenn Washburn
2020-11-22 12:30 ` Patrick Steinhardt
2020-11-07 4:44 ` [PATCH v4 14/15] luks2: Better error handling when setting up the cryptodisk Glenn Washburn
2020-11-15 10:13 ` Patrick Steinhardt
2020-11-20 8:44 ` Glenn Washburn
2020-11-17 14:26 ` Daniel Kiper
2020-11-20 8:44 ` Glenn Washburn
2020-11-20 20:24 ` Daniel Kiper
2020-11-20 23:58 ` Glenn Washburn
2020-11-07 4:44 ` [PATCH v4 15/15] luks2: Error check segment.sector_size Glenn Washburn
2020-11-15 10:42 ` Patrick Steinhardt
2020-11-17 14:28 ` Daniel Kiper
2020-11-17 14:34 ` [PATCH v4 00/15] Cryptodisk fixes for v2.06 redux Daniel Kiper
2020-11-23 5:23 ` [PATCH v5 00/11] " Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 01/11] luks2: Add slot_key member to struct grub_luks2_keyslot/segment/digest Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 02/11] luks: Use more intuitive slot key instead of index in user messages Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 03/11] cryptodisk: Replace some literals with constants in grub_cryptodisk_endecrypt Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 04/11] luks2: grub_cryptodisk_t->total_sectors is the max number of device native sectors Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 05/11] cryptodisk: Properly handle non-512 byte sized sectors Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 06/11] luks2: Better error handling when setting up the cryptodisk Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 07/11] luks2: Error check segment.sector_size Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 08/11] whitespace: convert 8 spaces to tabs Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 09/11] mips: Enable __clzdi2() Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 10/11] misc: Add grub_log2ull macro for calculating log base 2 of 64-bit integers Glenn Washburn
2020-11-23 5:23 ` [PATCH v5 11/11] luks2: Use grub_log2ull to calculate log_sector_size and improve readability Glenn Washburn
2020-11-27 9:03 ` [PATCH v6 00/12] Cryptodisk fixes for v2.06 redux Glenn Washburn
2020-11-27 9:03 ` [PATCH v6 01/12] luks2: Add slot_key member to struct grub_luks2_keyslot/segment/digest Glenn Washburn
2020-12-02 17:01 ` Daniel Kiper
2020-12-03 7:23 ` Glenn Washburn
2020-12-03 12:35 ` Daniel Kiper
2020-12-03 16:46 ` Glenn Washburn
2020-12-04 13:23 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 02/12] luks2: Use more intuitive slot key instead of index in user messages Glenn Washburn
2020-12-02 17:23 ` Daniel Kiper
2020-12-03 7:24 ` Glenn Washburn
2020-12-03 12:39 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 03/12] luks2: Remove unused argument in grub_error Glenn Washburn
2020-12-02 17:24 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 04/12] cryptodisk: Replace some literals with constants in grub_cryptodisk_endecrypt Glenn Washburn
2020-12-02 17:37 ` Daniel Kiper
2020-12-03 8:29 ` Glenn Washburn
2020-12-03 12:44 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 05/12] luks2: grub_cryptodisk_t->total_sectors is the max number of device native sectors Glenn Washburn
2020-12-02 17:56 ` Daniel Kiper
2020-12-03 8:54 ` Glenn Washburn
2020-12-03 12:45 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 06/12] cryptodisk: Properly handle non-512 byte sized sectors Glenn Washburn
2020-12-03 13:04 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 07/12] luks2: Better error handling when setting up the cryptodisk Glenn Washburn
2020-12-03 13:31 ` Daniel Kiper
2020-12-03 16:24 ` Glenn Washburn
2020-12-04 13:19 ` Daniel Kiper
2020-12-04 14:51 ` Glenn Washburn
2020-11-27 9:03 ` [PATCH v6 08/12] luks2: Error check segment.sector_size Glenn Washburn
2020-12-03 13:52 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 09/12] whitespace: convert 8 spaces to tabs Glenn Washburn
2020-12-03 13:53 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 10/12] mips: Enable __clzdi2() Glenn Washburn
2020-12-03 14:00 ` Daniel Kiper
2020-12-03 15:58 ` Glenn Washburn
2020-12-04 13:07 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 11/12] misc: Add grub_log2ull macro for calculating log base 2 of 64-bit integers Glenn Washburn
2020-12-03 14:02 ` Daniel Kiper
2020-11-27 9:03 ` [PATCH v6 12/12] luks2: Use grub_log2ull to calculate log_sector_size and improve readability Glenn Washburn
2020-12-03 14:13 ` Daniel Kiper
2020-12-04 16:43 ` [PATCH v7 00/17] Cryptodisk fixes for v2.06 redux Glenn Washburn
2020-12-04 16:43 ` [PATCH v7 01/17] disk: Rename grub_disk_get_size to grub_disk_native_sectors Glenn Washburn
2020-12-06 13:24 ` Patrick Steinhardt
2020-12-07 19:38 ` Daniel Kiper
2020-12-04 16:43 ` [PATCH v7 02/17] misc: Add parentheses around ALIGN_UP and ALIGN_DOWN arguments Glenn Washburn
2020-12-06 13:24 ` Patrick Steinhardt
2020-12-07 19:50 ` Daniel Kiper
2020-12-04 16:43 ` [PATCH v7 03/17] luks2: Remove unused argument in grub_error Glenn Washburn
2020-12-06 13:25 ` Patrick Steinhardt
2020-12-07 19:52 ` Daniel Kiper
2020-12-08 17:45 ` Glenn Washburn
2020-12-08 18:32 ` Patrick Steinhardt
2020-12-04 16:43 ` [PATCH v7 04/17] luks2: Make sure all fields of output argument in luks2_parse_digest() are written to Glenn Washburn
2020-12-06 13:26 ` Patrick Steinhardt
2020-12-07 19:58 ` Daniel Kiper
2020-12-04 16:43 ` [PATCH v7 05/17] luks2: Add json_slot_key member to struct grub_luks2_keyslot/segment/digest Glenn Washburn
2020-12-06 13:29 ` Patrick Steinhardt
2020-12-07 20:02 ` Daniel Kiper
2020-12-08 4:06 ` Glenn Washburn
2020-12-08 6:38 ` Patrick Steinhardt
2020-12-08 17:55 ` Glenn Washburn
2020-12-04 16:43 ` [PATCH v7 06/17] luks2: Use more intuitive slot key instead of index in user messages Glenn Washburn
2020-12-06 13:31 ` Patrick Steinhardt
2020-12-07 20:15 ` Daniel Kiper
2020-12-08 17:56 ` Glenn Washburn
2020-12-04 16:43 ` [PATCH v7 07/17] luks2: Add string "index" to user strings using a json index Glenn Washburn
2020-12-06 13:31 ` Patrick Steinhardt
2020-12-07 20:17 ` Daniel Kiper
2020-12-04 16:43 ` [PATCH v7 08/17] cryptodisk: Add macro GRUB_TYPE_BITS() to replace some literals Glenn Washburn
2020-12-06 13:32 ` Patrick Steinhardt
2020-12-07 20:18 ` Daniel Kiper
2020-12-04 16:43 ` [PATCH v7 09/17] cryptodisk: Add macros GRUB_TYPE_U_MAX/MIN(type) to replace literals Glenn Washburn
2020-12-06 13:33 ` Patrick Steinhardt
2020-12-07 20:22 ` Daniel Kiper
2020-12-08 4:06 ` Glenn Washburn
2020-12-04 16:43 ` [PATCH v7 10/17] luks2: grub_cryptodisk_t->total_sectors is the max number of device native sectors Glenn Washburn
2020-12-06 13:34 ` Patrick Steinhardt
2020-12-04 16:43 ` [PATCH v7 11/17] cryptodisk: Properly handle non-512 byte sized sectors Glenn Washburn
2020-12-06 19:21 ` Patrick Steinhardt
2020-12-04 16:43 ` [PATCH v7 12/17] luks2: Better error handling when setting up the cryptodisk Glenn Washburn
2020-12-06 19:35 ` Patrick Steinhardt
2020-12-08 4:04 ` Glenn Washburn
2020-12-08 6:41 ` Patrick Steinhardt
2020-12-08 4:28 ` Glenn Washburn
2020-12-04 16:43 ` [PATCH v7 13/17] luks2: Error check segment.sector_size Glenn Washburn
2020-12-06 19:35 ` Patrick Steinhardt
2020-12-04 16:43 ` [PATCH v7 14/17] whitespace: convert 8 spaces to tabs Glenn Washburn
2020-12-06 13:35 ` Patrick Steinhardt
2020-12-04 16:43 ` [PATCH v7 15/17] mips: Enable __clzdi2() Glenn Washburn
2020-12-06 19:36 ` Patrick Steinhardt
2020-12-04 16:43 ` [PATCH v7 16/17] misc: Add grub_log2ull macro for calculating log base 2 of 64-bit integers Glenn Washburn
2020-12-06 13:36 ` Patrick Steinhardt
2020-12-04 16:43 ` [PATCH v7 17/17] luks2: Use grub_log2ull to calculate log_sector_size and improve readability Glenn Washburn
2020-12-06 19:44 ` Patrick Steinhardt
2020-12-06 13:38 ` [PATCH v7 00/17] Cryptodisk fixes for v2.06 redux Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 00/18] " Glenn Washburn
2020-12-08 22:45 ` [PATCH v8 01/18] disk: Rename grub_disk_get_size to grub_disk_native_sectors Glenn Washburn
2020-12-09 17:39 ` Daniel Kiper
2020-12-08 22:45 ` [PATCH v8 02/18] misc: Add parentheses around ALIGN_UP and ALIGN_DOWN arguments Glenn Washburn
2020-12-08 22:45 ` [PATCH v8 03/18] whitespace: convert 8 spaces to tabs Glenn Washburn
2020-12-08 22:45 ` [PATCH v8 04/18] luks2: Remove unused argument in grub_error Glenn Washburn
2020-12-08 22:45 ` [PATCH v8 05/18] luks2: Make sure all fields of output argument in luks2_parse_digest() are written to Glenn Washburn
2020-12-08 22:45 ` [PATCH v8 06/18] luks2: Add idx member to struct grub_luks2_keyslot/segment/digest Glenn Washburn
2020-12-09 18:02 ` Daniel Kiper
2020-12-12 8:07 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 07/18] luks2: Use more intuitive object name instead of json index in user messages Glenn Washburn
2020-12-09 18:05 ` Daniel Kiper
2020-12-12 8:09 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 08/18] luks2: Rename json index variables to names that they are obviously json indexes Glenn Washburn
2020-12-09 18:07 ` Daniel Kiper
2020-12-12 8:10 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 09/18] luks2: Add string "index" to user strings using a json index Glenn Washburn
2020-12-09 18:09 ` Daniel Kiper
2020-12-12 8:11 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 10/18] cryptodisk: Add macro GRUB_TYPE_BITS() to replace some literals Glenn Washburn
2020-12-09 18:12 ` Daniel Kiper
2020-12-12 8:12 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 11/18] cryptodisk: Add macros GRUB_TYPE_U_MAX/MIN(type) to replace literals Glenn Washburn
2020-12-10 14:51 ` Daniel Kiper
2020-12-12 8:13 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 12/18] luks2: grub_cryptodisk_t->total_sectors is the max number of device native sectors Glenn Washburn
2020-12-12 8:14 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 13/18] cryptodisk: Properly handle non-512 byte sized sectors Glenn Washburn
2020-12-12 8:15 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 14/18] luks2: Better error handling when setting up the cryptodisk Glenn Washburn
2020-12-10 16:07 ` Daniel Kiper
2020-12-12 1:10 ` Glenn Washburn
2020-12-12 15:19 ` Daniel Kiper
2020-12-15 22:23 ` Glenn Washburn
2020-12-08 22:45 ` [PATCH v8 15/18] luks2: Error check segment.sector_size Glenn Washburn
2020-12-10 16:08 ` Daniel Kiper
2020-12-12 8:16 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 16/18] mips: Enable __clzdi2() Glenn Washburn
2020-12-10 16:09 ` Daniel Kiper
2020-12-12 8:16 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 17/18] misc: Add grub_log2ull macro for calculating log base 2 of 64-bit integers Glenn Washburn
2020-12-12 8:17 ` Patrick Steinhardt
2020-12-08 22:45 ` [PATCH v8 18/18] luks2: Use grub_log2ull to calculate log_sector_size and improve readability Glenn Washburn
2020-12-12 8:18 ` Patrick Steinhardt
2020-12-10 16:20 ` [PATCH v8 00/18] Cryptodisk fixes for v2.06 redux Daniel Kiper
2020-12-12 8:20 ` Patrick Steinhardt
2020-12-12 14:40 ` Daniel Kiper
2020-12-12 17:36 ` Patrick Steinhardt
2020-12-14 12:13 ` Daniel Kiper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a165791de0d39f466db79430699c1e2f38b7bf3c.1601765266.git.development@efficientek.com \
--to=development@efficientek.com \
--cc=dkiper@net-space.pl \
--cc=grub-devel@gnu.org \
--cc=ps@pks.im \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox