From: Patrick Steinhardt <ps@pks.im>
To: grub-devel@gnu.org
Cc: Patrick Steinhardt <ps@pks.im>, Daniel Kiper <dkiper@net-space.pl>
Subject: [PATCH v7 0/6] Support for LUKS2 disk encryption
Date: Fri, 27 Dec 2019 16:18:33 +0100 [thread overview]
Message-ID: <cover.1577459435.git.ps@pks.im> (raw)
In-Reply-To: <cover.1572717208.git.ps@pks.im>
Hi,
this is hopefully the last version of this patchset. The previous
version was rejected due to compile issues on 32 bit platforms,
which I didn't test before. Anyway, this version should fix these
issues by
- using correct types where appropriate (grub_uint64_t
instead of grub_size_t)
- using grub_divmod64() for 64 bit division
This got i386 working for me, but I didn't have any arm32
platform available. Chances are good it's fixed on both
platforms, though. As always, the range-diff against v6 can be
found below.
Patrick
Patrick Steinhardt (6):
json: Import upstream jsmn-1.1.0
json: Implement wrapping interface
bootstrap: Add gnulib's base64 module
afsplitter: Move into its own module
luks: Move configuration of ciphers into cryptodisk
disk: Implement support for LUKS2
Makefile.util.def | 4 +-
bootstrap.conf | 3 +-
conf/Makefile.extra-dist | 1 +
docs/grub-dev.texi | 14 +
docs/grub.texi | 5 +-
grub-core/Makefile.core.def | 19 +-
grub-core/disk/AFSplitter.c | 3 +
grub-core/disk/cryptodisk.c | 163 ++++-
grub-core/disk/luks.c | 190 +----
grub-core/disk/luks2.c | 678 ++++++++++++++++++
grub-core/lib/gnulib-patches/fix-base64.patch | 23 +
grub-core/lib/json/jsmn.h | 468 ++++++++++++
grub-core/lib/json/json.c | 267 +++++++
grub-core/lib/json/json.h | 122 ++++
include/grub/cryptodisk.h | 3 +
15 files changed, 1783 insertions(+), 180 deletions(-)
create mode 100644 grub-core/disk/luks2.c
create mode 100644 grub-core/lib/gnulib-patches/fix-base64.patch
create mode 100644 grub-core/lib/json/jsmn.h
create mode 100644 grub-core/lib/json/json.c
create mode 100644 grub-core/lib/json/json.h
Range-diff against v6:
1: 2469e96f9 = 1: 2469e96f9 json: Import upstream jsmn-1.1.0
2: 88d2b083d ! 2: c67fda9fb json: Implement wrapping interface
@@ Commit message
`grub_json_t`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
## grub-core/lib/json/json.c ##
@@
3: 411a822b4 = 3: dcca930de bootstrap: Add gnulib's base64 module
4: be0859313 = 4: f922aabda afsplitter: Move into its own module
5: 8535bb34a = 5: 3d397ac30 luks: Move configuration of ciphers into cryptodisk
6: f9b578487 ! 6: 59d36e0e9 disk: Implement support for LUKS2
@@ grub-core/disk/luks2.c (new)
+luks2_parse_digest (grub_luks2_digest_t *out, const grub_json_t *digest)
+{
+ grub_json_t segments, keyslots, o;
++ grub_size_t i, size;
++ grub_uint64_t bit;
+ const char *type;
-+ grub_size_t i, size, bit;
+
+ if (grub_json_getstring (&type, digest, "type"))
+ return grub_error (GRUB_ERR_BAD_ARGUMENT, "Invalid digest type");
@@ grub-core/disk/luks2.c (new)
+ const grub_json_t *root, grub_size_t i)
+{
+ grub_json_t keyslots, keyslot, digests, digest, segments, segment;
-+ grub_size_t j, idx, size;
++ grub_size_t j, size;
++ grub_uint64_t idx;
+
+ /* Get nth keyslot */
+ if (grub_json_getvalue (&keyslots, root, "keyslots") ||
@@ grub-core/disk/luks2.c (new)
+ grub_dprintf ("luks2", "Trying keyslot %"PRIuGRUB_SIZE"\n", i);
+
+ /* Set up disk according to keyslot's segment. */
-+ crypt->offset = segment.offset / segment.sector_size;
++ crypt->offset = grub_divmod64 (segment.offset, segment.sector_size, NULL);
+ crypt->log_sector_size = sizeof (unsigned int) * 8
+ - __builtin_clz ((unsigned int) segment.sector_size) - 1;
+ if (grub_strcmp (segment.size, "dynamic") == 0)
--
2.24.1
next prev parent reply other threads:[~2019-12-27 15:18 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-02 18:06 [PATCH 0/6] Support for LUKS2 disc encryption Patrick Steinhardt
2019-11-02 18:06 ` [PATCH 1/6] jsmn: Add JSON parser Patrick Steinhardt
2019-11-02 18:06 ` [PATCH 2/6] jsmn: Add convenience functions Patrick Steinhardt
2019-11-04 10:26 ` Max Tottenham
2019-11-04 11:00 ` Patrick Steinhardt
2019-11-04 17:42 ` Daniel Kiper
2019-11-04 18:56 ` Patrick Steinhardt
2019-11-06 11:44 ` Daniel Kiper
2019-11-06 13:08 ` Patrick Steinhardt
2019-11-13 11:16 ` Daniel Kiper
2019-11-02 18:06 ` [PATCH 3/6] bootstrap: Add gnulib's base64 module Patrick Steinhardt
2019-11-04 10:30 ` Max Tottenham
2019-11-04 11:02 ` Patrick Steinhardt
2019-11-02 18:06 ` [PATCH 4/6] afsplitter: Move into its own module Patrick Steinhardt
2019-11-02 18:06 ` [PATCH 5/6] luks: Move configuration of ciphers into cryptodisk Patrick Steinhardt
2019-11-02 18:06 ` [PATCH 6/6] disk: Implement support for LUKS2 Patrick Steinhardt
2019-11-05 6:58 ` [PATCH v2 0/6] Support for LUKS2 disk encryption Patrick Steinhardt
2019-11-05 6:58 ` [PATCH v2 1/6] json: Import upstream jsmn-1.1.0 Patrick Steinhardt
2019-11-05 6:58 ` [PATCH v2 2/6] json: Implement wrapping interface Patrick Steinhardt
2019-11-05 9:54 ` Max Tottenham
2019-11-05 6:58 ` [PATCH v2 3/6] bootstrap: Add gnulib's base64 module Patrick Steinhardt
2019-11-06 12:04 ` Daniel Kiper
2019-11-05 6:58 ` [PATCH v2 4/6] afsplitter: Move into its own module Patrick Steinhardt
2019-11-06 12:06 ` Daniel Kiper
2019-11-05 6:58 ` [PATCH v2 5/6] luks: Move configuration of ciphers into cryptodisk Patrick Steinhardt
2019-11-06 12:22 ` Daniel Kiper
2019-11-05 6:58 ` [PATCH v2 6/6] disk: Implement support for LUKS2 Patrick Steinhardt
2019-11-13 13:22 ` [PATCH v3 0/6] Support for LUKS2 disk encryption Patrick Steinhardt
2019-11-13 13:22 ` [PATCH v3 1/6] json: Import upstream jsmn-1.1.0 Patrick Steinhardt
2019-11-14 10:15 ` Daniel Kiper
2019-11-13 13:22 ` [PATCH v3 2/6] json: Implement wrapping interface Patrick Steinhardt
2019-11-14 12:37 ` Daniel Kiper
2019-11-14 13:12 ` Patrick Steinhardt
2019-11-15 11:56 ` Daniel Kiper
2019-11-15 12:36 ` Patrick Steinhardt
2019-11-18 14:45 ` Daniel Kiper
2019-11-26 6:22 ` Patrick Steinhardt
2019-11-13 13:22 ` [PATCH v3 3/6] bootstrap: Add gnulib's base64 module Patrick Steinhardt
2019-11-13 13:22 ` [PATCH v3 4/6] afsplitter: Move into its own module Patrick Steinhardt
2019-11-13 13:22 ` [PATCH v3 5/6] luks: Move configuration of ciphers into cryptodisk Patrick Steinhardt
2019-11-13 13:22 ` [PATCH v3 6/6] disk: Implement support for LUKS2 Patrick Steinhardt
2019-11-15 12:31 ` Daniel Kiper
2019-11-15 12:55 ` Patrick Steinhardt
2019-11-18 8:45 ` [PATCH v4 0/6] Support for LUKS2 disk encryption Patrick Steinhardt
2019-11-18 8:45 ` [PATCH v4 1/6] json: Import upstream jsmn-1.1.0 Patrick Steinhardt
2019-11-18 8:45 ` [PATCH v4 2/6] json: Implement wrapping interface Patrick Steinhardt
2019-11-18 14:14 ` Daniel Kiper
2019-11-18 15:46 ` Patrick Steinhardt
2019-11-18 16:29 ` Daniel Kiper
2019-11-18 8:45 ` [PATCH v4 3/6] bootstrap: Add gnulib's base64 module Patrick Steinhardt
2019-11-18 8:45 ` [PATCH v4 4/6] afsplitter: Move into its own module Patrick Steinhardt
2019-11-18 8:45 ` [PATCH v4 5/6] luks: Move configuration of ciphers into cryptodisk Patrick Steinhardt
2019-11-18 8:45 ` [PATCH v4 6/6] disk: Implement support for LUKS2 Patrick Steinhardt
2019-11-18 14:33 ` Daniel Kiper
2019-11-29 6:51 ` [PATCH v5 0/6] Support for LUKS2 disk encryption Patrick Steinhardt
2019-11-29 6:51 ` [PATCH v5 1/6] json: Import upstream jsmn-1.1.0 Patrick Steinhardt
2019-11-29 6:51 ` [PATCH v5 2/6] json: Implement wrapping interface Patrick Steinhardt
2019-11-29 15:34 ` Daniel Kiper
2019-12-06 17:24 ` Patrick Steinhardt
2019-12-08 22:49 ` Daniel Kiper
2019-11-29 6:51 ` [PATCH v5 3/6] bootstrap: Add gnulib's base64 module Patrick Steinhardt
2019-11-29 6:51 ` [PATCH v5 4/6] afsplitter: Move into its own module Patrick Steinhardt
2019-11-29 6:51 ` [PATCH v5 5/6] luks: Move configuration of ciphers into cryptodisk Patrick Steinhardt
2019-11-29 6:51 ` [PATCH v5 6/6] disk: Implement support for LUKS2 Patrick Steinhardt
2019-12-10 9:26 ` [PATCH v6 0/6] Support for LUKS2 disk encryption Patrick Steinhardt
2019-12-10 9:26 ` [PATCH v6 1/6] json: Import upstream jsmn-1.1.0 Patrick Steinhardt
2019-12-10 9:26 ` [PATCH v6 2/6] json: Implement wrapping interface Patrick Steinhardt
2019-12-13 18:56 ` Daniel Kiper
2019-12-10 9:26 ` [PATCH v6 3/6] bootstrap: Add gnulib's base64 module Patrick Steinhardt
2019-12-10 9:26 ` [PATCH v6 4/6] afsplitter: Move into its own module Patrick Steinhardt
2019-12-10 9:26 ` [PATCH v6 5/6] luks: Move configuration of ciphers into cryptodisk Patrick Steinhardt
2019-12-10 9:26 ` [PATCH v6 6/6] disk: Implement support for LUKS2 Patrick Steinhardt
2019-12-16 12:25 ` Daniel Kiper
2019-12-16 12:37 ` Patrick Steinhardt
2019-12-16 13:05 ` Daniel Kiper
2019-12-16 13:10 ` Patrick Steinhardt
2019-12-16 13:15 ` Daniel Kiper
2019-12-20 19:33 ` [PATCH v6 0/6] Support for LUKS2 disk encryption Daniel Kiper
2019-12-27 15:08 ` Patrick Steinhardt
2019-12-27 15:18 ` Patrick Steinhardt [this message]
2019-12-27 15:18 ` [PATCH v7 1/6] json: Import upstream jsmn-1.1.0 Patrick Steinhardt
2019-12-27 15:18 ` [PATCH v7 2/6] json: Implement wrapping interface Patrick Steinhardt
2019-12-27 15:18 ` [PATCH v7 3/6] bootstrap: Add gnulib's base64 module Patrick Steinhardt
2019-12-27 15:18 ` [PATCH v7 4/6] afsplitter: Move into its own module Patrick Steinhardt
2019-12-27 15:18 ` [PATCH v7 5/6] luks: Move configuration of ciphers into cryptodisk Patrick Steinhardt
2019-12-27 15:18 ` [PATCH v7 6/6] disk: Implement support for LUKS2 Patrick Steinhardt
2020-01-10 14:23 ` [PATCH v7 0/6] Support for LUKS2 disk encryption Daniel Kiper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1577459435.git.ps@pks.im \
--to=ps@pks.im \
--cc=dkiper@net-space.pl \
--cc=grub-devel@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox